Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

REMOVABLE STORAGE (

Active
SPRPA126QZB40Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued under Emergency Acquisition Flexibilities Authority, seeks removable storage solutions under NAICS code 333998 with a size standard of 1,250 employees, and is designated as a critical application item. The contract requires full compliance with numerous federal acquisition regulations including mandatory use of Workflow Pro’s Assist Module, strict adherence to Buy American provisions under the Free Trade Agreements and Balance of Payments Program, and certification of recovered material content for EPA-designated products. The contractor must also ensure equal opportunity for veterans and workers with disabilities, implement item unique identification and valuation procedures, and follow WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS linked to the invoice and receiving report combo referenced under SPRPA1. Transportation of supplies by sea is permitted, and royalty information must be provided as required. No drawings are available, and the acquisition is being conducted under urgent conditions with a response deadline of August 17, 2026. The contract is administered by the Department of Defense’s Defense Logistics Agency Aviation office in Philadelphia, with Jonathan M. Rivera as the primary point of contact.

General Info

Emergency procurement for removable storage under Buy American rules, with EPA compliance, veteran hiring, and DLA Aviation oversight.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||X|TBD||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT COMBO|N/A|TBD|SPRPA1|TBD|TBD|SEE SCHEDULE|TBD|N/A|N/A|TBD|N/A|N/A|N/A|N/A|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|Robyn.Grinarml@dla.mil| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| No drawings are available for this Request for Quotation. This solicitation is being solicited under Emergency Acquisition Flexibilities(EAF) Authority formally known as Special Emergency Procurement Authority(SEPA). NAICS Code: 334111 Size Standard: 1,250 THIS IS A CRITICAL APPLICATION ITEM \

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, CYLINDER ST
Solicitation # SPE8E9-26-T-3323
The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
HEAD, SPRINKLER, FIRE
Solicitation # SPE8E6-26-T-4007
This contract pertains to the procurement of four brass fire protection sprinkler heads, specifically the Bete Fog Nozzle model 2-1/2 inch SCF70W, identified by NSN 4210-01-386-3436, under solicitation SPE8E6-26-T-4007. The items must be delivered FOB origin within 167 days of contract award, with delivery required by February 1, 2027, despite an original required date of November 15, 2026. The quantity is fixed at four units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes, while palletization follows DLA’s RP001 requirements. Hazardous materials guidelines are strictly enforced, prohibiting intentional use of mercury or mercury-containing compounds unless explicitly exempted, such as in certain batteries or instruments, which must include secondary containment per NAVSEA 5100-003D. All shipments must be labeled and addressed to DLA Distribution at the New Cumberland, Pennsylvania facility, following DLA’s transportation and shipping protocols. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. The contract prohibits the inclusion of covered defense information and mandates full compliance with all applicable federal procurement and safety standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8E6-26-T-3992
The contract specifies the procurement of a fire fighting hose reducer, part number 13218E0470-42, constructed from cast or forged brass in accordance with MIL-DTL-52404C, featuring a 2.5-inch National Hose internal thread with swivel and a 1.5-inch National Hose external thread. Plating is not required, and first article testing is mandatory with two units submitted for testing under government quality assurance representative observation, as dictated by MIL-C-52404C and referenced quality assurance provisions. The item is governed by strict inspection and acceptance protocols at origin, with sampling to comply with MIL-STD-1916 or comparable zero-based plans, and non-conformances not permitted unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking requirements. The contract includes a separate line item for the first article test unit priced at $1.00, which is non-reimbursable if the test requirement is waived, and the main procurement line item for 11 units at $11.00 each totaling $121.00, with delivery required within 227 days FOB origin to the DLA New Cumberland facility. All technical and quality requirements referenced are incorporated via the DLA Master List, including specific provisions for casting and forging assistance requests if tooling is unavailable to the contractor. The drawing and specification control revisions are detailed and dated, with the governing standard being MIL-DTL-52404C, and the product classified as Type XV, Class D. The contract explicitly prohibits government identification removal from non-accepted supplies and includes protections for covered defense information. Delivery is restricted to the specified origin point with zero variance allowed in quantity, and transportation logistics are governed by specific DLA procedural notes. The solicitation number is SPE8E6-26-T-3992, with a response deadline in August 2026 and a required delivery date set for April 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SEAL, TAMPER PROOF
Solicitation # SPE8E6-26-T-4062
The contract is for the procurement of tamper-proof seals under solicitation SPE8E6-26-T-4062, issued by DLA Dist San Joaquin under a Women-Owned Small Business Set-Aside, with a NAICS code of 333998. The item, identified by NSN 4210-01-446-1015 and part numbers 322-YELLOW and 6630000-Y, is to be supplied in a quantity of 252 MX with a firm fixed price and no variance allowed in quantity. Delivery is required within 69 days of award, FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, CA. All packaging must comply with DLA’s master technical and quality requirements, incorporating MIL-STD-129 labeling, and adhere to either Fed-Std-313 for hazardous materials under IP025 or ASTM D3951 for non-hazardous items, with DLA standards taking precedence. Packaging and palletization must meet RP001 requirements, and the unit of issue and quantity per unit pack must align precisely with the contract specifications. The delivery must be completed by February 12, 2027, with an original ship date of October 26, 2026, and transportation logistics are governed by DLA procurement notes C19 and C20. All technical and quality standards referenced are controlled by the DLA Master List effective on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
COUPLING ASSEMBLY, HOSE
Solicitation # SPE8E9-26-T-3300
The contract is for the procurement of four coupling assemblies, hose, fire fighting, identified by NSN 4210-00-368-2904 and part number 502, manufactured by Service Brass and Aluminum Foundry in Phoenix, AZ. Each coupling is brass with both ends female, featuring a 2-1/2 inch NH swivel interface with eight flat lugs and must be marked in accordance with MIL-STD-130 Section 5.3.1. Configuration control follows MIL-STD-973, excluding specific subparts. The product must not contain intentionally added mercury or mercury-containing compounds, except for limited functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is scheduled for 167 days after award, with FOB origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination. The shipment must be sent to the DLA Distribution facility in New Cumberland, PA, under the parcel post address provided, and transportation instructions follow DLAD Proc Notes C19 and C20. The original required delivery date is October 27, 2026, with a needed ship date of February 1, 2027. The solicitation was issued under SPE8E9-26-T-3300 with a response deadline of August 17, 2026, and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with covered defense information potentially applicable. The unit of issue is each (EA), and the contract falls under NAICS code 333998 with the Department of Defense as the contracting agency.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE8EF-26-T-1575
This contract is for the procurement of 260 units of cargo vehicle tie-downs under the NSN 3990-01-619-7774 and part number 592736, issued by the Defense Logistics Agency through solicitation SPE8EF-26-T-1575. The requirement is set as a total small business set-aside, with delivery due 167 days after award, no later than February 1, 2027, and must be shipped FOB origin with zero variance in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and packaged according to MIL-STD-129, with palletization following DLA Packaging Requirements. The unit price is $260.00 per unit, totaling $67,600.00, and inspection and acceptance occur at the destination. The supplies are to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by specific DLA procedural notes C19 and C20. Government identification must be removed from non-accepted supplies, and the contract incorporates provisions for covered defense information. The point of contact for inquiries is Russell Keiser, and the NAICS code is 333998.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE
Solicitation # SPE8E6-26-T-3991
The contract is for the procurement of two tube assemblies for a fire extinguishing system, identified by part number 65506-09014-042 and NSN 4210000895252, to be supplied by ROTAIR AIRCRAFT CORP to SIKORSKY AIRCRAFT CORP. The item must conform to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. All packaging and labeling must comply with MIL-STD-129 and DLA’s packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification and is subject to Covered Defense Information protocols. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and the delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, with a required delivery date of February 1, 2027, and a lead time of 167 days from the contract award. The unit of issue is each, with a total contract value based on the specified quantity. The contract is issued under solicitation SPE8E6-26-T-3991 with performance directed to DLA Distribution in San Diego, California, and procurement is restricted due to proprietary or insufficient data for competitive bidding.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, FIRE EXTINGUIS
Solicitation # SPE8E6-26-T-4002
The contract is for 54 fire extinguisher brackets with NSN 4210-01-147-6483, designated as a critical application item, specifically designed for use with the ANSUL Sentry Model 2013, 20-pound dry chemical extinguisher. The item manufacturer is TYCO FIRE PRODUCTS LP with part number 30937, and it must be painted red. All supplies must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation, including packaging method 10, dry climate control, and use of standard unit containers and intermediate containers. Packaging and marking must follow MIL-STD-129 with no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds in any hardware or supply, except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and the required delivery date is 76 days from the solicitation, with a need ship date of November 2, 2026, and original delivery date of November 4, 2026. The item is shipped to DLA Distribution at the New Cumberland facility in Pennsylvania, and transportation guidelines are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E6-26-T-4002, issued under a federal acquisition program with NAICS code 333998, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIP, NOZZLE, FIRE HOS
Solicitation # SPE8E6-26-T-4004
The contract pertains to the procurement of a tip, nozzle, and fire hose assembly identified by NSN 4210010963447 and part number 20330001 from Akron Brass Company, with a total quantity of 35 units to be delivered within 64 days of contract award. The delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified materials, methods, and markings, and palletization must adhere to DLA packaging requirements. All items must be free from intentional mercury or mercury-containing compounds, except for limited functional uses in approved devices such as batteries, fluorescent lights, or weapons systems, with mercury-containing portable items requiring dual containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements for compliance, and hazardous material shipping follows DLAD Proc Note C19, with delivery directed to the DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is October 29, 2026, with a need ship date of October 21, 2026, under solicitation SPE8E6-26-T-4004, issued by the Department of Defense through the Defense Logistics Agency.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1580
This contract is for the procurement of cargo tie-downs for vehicles under solicitation SPE8EF-26-T-1580, issued by the Defense Logistics Agency. The item, identified by NSN 3990-01-518-6574 and part number 15MTC/1748, is to be delivered in a quantity of four AY units with a delivery window of 167 days from the contract award. Delivery is FOB origin, and inspection and acceptance occur at the destination location. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization as outlined in the DLA Master List of Technical and Quality Requirements referenced by R-numbers. Marking must follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA standards. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with narrow exceptions for functional uses in batteries, instruments, weapon systems, and specified reagents, and requires mercury-containing portable lamps and instruments to have shockproof design and secondary containment in compliance with NAVSEA 5100-003D. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of July 19, 2027, though a need ship date of February 1, 2027, has been specified. The contract includes strict quality controls, government-mandated compliance with technical specifications, and transportation rules outlined in DLAD procedural notes.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
HEAD, SPRINKLER, FIRE PR
Solicitation # SPE8E6-26-T-4060
The contract pertains to the procurement of 200 fire protection sprinkler heads under NSN 4210-01-231-7168, issued by DLA Dist San Joaquin under solicitation SPE8E6-26-T-4060, with a response deadline of August 17, 2026, and a delivery requirement of 127 days after order. The item is procured in full competition in accordance with military or federal specifications, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA web portal, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively, with unspecified attributes deemed major. The drawing for the item is available only during open solicitation via the DIBBS portal, and covered defense information potentially applies, requiring compliance with applicable security protocols. All supplies must be free of government identification if not accepted, and the place of performance is Tracy, CA, 95304-5000, with primary point of contact John Lieb reachable via email and phone for inquiries.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 333612
New
Federal
COUPLING,SHAFT,RIGI
Solicitation # SPRPA126QRC42
This solicitation for a rigid shaft coupling under SPRPA126QRC42 is issued under Emergency Acquisition Flexibilities and requires government-approved sources only; proposals from unauthorized distributors or non-approved suppliers will be rejected outright. All submitted items must be newly manufactured with no refurbished, remanufactured, or repaired materials permitted. The acquisition involves FMS customer-owned spares that are never owned by the U.S. Government or entered into the DoD supply chain, exempting them from Item Unique Identification and Valuation requirements per NAVSUP WSS N2 guidance, though Critical Safety Items are subject to identification under DFARS 252.209-7010. Delivery is governed by FMS-specific shipping instructions and transportation by sea, with warranty provisions requiring 12 months of coverage and 45 days after discovery for claims. Buy American and related certification requirements apply, and contractors must comply with security prohibitions, equal opportunity mandates for veterans and workers with disabilities, and mandatory use of Workflow Pro Assist Module. Invoicing follows a combined invoice and receiving report format, and all offers must include proof of authorized distributive status from the approved manufacturer on official letterhead. Government source approval is mandatory, and technical data or drawings are not provided. Compliance with integrity of unit prices, value engineering, and contractor business systems is incorporated by reference, with inspections conducted at the source under Product Verification Testing provisions.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVB77
This contract specifies requirements for the manufacture and delivery of shipping and storage containers under solicitation SPRPA126RVB77, with primary emphasis on rigorous quality control, material standards, and manufacturing procedures. The container must be fabricated from aluminum in strict accordance with Container Research Corporation drawing number 05259-612E001, latest revision, and all referenced specifications, including MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID must be procured from NAVICP, and compliance with MIL-STD-2073 for packaging is required. Welding processes must adhere to MIL-W-22248 Class 4 for aluminum, with specific filler materials (4043 for 6061 alloy, 5356 or 5556 for 5000 series), and welders must be qualified under MIL-STD-1595A. Surface preparation demands chemical deoxidization with approved acid solutions no more than 10 days prior to welding (reduced to 3 days under outdoor exposure), followed by mechanical cleaning using approved methods only. All welds must be inspected visually with 5X magnification where necessary, and critical welds may require dye penetrant testing. Desiccant must be included per cubic foot of interior volume per MIL-D-3464 Type II, and cadmium plating is prohibited—replaced by zinc-nickel alloy finish per ASTM B841. The contract mandates a First Article Test (FAT), requiring the contractor to submit one unit within 120 calendar days to a designated government facility for dimensional, functional, leak, and drop testing. The FAT includes a 18-inch free fall test, pneumatic pressure leakage verification, form and fit evaluation, and compliance verification with drawing 612E001. The contractor bears all costs related to FAT submission, testing, repairs, and shipping, with government testing estimated at $12,000. Approved FAT units may be counted as production items only if undamaged and approved by the QAR. Suppliers must certify that production occurs in the same facility as the FAT unit. Waivers to FAT are available only to vendors with identical prior deliveries within three years, using the same processes and facilities, and must be accompanied by dual pricing. 100% production leak testing is required for every unit using Federal Test Method
Other Metal Container Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
Federal
28--VALVE,BLEED START
Solicitation # SPRPA126QYC95
The contract solicitation pertains to the procurement of 57 newly manufactured bleed start valves, identified by NSN 0R-2840-016666867-B8 and reference number 5146T31P01, with delivery terms set at FOB origin. This procurement is classified as an emergency acquisition under FAR 5.202(a)(2), which waives the synopsis requirement due to urgency, and is structured as a sole-source action under FAR 6.302-1. Only government-approved sources of supply are eligible for award; refurbished, remanufactured, or repaired items are unacceptable. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is flight-critical and requires government source approval prior to award, as the technical data necessary for full and open competition is either inadequate or exclusively held by the approved source, and the qualification of a new supplier would delay delivery beyond operational needs. Offerors must comply with DFARS clauses 252.209-7010 for Critical Safety Item identification and 252.242-7005 for Contractor Business Systems, along with DLAD clause 46.292 for product verification testing at the source. To be considered, all offerors must submit complete documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, either detailing their experience producing identical or similar items or demonstrating capability if the item is new to their production line. Those with pending source approval requests at NAVSUP WSS must include a copy of their submission cover letter. Failure to provide all required information renders a proposal technically unacceptable and ineligible for award. The solicitation was posted on August 5, 2026, with a response deadline of September 21, 2026, and is managed by the Department of Defense, DLA Aviation office in Philadelphia. Proposals received within 45 days of posting may be evaluated, and the Government retains full discretion to determine whether competition is warranted. The point of contact for all submissions and inquiries is Brett N. Duffey, with email and phone details provided for direct communication.
Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER, RADAR,
Solicitation # SPRPA126RXA69
The contract involves the procurement of a single unit of a radar transmitter, identified by NSN 7R-5841-015873027-P8, under solicitation number SPRPA126RXA69, with delivery specified FOB origin. Issued by the Department of Defense through Pa DLA Aviation at Philadelphia, this acquisition is conducted under Emergency Acquisition Flexibilities, emphasizing the urgency and critical nature of the item. The contract strictly requires newly manufactured spare parts only, explicitly prohibiting refurbished, remanufactured, or repaired materials. This is a critical application item, necessitating that the source of the parts be approved by the design control activity to ensure quality, given the specialized engineering skills and manufacturing knowledge required. The approved source holds essential data rights and proprietary technical information, which are not economically transferable to the Government, maintaining the integrity and performance standards of the part. Any alternative suppliers must undergo a rigorous qualification process aligned with the design control activity’s procedures and must be approved by the cognizant Government engineering authority responsible for the part’s specific application. The response deadline for offers is March 30, 2026. The contract is managed from Philadelphia, PA, with Mary S. Lindsay as the primary point of contact for this solicitation. The emphasis on maintaining strict source approval and quality compliance highlights the critical role of this radar transmitter within defense operations and the necessity of adherence to established acquisition protocols under emergency provisions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC96
The contract solicitation is for 648 newly manufactured turbine rotor blades, NSN 0R-2840-016995266-B8, under emergency acquisition authorities with a waived synopsis due to urgency. All items must be newly manufactured with no acceptance of refurbished, remanufactured, or repaired components. Only government-approved sources are eligible for award, and any distributor must submit an authorized distributor letter on the approved source’s letterhead at time of proposal submission. The part is classified as flight critical and has an unstable design, with known performance issues and anticipated configurational changes that will render the current version obsolete. Due to these technical uncertainties and critical safety implications, Government source approval is mandatory prior to contract award, and only previously approved sources have been solicited. New sources must submit comprehensive documentation per NAVSUP WSS Source Approval Brochures for spares or repair, and failure to provide complete data will render an offer ineligible. The requirement is being handled under FAR 6.302-1 as a sole-source action due to limited competition eligibility. Proposals are due by September 21, 2026, and must be submitted to the designated point of contact; failure to meet source approval requirements may still allow award based on Fleet support needs if timely approval cannot be secured.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--BLADE,COMPRESSOR,AI
Solicitation # SPRPA126QYC98
This solicitation is for 16 newly manufactured compressor blades designated as NSN 0R-2840-017141020-B8 under emergency acquisition authority, with delivery terms FOB origin. The procurement is strictly limited to approved government sources due to the critical safety nature of the item, which is flight critical and requires engineering source approval to ensure continued performance and quality. Refurbished, remanufactured, or repaired components are expressly prohibited, and only suppliers previously vetted and approved by the Government may submit bids. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is subject to DFARS Clause 252.209-7010 for Critical Safety Items and DLAD Clause 46.292 for product verification testing at the source. The Government retains exclusive access to proprietary technical data, manufacturing knowledge, and design control capabilities essential to the part’s integrity, which are not commercially available and cannot be replicated without the approved source’s expertise. Non-approved sources must submit comprehensive documentation per the NAVSUP Weapon Systems Support Source Approval Brochures—either for spares or repair—detailing experience with identical or similar items, and failure to provide this information will render proposals ineligible. Proposals must be received by September 21, 2026, and submission does not guarantee competition, as this procurement operates under FAR 6.302-1 as a sole-source action due to urgency and technical limitations. The contracting office is the Department of Defense’s DLA Aviation at Philadelphia, with Brett Duffey as the primary point of contact.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
DEOL ASSY ATH SHORT
Solicitation # SPRPA126QZB41
This contract pertains to the procurement of a critical shipboard assembly, specifically the DEOL ASSY ATH SHORT, designated for use in aircraft launch and recovery systems where failure could result in loss of life, aircraft, or vital shipboard functions. The item is classified as critical material, mandating strict adherence to MIL-STD-130 for marking and compliance with drawing 3975AS1400, Revision A, along with all referenced specifications. Manufacturing and inspection must follow rigorous quality assurance protocols, including 100% inspection of critical characteristics under the direct surveillance of a DCMA Quality Assurance Representative. NDT methods such as magnetic particle and penetrant inspection are required, and all testing must be conducted by NADCAP-accredited or ISO 17025-certified laboratories. The contractor is solely responsible for providing all tooling, fixtures, and test equipment, and no government-furnished items are authorized. Compliance with Buy American and Fair Trade Agreements is required, and the contractor must submit associated certifications. The solicitation was issued under Emergency Acquisition Flexibilities and is subject to additional federal requirements including mandatory use of Workflow Pro, veteran and disability equal opportunity provisions, and security exclusions. Packaging must conform to MIL-STD-2073, and all deliverables are to be submitted by August 17, 2026, with performance located in Philadelphia, PA. The NAICS code is 336413 with a size standard of 1,250 employees.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
Federal
VIDEO CARD,AIRCRAFT
Solicitation # SPRPA126QZB39
This solicitation seeks a video card for aircraft applications under Emergency Acquisition Flexibilities, with a NAICS code of 334412 and a size standard of 750 employees, designated as a critical application item. The contract requires strict adherence to federal compliance provisions including Buy American Act certifications, equal opportunity policies for veterans and workers with disabilities, security prohibitions, and mandatory use of Workflow Pro’s Assist Module. Payment instructions follow the Wide Area Workflow system using an invoice and receiving report combo, and item identification and valuation procedures outlined in the January 2023 guidance apply. No drawings are available, and the item must be delivered to the specified performance location, though details are unlisted. Compliance with EPA-reported recoverable material content requirements and royalty information obligations are also mandated. The solicitation, issued by the Department of Defense through the DLA Aviation office in Philadelphia, is open for responses through August 17, 2026, with Jonathan M. Rivera as the primary point of contact.
Bare Printed Circuit Board Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC97
The contract solicitation pertains to the procurement of 586 newly manufactured turbine rotor blades, identified by NSN 0R-2840-017141155-B8 and reference number 5144T23P02, to be delivered FOB origin. This is a single-source acquisition under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition, with only previously government-approved sources being solicited. Refurbished, remanufactured, or repaired parts are strictly prohibited, and all offers must be for brand-new components. Offerors not currently approved sources must submit complete documentation per NAVSUP WSS Source Approval Brochures to demonstrate manufacturing capability, including technical data on similar items or proof of prior approval under review. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at time of proposal submission. The acquisition is being conducted under emergency flexibility authority, waiving the standard synopsis requirement due to urgency. Government inspection and acceptance will occur at the manufacturer’s facility under DLAD clause 46.292, and the contract incorporates DFARS clauses 252.209-7010 for Critical Safety Item identification and potentially 252.242-7005 regarding contractor business systems. The point of contact for all submissions is Brett N. Duffey of the Defense Logistics Agency Aviation in Philadelphia, with proposals due by September 21, 2026. Any proposals lacking the required source approval documentation or failing to confirm prior submission of such data will be deemed technically unacceptable and ineligible for award. While the solicitation allows any responsible source to respond within 45 days, the government reserves full discretion to proceed without competition based on fleet support needs and timelines, and responses will be evaluated solely to determine if competitive procurement is feasible. No award will be delayed if source approval cannot be finalized in time to meet operational demands.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC31
The contract involves the procurement of 30 units of NSN 6K-8145-012622982-YX, with delivery terms specified as FOB origin, meaning the buyer assumes responsibility for the item once it leaves the supplier’s location. Engineering source approval is mandatory to ensure part quality, as only qualified sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge essential to maintaining performance standards. These approved sources hold exclusive data rights and technical information that are not economically accessible to the Government, making source restriction necessary. Any alternative supplier must undergo formal qualification through procedures approved by the cognizant Government engineering activity responsible for the part’s intended application, ensuring compliance with designated quality and technical requirements. This is a presolicitation notice issued under solicitation number SPRPA126RVC31, with a response deadline of September 2, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, Pennsylvania, with the primary point of contact being Makayla Hauser of APAC.41. The part’s technical specifications and sourcing restrictions indicate a reliance on niche suppliers with established expertise, and the Government retains strict oversight over qualification processes to safeguard mission-critical performance and supply chain integrity.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 332439
New
Federal
81--CONTAINER,SHIPPING
Solicitation # SPRPA126RVC30
The contract pertains to the acquisition of three units of a shipping container identified by NSN 6K-8145-015897584-B8, with delivery terms set at FOB origin. Engineering source approval is mandatory to ensure part quality, as only approved sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge necessary for proper production or maintenance. The technical data and manufacturing expertise retained by these approved sources are not economically accessible to the Government and are critical to sustaining the part’s performance and integrity. Any alternate supplier seeking to qualify must successfully navigate a stringent approval process governed by the design control activity and sanctioned by the cognizant Government engineering authority with jurisdiction over the component’s intended use. The procurement is issued under a total small business set-aside, indicating exclusive eligibility for small businesses, and is managed by the Department of Defense through the Defense Logistics Agency Aviation in Philadelphia. The solicitation was posted on July 18, 2026, with proposals due by September 2, 2026, and primary contact for inquiries is Makayla Hauser at the provided email and phone number.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC29
The contract pertains to the acquisition of 14 units of NSN 6K-8145-016275489-H5 under TDP VER 008, with delivery arranged FOB origin. The part is subject to strict engineering source approval requirements, mandated to ensure continued quality and performance integrity, as only qualified sources possess the unique design capability, specialized engineering skills, and proprietary manufacturing or repair knowledge essential to its production. These approved sources hold exclusive data rights and technical information that are not economically accessible to the Government, making reliance on them necessary for maintaining part fidelity. Any alternative supplier must undergo a formal qualification process established and approved by the cognizant Government engineering activity overseeing the part’s intended application, ensuring equivalency in design, function, and quality. The solicitation is a presolicitation issued under the Small Business Administration’s total small business set-aside program, reflecting a deliberate effort to prioritize small business participation. It is administered by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, with the response deadline set for September 2, 2026, and primary point of contact listed as Makayla Hauser.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details