Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on November 16, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

REMOVAL, DISPOSAL, AND RELINE BRAKE BANDS

Closed
W912EQ-13-Q-0007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, O-rings, and the clutch release spring, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and disengagement and confirming the PTO system operates correctly under load. This is a small business set-aside solicitation under NAICS code 811310, with a response deadline of November 3, 2026. Bids will be evaluated based on best value, requiring a lump sum fee, itemized costs, warranty information, and proof of necessary qualifications. Submission requirements include a bid sheet, a completed supplier packet with IRS Form W-9, proof of insurance, and applicable SBA certification letters. The contract incorporates various Federal Acquisition Regulation (FAR) clauses regarding small business utilization, equal opportunity, and labor standards, specifically adhering to Wage Determination No. 2015-4687 Revision 31 for Kentucky. Contractors must also comply with strict security protocols regarding non-public information and federal debarment disclosure requirements.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
SLED
Chiller Maintenance Services
Solicitation # 26FS0006
Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.
California Department of Veterans Affairs

POSTED

about 4 hours ago

DEADLINE

in 4 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

2915 Riverport Road, MEMPHIS, TN, 38109, USA

Set-Aside

NONE

Documents

1

RFQ.doc

DOC

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W07V Endist Memphis
Contacts1 person available
OfficeMEMPHIS, TN, 38103-1894, USA
Office AddressMEMPHIS, TN, 38103-1894, USA
Contacts
Amy L. StarksContract Specialist

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is W912EQ-13-Q-0007 and is being issued as a Request for Quote (RFQ). This procurement is being issued as UNRESTRICTED. The associated NAICS code is 811310 with $7.0 million size standard. All responsible sources may submit a quotation, which shall be considered by the agency. Quotes may be submitted in hard copy or electronically, either through regular mail, email, or by facsimile. Regardless of method of delivery, it is the offeror's responsibility to ensure receipt of quotes by the time and date stated herein. Contractors shall submit a lump sum quotation on attached RFQ to include all charges for all items as follows: DESCRIPTION/SPECIFICATIONS This requirement is for removal, disposal and replacement/reline of Asbestos Brake Bands. Contractor shall furnish all necessary labor, equipment, material, supervision, transportation and services required to perform the removal, disposal and reline of Asbestos Brake Bands for one (1) government owned crane, located at Ensley Engineer Yard, 2915 Riverport Road, Memphis, TN 38109. Crane Specifications are as follows: 1. Unit #9 4919 Crane, Model #BE1949, Serial #9W760, ID #BE4919, Manufacturer: Bucyrus Erie. Contractor shall be certified to remove and dispose of Asbestos brakes and shall submit quotes on attached RFQ. Contractor shall provide certifications prior to start of work. Contractor shall clean area after removal of asbestos brakes. DELIVERIES Deliveries - Quick turnaround is necessary in order for the Government to fulfill its mission. Therefore, the items to be supplied under this purchase order shall be disassembled and reassembled on site within thirty (30) days of award. Prior to delivery, the Contractor shall coordinate delivery with the following personnel to ensure someone is present. Primary - Jerry Britton +1 (555) 000-0000 office Matthew Young +1 (555) 000-0000 office Contractor shall submit completed clause 52.212-3, Offerors Representation and Certifications, Commercial Items. The following clauses and provisions are incorporated and will remain in full force in any resultant award. The full text of these clauses can be accessed electronically at website: http://www.farsite.hill.af.mil. FAR 52.204-99 -- System for Award Management Registration; FAR 52.212-1 - Instructions to Offerors--Commercial Items is applicable to this solicitation. The provisions at FAR 52.212-2 - Evaluation - Commercial Items - Apply to this solicitation, completed as follows: price being significantly more important than technical. FAR 52.212-3, Offeror Representation and Certifications--Commercial Items. FAR 52.212-4 - Contract Terms and Conditions--Commercial Items. FAR 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders--Commercial Items (Dev); FAR 52.219-6 Notice of Total Small Business Set-Aside, FAR 52.222-3 Convict Labor; FAR 52.222-19 Child Labor; FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26 Equal Opportunity; 52.222-36 Affirmative Action for Workers with Disabilities; FAR 52.225-13 Restrictions on Certain Foreign Purchases; FAR 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration; FAR 52.228-5 Insurance - Work on a Government Installation; FAR 52.237-2 - Protection of Government Buildings, Equipment, and Vegetation; FAR 52.237-34-F.O.B. Destination; FAR 52.252-2 Clauses Incorporated by Reference; DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statues or Executive Orders applicable to Defense Acquisitions of Commercial Items-FAR 252.225-7001 Buy America Act and Balance of Payments Program (JUN 2005); FAR 252.232-7003 Electronic Submission of Payment Requests; FAR 252.247-7023 Transportation of Supplies by Sea, Alternate III; and FAR 252.225-7002-Qualifying Country Sources as Subcontractors. Response to this combined synopsis/solicitation must be received via email, fax, mail, or delivery by 23 November 2012 No Later Than 3:00 PM (CST) local time at 167 North Main Street B202, Memphis, TN 38103. Quotes should be marked with solicitation number W912EQ-13-Q-0007 addressed to Amy Starks, Phone +1 (555) 000-0000, Fax +1 (555) 000-0000, email: contact@example.gov. Vendors not registered in System for Award Management Registration (SAM) database prior to award will not be eligible for award. Vendors may register for SAM by registering online at www.sam.gov.

More opportunities from Department Of Defense → W07V Endist Memphis

Same awarding agency

NAICS: 333914
New
Federal
Diesel Powered Trash Pump
Solicitation # W912EQ27QA004
Solicitation W912EQ27QA004 is a Firm Fixed Price purchase order issued by the Department of Defense for the procurement of two diesel-powered trash pumps and accessories for the Plant Section at the Ensley Engineer Yard. The required equipment must feature a Tier 4 77.3 cubic inch, 3-cylinder diesel engine producing 23.2HP with electric start, two operating speeds of 2700 and 3000 RPM, and a maximum flow rate of 1,096.3 gal/min. Technical specifications include a shimmable wear plate for abrasive conditions, a quick release clean out cover, and a 6 by 25 foot suction hose with quick connect. Delivery is set as FOB Destination to a facility in Memphis, Tennessee, with the contractor responsible for transportation costs. This opportunity is a total Small Business Set Aside under NAICS code 333914. The government will utilize the Lowest Price Technically Acceptable method for award, evaluating quotes based on technical acceptability, satisfactory past performance, and price reasonableness. A 10 percent price evaluation preference is available for HUBZone small business concerns. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation requires offerors to be registered in the System for Award Management and to comply with various federal regulations, including the Buy American and Balance of Payments Program and cybersecurity standards for safeguarding covered defense information.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333924
New
Federal
Man Lift
Solicitation # W912EQ27QA005
Solicitation W912EQ27QA005 is a firm fixed price requirement for the Department of Defense, specifically the W07V Endist Memphis, to acquire one electric-powered JLG man lift for use at the WG Huxtable Pumping Plant. The procurement is a total small business set-aside under NAICS code 333924. The equipment must feature one-touch controls for out-rigger deployment, a load sensing system for occupant safety, and an enhanced safety system utilizing a slim wire rope and magnet configuration. The estimated delivery date for the equipment is May 31, 2027, with the place of performance located at the Endist Memphis CW facility in Memphis, Tennessee. The contract specifies that inspection and acceptance will occur at the destination, managed by the KO Contracting Division. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system, requiring the contractor to maintain an active registration in the System for Award Management. Evaluation of offers includes a ten percent price preference for HUBZone small business concerns that have not waived the preference. Additionally, the contract incorporates various FAR and DFARS clauses, including requirements for sustainable products, the Buy American and Balance of Payments Program, and cybersecurity standards for safeguarding covered defense information.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS