This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 10, 2008. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Remove and Replace Vault Door

Closed

F3H3G38137A001Federal

Submission Closed06/20/2008, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 321911

New

Federal

Custom Millwork & CasegoodsThis subcontract opportunity involves the fabrication and installation of custom built-in desktops for prime contractors working on USACE Armed Forces Career Center projects in San Antonio, Texas. The scope of work requires the production of desktops with a minimum depth of 24 inches, set at 30 inches above finished floor, featuring rear grommets and under-desktop support braces. All units must be finished using Formica #927 Folkstone, 58 Matte plastic laminate. Managed under the Department of Defense through the W072 Endist Louisville agency, this project falls under NAICS code 321911 for custom millwork and casegoods. Interested parties must submit their responses by the deadline of October 30, 2026.

W072 Endist Louisville

POSTED

DEADLINE

Railroad Timber Tie SupplyThis subcontract for Railroad Timber Tie Supply involves the provision of treated timber ties for prime contractors working on MBTA facility projects. The supplier is responsible for delivering bulk ties that strictly adhere to the Amber Standard and Specification 02855AP, specifically for application in number 8 Left-Hand turnouts. All materials must be delivered directly to the designated fabrication facility. The procurement is managed by the Massachusetts Procurement and Logistics agency under NAICS code 321911. The solicitation was posted on October 6, 2026, with a response deadline set for October 26, 2026.

400000 - Procurement & Logistics

POSTED

DEADLINE

Supply and Delivery Metal Clad Wood Windows to the Government of Yukon

Solicitation # RFB-2026-9-5584

The Government of Yukon is soliciting bids for the supply and delivery of eight new and unused metal clad wood windows for the Historic Sites Unit in Whitehorse. The requirement consists of four W-1 units and four W-2 units, with the latter specifically measuring 914mm in width by 1690mm in height as single hung sashes. All windows must be double glazed with Argon and Single Low-E, featuring exterior metal cladding painted Cool Grey (Pantone Cool Gray 9 C) and unpainted interior wooden elements. A physical paint sample is required for approval prior to application. The successful supplier is responsible for all shipping and environmental handling costs, with delivery and offloading required at the Yukon Beringia Centre by January 29, 2027. The contract award will be determined by a total award price-driven process, granting the contract to the lowest total price bid that meets all mandatory requirements. Evaluation includes Bid Value Reduction (BVR) incentives for registered Yukon First Nation businesses, offering reductions based on business ownership, location, and labor. Payments will be made in Canadian funds within 30 calendar days of receiving an undisputed invoice and are exempt from GST/HST. Suppliers must comply with the General Contract Terms and Conditions, including adherence to the Access to Information and Protection of Privacy Act and the Yukon Vendor Performance Review Program.

POSTED

DEADLINE

Wood Preservative Treatment ApplicationThis subcontract for Wood Preservative Treatment Application involves providing specialized treatment services for a headstock replica project located in Midlothian, Virginia, for Chesterfield County. The scope of work requires the application of UC5C pressure preservative treatment using CCA to kiln-dried timbers following the completion of cutting and joinery. Additionally, the contractor is responsible for applying site-applied preservative treatments to all field-drilled holes and site-sawn ends in strict accordance with AWPA U1 standards. The selected contractor will be responsible for the delivery of all pressure-treated and site-preserved timber members to the project site. This opportunity is categorized under NAICS code 321911, with a response deadline set for October 22, 2026.

POSTED

DEADLINE

THRB - 16579 - Restore/Replace Damaged Windows/Shutters at THRBThe Department of the Interior is forecasting a project to rehabilitate the primary exterior windows on the front of the THRB building. This scope of work involves the restoration and replacement of damaged wood windows, including the sashes, frames, hardware, and shutters. The project is categorized under NAICS code 321911 and was posted on September 2, 2026. Amy L. Sebring serves as the primary point of contact for this effort, with additional support provided by the Contract Support Center.

POSTED

DEADLINE

Construction Plywood SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply of construction-grade plywood in AA, AB, and BB grades. The materials must be delivered in waterproof-wrapped and labeled units that do not exceed 36 inches in height, ensuring full compliance with military packaging and labeling standards. The contract is categorized under NAICS code 321911 and was posted on August 17, 2026. All deliverables must adhere to the specific technical requirements and military specifications outlined for the procurement of construction materials.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Custom Plywood BoxesThis subcontract with the Defense Logistics Agency involves the manufacture and delivery of 40 custom plywood boxes measuring 144.5 by 48.5 by 3.5 inches. The production must adhere to ASTM D3951 and modified ASTM B-660 standards to ensure compliance with specific technical requirements. The items are to be delivered F.O.B. Destination to Tinker AFB. This procurement falls under NAICS code 321911 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Softwood Lumber SupplyThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the supply of heat-treated and graded softwood lumber in various dimensions. The contractor is responsible for ensuring all materials are packaged and labeled according to strict military specifications to maintain quality and compliance during transport. The scope of the agreement includes the delivery of these materials to both CONUS and various overseas locations. Classified under NAICS code 321911, the contract ensures a steady supply of lumber products to support Department of Defense operations globally.

Defense Logistics Agency

POSTED

DEADLINE

Pallet Supply and Certification ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense requires the supply of winged pallets. All provided units must be heat-treated, certified, and stamped in strict accordance with MD00100452 Rev C and applicable DOD standards. The agreement falls under NAICS code 321911 and was posted on August 10, 2026. The contract ensures that all materials meet specific military specifications for durability and certification to support defense logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

Structural Plywood Supply – EN 636-3S (European Standard)The contract involves the supply of structural plywood compliant with EN 636-3S, a European standard ensuring high durability and moisture resistance, specifically for overseas defense construction projects. The material must meet stringent performance criteria to withstand harsh environmental conditions encountered in military infrastructure applications. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 321911 indicating classification within wood product manufacturing. The work is intended for international deployment, though the exact location of performance is not specified. The solicitation was posted on August 5, 2026, and can be referenced through the DIBBS system using the provided contract and delivery identifiers.

Defense Logistics Agency

POSTED

DEADLINE

Structural Plywood Supply – CSA O121 / O151-M1978 (Canadian Standard)The contract mandates the supply of structural plywood compliant with the Canadian standard CSA O121/O151-M1978 for use in defense construction projects, requiring strict adherence to military labeling protocols and full traceability of all materials from manufacture to delivery. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, ensures that each sheet of plywood meets rigorous performance and dimensional specifications defined by the Canadian standard while being marked and documented to satisfy defense-grade accountability requirements. The work is intended for use in critical military infrastructure applications where durability, consistency, and certified origin are non-negotiable. The solicitation is categorized under NAICS code 321911, indicating classification within wood product manufacturing, and is tied to a specific contract award identified by the numbers SPE8E621D0029 and SPE8E626F1267. Although the place of performance and point of contact details are not provided, the contract is active as of August 5, 2026, and requires contractors to maintain complete documentation of material sources, production batches, and inspection records to ensure compliance with military traceability standards. All deliveries must be accompanied by certification verifying compliance with CSA O121/O151-M1978 and must be labeled in accordance with DoD specifications to enable verification throughout the supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Structural Plywood Supply – PS-1 Compliant (U.S. Standard)The contract pertains to the supply of structural plywood compliant with U.S. PS-1 standards for use in military infrastructure projects at Camp Humphreys in Korea. The material must meet all defense-specific labeling and documentation requirements, ensuring traceability, quality, and adherence to federal military specifications. This is a subcontract under the Department of Defense, administered by the Defense Logistics Agency, with the North American Industry Classification System code 321911 indicating it falls under other wood product manufacturing. The work is focused on supporting critical construction and facility upgrades at the overseas military installation, requiring strict compliance with defense protocols for materials used in federally funded infrastructure. All deliverables are subject to full defense documentation standards, including proper identification, certification, and shipping records that align with military logistics and supply chain security protocols. The contract was posted on August 5, 2026, and is linked to the DIBBS system under the primary contract reference SPE8E621D0029 with delivery order SPE8E626F1267. While specific performance locations and point of contact details are not provided, the emphasis remains on delivering high-grade, PS-1 compliant plywood that meets the durability and safety demands of military use in a strategic foreign deployment setting.

Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A

General Info

Agency

Department Of Defense → FA4600 55 Cons Pkp

NAICS

321911 - Wood Window and Door Manufacturing

Place of Performance

101 Washington Sq. Bldg 40, OFFUTT AFB, NE, 68113, USA

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedJun 10

Combined Synopsis

Notice updatedJun 10

Response deadline time changed from 7:00 PM UTC to 8:00 PM UTC on Jun 20, 2008. Set-aside changed from Total Small Business Set-Aside (FAR 19.5) to Service-Disabled Veteran-Owned Small Business Set Aside. The notice description changed.

Response DeadlineJun 20

Deadline has passed

Submission Closed

06/20/2008, 07:00:00 PM UTC