Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Renovate Male Sauna in Bldg. 170, USAG Bavaria, Grafenwoehr Military Community - Tower Barracks

Active
W912PB26QA103Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army is soliciting bids to renovate the male sauna facility located in Building 170 at Tower Barracks within the USAG Bavaria military community in Grafenwoehr, Germany. The solicitation, numbered W912PB26QA103, was posted on July 16, 2026, with responses due by July 31, 2026. The project falls under NAICS code 238990 for other specialty trade contractors and is managed by the Department of Defense through the Office of Contracting. Work will be performed on-site at the Grafenwoehr installation, and offers must be submitted directly to the contracting office based in APO, AE. The primary point of contact for inquiries is Matthew Boals, with Jereme Kemp as the secondary contact, both reachable via official military email addresses. The solicitation does not specify a set-aside for small businesses or other categories and is open to qualified contractors capable of executing renovations in a military facility under U.S. government standards.

General Info

U.S. Army seeks bids to renovate male sauna at Grafenwoehr, Germany, with proposals due July 31, 2026.

Agency

Department Of Defense → 0409 Aq Hq ContractView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

AE

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → 0409 Aq Hq Contract
Contacts2 people available
OfficeAPO, AE, 09114, USA
Organization / Agency
Department Of Defense → 0409 Aq Hq Contract
View Agency Profile
Office AddressAPO, AE, 09114, USA
Contacts

Full Description

Show more
Renovate Male Sauna in Bldg. 170, USAG Bavaria, Grafenwoehr Military Community - Tower Barracks

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → 0409 Aq Hq Contract

Same awarding agency

NAICS: 333120
New
Federal
Wheel LoaderThe solicitation requires the delivery of a new, up-to-date heavy-duty wheel loader, either a CAT 972 XE or an equivalent model, designed for continuous quarry operations such as loading articulated dump trucks and crushers. The machine must have an operating weight exceeding 24,000 kg and a loading height over 3.30 meters, powered by a 6-cylinder, water-cooled diesel engine with output exceeding 250 kW (340 hp), compliant with the latest EU emission standards and equipped with a Diesel Particulate Filter. The loader must include an HD 4.0 m³ shovel with eight teeth for rock quarrying, fixed mounting, and an OEM-integrated payload and weighing system with an in-cab digital display. The cabin must be soundproofed, pressurized, and feature ROPS and FOPS certification meeting ISO 3471-2008 and ISO 3449-2005 Level II standards, with air conditioning, heated and ventilated leather/cloth seat, ergonomic access with ladder and handrails, joystick steering, emergency electric steering, two-point seat belts, heated exterior mirrors, windshield wipers and washers front and rear, a cleaning platform, sun visors, and a DAB+ radio. The electrical system must be 24 volt, equipped with LED driving, work, and service lights, a rotating beacon, and a jump start device with connection cable. The machine must support road travel with a speed over 30 km/h, include a continuously variable transmission, recovery device, lockable fuel caps, central lubrication system, reversing warning system, collision avoidance system, rear camera monitor, and tire specifications of 26.5 R 25 VJTxL3 with VSDL x L5 wheel chocks. It must be fully compliant with German StVO regulations, bear a CE mark, and include all standard manufacturer equipment and integral components required for a complete unit of work. The machine must be delivered fully assembled and operational at the factory, accompanied by three printed or CD-based copies each of operating instructions, workshop manuals, and spare parts catalogs in both German and English, and must include a 36-month or 2,500 operating hour warranty covering all parts and labor as per the manufacturer’s specifications. Manufacturer-qualified personnel must provide a six-hour instructional demonstration in German to operating personnel within four days of delivery at the designated installation site in Grafenwoehr,
Construction Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333112
New
Federal
Large Scale MowerThe U.S. Army Regional Contracting Office Bavaria is seeking a single Large Scale Mower fully equipped with attachments for delivery to USAG Ansbach, Directorate of Public Works at Storck Barracks, Illesheim, under solicitation number W912PB26QA073. The requirement, classified under NAICS code 333112, calls for a fully assembled and ready-to-operate machine featuring a 4-cylinder diesel engine with a minimum output of 55kW (74 hp) at 2800 rpm compliant with 97/68/EC Stage V emissions standards, permanent hydrostatic all-wheel drive, and a minimum 50-liter diesel fuel tank. The machine must be painted Green RAL6018 and mounted on 16-inch wide tires with M+S and snowflake ratings. It must include a 1500 mm cutting width mower with three blades, adjustable cutting height from 30 to 80 mm, and a ground clearance of 140–190 mm. The cab must have air conditioning, ventilation, defrosting, an air-suspended seat with an integrated joystick control featuring a 4.3-inch screen and downforce control for front attachments. Additional attachments include a suction sweeper with a rotation filter system, a minimum 190-liter freshwater tank, sweeping width of 1430 to 2300 mm, and an 110 Bar high-pressure cleaner; a V-plough for winter service with a 1500 mm width and liquid waxed sealed Vulkollan rubber scraper; and a salt and gravel spreader with a minimum 600-liter capacity, working width of 1.5 to 4.0 meters, and RAL 7021 coloring with a two-layer interior coating. All manuals—operating and parts—in both German and English must be provided. Post-delivery instruction and demonstration for maintenance and operations personnel must be conducted in German by technically qualified personnel and scheduled in coordination with the user. The equipment must carry a 12-month manufacturer’s warranty. Delivery will occur under FOB Destination terms. The procurement will follow a Low Price Technically Acceptable evaluation methodology, where only proposals meeting all technical requirements are considered, and the lowest-priced acceptable offer will be selected. Although this is currently a pre-solicitation notice, the official solicitation will be posted on SAM.gov
Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 336212
New
Federal
Pre-Solicitation Notice / CULT Commercial TrailersThe U.S. Department of Defense, through the 0409 Aq Hq Contract office, is conducting market research via a Pre-Solicitation Notice for the procurement of fourteen European-specification commercial trailers to support the 6966th Transportation Truck Terminal in Kaiserslautern, Rhineland-Palatinate. The trailers include four flatbeds, four rollerized box trailers, four curtainsider trailers, one Type 2 lowbed trailer, and one Type 3 lowbed recovery trailer, all of which must be newly manufactured with factory-standard ADR EX II/EX III certification for hazardous materials and munitions transport. Each trailer must comply with EU-Type approval standards, include a Certificate of Conformity, meet German TÜV MOT requirements, and have telematics systems configured to block unauthorized data transmission. All trailers must be equipped with proper ADR sign holders on the left, right, and rear sides. The Government intends to award a Firm-Fixed-Price contract following this market research phase and anticipates a six-month delivery lead time from contract award. Responses must be submitted via email to Maryanne E. Peck and Brandon Donalson by August 26, 2026, and must include company name, address, CAGE code, UEI, NAICS code classification for size determination, and point of contact details. This notice is strictly for industry feedback and planning and does not constitute a solicitation, offer, or commitment to award a contract; no reimbursement is provided for response-related costs. Offers for U.S.-made or designated country end products will be evaluated without regard to Buy American restrictions under WTO GPA provisions. No proprietary, classified, or sensitive information should be included in submissions, and the Government reserves the right to use non-proprietary technical information in future solicitations.
Truck Trailer Manufacturing

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238990
New
Federal
Removal/ Remediation of asbestos containing Doors in various Bldgs, USAG Bavaria, Grafenwoehr Military Community - Tower BarracksThe contract pertains to the removal and remediation of asbestos-containing doors across multiple buildings within the Tower Barracks area of the USAG Bavaria military community in Grafenwoehr, Germany. The work is governed by the solicitation number W912PB26QA102, which was posted on July 15, 2026, with proposals due by July 30, 2026. The North American Industry Classification System code is 238990, indicating it falls under other special trade contractors, specifically for environmental remediation services. The contracting activity is administered by the Department of Defense, through the 0409 Aq Hq Contract Office, located in APO, AE with a zip code of 09114. Performance of the work is required on-site at Tower Barracks in Bavaria, requiring the contractor to comply with all federal, military, and environmental safety standards for asbestos abatement. Matthew Boals serves as the primary point of contact for this solicitation and can be reached via email at matthew.s.boals.civ@army.mil. The contract requires strict adherence to hazardous material handling protocols, including containment, decontamination, personnel protection, and proper disposal procedures in accordance with applicable regulations. All work must be performed with minimal disruption to military operations, and timelines will likely be synchronized with facility usage schedules. Contractors must possess the necessary certifications, equipment, and experience to safely manage asbestos removal in a military installation environment. Failure to meet performance, safety, or regulatory requirements may result in contract termination or financial penalties. All interested parties must submit proposals through the official SAM.gov portal by the stated deadline.
All Other Specialty Trade Contractors

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 314999
Federal
Firefighter Turnout GearThe solicitation W912PB26QA087 seeks the procurement of Firefighter Turnout Gear Coats and Pants under a Firm-Fixed-Price arrangement as a commercial acquisition governed by FAR Part 12, with a total quantity requirement reduced from 182 to 132 units for each garment following Amendment 0001, extending the offer deadline to 23 July 2026 at 1000 UTC. The items must meet or exceed all specifications outlined in Attachment 1, including structural features such as a two-layer Nomex rescue strap, padded grip pieces, lamp holders, name strip fleece panels, and microphone holding straps, available in sizes 40-42 through 68-70 with five length options (A to E) and customizable sizing. Unique Item Identification (UID) is mandatory per MIL-STD-130, requiring machine-readable marks verified by approved technology, with manufacturer logos visible externally and internal labels compliant with current regulations; packaging must adhere to MIL-STD-129, and shipments must be labeled and tracked via Wide Area WorkFlow (WAWF) using DoDAAC W912PB. Evaluation is based on a Lowest Price Technically Acceptable (LPTA) basis, with mandatory pass/fail gates requiring certification of U.S., Qualifying, or Designated Country origin under DFARS 252.225-7021 and a Green, Purple, Blue, or neutral SPRS quality rating for CAGE and PSC; failure in either disqualifies the offer. Offerors must be registered in SAM, submit IRS Form W-14 to avoid a 2% tax withholding, and comply with DFARS 252.204-7016 and 252.204-7017 cybersecurity provisions. The gear must be delivered FOB Destination in Germany to two locations — JBSA Fort Sam Houston, TX and USAG Bavaria, Grafenwoehr — within 90 calendar days of award, with the contractor bearing all transportation costs. Proposals must be submitted via email in PDF format under 10 MB, with the subject line “Submission of Quote W912PB26QA087,” and include a completed SF 1449 with required blocks, technical documentation, and subcontracting disclosures. The acquisition is a Small Business set-aside, with all correspondence
All Other Miscellaneous Textile Product Mills

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 711130
Federal
Roman Catholic Music Service Support, USAG Bavaria (Rose Barracks), GermanyThe U.S. Army is seeking qualified vendors to provide Roman Catholic Music Service Support at the Rose Barracks Community Chapel and other designated locations on USAG Bavaria in Germany under a firm-fixed-price, non-personal services contract. The contractor will be responsible for delivering musical and choral performances for 52 weekly worship services, 16 seasonal and ceremonial services, and 68 weekly rehearsals annually, covering a five-year period beginning September 15, 2026, with four optional one-year extensions through September 14, 2031. This acquisition falls under NAICS code 711130 for Musical Groups and Artists and is classified as a social-chaplain service, adhering to FAR Part 12 for commercial services procurement. Performance is restricted to a secure military installation, requiring contractors to comply with all base access protocols, security training including AT Level I, iWATCH, and OPSEC, and to adhere to local force protection regulations. Payment will be made monthly via the Wide Area Work Flow system upon submission and verification of completed service forms. Interested parties must submit capability statements electronically to Contracting Specialist Jean Carlos Silva no later than July 28, 2026, including company name, point of contact details, and summary of relevant experience. Any inquiries or requests for clarification must be submitted in writing by July 21, 2026. The government will not reimburse any costs incurred in preparing or submitting responses to this pre-solicitation notice, and no set-aside provisions apply. Responses are to be directed solely to the provided email address, and failure to meet deadlines may result in disqualification. The contract will be awarded based on demonstrated capability to meet the required service volume, scheduling reliability, and adherence to military security standards.
Musical Groups and Artists

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 711130
Federal
Protestant Music Service Support (USAG Rose Barracks Community Chapel)The U.S. Army Contracting Support Brigade is seeking qualified vendors to provide Protestant Music Service Support at the Rose Barracks Community Chapel in Bavaria, Germany, under a firm-fixed-price, non-personal services contract expected to last five years, beginning September 15, 2026, with four optional one-year extensions through September 14, 2031. The contractor will be responsible for planning, coordinating, and performing musical and choral services for 52 weekly worship services, 16 special seasonal and ceremonial events, and 68 weekly rehearsals annually, all in support of the Religious Support Office. Performance will occur exclusively on a secure U.S. military installation, requiring full compliance with force protection, physical security, and base access protocols, including mandatory training such as AT Level I, iWATCH, and OPSEC. Payment will be made monthly via the Wide Area Work Flow system based on verified service units documented through the official RSO Service Rendered Form. This acquisition follows FAR Part 12 procedures for commercial services, and no set-aside is currently designated. Interested parties must submit capability statements detailing company information and relevant experience electronically to Contracting Specialist Jean Carlos Silva by 7:00 a.m. on July 28, 2026. All inquiries or requests for clarification must be submitted in writing by July 21, 2026, to ensure a timely response. The government will not reimburse any costs incurred in preparing or submitting responses to this pre-solicitation notice. The contract will be awarded based on the technical and operational suitability of proposed providers to deliver high-quality musical support in alignment with the religious and ceremonial needs of the military community on post.
Musical Groups and Artists

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 238990
Federal
Repair Transformer Station 9, Range 301, USAG Bavaria, Grafenwoehr Training AreaThe contract is for the repair and reconstruction of Transformer Station 9 in Range 301 at the Grafenwöhr Military Training Area in Germany, under the U.S. Army Garrison Bavaria. The work involves the complete dismantling of the existing transformer station including a 100 kVA oil transformer, three medium-voltage switchgear cells, a low-voltage switchgear, antenna system, all associated cables, ceiling lights, switches, and metal structures, followed by the demolition of the current building measuring 3.15 m x 3.2 m x 2.75 m. A new transformer building, approximately 4.2 m x 3.3 m with a clear height of 2.60 m and a 7-degree roof pitch, will be constructed along with a reinforced concrete cable cellar 0.8 m high. The new station will feature a 24 kV medium-voltage switchgear with a transformer switch panel, two fused cable outlets, a reserve panel, a high-voltage transformer panel, and a dedicated earth terminal, alongside a 20 kV oil transformer with full DGPT2 protection. The low-voltage system will include a 160 A circuit breaker, a 400 A busbar, five 63 A fuse switch disconnectors, and an energy multimeter with LED display. All existing medium- and low-voltage cables will be transferred to the new location, and a walkable gravel surface will be installed around the new station. The contract is a Firm Fixed Price award with a value of $500,000 or less, and the performance period spans 400 calendar days, including a 30-day commencement period. The solicitation was posted on 12 July 2026 with a response deadline of 27 July 2026, and bidders must be responsible sources eligible to submit bids through the RCO Bavaria. All work must be performed in Germany, and contractors are required to hold valid authorization to conduct business under German law. The project is identified under solicitation number W912PB26BA1C5I and NAICS code 238990, with primary point of contact Jereme Kemp and secondary contact Dante Kubischta from the Department of Defense. No paper copies will be distributed, and all submissions must be electronic.
All Other Specialty Trade Contractors

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 336110
Federal
Project MD-HA-2025-00086111 (Moldova Procurement of Rescue Vehicles)The solicitation for Project MD-HA-2025-00086111, the Moldova Procurement of Rescue Vehicles, requires all questions and submissions to be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, with inquiries due no later than July 31, 2026. The final quotation submission deadline is August 21, 2026, and offers must be prepared in strict accordance with the tailored FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION). Technical submissions must include literature proving compliance with specified requirements, the bidder’s CAGE code for past performance verification, and a detailed proposed delivery schedule. All quotations must be priced in Euros using the designated exchange rate of 0.9303 as established by the Presidential exchange rate, in alignment with FAR 52.212-2 evaluation procedures. The contract is managed by the U.S. Department of Defense through the Office of Contracting, with the Contract Specialist Jereme Kemp and Contracting Officer Matt Boals serving as the primary points of contact. The solicitation number is W912PB26QA098, classified under NAICS code 336110, and is issued from the APO AE 09114 address with performance expected to support Moldova’s rescue vehicle requirements.
Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

11 days ago

DEADLINE

in about 1 month
View Details