Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Repair and Restoration of Hydraulic Accumulators

Active

Federal

Response Deadline11/06/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the evaluation, labor, and restoration of hydraulic accumulators for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work requires the contractor to evaluate assets, restore units to full operating condition, and conduct rigorous inspection and testing in strict accordance with OEM specifications and drawings. The project specifically mandates the delivery of five restored and tested hydraulic accumulators under NSN 7R 1650 011589683. To ensure compliance with Department of Defense standards, all work must adhere to MIL-STD-973 for configuration control and MIL-STD-129-P for FMS barcoding. The performance of this contract will take place in Philadelphia under NAICS code 811210. Interested parties must respond by the deadline of November 6, 2026.

General Info

Restore and test five hydraulic accumulators for NAVSUP projects by November 6, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Philadelphia, PA, USA

Set-Aside

NONE

Documents

This scope was carved out of N0038327QF186.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FMS Repair, QTY 5, NIIN 011589683

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 6

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs evaluation, labor, and restoration of hydraulic accumulators for prime contractors on NAVSUP Weapon Systems Support projects. Evaluates assets, restores units to operating condition, and performs inspection and testing per OEM specifications and drawings. Adheres to MIL-STD-973 for configuration control and MIL-STD-129-P for FMS barcoding. Delivers five restored and tested Hydraulic Accumulators (NSN: 7R 1650 011589683).

Similar Contracts

Same NAICS industry code

HealthBOT 2000 Maintenance and Support ServicesThe HealthBOT 2000 Maintenance and Support Services subcontract involves providing twelve consecutive months of specialized service and maintenance for prime contractors working on City of Houston Houston Airport System projects. The scope of work includes performing routine maintenance, troubleshooting technical issues, and managing warranty claims for defective parts to maintain continuous operational availability. To ensure high quality of service, the contract requires the use of manufacturer-certified technicians. The primary objective is to deliver a full year of documented maintenance and guaranteed operational uptime. Interested parties should note the response deadline of October 12, 2026.

City of Houston

POSTED

about 13 hours ago

DEADLINE

Kiosk Technical Installation and Commissioning ServicesThis subcontract for Kiosk Technical Installation and Commissioning Services involves the professional setup and deployment of HealthBOT 2000 Kiosks for prime contractors working on City of Houston Houston Airport System projects. The scope of work includes unpacking the units, physical placement, and the configuration of all necessary electrical and network connectivity. The service provider is responsible for performing comprehensive software configuration and system testing to ensure each unit is fully operational. The final deliverable is a commissioned and fully functional HealthBOT 2000 Kiosk. This opportunity was posted on October 6, 2026, with a response deadline of October 12, 2026, under NAICS code 811210.

City of Houston

POSTED

about 13 hours ago

DEADLINE

Sports Score Clock Maintenance and Testing ServicesThe Sports Score Clock Maintenance and Testing Services subcontract involves providing specialized technical support for electronic score clock systems on municipal projects for the City of St. John's. The selected provider will work under prime contractors to perform initial and annual inspections of both hardware and software, ensuring timing accuracy and display integrity. Responsibilities include routine electronic maintenance utilizing specialized diagnostic software and the delivery of comprehensive inspection reports to ensure all systems are fully operational. Compliance with Occupational Health and Safety standards and the implementation of a Site Specific Safety Plan are mandatory requirements for this engagement. Interested parties must submit their responses by October 23, 2026, at 5:30 PM. This opportunity falls under NAICS code 811210 and is focused on maintaining critical sports infrastructure within the city's municipal portfolio.

City of St. John's

POSTED

about 15 hours ago

DEADLINE

Sports Field Lighting and Clock Maintenance

Solicitation # 2026145

The City of St. John's is seeking a standing offer agreement for the provision of all labor, materials, testing, equipment, and services required for the maintenance of sports field lighting and score clock systems on municipal properties. The contract follows a low-bid procurement process where the award is granted to the top-ranked compliant respondent based on price evaluation, with ties resolved by a coin toss. The term of the agreement is for three years, with an option for the City to extend the contract for up to an additional two years. The scope of work focuses on inspection and testing, with an initial inspection upon award followed by annual inspections. The contractor must provide PDF reports immediately following testing and maintain emergency response availability 365 days a year, with a required on-site arrival time within two hours of a call. All electrical work must comply with the St. John's Electrical By-Law and manufacturer instructions, utilizing personnel experienced in calibrating sports field lighting and clocks. Successful respondents must meet mandatory technical and submission requirements and provide a Workplace NL Certification, a Certificate of Good Standing from the Newfoundland and Labrador Registry of Companies, and an Occupational Health and Safety Declaration. Insurance requirements include commercial general liability and automobile liability of at least 2 million dollars per occurrence, with the City named as an additional insured. The contractor is also required to indemnify the City against all liabilities and losses arising from the performance of the contract.

City of St. John's

POSTED

about 15 hours ago

DEADLINE

Regulating Valve Repair and Overhaul ServicesThis subcontract for Regulating Valve Repair and Overhaul Services involves the teardown, evaluation, and repair of Regulating Valve NSN 4820-01-366-2013 to support prime contractors on Department of the Navy projects. The scope of work includes disassembling the valve to assess wear, executing repairs according to CAGE Code 04962 Reference No. SM4-40 (40)151-1500/10-S5, and conducting functional pressure testing to ensure operational integrity. The project requires precision machining and strict adherence to MIL-STD-130 marking standards. The final deliverable is a fully repaired, tested, and marked valve. This opportunity is managed under NAICS code 811210 for the Navsup Weapon Systems Support Mech within the Department of Defense, with a response deadline of October 14, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

Digital Converter Repair and ModificationThis subcontract, titled Digital Converter Repair and Modification, involves providing specialized technical services for the Department of Defense under the Navsup Weapon Systems Support Mech agency. The scope of work focuses on the teardown, evaluation, repair, and modification of Digital Converters, specifically NSN 7HH 7050-01-612-6039, for prime contractors on NAVSUP projects. The contractor is responsible for disassembling units to diagnose faults, replacing electronic components using precision soldering and diagnostic equipment, and ensuring all units are restored to full operational status. The project requires strict adherence to MIL-STD-130 and MIL-STD-129 standards. Classified under NAICS code 811210, the opportunity was posted on October 6, 2026, with a response deadline of November 5, 2026. The primary objective is the delivery of fully repaired and modified units that meet all specified reference numbers and military requirements.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

Precision Calibration and Preventive Maintenance for Leica Laser TrackersThis subcontract involves providing specialized calibration and preventive maintenance for Leica Laser Trackers to support prime contractors on Air Force projects at Tinker AFB. The scope of work specifically requires the execution of Serv C26-132 Leica RPMP calibrations and inspections in accordance with the Performance Work Statement. To ensure accuracy and compliance, the contractor must utilize specialized calibration standards to certify the equipment and provide final certified calibration reports. Eligible providers must hold the necessary certification or authorization to service Leica Geosystems equipment. This effort falls under NAICS code 811210 and is managed by the Department of Defense agency FA8125 Afsc Pzima. The project is centered in the 73145 zip code area, with a response deadline set for October 20, 2026.

FA8125 Afsc Pzima

POSTED

about 16 hours ago

DEADLINE

EDS/EBSD System Support ServicesThe EDS/EBSD System Support Services subcontract, managed through the NASA Shared Services Center, provides essential technical support and maintenance for upgraded systems at the NASA Langley Research Center in Hampton. Over a 51-month performance period, the contractor is responsible for ensuring continuous system uptime through technical troubleshooting, regular software updates, and comprehensive hardware maintenance. To fulfill the requirements of this agreement, the contractor must deploy certified Oxford Instruments technicians who are granted authorized site access to the facility. This long-term engagement is categorized under NAICS code 811210 and is designed to maintain critical operational capabilities for prime contractors working on NASA LARC projects.

NASA Shared Services Center

POSTED

about 16 hours ago

DEADLINE

EDS/EBSD System Installation ServicesThis subcontract, managed by the NASA Shared Services Center, involves the physical installation and integration of Oxford EDS and EBSD upgrade components at the NASA Langley Research Center in Hampton, Virginia. The scope of work specifically requires the installation of the Ultim Max Infinity Large Area Analytical Silicon Drift EDS Detector and the X4 Digital pulse processor, followed by comprehensive system integration and calibration to ensure the system is fully operational. Due to the nature of the work site, personnel must obtain NASA site access badges to perform the services. The project is categorized under NAICS code 811210 and is intended for prime contractors supporting NASA LARC projects, with the final deliverable being a fully calibrated and functional EDS/EBSD system.

NASA Shared Services Center

POSTED

about 16 hours ago

DEADLINE

DTE Installation and On-the-Job Training (OJT) ServicesThis subcontract for DTE Installation and On-the-Job Training Services supports DLA Aviation projects through the physical installation and validation of specialized equipment. The scope of work includes unpacking, positioning, connecting, and verifying the operation of various stations, including PAT243, PAT24X, CLET TS, CDU, RTACS, and PAO Processors. The primary objective is to deliver fully operational systems and ensure that prime contractor personnel are properly trained through hands-on instruction. Managed under the Department of Defense, the project requires personnel to hold necessary security clearances to gain access to diagnostic facilities located in Ukraine. The contract is categorized under NAICS code 811210 and is associated with the DLA Aviation office in Huntsville.

Al DLA Aviation At Huntsville

POSTED

about 16 hours ago

DEADLINE

Mechanical Repair and Overhaul of Clutch Assembly (NIIN: 014134654)This subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the mechanical repair and overhaul of FRI Clutch Assemblies with NIIN 014134654. The scope of work requires the contractor to perform complete teardown, evaluation, and modification of the assemblies to determine wear and execute overhauls according to established contractor standard practices. The project mandates strict adherence to CAGE Code 03956 and Reference Number 1979219, with all items marked per MIL-STD-130, REV N and packaged using SMIC suffixes. The final deliverable is a fully repaired and certified Clutch Assembly. Interested parties must respond by December 15, 2026, under NAICS code 811210.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

Cylinder Assembly Repair and Modification ServicesThis subcontract through Navsup Weapon Systems Support involves the technical evaluation, teardown, and physical repair or modification of Cylinder Assembly NSN 7RH 1650-01-574-3797 F for US Navy projects. The scope of work requires a complete disassembly to individual components, detailed wear analysis, and the execution of repairs to operational specifications utilizing hydraulic testing equipment and precision machining. The contractor is responsible for delivering a certified and repaired Cylinder Assembly while adhering to a strict 35-day turnaround time and meeting all UID marking requirements. This effort falls under NAICS code 811210 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

Component Testing and Quality Assurance InspectionThe Component Testing and Quality Assurance Inspection subcontract, issued by the Navsup Weapon Systems Support under the Department of Defense, involves performing final testing and inspection of repaired assemblies for prime contractors on Department of the Navy projects. The selected provider will execute functional tests to ensure operational reliability and verify the accuracy of IUID for both the assembly and its embedded components using specialized test tooling equipment as defined in the statement of work. Key deliverables for this engagement include the provision of Ready For Issue certification, detailed test reports, and inspection certificates. Interested parties should note that the response deadline for this opportunity is November 5, 2026, and the work falls under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Pedestal Assembly Replacement Parts SupplyThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the supply of materials, parts, and components to prime contractors for Department of the Navy projects. The primary objective is to replace worn elements of the Pedestal Assembly using OEM or approved equivalent parts for part number 123SCAB101-301. The contractor is required to provide certification of authenticity and ensure all deliverables comply with the Trade Agreements Act. Additionally, IUID marking must be performed for any parts with a unit acquisition cost of 5,000 dollars or more. The contract was posted on October 6, 2026, with a response deadline of November 5, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Pedestal Assembly Overhaul and Repair ServicesThis subcontract for Pedestal Assembly Overhaul and Repair Services involves the teardown, evaluation, and mechanical repair of Pedestal Assembly A for prime contractors supporting Department of the Navy projects. The scope of work requires the contractor to assess components for wear and modify mechanical parts to original specifications using precision measuring instruments and specialized facilities. All work must adhere to DoD RFI standards and IUID marking requirements to ensure the delivery of a fully restored, tested, and inspected assembly under NSN 1680-01-561-2491. Managed by Navsup Weapon Systems Support under the Department of Defense, this opportunity falls under NAICS code 333311. The solicitation was posted on October 6, 2026, with a response deadline of November 5, 2026.

Automatic Vending Machine Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Replacement Parts for Hydraulic AccumulatorsThis subcontract involves the supply of replacement materials and parts for Hydraulic Accumulators, specifically part number 70103-28041-042, to support prime contractors on NAVSUP Weapon Systems Support projects. The scope of work includes the sourcing or fabrication of replacement seals, valves, and housings that strictly adhere to original manufacturer specifications and drawings. All delivered components must be certified and meet specific FMS shipping and barcoding requirements. Managed under the Department of Defense, the project is categorized under NAICS code 326291 and will be performed in Philadelphia. The solicitation was posted on October 6, 2026, with a response deadline set for November 6, 2026.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Pressure and Functional Testing ServicesThis subcontract for Pressure and Functional Testing Services, issued by the Navsup Weapon Systems Support under the Department of Defense, involves the final functional testing and certification of repaired cylinders for prime contractors on US Navy projects. The scope of work includes performing hydrostatic or pneumatic pressure testing, leak detection, and tolerance verification. These tasks must be executed using calibrated gauges and high-pressure test benches, with mandatory calibration certifications required for all equipment used. The successful contractor is responsible for delivering a validated asset accompanied by a certified test report. This opportunity falls under NAICS code 541380 and was posted on October 6, 2026, with a response deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Cylinder Assembly Replacement Components/Seal KitsThis subcontract through Navsup Weapon Systems Support involves the provision of replacement parts, seals, gaskets, and sub-components for Cylinder Assembly NSN 7RH 1650-01-574-3797 F. The components are intended for prime contractors working on US Navy repair contracts and must be sourced from the original equipment manufacturer or an approved equivalent. All high-pressure seals and specialized alloys must strictly adhere to the specifications outlined in the relevant technical manuals. The contractor is responsible for delivering certified replacement parts and kits while ensuring full compliance with the Trade Agreements Act and providing domestic end product certification. This opportunity is categorized under NAICS code 488190, with a response deadline set for November 5, 2026.

Other Support Activities for Air Transportation

POSTED

about 16 hours ago

DEADLINE

Electronic Component Repair and Restoration (Central Electronics)This subcontract with Navsup Weapon Systems Support involves the inspection, component-level repair, and testing of Central Electronics units, specifically NIIN 016716624, for prime contractors on Department of the Navy projects. The selected provider is responsible for identifying failures, replacing faulty circuitry, and executing all necessary testing procedures to ensure units are returned to Ready For Issue condition. The contractor must provide all required special test equipment, fixtures, and jigs to complete the work. Compliance with FAR 52.246-11 Quality Management System and Buy American standards is mandatory for this effort. The primary objective is the delivery of serviceable RFI units under NAICS code 811212. Responses for this opportunity are due by November 5, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Supply of Aircraft-Grade AluminumThis subcontract involves the procurement and delivery of raw aircraft-grade aluminum to support prime contractors working on Navsup Weapon Systems Support projects for the Department of Defense. The scope of work requires the sourcing of specific aluminum alloys and tempers that strictly adhere to Technical Data Package requirements. To ensure quality and traceability, the provider must supply Mill Test Reports for all certified raw aluminum stock delivered. Compliance is a critical component of this agreement, specifically regarding the Buy American and Balance of Payments Program domestic end product certifications. The opportunity is categorized under NAICS code 332410, with a response deadline set for November 5, 2026.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 16 hours ago

DEADLINE

Military-Grade Packaging and CratingThis subcontract involves providing specialized packaging and crating services for aircraft structural components to support prime contractors on Navsup Weapon Systems Support projects. The scope of work focuses on the secure packaging of aluminum panels, requiring strict adherence to MIL-STD-2073 standards. This process includes the application of MIL-SPEC corrosion inhibitors and the use of specific cushioning and military-grade crates to ensure the integrity of the components during transit to DLA Distribution Cherry Point. The project is managed under the Department of Defense and falls under NAICS code 488991. Interested parties must submit their responses by November 5, 2026, to meet the requirements for delivering properly packaged and labeled structural panels.

Packing and Crating

POSTED

about 16 hours ago

DEADLINE

Fabrication of Structural Aluminum PanelsThis subcontract involves the fabrication of structural aluminum panels for prime contractors supporting Navsup Weapon Systems Support projects under the Department of Defense. The manufacturer is required to utilize precision machining and forming equipment to produce aircraft-grade aluminum panels in strict accordance with TDP Version 001. All finished products must feature markings that comply with MIL-STD-130. To ensure operational excellence, the provider must maintain a quality control system that meets ISO 9001, Mil-I-I-45208A, or Mil-Q 9858 standards. This procurement falls under NAICS code 336413, with a response deadline set for November 5, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Aircraft Vacuum Pump ComponentsThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the supply of aircraft vacuum pumps (NIIN 015637820) and individual replacement parts or repair kits. The contractor is responsible for sourcing and delivering either new or refurbished pumps and components to prime contractors working on Department of the Navy projects. The agreement requires strict adherence to the Buy American Act under DFARS 252.225-7000, necessitating certification that domestic content exceeds 55 percent or that the items qualify as commercially available off-the-shelf products. The opportunity is categorized under NAICS code 336413, with a response deadline set for November 5, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS