Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on April 16, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Replace Windows and Doors Multi Dorms, FAC 31212, 31213, 31215, 31216

Closed
FA8601-13-R-0044Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238350
New
SLED
Build & Install Custom Shelving and Install Owner-Supplied Akupanels in the Gift Shop
Solicitation # SMV-2742
The Science Museum of Virginia is seeking a contractor for solicitation SMV-2742 to build and install custom floating shelving and up to 57 linear feet of owner-supplied Akupanels in its gift shop located in Richmond, Virginia. The scope of work includes the fabrication of custom shelving for two specific walls, the provision of six material samples in Birch Plywood and White Oak, and the installation of Akupanels, which requires painting surrounding areas flat black and maintaining a half-inch clearance around receptacle face plates. Bidders must possess a valid business license and a Department of Professional and Occupational Regulation (DPOR) license, providing the license number or a copy with their bid. The contract will be awarded on a Grand Total basis to the lowest responsive and responsible bidder, with a preference hierarchy favoring DSBSD-certified micro businesses for bids up to 10,000 dollars and small businesses for bids up to 100,000 dollars. Bids are due by October 22, 2026, at 5:00 PM. The selected contractor must comply with the Commonwealth of Virginia Vendors Manual and general terms and conditions, including specific insurance requirements and anti-discrimination certifications. Final acceptance of the work is contingent upon a site inspection to ensure all installations are fully operational and compliant with contract specifications and codes.
Science Museum of Virginia

POSTED

4 days ago

DEADLINE

in 2 days

General Info

NAICS

238350 - Finish Carpentry Contractors

Place of Performance

Wright-Patterson AFB, OH, 45433, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts2 people available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Contacts
Robin J. TiptonContracting Officer

Full Description

Show more
***THIS NOTICE IS TO AMEND THE MAGNITUDE FOR THE SOURCES SOUGHT*** The estimated magnitude of the entire contract is between $1,000,000 and $5,000,000. The Air Force is seeking sources for a potential 100 percent set-aside for Small Business, HUBZone, Economically Disadvantaged Woman Owned Small Business (EDWOSB), or Service Disabled Veteran Owned Small Business (SDVOSB) concerns. IF ADEQUATE RESPONSES ARE NOT RECEIVED, THE ACQUISTION MAY BE SOLICITED ON AN UNRESTRICTED BASIS. This is a sources sought for planning purposes only. The scope includes the demolition and replacement of the Entry Window/Door assemblies in each living unit for the four (4) dormitory facilities 31212, 31213, 31215 and 31216. Each building comprises three (3) existing floors with single loaded corridors on each side of the building. Each entry assembly consists of one (1) existing 3ft x 7ft exterior metal door, one (1) existing window approximately 3ft x 4ft in size, one (1) metal panel which provides access to an existing fan coil unit located at the floor line on the interior and a single assembly hollow metal frame that encompasses the entire assembly. Shall supply a new insulated metal frame and insulated hollow metal exterior door along with a thermally broken aluminum window with integral screen. The project shall provide for a new insulated panel to cover the existing fan coil unit. The unit will be temporarily disconnected from hot and chilled water piping and then re-connected after new door/window assembly is put into place. The Air Force intends to award a contract with a 180 day period of performance. The estimated magnitude of the entire contract is between $500,000 and $5,000,000. NAICS Code: 238350 Size Standard: $14M. Prime contractors who are Small Business, HUBZone, EDWOSB, or SDVOSB and who intend to submit a bid for this solicitation are highly encouraged to submit the following by 3:00 p.m. (local Dayton time) on 29 April 2013: Responses should include the following: (1) a positive statement of your intention to submit a bid for this solicitation as a Prime Contractor; (2) date of HUBZone certification; and/or (3) documentation of SDVOSB status; and/or (4) EDWOSB and must provide information IAW Federal Acquisition Regulation 19.1503; and (5) listing of capabilities and/or experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact with their phone numbers, and an explanation of the relevancy of the project (limit to 5 single-sided pages); (6) documentation from surety or their agent of your capability to be bonded for bid, performance and payment bonds for this project; (7) If you are a HUBZone considering a joint venture that has not been formalized, you will need to specify the firm(s) you intend to partner with and how you plan to officially form the joint venture. Firms interested should provide the above documentation by e-mail (preferred) to Jennifer.hansen@wpafb.af.mil and robin.tipton2@wpafb.af.mil or fax 937-257-2825. All of the above must be submitted in sufficient detail for a decision to be made on the availability of interested HUBZone, EDWOSB, or SDVOSB concerns. Responses shall be limited to 5 pages. Please include your DUNS Number or CAGE Code on your response. Failure to submit all information requested would result in a contractor being considered "non-responsive" in this requirement. A decision on whether this will be pursued as a set-aside or an unrestricted basis will be posted as a modification in Federal Business Opportunities. "Be advised that all correspondence sent via e-mail shall contain a subject line that reads, FA8601-13-R-0044, "Replace Windows and Doors Multi Dorms." If sending attachments by e-mail, ensure only .pdf, .doc, or .xls documents are sent. The e-mail filters at Wright-Patterson AFB are designed to filter e-mails without subject lines or with suspicious subject lines or contents. Therefore, if this subject line is not included, or if a .zip or .exe files is attached, it may be deleted by the e-mail filters.

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, acting on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify capable sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are required for the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a fused-silica substrate, a 30 mm diameter, and a parabolic focus at 45 degrees. Technical specifications require an optical surface roughness of less than 1 nm RMS, a 20-10 scratch/dig specification, and polished backsides. The protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40 nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance testing, and documentation, including certificates of conformance and surface-measurement data. Delivery to Wright-Patterson Air Force Base must be completed within 98 calendar days after receipt of order, and the products must be warranted against defects for two years. Payment is structured as 100 percent after delivery with 30 days net terms. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026. This notice is for market research purposes only and does not constitute a solicitation or a commitment to award a contract.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Sources Sought_Midwave Camera
Solicitation # FA860127Q0011
The Air Force Life Cycle Management Center, Installation Contracting Division, is conducting market research to identify potential sources capable of providing a 1.5-5 micron midwave camera and associated accessories for the Air Force Institute of Technology at Wright-Patterson Air Force Base, Ohio. This sources sought notice is for market research purposes only and is not a request for proposals. The government is seeking capabilities packages from all interested sources, including various small business categories, under NAICS code 334516. Interested firms must submit a concise capabilities package of no more than five pages by October 29, 2026, at 3:00 PM Eastern Time to the designated points of contact. The scope of work includes the delivery of the camera system, calibration of the instrument and lens, and the provision of a protective case. The contractor will be responsible for all transportation, loading, and onsite setup, with a required delivery timeline of no more than 90 days after contract award. Technical specifications include an operating temperature range of -10 C to 45 C and a two-year warranty against defects in material and workmanship. Payment is structured as 100% upon completion of all requirements on a net 30 basis, with invoicing processed through Wide Area Work Flow. The government is evaluating the potential for a small business set-aside and requires respondents to provide detailed information regarding their socio-economic status, ownership, and compliance with FAR clause 52.219-14 regarding limitations on subcontracting.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 236220
New
Federal
SABER FY 27-32
Solicitation # FA860126R0019
The United States Air Force is soliciting proposals for the Simplified Acquisition of Base Engineering Requirements (SABER) FY27-32, a 100% 8(a) small business set-aside IDIQ contract. The selected contractor will provide all management, labor, materials, equipment, and design capabilities to execute over 100 simultaneous projects involving maintenance, repair, and minor construction of real property at Wright-Patterson Air Force Base, Ohio. The scope includes work on buildings, roads, roofs, and utilities, as well as hazardous waste remediation and design-build services from concept to 100 percent design. The contract has a maximum ceiling of 160 million dollars, which increases to 175 million dollars if the option for extended services is exercised. Performance is expected to begin within 10 days of award and spans a total period of 1,825 calendar days. Award will be based on the Lowest Price Technically Acceptable (LPTA) process. Proposals must first pass compliance gates, including a requirement for the prime contractor to be a US-owned and operated company. Technical evaluations are conducted on a pass/fail basis, focusing on the management approach and project planning and execution. Pricing is structured using RS Means line items and coefficients. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Key requirements include adherence to Davis-Bacon Act wage determinations for Montgomery and Greene Counties, compliance with NIST SP 800-171 cybersecurity standards, and the provision of a minimum one-year warranty on all construction work.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS