Request for Information for the Overhaul of Dynamic Components utilized on the MH65 Aircraft

Request for Information (RFI): The United States Coast Guard (USCG) Aviation Logistics Center (ALC) is seeking qualified contractors with the facilities, equipment, skills, knowledge, and resources required to overhaul the MH-65 dynamic components. Service will be required to be performed in accordance with (IAW) the most up to date Original Equipment Manufacturer (OEM) Airbus Helicopters (Cage Code F0210) Component Maintenance Manual (CMM). The contractor shall be required to perform all repair and overhaul activities IAW the OEM's technical requirement. This is not a request for quote or proposal. This RFI is for market research purposes only and is not to be construed as a commitment by the Government. This is not a solicitation announcement for quotes/proposals and no contract will be awarded from this announcement. This RFI notice has been issued to survey the market to identify possible sources for consideration. This notice is to assist the USCG in determining potential sources. All contractors responding to this RFI notice are advised that their response to this notice is not a request to be considered for a contract award. The USCG ALC requests capability statements from interested companies for the purpose of identifying OEM certified sources capable of repair and overhaul services for the items below in accordance with the OEM Overhaul Manual. The Nomenclatures, National Stock Numbers (NSN), Part Numbers (P/N) are listed below: Nomenclature NSN PN CONICAL HOUSING 1560-14-592-5266 365A31-2101-11 1560-01-HS1-8005 365A31-2101-12 1560-01-HS1-8006 365A31-2101-11US 1560-01-HS1-8007 365A31-2101-12US NON-ROTATING STAR 1615-14-392-0450 365A31-1101-14 UPPER SCISSORS LINK 1615-14-590-7813 365A31-1115-05 1615-14-374-7268 365A31-1115-04 ROTATING STAR 1615-14-369-1527 365A31-1100-05 EQUIPPED SUPPORT 1560-14-478-6410 360A32-1163-03 1560-01-HS2-1762 360A32-1163-04 MGB HOUSING 1615-14-592-5258 365A32-2046-15 1615-01-HS1-6660 365A32-2049-18 1615-01-HS1-4739 365A32-2049-07 1615-01-HS1-5136 365A32-2046-11 1615-14-SR1-2057 365A32-2046-10 RGB G4 CASING 1560-01-HS1-4630 365A32-7108-00 MAIN ROTOR SHAFT 1615-14-475-7312 365A31-1179-05 BEARING,SPIDER PLT 3120-01-HS2-0231 365A33-3541-01 RING BEVEL GEAR 3020-14-389-4416 365A32-1058-22 HOUSING,MECHANIC DR 1615-14-387-9474 365A32-4342-03 BOX, FORWARD RH 1615-14-374-7705 365A32-4340-02 BOX FWD ASSY 1615-14-376-0239 366A32-1022-01 CASE FWD LH ACC/DR 1615-14-390-1438 366A32-1024-02 CROSS BEAM W/40MM 1560-01-HS1-6052 365A38-3023-25 365A38-3023-25CG 365A38-3023-25CGUS CASING ASSY,GB,TAIL 1615-14-472-7357 365A33-6137-03 1615-14-387-9489 365A33-6137-02 SHAFT,ROTOR WHEEL 1680-01-HS2-6854 365A33-6104-05 1680-01-HS2-6853 365A33-6104-04 1680-01-HS2-6852 365A33-6104-06 1680-01-HS2-6851 365A33-6104-07 UPPER STOP 1615-14-382-6596 365A31-1900-20 LEVER 1615-14-376-0445 366A32-1111-21 BEVEL GEAR INPUT 3020-14-374-7690 365A32-4129-03 Please respond to the following questions in additions to submission of your company's capability statement: 1. Is your company the OEM or OEM Service Center certified? 2. Is your company capable of performing repair/overhaul for the Part Numbers identified above? 3. Does your company have the ability to obtain OEM replacement parts? 4. Is your business a large or small business? If small, define your company's socioeconomic classification. 5. If your company is a small business, are you capable of performing at least 50% of the work, in order to comply with Federal Acquisition Regulation (FAR) Clause 52.219-14, specifically 52.219-14(c)(1), - At least 50 percent of the cost of contract performance incurred for personnel shall be expended for employees of the concern. Does the company send out work to subcontractors? If so, how much work and what type of work is subcontracted? 6. What is your company's estimated lead time for the repair and overhaul of these items? 7. Does your company offer warranty on repairs/overhauls? If yes, what is the standard warranty? 8. Is this work exempt from the Service Contract Labor Standards or does it apply? State the exemption if applicable. 9. Where is your Maintenance Repair facility located? 10. Can your company provide the required documentation as follows? Potential offerors must possess and be capable of maintaining and/or providing the following documentation: a. Federal Aviation Administration (FAA) Repair Station Certificate, or: b. European Aviation Safety Agency (EASA) Part 145 certificate equivalent, and: c. A certification or letter as an OEM approved Maintenance Repair Facility. After the review of the responses to this sources sought announcement, and if the USCG still plans to proceed with the acquisition, a solicitation announcement will be published on Beta.Sam.gov website. Responses to this RFI synopsis are not adequate responses to any future announcement. All interested offerors will have to respond to the solicitation in addition to responding to this RFI synopsis. Responses to this RFI synopsis are NOT a request to be added to a prospective offerors list or to receive a copy of the solicitation. Reimbursement will not be made for any costs associated with providing information in response to this announcement and any follow-up information requests. Closing date and time for receipt of response is August 31, 2021 at 4:00 pm EDT. Telephone responses will not be accepted. Responses should be submitted to Livia.M.pippen@uscg.mil. Please indicate 70Z03821RB2000008 in the subject line.