Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Request for Information - MADIS and L-MADIS Electronic Warfare (EW) System

Active
M67854-26-I-0199Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Marine Corps, under the Department of Defense, is seeking information on the Marine Air Defense Integrated System (MADIS) and the Light-MADIS (L-MADIS) Electronic Warfare (EW) systems through a Request for Information with solicitation number M67854-26-I-0199. This sources-sought notice, posted on July 6, 2026, seeks industry input on current capabilities, technological advancements, and potential solutions that align with the Marine Corps’ need for scalable, mobile, and integrated EW systems to enhance air defense against evolving aerial threats. Responses are due by August 3, 2026, and the contracting office is located at Quantico, Virginia, with primary point of contact Justin Hempe and secondary contact Stasia Baker available for inquiries. The NAICS code 334511 identifies this effort within the Electronic Component and Product Manufacturing sector, indicating a focus on advanced hardware and software systems for tactical EW applications. The opportunity is open to all interested parties without a specific set-aside, emphasizing broad industry engagement to inform future acquisition decisions. The requested information will help shape potential follow-on solicitations for procurement and fielding of MADIS and L-MADIS systems to support Marine Air-Ground Task Force operations. All relevant details are accessible via the provided SAM.gov link.

General Info

Marine Corps seeks industry input on MADIS and L-MADIS electronic warfare systems for mobile air defense.

Agency

Department Of Defense → CommanderView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Quantico, VA, USA

Set-Aside

NONE

Documents

(2)

RFI.M6785426I0199.QuestionandAnswers.xlsx

XLSX

RFI for Marine Air Defense Integrated System Electronic Warfare

DOCXrfi

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSources Sought
Posted

Sources Sought

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Commander
Contacts2 people available
OfficeQUANTICO, VA, 22134-6050, USA
Organization / Agency
Department Of Defense → Commander
View Agency Profile
Office AddressQUANTICO, VA, 22134-6050, USA
Contacts

Full Description

Show more

Request for Information - Marine Air Defense Integrated System (MADIS) and Light-MADIS (L-MADIS) Electronic Warfare (EW) system.


Please find the RFI in the Attachments Section. 


21 July 2026, NOTICE UPDATE: M67854-26-I-0199: Questions and Answers Document has been posted to this notice. 

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
SEALING STRIPThe contract pertains to the procurement of a sealing strip with NSN 6610-00-126-6113 and part number 10201-004, under solicitation SPE4A5-26-T-303K, requiring delivery of 11 units within 333 days from the contract date, with delivery terms FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, materials, and unit containment as detailed, and marking must comply with MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and shipment is directed to the parcel post address in Tracy, California. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract specifies the unit of issue as each (EA), with a total price of $11.00, and identifies Hien-Van Trinh as the primary point of contact for the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, URThe contract specifies the procurement of a urethral catheterization kit containing a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, designed for infection control, and packaged as a complete unit with a drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, a prefilled 10 cc sterile water syringe, forceps, and a prefilled 10 cc lubricant syringe. Each package contains ten kits, and the unit of issue is one pack (PG) of ten. The kits must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and government delivery. All packaging must comply with DLA Packaging Requirements, including sealed unit containers and commercial shipping containers ensuring safe delivery at the lowest cost, and must be labeled according to Medical Marking Standard No. 1, superseding MIL-STD-129. Labels must include the NSN, manufacturer and CAGE code, manufacture and expiration dates, and contract or lot number. The product is FDA-regulated, and vendor submissions require referral for confirmation. The kits are to be delivered FOB destination within 20 days, with zero variance allowed in quantity, inspected and accepted at the destination. Palletization must adhere to DLA standards, and shipping must use traceable means—parcel post is prohibited. Two delivery points are specified: one to Fort Bragg, NC, and another to the USS Charleston LCS 18 via vessel shipment. The NSN for the item is 6515016152124, with two line items under solicitation SPE2DS-26-T-254Y, each for one pack, with required delivery dates of July 22 and July 23, 2026, respectively.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETERThe contract specifies the procurement of pediatric-sized non-invasive blood pressure cuffs, with bladder dimensions of 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. This item serves as a replacement component for NSNs 6515-01-582-4060 and 6515-01-582-4072, and is identified by NSN 6515-01-593-8773 and Philips part number 40401B. Three units are required, each to be delivered as a single unit of issue, with a firm delivery deadline of 20 days after award, FOB destination, and no variance permitted in quantity. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must also meet ASTM D3951 standards, with DLA Master List of Technical and Quality Requirements taking precedence. Packaging must ensure protection from damage and be suitable for commercial shipping, using sealed unit containers and secure exterior shipping containers capable of safe transport at the lowest rate. The shipment must be traceable and cannot be sent via parcel post. Delivery is to the U.S. Air Force Medical Command at Fort Sam Houston, San Antonio, Texas, with the required delivery date set for July 23, 2026. The supplier, Philips North America LLC, must adhere to all DLA packaging and marking requirements under RP001 and ensure full compliance with government procurement specifications for medical equipment.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
RAZOR, SHAVE BIOPSYThe contract is for the procurement of 1 package of 400 disposable, sterile, flexible razor shave biopsies with plastic handles, under National Stock Number 6515-01-600-0478, issued by the Department of Defense through the Medical Supply Chain MD SURG FSF. The item must be packaged commercially, protected against damage, and meet strict packaging standards including ASTM D3951 and DLA’s RP001 for palletization, with labeling governed by Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items. Each unit must be marked with the NSN, manufacturer name and CAGE code, contract number, lot number, and the phrase "MFD" followed by the date of manufacture, along with the expiration or retest date. The product must have a 36-month shelf life, with no more than five months elapsed between manufacture and delivery to the government, and is subject to destination inspection and acceptance by the government at Patrick Air Force Base, Florida, with FOB destination terms assigning all risk and cost to the contractor until arrival. The solicitation requires bidders to specify the source and part number, and mandates electronic submission through the DLA Internet Bid Board System by July 21, 2026, with delivery expected within 20 days after order placement. The contract incorporates numerous Federal Acquisition Regulation clauses including those on prohibited confidentiality agreements, System for Award Management maintenance, simplified acquisition terms, contract type, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, authorization and consent, accelerated payments to small business subcontractors, safeguarding contractor information systems, changes, unenforceability of unauthorized obligations, and Navy-specific requirements for levy on payments, NIST SP 800-171 assessments, and subcontracting for commercial products. A special DFARS clause, 252.223-7001, requires strict compliance with OSHA’s Hazard Communication Standard, submission of complete Safety Data Sheets in accordance with Federal Standard No. 313 prior to award, and updated documentation if material composition changes. Offerors must complete required representations and certifications through DIBBS, including UEI and CAGE code disclosure if providing covered telecommunications equipment, and must indicate their size status and socioeconomic classifications. Payment must be submitted via Wide Area WorkFlow, and the contract type is not explicitly defined but appears intended for a micro-p
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
RESUSCITATOR, HAND OPERThe contract specifies the procurement of a hand-operated resuscitator designed for infant use, featuring a disposable single-shutter valve system, an integrated handle, and a thin-walled compression bag for ease of operation and portability. Each unit includes a medication port and is packaged with an infant mask, sold as a single package containing twelve complete units. The product is color-coded for clear identification of infant size and comes in an individual resealable plastic carrying bag. All units must be sealed in suitable containers to prevent damage during transit, and commercial packaging standards must be followed per the procurement document. The items must be shipped in exterior containers that ensure safe delivery to the point of destination at the lowest possible rate, with export packaging applied when necessary. All items are subject to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be properly marked accordingly. The unit of issue is a package of twelve, and the NSN is 6515-01-610-7720. Technical and quality requirements referenced under RA001 must be met and are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging conforms to DLA requirements, and non-accepted supplies must not bear government identification. The contract is issued under solicitation SPE2DS-26-T-255W with a response deadline of July 27, 2026, and delivery is required within 84 days of award to APO ZIP 09227-0000. The contract falls under NAICS code 334511 and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
ANEMOMETERThe contract specifies the procurement of an anemometer with NSN 6660-01-559-3025 and part number 5725, requiring a quantity of 15 units to be delivered FOB origin within 171 days, with a need ship date of January 17, 2027, and an original required delivery date of December 29, 2026. Each unit is priced at $15.00, resulting in a total contract value of $225.00. The item must comply with DLA packaging requirements per RP001 and be prepared for delivery according to MIL-STD-2073-1E, with specific packaging methods including preservation type 10, no cushioning material, and unit containers coded as E5. Marking must follow MIL-STD-129, including the special marking code 05 indicating the item is a delicate instrument, and physical identification must adhere to RQ017. Inspection and acceptance occur at destination, with sampling governed by MIL-STD-1916 or ASQ H1331, Tables 1, enforcing a zero-defect acceptance policy unless otherwise stated. Attributes classified as critical, major, or minor are to be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced by R or I numbers are controlled by the DLA Master List as of the solicitation or award date, depending on acquisition size. The delivery address is DLA Distribution San Joaquin in Tracy, California, and transportation details must align with DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE4A5-26-T-298Y with a NAICS code 334511 and primary point of contact Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Commander

Same awarding agency

NAICS: 611430
New
Federal
Knowledge Management Officer Qualification (KMOQ) Distance Learning Course ModernizationThe United States Marine Corps, through Headquarters Marine Corps Deputy Commandant for Information, is seeking market input to modernize its Apprentice-Level Knowledge Management Officer Qualification (KMOQ) distance learning course, originally based on the 2021 Information Management Officer Qualification (IMOQ) curriculum. This Request for Information is aimed at identifying capable vendors, particularly small and socioeconomically disadvantaged businesses, to redesign and deploy an updated course aligned with the 8055 Military Occupational Specialty Training and Readiness standards. The effort spans an 18-month period divided into two phases: a six-month base period for auditing legacy material, mapping Knowledge, Skills, and Abilities to current standards, and designing the new curriculum architecture; followed by a twelve-month option period for developing interactive eLearning content using tools like Articulate 360 or Adobe Captivate, conducting iterative testing, and deploying the final SCORM 2004 v.3-compliant course onto MarineNet with full transfer of uncompiled source files and unlimited rights to the Government. The contract type will be Firm-Fixed Price, and no classified access is required. Respondents are expected to demonstrate proven experience developing DoD training programs for Navy and Marine Corps learning management systems, especially with SCORM packaging and MarineNet deployment. Technical submissions must detail past work satisfying military training standards, software capabilities, and subject matter expertise in Knowledge Management and Knowledge Engineering within modern command and control frameworks. In addition to technical capability statements, responders must provide administrative details including company size, socioeconomic status, active contract vehicles, and concurrence or recommendations on the assigned NAICS 611430 and PSC U008 codes. The Government is also requesting Rough Order of Magnitude cost estimates for both phases, along with feedback on the realism of the schedule, risks under a Firm-Fixed Price structure, and the potential applicability of commercial-off-the-shelf solutions. All responses must be submitted as a single document of no more than five pages by 10:00 AM EDT on July 28, 2026, to the designated point of contact. This RFI is strictly for market research and does not obligate the Government to issue a solicitation or award a contract.
Professional and Management Development Training

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334111
New
Federal
iPrime Equipment for GPN MCPP PhilippinesThe Marine Corps Logistics Base is seeking approval to acquire specialized equipment under solicitation M6700426Q0056 to support the Global Positioning Network mission within the Marine Corps Prepositioning Program in the Philippines. The procurement includes six TSL 1166 Bluetooth Rugged UHF RFID Readers, fifteen Zebra DS3678-SR Cordless Standard Range Handheld Barcode Scanners with USB cradle kits, and twenty DT311YR DT Research Rugged Tablets with accompanying accessories. These items are designated as brand name only purchases to ensure interoperability and operational reliability in demanding field conditions. The requirement is critical for enabling efficient logistics, asset tracking, and data capture capabilities in support of deployed forces. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and no set-aside is being applied, meaning all eligible contractors may compete. The solicitation is managed by the Department of Defense through the Commander’s office, with the office located in Albany, Georgia, and the equipment to be delivered to Jacksonville, Florida. Primary point of contact for inquiries is Dayna Williams, with Steven K Wynne as the secondary contact. All responses must be submitted through the SAM.gov portal as specified in the official UI link, and vendors should ensure full compliance with the brand name specifications and delivery expectations for operational readiness in theater.
Electronic Computer Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 561920
New
Federal
Hybrid Marine Corps Contracts Industry Day Hosted by Portfolio Acquisition Executive – Marine Corps (PAE MC) and including Marine Corps Systems Command (MCSC/MARCORSYSCOM), Portfolio Acquisition Executive Mission Systems (PAE MS) and Headquarters Marine CThe Hybrid Marine Corps Contracts Industry Day, hosted by the Portfolio Acquisition Executive – Marine Corps in collaboration with Marine Corps Systems Command, Portfolio Acquisition Executive – Mission Systems, and Headquarters Marine Corps Installations & Logistics, is scheduled for August 20, 2026, from 9:30 a.m. to 1:30 p.m. EST. The event will be held in a hybrid format with limited in-person seating at Quantico, Virginia, and virtual access via Microsoft Teams. Industry partners are restricted to two in-person registrations per organization, and all attendees must register by 11:00 a.m. EST on August 17, 2026, via a manually entered registration link. Confirmation details including the in-person address and virtual meeting URL will be sent only to those who complete registration correctly, with emphasis placed on ensuring accurate contact information, as incorrect email addresses will result in no invitation. The event features a structured agenda including briefings from key acquisition leaders, a 45-minute Q&A session for industry engagement, and closing remarks, with a focus on emerging Marine Corps capabilities, upcoming procurement opportunities, and strategic initiatives. Formal contract opportunities under solicitation number M67854-26-I-9003 will be posted separately on SAM.gov within five business days after the event. For assistance, participants should contact MCSC_CTIndustry@usmc.mil, and attendees should be aware that technical disruptions may result in cancellation of the live virtual stream, with slide decks distributed afterward.
Convention and Trade Show Organizers

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 334310
New
Federal
Audio and Video PackageThe contract titled Audio and Video Package seeks to modernize and expand broadcast and field production capabilities through the acquisition of comprehensive video production, recording, monitoring, lighting, camera support, and signal-routing equipment. This initiative is aimed at enhancing operational readiness and media output by providing advanced technical infrastructure necessary for high-quality content acquisition and transmission across diverse environments. The equipment will support both studio and remote field operations, ensuring seamless integration with existing systems and scalable performance for future mission requirements. Solicitation number M0026426Q0129 was posted on July 17, 2026, with a response deadline of July 24, 2026, and is classified under NAICS code 334310 for communications equipment manufacturing. The contracting activity is led by the Commander under the Department of Defense, with the office located in Quantico, Virginia, and performance expected in Washington, District of Columbia. Primary point of contact is Gabriel Mendez, with Erin Silverthorn serving as the secondary contact, both reachable via official military email addresses. The solicitation is open to qualified vendors, with no specific set-aside type designated, and all responses must be submitted through the official SAM.gov portal prior to the deadline.
Audio and Video Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 611710
New
Federal
Training Analysis Evaluation Product (TAEP)The Marine Corps Systems Command plans to award a single Indefinite Delivery Indefinite Quantity (IDIQ) contract exclusively to an 8(a) certified small business for the Training Analysis Evaluation Product (TAEP), with the solicitation number M6785426R8017 expected to be released in the fourth quarter of FY26. This procurement is set aside for 8(a) small businesses under FAR Subpart 19.8 and will be primarily Firm-Fixed-Price with limited cost-reimbursable elements, awarded on a best-value tradeoff basis. The contract will support the full life cycle management of Marine Corps training systems through task orders that include cognitive, needs, gap, job task, and training system analyses; evaluations of training effectiveness, fidelity, and functionality; and the development of key documentation such as training situation documents, evaluation reports, and instructional requirements packages. All work will be performed within a military environment and may involve supporting new technology acquisition, major end item procurement, and sustainment of existing training systems. The primary NAICS code is 611710 with a size standard of $24 million, and the Product Service Code is U008. The contract will allow for maximum flexibility through expedited task order issuance, with Task Order Performance Work Statements superseding the base PWS in case of conflict. Responses must be submitted via SAM.gov, and all offerors are required to maintain an active SAM registration with current representations and certifications. Questions should be directed to Karla Logothety or Anitra Kinsey at the provided email addresses.
Educational Support Services

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 811310
New
Federal
Corrosion Repair Facility (CRF) Collateral Equipment Maintenance Services, Okinawa, JapanThe United States Government is seeking information from potential vendors to support comprehensive maintenance, repair, and logistical services for collateral equipment at the Corrosion Repair Facility in Building 616, Camp Kinser, Okinawa, Japan. This request is part of market research under solicitation number M67854-26-I-5116, aimed at evaluating the availability and capabilities of qualified sources, including both U.S. and local or foreign entities, to inform future contracting efforts. The scope encompasses scheduled preventative maintenance, corrective repairs, emergency troubleshooting, and management of consumables and spare parts inventory to ensure continuous operational readiness of facility equipment. Responses are due by August 16, 2026, and the solicitation is classified as a sources-sought notice with no set-aside preference, allowing all eligible entities to participate. The activity is managed by the Department of Defense through the Commander’s office, with the point of contact based in Quantico, Virginia, while the performance location is in Okinawa, Japan. All responses must address the specific service requirements and demonstrate technical and logistical capacity to operate in a remote, high-humidity environment typical of Okinawa. Inquiries should be directed to Kimberly Stone or Jessica M. Munoz at the provided email addresses for clarification or additional details regarding the anticipated future contract.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

6 days ago

DEADLINE

in 25 days
View Details
NAICS: 541715
New
Federal
Request for White Papers - Organic Counter Small Unmanned Aircraft System (O-CsUAS) Dismounted SensorsThe U.S. Marine Corps is seeking white papers from qualified respondents to develop a sensor system capable of providing self-defense for dismounted Marines against small unmanned aircraft systems, known as the Organic Counter Small Unmanned Aircraft System (O-CsUAS) Dismounted Sensor System. This initiative is open to contractors registered in the System for Award Management (SAM) with active status and no exclusions, as failure to maintain SAM registration renders an offeror ineligible for award. Access to the solicitation documents requires submission of the company’s CAGE Code through the PIEE Solicitation Module, with U.S. citizens receiving documents by the close of business the day after verification, while foreign entities must undergo a formal foreign disclosure process and provide their CAGE Code, country of origin, and specific document requests via email. All interested parties must register via PIEE and adhere to the updated enclosures, with the most recent revisions posted on July 15, 2026, highlighting changes to Section 2 in red text. The solicitation, numbered M67854-26-R-0131 under NAICS code 541715, has a firm deadline of July 23, 2026, at 8:00 p.m. Eastern Time, with responses to be submitted through the designated portal. The primary points of contact for inquiries are Ms. Katherine Presutto, Contract Specialist, and Ms. Stasia Baker, Contracting Officer, both of whom can be reached via email and must be referenced by the Notice ID in all correspondence. The solicitation is issued by the Department of Defense, specifically the office located in Quantico, Virginia, and no set-aside designation is applied, meaning all eligible domestic and foreign entities may respond provided they meet the access and eligibility criteria. Technical submissions must address the defensive capability against dismounted threats from small UAS, and respondents are encouraged to align their proposals with the latest version of the enclosures, which have been updated to reflect clarified requirements and technical specifications. Participation requires strict compliance with federal acquisition protocols, including data handling procedures for Controlled Unclassified Information, and all materials must be secured and transmitted in accordance with government security guidelines.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

7 days ago

DEADLINE

in 1 day
View Details