Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Request for Interested Manufacturers for the C-5 Interface Circuit Card Assembly (CCA), NSN: 5998-01-666-0874UC / NSN: 5998-01-666-0853UC and 5998-01-666-0840UC.

Active
SPRWA1-27-00043Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. government is seeking information from potential manufacturers capable of producing the Interface Circuit Card Assembly (CCA) identified by NSNs 5998-01-666-0874UC, 5998-01-666-0853UC, and 5998-01-666-0840UC, which are critical components used in the C-5 aircraft’s Automated Flight Control System, Communication/Navigation Panel, and Cursor Control Panel. These CCAs enable ARINC 429 communication between the aircraft’s serial bus and the Single Board Computer, incorporating line drivers, receivers, and interface circuits essential for system functionality. The original equipment manufacturer, Extant Aerospace (CAGE 22830), is the sole source due to exclusive possession of technical data, design knowledge, and repair capabilities, with the government holding no releasable drawings or specifications. As such, procurement is planned under sole source authority via FAR 6.103-1, recognizing no other supplier currently has the required expertise to ensure compatibility and performance. Interested parties may respond by August 7, 2026, by providing detailed information on their company profile, CAGE and UEI codes, business size classification, manufacturing capabilities, relevant experience, prior contracts or part numbers, and production timelines. The notice is explicitly for market research and does not constitute a solicitation or binding contract; responses will inform the government’s procurement strategy and potential pathway to sole source award. All submissions must be directed to Erika Bell and Rebecca Taylor at the provided email addresses, and no reimbursement will be provided for response-related costs. The effort is managed by the Defense Logistics Agency Aviation at Warner Robins Air Force Base, Georgia, under NAICS code 334418.

General Info

U.S. government seeks sole-source manufacturers for critical C-5 aircraft CCAs with exclusive technical data held by Extant Aerospace.

Agency

Department Of Defense → Ga DLA Aviation At Warner RobinsView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

GA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ga DLA Aviation At Warner Robins
Contacts2 people available
OfficeROBINS A F B, GA, 31098-1813, USA
Organization / Agency
Department Of Defense → Ga DLA Aviation At Warner Robins
View Agency Profile
Office AddressROBINS A F B, GA, 31098-1813, USA
Contacts

Full Description

Show more

SUBJECT: Market research is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of the Interface Circuit Card Assembly (CCA), NSN: 5998-01-666-0874UC (PN: 4V10457-101A) / NSN: 5998-01-666-0853UC (PN: 4V10436-101A) and 5998-01-666-0840UC (PN: 4V10469-101A).


ITEM DESCRIPTION:


These items are used on the C-5 aircraft. The Interface Circuit Card Assembly (CCA) is contained in the Automated Flight Control System (AFCS) Panel, Communication/Navigation Panel (CNP), and Cursor Control Panel (CCP) Assemblies.  The CCAs provide Aeronautical Radio Incorporated (ARINC) 429 communications with the aircraft bus. They consist of a line driver, two-line receivers, and interface circuits for the Integrated Panel. The line driver and line receivers interface the aircraft’s ARINC 429 serial bus differential signals with the ARINC 429 communication interface on the Single Board Computer CCA. The Interface CCA also interfaces the Integrated Panel directly to Single Board Computer CCA.


IMPEDIMENT TO COMPETITION:


The original equipment manufacturer for this item is Symetrics Industries, LLC doing business as Extant Aerospace, CAGE: 22830, which maintains its data and repair. The Government does not own any data, drawings, schematics, or any other releasable technical data in support of this requirement. As a result, Extant Aerospace, CAGE: 22830, is the only known source with adequate knowledge of the C-5 Interface Circuit Card Assembly (CCA) performance requirements and possession of the required technical data and capabilities needed to produce these items and ensure compatibility of the equipment.


INTEREST:


The DLA/AWB Contracting Office intends to award a sole source contract to Extant, CAGE 22830, for the manufacture of the following components: C-5 Interface Circuit Card Assembly (CCA), NSN: 5998-01-666-0874UC / NSN: 5998-01-666-0853UC and 5998-01-666-0840UC in support of the C-5 program. Other interested parties may identify their interest and capability to respond to the requirement no later than 06 August 2026 by emailing Erika Bell at erika.bell.2@us.af.mil and Rebecca Taylor at rebecca.taylor.21@us.af.mil.  The Government intends to procure these items using Other Than Full and Open Competition as prescribed by Revolutionary FAR Overhaul (RFO) 6.103-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements.


Please provide the information listed below along with your response:


  1. Company name, address, and point of contract
  2. CAGE Code and UEI
  3. Business size (e.g., Small, 8(a), HUBzone, SDVOSB)
  4. Description of manufacturing capabilities and relevant experience
  5. Previous contracts or part numbers demonstrating similar work
  6. Estimated lead times and production capacity

DISCLAIMER


This sources sought synopsis is for Market Research purposes only and does not constitute a solicitation. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government will not reimburse any costs incurred in responding to this notice. No solicitation exists at this time; however, information obtained may be used to determine acquisition strategy, including potential set asides and source development efforts.

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBThe contract is for the procurement of one circuit card assembly identified by NSN 5998-01-623-2545 under solicitation SPE7M0-26-Q-1098, with a firm fixed price and zero variance in quantity. Delivery is required within 30 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item must comply with stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific preservation method GX, use of E5 containers, and unique marking code 39 indicating ESD sensitivity. ESD and EMI protection are mandatory and must use qualified materials listed on QPL-81705, specifically MIL-PRF-81705 Type I and Type III barrier materials, with all handling and packaging performed at approved ESD workstations. The contractor must maintain a formal ESD control program compliant with ANSI/ESD S20.20, trained personnel, and approved packaging sources, with no deviations allowed. Mercury and mercury compounds are strictly prohibited in any phase of preservation or packaging. The item is subject to IUID requirements under MIL-STD-130 and DFARS 252.211-7003, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List. Shipping must use traceable freight methods only, with delivery addressed to the Naval Air Station in Key West, Florida, and the delivery schedule is tied to a government need date of May 5, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLYThe contract is for the procurement of four circuit card assemblies identified by NSN 5998-01-603-6648 under solicitation SPE7M1-26-Q-1295, issued as a Total Small Business Set-Aside with a firm fixed price and zero variance in quantity. The delivery is due 207 days after the award date, with inspection and acceptance occurring at the destination. The item must comply with all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements, including specific directives on configuration change management and the removal of government identification from non-accepted supplies. Although the cited technical data is incomplete, the supplied assemblies must fully meet the requirements of both the referenced specifications and the part number listed. For printed circuit boards, MIL-PRF-31032 is recommended over the inactive MIL-PRF-55110 and MIL-P-50884 standards, while alternative quality assurance methods must be established for materials previously governed by the canceled MIL-S-13949. The supplier must adhere to DLA packaging requirements under MIL-STD-2073-1E and ensure proper ESD and EMI protection using qualified materials specified in MIL-PRF-81705, including Type I and Type III barrier materials, with all packaging sourced only from manufacturers on the QPL-81705 list. The assemblies must be handled and packaged at approved ESD/EMI protective workstations, with physical and electrostatic safeguards applied to all leads, pins, and terminals to prevent damage during transport. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and all marking and packaging must align with MIL-STD-129, including the special ESD-sensitive marking code 39. The delivery point is Robins AFB, Georgia, and the contract falls under NAICS code 334418 with a required response deadline of August 9, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 16 days
View Details
NAICS: 334418
New
Federal
Beam Position Monitor (BPM) Major Assembly - Group B, C and DThe University of California, acting on behalf of the Lawrence Berkeley National Laboratory, has issued Request for Proposal AA-2026-08 for the procurement of Beam Position Monitor (BPM) Chassis Major Assemblies designated as Group B, C, and D under a Total Small Business Set-Aside. This solicitation, released on July 20, 2026, and updated on July 24, 2026, to include clarification document AA-2026-08, requires offerors to deliver fully assembled printed circuit boards including SPB2, PMB, LBL208_PMOD, FPD, AFE Backside, CLK104A, and other specified components, in accordance with detailed engineering drawings, IPC workmanship standards, and IPC-9252 test documentation requirements. Deliverables are structured in staged phases: four first article units per board followed by two production batches of 40 and 86 units each, contingent upon formal Hold Point approval after successful first article inspection. All work must be performed using ESD-safe packaging, maintain strict traceability, and adhere to configuration control defined by internal LBNL documentation such as AL-1922-5262 and AL-1888-0614, without relying on MIL-STD references. The solicitation is open exclusively to small businesses with 750 employees or fewer under NAICS code 334418, and offerors must submit a completed Sample Subcontract acceptance, Price Proposal Schedule (Attachment A), Rep Cert Form, and ALS-U Quality Evaluation Survey as mandatory components of their proposal. Proposals must be submitted electronically no later than 3:00 PM Pacific Time on July 31, 2026, to Aanoop@lbl.gov and must be divided into three volumes: a cover letter, a technical volume demonstrating compliance with the Statement of Work, and a business volume containing contractual acknowledgments and pricing. Award will be determined through a trade-off process, where the best overall value—considering technical capability, manufacturing capacity, past performance, quality assurance, delivery schedule, and price—will be selected, with price explicitly not weighted as the decisive factor. The contract prohibits exceptions to the Sample Subcontract unless fully justified in writing, and requires strict adherence to federal compliance obligations including the Buy American Act, drug-free workplace requirements, and representations under FAR 52.204-2
Berkeley National Labor - DOE Contractor

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLYThis contract is for the procurement of 42 units of a Circuit Card Assembly identified by NSN 5998-01-485-9243 and part number B566 DR-IAC24, sourced from Lockheed Martin Corp under solicitation SPE7M1-26-T-227Y. Delivery is required within 168 days from the contract award date, with shipment FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including special ESD marking code 39, indicating susceptibility to electrostatic discharge. All packaging must incorporate qualified ESD and EMI protective materials per MIL-PRF-81705, with barrier materials sourced exclusively from manufacturers on the QPL-81705 list, and components must be protected against physical damage, lead bending, and electrical degradation. Mercury and mercury-containing compounds are prohibited unless specifically exempted for certain functional components like batteries or instruments, and any exempted portable devices must include a secondary containment system per NAVSEA 5100-003D. The contractor must comply with DLA’s packaging requirements, cybersecurity CMMC Level 2 self-assessment, and all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and the original delivery deadline is December 7, 2026.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334418
New
DIBBS
RELAY, SOLID STATEThis contract specifies the procurement of 18 solid state relays with part number 86031-001 and NSN 5945012914462, supplied by TE Connectivity Corporation under solicitation SPE7M2-26-T-5755. The requirement is for delivery in 234 days, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA-specific packaging requirements, including palletization and marking per MIL-STD-129, with special marking code ZZ indicating unique contract conditions. The relays are designated as a critical application item and must adhere to strict configuration control and engineering change procedures. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified exemptions such as functional use in batteries, fluorescent lamps, sensors, weapon systems, and chemically defined reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. All individual unit packages must be marked in accordance with IPC/JEDEC J-STD-609 to clearly identify lead content and other material attributes, with placement specifications detailed in the standard. The delivery address is DLA Distribution Depot Hill in Hill AFB, Utah, and the required ship date is March 26, 2027, with the original delivery deadline set for April 9, 2027. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition size.
NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBThis contract pertains to the procurement of two circuit card assemblies identified by NSN 5998-01-597-9420 and part number 511D3001-1, under solicitation SPE7M1-26-T-231R. The delivery is due in 480 days from the contract award, with FOB origin terms and destination inspection and acceptance points. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and unit containerization, with marking adhering to MIL-STD-129 and no special marking codes applied. The items must be palletized in accordance with DLA standards and shipped to the designated delivery point at the DLA Distribution facility in New Cumberland, Pennsylvania. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specified functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA, with additional containment requirements for portable devices. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the technical and quality requirements are governed by the DLA Master List referenced in the contract, with the applicable revision determined by the solicitation or award date. The buyer is the Department of Defense through the Maritime Supply Chain, with Carrolline Kelly listed as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → Ga DLA Aviation At Warner Robins

Same awarding agency