Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace-Grade Materials for Slat Production

Active

Federal

Response Deadline11/13/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of certified aerospace-grade alloys and raw metals intended for slat production for prime contractors on DLA Aviation projects. Managed by the Department of Defense through Ga DLA Aviation At Warner Robins, the contract requires all materials to be sourced and delivered in strict accordance with T.O. 1C-5M-4-5 F/24 I/35. To ensure full compliance with aviation standards, the provider must supply comprehensive Mill Test Reports and material certifications upon delivery to the manufacturer. Eligible providers must hold either ISO 9001 or AS9100 certification to qualify for this engagement. The opportunity was posted on October 14, 2026, with a response deadline of November 13, 2026. Performance for this contract is centered in Arkansas, falling under NAICS code 331210.

General Info

Supply certified aerospace alloys for DLA Aviation slat production in Arkansas.

Agency

Department Of Defense → Ga DLA Aviation At Warner Robins

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

AR, GA, 31088, USA

Set-Aside

NONE

Documents

This scope was carved out of FD20602600058REV02.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Slat, Aircraft LH7/RH7

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:30:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ga DLA Aviation At Warner Robins

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ga DLA Aviation At Warner Robins

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified aerospace-grade alloys and raw metals for prime contractors on DLA Aviation projects. Sources and delivers materials according to T.O. 1C-5M-4-5 F/24 I/35. Provides Mill Test Reports and material certifications to ensure compliance with aviation standards. Requires ISO 9001 or AS9100 certification. Delivers certified raw materials to the manufacturer.

Similar Contracts

Same NAICS industry code

Aerospace Grade Material SupplyThis subcontract, managed by the Department of Defense through DLA DIST SAN JOAQUIN, involves the supply of certified aerospace-grade metals and high-strength materials. These materials are essential for prime contractors tasked with delivering aircraft rescue seats. The scope of work includes sourcing and certifying raw materials to strict aviation standards, ensuring that all deliveries are accompanied by mill test reports and material certifications. To maintain compliance, all materials must adhere to Federal Standard No. 313 and MIL-STD-129 for labeling and marking. The performance of this contract is centered in Tracy, California, under NAICS code 331210. The solicitation was posted on October 14, 2026, with a response deadline set for October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 5 hours ago

DEADLINE

Supply of Certified Raw Materials for Support AssemblyThis subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament for the supply of certified raw metal stock. The contractor is responsible for sourcing aerospace or defense-grade alloys that strictly comply with the Buy American Act and the Berry Amendment. To ensure all alloy and strength requirements are met, the provider must deliver Material Test Reports and Certificates of Conformance alongside the raw material stock. The procurement is designated as a Total Small Business Set-Aside under NAICS code 331210, with the place of performance located in Tracy, California. Interested parties must submit their responses by October 26, 2026. This contract serves as a critical supply chain link for prime contractors supporting defense assembly operations.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Specialty Alloy Supply for Fluid DampenersThis subcontract involves the supply of raw specialty alloys for prime contractors working on DLA Troop Support projects, specifically for fluid dampeners. The scope of work requires the sourcing and delivery of bars, tubing, or forgings that meet the metallurgical specifications of MIL-PRF-2940D for Part 120SS-1-H-C-P-G. To ensure quality and compliance, the provider must furnish certified material test reports verifying the grade and origin of all delivered materials. The contract is managed under the Department of Defense and mandates strict adherence to the Buy American Act and the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, regarding this requirement categorized under NAICS code 331210.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

Raw Material Supply for TBIS Cover AssemblyThis subcontract, issued by the Department of Defense under the agency Construction & Equipment Manu & Con, involves the supply of certified raw materials necessary for prime contractors to manufacture Cover Assembly P/N 12266-1. The selected provider must ensure all materials strictly adhere to technical data package specifications and provide all required material certifications. Additionally, the supplier is responsible for disclosing the origins of any non-domestic materials as mandated by the solicitation and managing the delivery of these materials to the designated fabrication facility. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. It was posted on October 14, 2026, with a response deadline of October 28, 2026. This procurement is specifically tailored to support DLA supply contracts through the provision of high-specification raw materials.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Materials Supply (F-16 Stabilizer)This subcontract involves the supply of aerospace-grade alloys and composites for prime contractors supporting DLA Aviation projects, specifically for F-16 stabilizer components. The provider is responsible for delivering certified raw materials that conform to Lockheed Martin drawing 16T7461 and ESA-approved technical data packages. All deliveries must include comprehensive material certifications and full traceability documentation to ensure quality and compliance. To be eligible, the supplier must adhere to the Buy American Act and maintain CMMC Level 2 certification for the handling of Controlled Unclassified Information. The opportunity was posted on October 14, 2026, with a response deadline of November 14, 2026. This requirement falls under NAICS code 331210 and is managed by the Department of Defense through DLA Aviation at Ogden.

Ut DLA Aviation At Ogden

POSTED

about 10 hours ago

DEADLINE

in about 1 month

AR400 and Carbon Steel SupplierThis subcontract agreement establishes a partnership for the supply of industrial-grade steel plates and shapes to prime contractors working on Jefferson Parish Government equipment projects. The scope of work includes the provision of 7 Gauge Carbon Steel for moldboards, AR400 Abrasion Resistant Steel for shoes, and 0.375 inch steel for side plates and support dimensions. The supplier is responsible for delivering these materials as raw or sheared steel plates and beams directly to the fabricator, with a specific requirement to provide material certifications for all AR400 steel. The procurement process is categorized under NAICS code 331210 and is managed by the Jefferson Parish Government in Louisiana. Interested parties must adhere to the timeline associated with the solicitation, which was posted on October 13, 2026, with a response deadline of October 20, 2026.

Jefferson Parish Government

POSTED

DEADLINE

Forging of Pillow Block ComponentsThis subcontract, titled Forging of Pillow Block Components, involves performing forging processes for prime contractors on DLA Weapons Support ASC projects. The primary objective is the creation of raw blanks for pillow block units, which includes the development and maintenance of custom forging dies and tooling to ensure all products meet technical data package specifications. The final deliverables are forged blanks prepared for final machining. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division and will be performed in Corpus Christi, Texas. To be eligible, contractors must hold SAE AS9100 certification and maintain US/Canada Joint Certification Program approval. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026, falling under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Grade Tubing and Fitting SupplyThis subcontract involves the supply of certified raw aerospace tubing and fittings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on sourcing high-strength alloys specifically for part number 532513-16 and delivering these certified raw materials and hardware to the designated fabricator. A critical requirement of the contract is the provision of full material traceability, which must include Mill Test Reports. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division, with performance taking place at Hill AFB. All deliverables must strictly comply with the Buy American Act. The opportunity is categorized under NAICS code 331210, with a response deadline set for October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Aerospace-Grade Nickel Alloy StockThis subcontract involves the supply of aerospace-grade nickel alloy raw material for prime contractors supporting the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The selected provider must deliver certified raw material stock that strictly adheres to the specifications outlined in Drawing NR 53711 7108795 and is required to provide comprehensive Mill Test Reports for all materials supplied. Compliance with the Buy American Act and the Berry Amendment is mandatory for this engagement. The project is categorized under NAICS code 331210, with the place of performance located in Whitehall. Interested parties must submit their responses by the deadline of October 26, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Copper-Nickel Alloy Tubing (Composition 90-10)This subcontract involves the supply of 1,776 feet of Copper Alloy Composition 90-10 tubing for the DLA Weapons Support Nuclear Reactor Program. The required tubing must be in annealed condition, featuring a 0.675 inch outer diameter and a minimum wall thickness of 0.065 inch, and can be provided in either seamless or welded metallic forms. All materials must strictly adhere to military specifications 715 and 706 for Copper-Nickel Alloy, with packaging requirements following MIL-STD-2073-1E. The contract is managed under NAICS code 331210 for the Department of Defense. Finished tubing is to be delivered FOB Origin to DLA Distribution, with the place of performance located in New Cumberland. The solicitation was posted on October 13, 2026, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Manufacturer of Metallic Tubes and Fittings (NSN 4710-01-515-6754)This subcontract involves the manufacture of 13 metallic tubes and fittings, specifically NSN 4710-01-515-6754, for prime contractors supporting the DLA Weapons Support ASC. The contractor is responsible for fabrication according to the DLA Master List of Technical and Quality Requirements and must perform bare item marking in accordance with RQ017. All delivered units must undergo inspection and acceptance to fulfill the contract requirements. The project is managed under NAICS code 331210 and will be performed in Cherry Point. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace-Grade Metal Tubing SupplyThis subcontract involves the supply of aerospace-grade raw metal tubing to prime contractors for DLA Weapons Support ASC projects, specifically supporting the manufacture of Bell Textron part number 205-060-581-001. The selected provider is responsible for sourcing high-quality alloys and ensuring full material traceability through the provision of comprehensive material certifications and Mill Test Reports. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OR OEM Division, with performance taking place in New Cumberland. Strict adherence to the Buy American Act and the Berry Amendment is required for all delivered stock. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026, falling under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Ga DLA Aviation At Warner Robins

Same awarding agency

Production of Aircraft Slats (LH7 and RH7)This subcontract involves the manufacture and qualification of aircraft slats for prime contractors supporting DLA Aviation projects under the Department of Defense. The selected provider is responsible for producing both First Articles and full-scale production units for Slat, Aircraft LH7 (P/N 4J10048-120G) and Slat, Aircraft RH7 (P/N 4J10048-119G). All work must strictly adhere to engineering drawings and Technical Order T.O. 1C-5M-4-5 F/24 I/35. To be eligible, contractors must possess aerospace-grade machining and fabrication equipment and maintain AS9100 or ISO 9001 certification. The project is categorized under NAICS code 336413 and will be performed in the 31088 zip code area. The response deadline for this opportunity is November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Slat, Aircraft LH7/RH7

Solicitation # FD20602600058REV02

The Department of Defense, through the Ga DLA Aviation At Warner Robins, is conducting market research via solicitation FD20602600058REV02 to identify capable sources for the production of C5 aircraft slats. The requirement specifically covers the Slat, Aircraft LH7 (NSN 1560007742115UC / P/N 4J10048-120G) and the Slat, Aircraft RH7 (NSN 1560007742114UC / P/N 4J10048-119G). The anticipated scope includes the delivery of first articles and production quantities across five option periods, with a total of 42 units planned. All production must adhere to Technical Order T.O. 1C-5M-4-5 F/24 I/35, and the contractor is responsible for providing all necessary materials, tools, and calibrated test equipment. Interested vendors must be registered in the Enhanced Joint Certification Program (EJCP) to access bidset documents and must possess or be able to obtain a Secret level security clearance. The government is seeking capability statements and RFI forms that detail the respondent's quality assurance processes, such as ISO 9001 or AS9100 certifications, and their socioeconomic status under NAICS code 336413. This sources-sought effort was posted on October 14, 2026, with a response deadline of November 13, 2026. Submissions should be directed to the primary point of contact, Danielle Rutland, or the secondary contact, Roberto Martinez-Perez.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Motional Transducer

Solicitation # FD20602600060

The Department of Defense, through the DLA Aviation Procurement Operations at Warner Robins, is conducting market research to identify qualified manufacturers for the production of a Motional Transducer, identified as NSN 6695-01-554-1937UC and Part Number 3M2227C. This engine accessory component is used for the C-5 aircraft to measure and report thrust reverser position. The government intends to procure these items using Other Than Full and Open Competition, as prescribed by FAR 6.302-1, meaning competition is limited to entities that satisfy specific Distribution Statements and Export Control Notices. Interested parties must demonstrate their expertise and capability by contacting Brooke Whitford via email no later than October 28, 2026. This announcement is a sources sought synopsis for informational purposes and does not constitute a formal solicitation or a request for proposal. No funds are provided for the preparation of responses, and the government is under no obligation to award a contract based on this notice.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Request for Interested Manufacturers UP CONVERTER/DOWN CONVERTER

Solicitation # SPRWA1-27-R-0001

The Department of Defense is conducting market research to identify capable sources for the production of Double Mixer Up Converters and Double Mixer Down Converters used in the AN/ALQ-161 Electronic Warfare System for B-1B aircraft. The requirement includes an estimated quantity of 54 Up Converters and 36 Down Converters. These items follow a successful redesign and First Article Testing completed in 2024. Due to the lack of government-owned manufacturing-level technical data, the government intends to award a sole source contract to the original equipment manufacturer, Spectrum Microwave, under FAR 6.302-1. Interested parties must submit their capabilities to the DLA Aviation at Warner Robins contracting office by October 23, 2026. This notice serves as a sources sought synopsis for informational purposes and is not a formal request for proposal.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

F-15 Variable Inlet Ramp (Diffuser), Left Hand

Solicitation # FD20602700050

The Department of Defense, through the DLA Aviation Procurement Operations at Warner Robins, is conducting market research to identify potential manufacturers for the F-15 Variable Inlet Ramp (Diffuser), Left Hand, identified by NSN 1560-01-621-1723FX. This specific component is critical for controlling airflow to enhance engine performance and is used exclusively on F-15 E and EX model aircraft. Due to a lack of government-owned technical data, drawings, or schematics, the government intends to award a sole-source contract to The Boeing Company, as they are currently the only known source with the necessary technical expertise and data to ensure equipment compatibility. While the government intends to proceed with Other Than Full and Open Competition, other interested parties may submit their capabilities and interest to the designated points of contact by October 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Request for Interested Manufacturers of NSN: 4820-01-554-6411UC, PN: 320522-17, Valve Assembly, Directional Pilot and Pressure Switch (DPV)

Solicitation # SPRWA1-6411

The Department of Defense, through the DLA Aviation at Warner Robins, is conducting market research to identify potential sources for the production and qualification of a Valve Assembly, Directional Pilot and Pressure Switch (DPV), identified by NSN 4820-01-554-6411UC and Part Number 320522-17. This component is used in the C-5 aircraft to convert electrical signals into pneumatic air signals to control the central drive unit. Due to the fact that Honeywell International Inc. owns the data rights and has licensed them to Ontic Engineering and Manufacturing, the government currently identifies Ontic as the only known source capable of meeting the technical requirements and maintaining engine warranties with General Electric. Consequently, the government intends to pursue this procurement using other than full and open competition. Interested parties must submit their capabilities to Brooke Whitford or Vanessa Moes by October 21, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Request for Interested Manufacturers of 6130-01-523-3338 Power Control Module (PCM) and 1095-01-523-5767 High Bandwidth Assembly (HBA) for the Bomb Release Unit (BRU)-57

Solicitation # SPRWA1-27-SSS_PCM_HBA

The Department of Defense is conducting market research to identify capable sources for the production and qualification of the Power Control Module (PCM) and High Bandwidth Assembly (HBA) used in the BRU-57/A Smart Bomb Rack for F-16 C/D aircraft. The PCM manages electrical power distribution, while the HBA facilitates high-speed data communication between the aircraft and smart weapons. Due to a lack of government-owned technical data and schematics, L3Harris is currently identified as the only source with the necessary expertise and data to ensure equipment compatibility. Consequently, the DLA Aviation at Warner Robins intends to award a sole source contract to L3Harris. Interested parties with the capability to meet these requirements must submit their interest to the primary point of contact by October 20, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Signal Data Converter (SDC) Supply for AN/APN-232 CARA SystemThe contract involves the supply of a single Signal Data Converter (NSN: 5895-01-567-7326, P/N: 8010000806-4) intended for integration into the AN/APN-232 CARA system used on F-16 aircraft. This equipment must meet F3I compliance standards and be accepted following military inspection to ensure it meets operational requirements. The procurement supports the Department of Defense through the Ga DLA Aviation office at Warner Robins, with the work being performed in Warner Robins as well. This subcontract falls under NAICS code 334511, which pertains to the manufacturing of electronic components. Although solicitation and set-aside details are not provided, the contract’s focus on delivering a high-precision military-grade data converter highlights its critical role in avionics systems. The contract supports ongoing efforts to maintain and upgrade the avionics capabilities of F-16 aircraft, ensuring compatibility and reliability under stringent defense standards.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS