Top

Request for Proposal SPRRA223R0068

Active

SPRRA223R00680003Federal

Response Deadline07/31/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

This contract pertains to a Request for Proposal (RFP) SPRRA223R0068 issued by the Defense Logistics Agency (DLA) Aviation at Huntsville under NAICS code 334412. The solicitation has undergone multiple amendments primarily focused on extending the proposal due dates, with the latest change setting the final submission deadline to July 31, 2026. The amendments also include adjustments to the Estimated Annual Demand (EAD) quantities for specific parts, as well as the removal of certain part numbers from the solicitation. These updates indicate an ongoing effort to refine requirements and timelines to accommodate changes in procurement planning. The solicitation is managed by DLA Aviation located at Redstone Arsenal, Alabama, and involves parts critical to the Department of Defense's aviation needs. The procurement process allows prospective contractors to submit proposals until mid-2026, providing ample time for their preparation in alignment with evolving needs. Key contacts for the solicitation are designated for primary and secondary communication, facilitating responsive engagement throughout the proposal period. Overall, the contract reflects a structured and dynamic procurement activity aimed at securing specific aviation components under adjusted timelines and updated demand forecasts.

General Info

DLA Aviation RFP for aviation parts, deadline July 31, 2026, with amended quantities and parts.

Agency

Department Of Defense → Al DLA Aviation At Huntsville

NAICS

334412 - Bare Printed Circuit Board Manufacturing View NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

2 updates

PhaseSolicitation

PostedJun 10

Solicitation

Amendment 0Jun 10

Contract was updated

Amendment 2Jun 10

Contract was updated

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 09:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

Contacts2 people available

OfficeREDSTONE ARSENAL, AL, 35898-7340, USA

Organization / Agency

Department Of Defense → Al DLA Aviation At Huntsville

Office AddressREDSTONE ARSENAL, AL, 35898-7340, USA

Contacts

Hecmari "Mari" Bretz

contact@example.gov

Becky Brady

contact@example.gov

Full Description

Amendment 0024 change proposal due date to 31 July 2026.

_______________________________________________________________________

Amendment 0023 change proposal due date to 30 April 2026.

_______________________________________________________________________

Amendment 0022 change proposal due date to 25 February 2026.

_______________________________________________________________________

Amendment 0021 change proposal due date to 31 October 2025 and update the Estimated Annual Demand quantities for the parts below:

PRON Nsn Part Solicited EADs Current EADs

D13F0246D1 1450014411625 13507200 62 47

D14F0078D1 6150015315487 13508084-4 20 68

D14F0087D1 5998014406581 13508050 100 98

_______________________________________________________________________

Amendment 0020 change proposal due date to 25 February 2025.

_______________________________________________________________________

Amendment 0019 is to remove the listed part numbers:

P/N:13508085-4, NSN:6150-01-531-5490, NOUN:Cable Assembly, Umbil, Signal LR, Qty:15

P/N:13508084-3, NSN:6150-01-531-5486, NOUN:Cable Assembly, Umbil, Power LL, Qty:20

P/N:13507915, NSN:5998-01-678-4764, NOUN:Circuit Card Assembly, Mic, Qty:11

_______________________________________________________________________

Amendment 0018 change proposal due date to 16 January 2025.

_______________________________________________________________________

Amendment 0017 change proposal due date to 12 December 2024.

_______________________________________________________________________

Amendment 0016 change proposal due date to 3 December 2024.

_______________________________________________________________________

Amendment 0015 change proposal due date to 14 November 2024.

_______________________________________________________________________

Amendment 0014 change proposal due date to 7 November 2024.

_______________________________________________________________________

Amendment 0013 change proposal due date to 31 October 2024.

_______________________________________________________________________

Amendment 0012 change proposal due date to 10 October 2024.

_______________________________________________________________________

Amendment 0011 change proposal due date to 3 October 2024.

_______________________________________________________________________

Amendment 0010 change proposal due date to 19 September 2024.

_______________________________________________________________________

Amendment 0009 change proposal due date to 29 August 2024.

_______________________________________________________________________

Amendment 0008 change proposal due date to 8 August 2024.

_______________________________________________________________________

Amendment 0007 change proposal due date to 9 July 2024.

_______________________________________________________________________

Amendment 0006 change proposal due date to 12 June 2024.

_______________________________________________________________________

THE PURPOSE OF AMENDMENT 0005 TO SOLICITIATION SPRRA223R0068 IS TO EXTEND THE PROPOSAL DUE DATE TO 15 MAY 2024.

Similar Contracts

NAICS: 334412

New

Federal

59--CIRCUIT CARD ASSEMBThis contract solicitation is for the procurement of one unit of a circuit card assembly with the National Stock Number 5998016305151. The item is to be delivered to DLA Distribution in location W1A8 within 694 days after order date. The approved source for this procurement is identified as 0GHS0 MT57M1131-2. The solicitation is issued as a Request for Quotation (RFQ), available exclusively online via a specified link, with no hard copies or related specifications, plans, or drawings provided. All responsible sources are invited to submit electronic quotes, which will be fairly considered if received on time. The solicitation is managed by the Defense Logistics Agency Land and Maritime under the Department of Defense, with the office located in Columbus, Ohio. The solicitation number is SPE7M126T143Z, posted on June 14, 2026, and responses must be submitted by June 25, 2026. The procurement falls under NAICS code 334412. Interested parties with questions are directed to contact the buyer via email provided in the solicitation documentation or through the official DIBBS platform. This procurement does not specify any set-aside type and is categorized as a combined type of contract.

DLA Land And Maritime

POSTED

DEADLINE

CIRCUIT CARD ASSEMBThis contract pertains to the repair of circuit card assemblies and outlines specific requirements for turnaround time, inspection, and acceptance. The repair turnaround time (RTAT) is measured from the physical receipt of the asset at the contractor’s facility, as documented in the commercial Asset Visibility system, to final government acceptance. The contractor must report all transactions promptly and meet the established RTAT for all assets, with a defined throughput constraint specifying the monthly number of units to be repaired. Pricing is tied to meeting these RTAT requirements, and any delays may result in negotiated adjustments. Assets must be received within 365 days of the contract award date unless otherwise agreed upon. Additional provisions include quality and inspection standards, safeguarding of sensitive items, adherence to Buy American and trade agreement requirements, and the use of specified payment and workflow systems. The contract also contains clauses related to equal opportunity, transportation of supplies by sea, security exclusions, and royalty information. The Department of Defense, through Navsup Weapon Systems Support, manages this contract with a solicitation deadline in mid-2026. The contractor’s compliance with these terms ensures timely repair and delivery of the specified components under government quality control and financial oversight.

Navsup Weapon Systems Support

POSTED

DEADLINE

VIBRATION ANALYZERThis contract pertains to the manufacture and quality assurance of a Vibration Analyzer as specified by the Department of Defense through DLA Mechanicsburg. It incorporates strict quality control requirements, including adherence to ISO-9001 standards and higher-level inspection criteria. The contract mandates identification marking per MIL-STD-130 and prohibits the use or contamination by metallic mercury due to its corrosive and toxic properties, specifying rigorous handling and testing measures if mercury is functionally required. Changes to design, materials, or part numbers require prior written approval by the contracting officer, with specific coding procedures for different types of changes. The responsibility for inspection rests with the contractor, though the government reserves the right to perform additional assessments to ensure compliance. The contract employs a Lowest Price Technically Acceptable evaluation approach and requires electronic submission of invoices and receiving reports via the Procurement Integrated Enterprise Environment. Packaging must comply with MIL-STD 2073 standards, and all contract-related documents or modifications become official upon issuance by the government through electronic or mail channels. Distributors are required to provide proof of authorization from the original manufacturer when submitting offers. Vendors are encouraged to register with government electronic commerce systems to facilitate communication and contract management. The contract includes detailed instructions for obtaining applicable documents and maintaining confidentiality according to distribution statements defined by OPNAVINST 5510.1. The solicitation deadline is July 13, 2026, and all procurement communications are directed through the designated point of contact at DLA Mechanicsburg.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

CIRCUIT CARD ASSEMBThis contract solicitation, issued by the Department of Defense through the NAVSUP Weapon Systems Support Mech office, pertains to the repair of CIRCUIT CARD ASSEMB components. It requires the contractor to provide firm-fixed-price quotes specifically for repair services, excluding test and evaluation-only pricing. The contractor must be an authorized repair source and comply with strict quality assurance standards, including adherence to MIL-STD packaging and government source inspection protocols. The repair turnaround time (RTAT) is set at 82 days from the physical receipt of assets, with penalties applied for delays unless excusable causes like government delays occur. The contract also mandates compliance with unique item identification (IUID) and cybersecurity maturity certification requirements, along with proper marking per MIL-STD-130. Submissions must include detailed pricing (repair unit price, total price, new unit price), RTAT commitments, capacity constraints if applicable, and supporting documentation such as CAGE codes for awarding and inspection facilities. The contract governs the inspection, testing, and acceptance of repaired items according to original manufacturer specifications and incorporates requirements related to changes in design or parts, which need prior government approval unless classified as minor part number changes. Delivery is FOB source with freight managed via Navy Commercial Asset Visibility systems. The solicitation specifies documentation acquisition protocols, including handling of classified or restricted materials, and requires offers to be submitted electronically to the designated contracting officer by the stated deadline.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

PRINTED CIRCUIT BOAThis contract, titled "PRINTED CIRCUIT BOA" and issued by the Naval Supply Weapon Systems Support office of the Department of Defense, focuses on the repair, overhaul, testing, and inspection of specific electronic printed circuit boards as identified by drawing and specification references. The contractor is responsible for all aspects of the repair process, including providing necessary facilities, labor, materials, and tooling, while adhering strictly to approved manuals and specifications. The government will not supply any equipment such as fixtures, jigs, or special tooling. Repairs must restore items to a Ready For Issue (RFI) condition, ensuring operational reliability according to contract standards. Detailed procedures govern handling of items that are Beyond Economical Repair (BER), Missing on Induction (MOI), or require Over and Above Repair (OAR), all requiring written concurrence from Defense Contract Management Agency (DCMA) and approval from the Procuring Contracting Officer (PCO) prior to proceeding. Key contract performance requirements include strict adherence to MIL-STD-130 markings, maintenance of quality management systems compatible with ISO 9001 or SAE AS9100 standards, and calibration systems meeting recognized programs such as ANSI/NCSL Z540.3. The contract sets forth turnaround times for repair measured from physical receipt to government acceptance, with mandatory transaction reporting via the Commercial Asset Visibility (CAV) system. The contractor must maintain configuration management and provide secure, enclosed storage for items awaiting and completed repairs. Pricing and reconciliation terms are based on meeting specified repair turnaround times, and any contract changes or manufacturing source alterations must receive government approval. The contract has a one-year induction period post-award and includes stringent controls over purchased materials and parts, emphasizing new and approved components unless otherwise authorized.

Navsup Weapon Systems Support

POSTED

5 days ago

DEADLINE

in 27 days

View Details