Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Request for Proposals for PON Network Equipment

Active
2026-GSCA-RFP-002State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Golden State Fiber is soliciting proposals for the supply of Passive Optical Network equipment through RFP 2026-GSCA-RFP-002, issued on July 17, 2026, with a firm deadline for submissions on August 20, 2026, at 6:59 a.m. Pacific Time. The procurement is a competitive, transparent process open to qualified vendors, with the potential to award contracts to one or more responders based on evaluation criteria detailed in the RFP. All submitted proposals will be made public after the close of the submission period, and participants are advised to review confidentiality guidelines carefully before submitting sensitive information. Questions must be submitted exclusively through the Procurement Portal’s Question and Answer feature, and all responses will be shared uniformly with applicants to ensure fairness. Proposals received after the deadline will not be considered, and submissions must be completed via the designated online portal. The solicitation is managed by the California Department of Finance and Administration, with the primary point of contact being Shayne Pope, Outside Plant Construction Management Lead, reachable at 209-300-4641 or spope@goldenstateconnect.org, and secondary support provided by Marc Rotteveel, Project Accountant, at 916-447-4806 or mrotteveel@rcrcnet.org. The contract is classified under a SLED government entity type, and while no NAICS code or set-aside designation is specified, the equipment will be deployed across California, with the issuing agency headquartered in Sacramento. Interested parties are directed to the portal link for all submission and communication needs, and compliance with procedural requirements is mandatory for consideration.

General Info

Golden State Fiber seeks PON equipment via RFP due August 20, 2026, via portal, with public evaluation and California-wide deployment.

Agency

California → Finance and AdministrationView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(4)

GSF_Initial_Fee_Schedule_and_Rules.docx

DOCX

Request for Proposals for PON Network Equipment.pdf

PDF

GSF_Estimated_Forecast_and_Cost_Template.xlsx

XLSX

Appendix_A_-_Overall_PON_Network_Intial_Design.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → Finance and Administration
Contacts2 people available
OfficeSacramento, CA, 95814, US
Organization / Agency
California → Finance and Administration
View Agency Profile
Office AddressSacramento, CA, 95814, US
Contacts
Shayne PopeOutside Plant Construction Management Lead
Marc RotteveelProject Accountant

Interested Companies (10)

Show more
North Sky Communications
Vancouver, WA
Adtran
Huntsville, AL

See All 10 Interested Companies

Start a free trial to view all interested companies, their contact details, and full contractor profiles.

Start Free Trial

Full Description

Show more
Golden State Fiber ("GSF") invites you to submit a proposal to provide Passive Optical Network ("PON") Network Equipment. This Request for Proposals ("RFP") outlines the requirements for your proposal. This RFP is a competitive proposal process whereby GSF may award contracts to one or more PON network system vendors. All proposals will be reviewed and scored according to the requirements outlined in this RFP. This is a public process designed to provide transparency into the contract process. Following the close of the proposal period, all proposals will be made public. Please carefully review the confidentiality provisions of this RFP and direct any questions to GSF in advance of submitting any documentation you consider to be confidential. Final proposals must be submitted through the Procurement Portal no later than Response Submission Time on Response Submission Date . Interested parties that do not meet the deadlines specified in this RFP will not be considered. Please direct all questions via the "Question and Answer" feature of the Procurement Portal. Answers to questions will be provided to all applicants. We look forward to receiving your response.

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
MOUNT, GIMBALThe contract pertains to the procurement of six MOUNT, GIMBAL units identified by NSN 5895-01-647-6415 and part number RF-5940-MT004 from L3HARRIS TECHNOLOGIES, INC., with delivery required within five days of shipment to the Franklin USARC facility in Franklin, Pennsylvania. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging must follow DLA-specific procurement guidelines and be palletized accordingly, with no tolerance for quantity variance. The items are designated as a critical application item and must not contain intentional mercury or mercury compounds except under specific exceptions for functional components such as batteries or sensors, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and acceptance occurs at the destination point. Shipping must utilize the fastest traceable means, excluding parcel post, and is FOB origin. The supplier must also comply with documentation requirements for source approval and handle covered defense information in accordance with applicable protocols. The original required delivery date is April 29, 2026, and the contract is issued under solicitation SPE4A7-26-T-536B with a North American Industry Classification System code of 334290.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334290
New
DIBBS
CASE, ELECTRONIC COMThis contract is for one unit of a commercial off-the-shelf electronic case, part number 4526411 with NSN 5895-01-700-0459, sourced from Teledyne Flir Unmanned Ground Systems, under solicitation SPE4A0-26-T-3385. The item must be delivered within five days of contract award to Fort Leonard Wood, Missouri, with FOB origin terms and zero variance in quantity. Inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA’s specific procurement packaging requirements, and the DLA Master List of Technical and Quality Requirements superseding any conflicting standards. The item is classified as a COTS product and subject to cybersecurity maturity model certification Level 2 self-assessment. The shipment must be sent via a traceable method, excluding parcel post, and directed to the specified freight address and mark-for location at Fort Leonard Wood. The shipment type is RDD with NMCS designation, and the required delivery date is April 24, 2026. The contract includes specific government use codes and identifiers, and the unit of issue is each (EA) as defined by DoD standards. The point of contact for inquiries is Justin Bryant-Kresser, and the solicitation response deadline is July 22, 2026, with the document posted on July 17, 2026. All terms are governed by the DLA acquisition framework and require strict adherence to labeling, delivery, and cybersecurity compliance protocols.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334290
New
Federal
MODEM,COMMUNICATIONThis contract pertains to the procurement of a MODEM, COMMUNICATION under solicitation SPRMM126QHD32, issued by the Defense Logistics Agency (DLA) Mechanicsburg through the SPRMM1 office. The solicitation has been extended to a response deadline of August 7, 2026, with a total quantity requirement of seven units. Award will be made using the Lowest Price Technically Acceptable (LPTA) evaluation method, ensuring that proposals meet all technical requirements at the lowest cost. The contractor must supply the item according to specified CAGE codes and reference numbers, with strict adherence to MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, categorized under specific change codes with documentation required for evaluation. The contractor is fully responsible for inspection and quality assurance throughout production and must maintain inspection records for 365 days after final delivery. All contractual documents are considered issued upon electronic transmission, and performance must occur at the specified production facility unless a formal, cost-covered change is approved. The contractor must be an authorized distributor of the original equipment manufacturer and provide proof of authorization with the offer. Technical data is not provided, and inspection of materials will occur at the source, with final acceptance at the designated location. Compliance with cybersecurity maturity model certification, Federal Acquisition Supply Chain Security Act prohibitions, and mandatory use of WAWF for electronic invoice and receiving report submission is required. Contractors must register for the PIEE EDA portal to access orders and updates, and are strongly encouraged to enroll in NAVSUP WSS notification services. Distribution of government-provided documents is governed by specific distribution statement codes, with controls on further dissemination based on sensitivity. Failure to comply with any requirement, including OEM disclosure, packaging, marking, or electronic submission protocols, may result in disqualification or non-acceptance of the offer.
SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

in 20 days
View Details
NAICS: 334290
New
Federal
PANEL,CONTROL, ELECT - RFPThe Government is seeking to acquire twenty-four PANEL, CONTROL, ELECT units, NSN 5895-01-721-1771 with part number 13748140, under a firm-fixed price single purchase contract for use on the IBAS Weapon System. This requirement is strictly limited to two sole-source manufacturers, THOMAS GLOBAL with CAGE code 6ZT04 and PALOMAR with CAGE code 1CWA3, due to insufficient technical data and lack of rights to reprocurement information from alternative sources. The production lead time is 135 days after contract award for all twenty-four units, with delivery required to Tobyhanna, PA 18466-5059. This acquisition is subject to strict export controls under the Arms Export Control Act and the Export Administration Act, prohibiting any release of technical data outside the United States without prior government approval. All offerors and their supply sources must hold an active United States/Canada Joint Certification Program certification to access controlled information, and delays in award will not be granted to accommodate incomplete certifications. Communication for solicitation requests must be directed exclusively via email to Cheyenne Wright at Cheyenne.Wright@dla.mil, including name, company name, CAGE code, and telephone number; no telephone inquiries will be accepted. Foreign firms must route requests through their respective embassies. While current efforts are underway to secure data rights that may enable future competition, this procurement remains restricted to the sole-source suppliers for now. The solicitation closes on July 10, 2026, and is posted under SPRRA2-26-R-0086 with NAICS code 334290 under the Department of Defense, Office of DLA Aviation at Redstone Arsenal, Alabama.
Al DLA Aviation At Huntsville

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334290
New
Federal
Sources Sought Kingfisher Radio Alarm TransmitterThe Naval Facilities Engineering Systems Command, Pacific is seeking to identify alternative sources capable of supplying a fire alarm radio transmitter that meets the exact performance specifications of the Kingfisher KFRA-C Emergency Alarm Receiver system currently in use at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam. The required device must be listed or approved by a Nationally Recognized Testing Laboratory recognized by OSHA and must operate seamlessly with the existing Factory Mutual Laboratories Approved Kingfisher receiver. It must also comply with the narrowband radio communication standards outlined in the National Telecommunications and Information Administration’s Federal Frequency Management manual. This notice is strictly for market research and does not constitute a solicitation for bids or proposals. Respondents must submit comprehensive technical data demonstrating full compatibility with the existing system; company brochures will not be accepted. Any submissions must be received electronically by Annette Tijerina no later than 30 July 2026 at 2:00 p.m. H.S.T., and all information provided becomes the property of the U.S. Government. Incomplete or vague responses will be disregarded, and submissions after the deadline will not be considered. This action is taken under FAR 15.201(e), and no binding contract will result from responses to this notice.
Navfacsyscom Pacific

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334290
New
DIBBS
TELEPHONE, SECURE UNThe contract requires the procurement of 45 units of a secure telephone, NSN 5810-20-010-8673, under solicitation SPE4A7-26-T-576F, with delivery due 162 days after contract award to the DDSP New Cumberland facility in Pennsylvania. All items must be furnished FOB origin, inspected and accepted at destination, with zero tolerance for quantity variance. Packaging must comply with MIL-STD-2073-1E, including mercury-free certified materials per NAVSEA 5100-003D, and palletization must follow DLA’s RP001 packaging requirements. Marking and labeling are governed by MIL-STD-129, with no special marking required beyond the NSN and purchase request number. Sampling for acceptance shall adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise specified, and attributes not otherwise classified are treated as major. Mercury or mercury-containing compounds are prohibited in all hardware and packaging except for specific functional applications such as batteries, fluorescent lamps, sensors, or weapon systems, and any portable mercury-containing devices must be shockproof with dual containment. The contractor must certify all packaging as mercury-free and comply with hazardous material labeling under 252.223-7001 and 252.223-3, including submission of Safety Data Sheets prior to award. Cybersecurity compliance is mandatory with implementation of NIST SP 800-171 controls to protect covered defense information, mandatory reporting of cyber incidents within 72 hours, and submission of a self-assessment per 252.240-7997. The contractor is also prohibited from using telecommunications equipment from designated foreign vendors under 252.204-7018. All ocean shipments require use of U.S.-flag vessels under 252.247-7023, with exceptions requiring prior approval. The contractor must affirm representations regarding small business status, UEI, and CAGE code, and ensure compliance with employment eligibility verification, equal opportunity, trafficking in persons, and whistleblower protection clauses. Payment must be processed via WAWF using the specified invoice types, and all submissions must be made electronically through DIBBS by the deadline of July 24, 2026
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
DIVIDER, POWER, RADIOThe contract pertains to the procurement of a Divider, Power, Radio, identified by NSN 5895-01-731-1364 and part number APD3393, with a quantity of three units to be delivered within 247 days from the contract award date. The item is classified as a commercial off-the-shelf (COTS) product and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury or mercury-containing compounds are strictly prohibited in the product, its packaging, preservation, and marking, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with preservation method 41, dry conditioning, and use of EA wrap material; marking follows MIL-STD-129 with no special marking code required, and palletization adheres to DLA packaging standards. No mercury is permitted in preservation or packaging processes. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit price is $3.00 per unit, with zero variance allowed in quantity. The contract was issued under solicitation SPE4A7-26-T-578L, with a response deadline of July 24, 2026, and the required ship date is March 29, 2027. All transportation and shipping details are governed by DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
COUPLER, DIGITAL DATAThe contract is for the procurement of 15 units of a digital data coupler, identified by NSN 5895-01-171-3747, under solicitation SPE4A7-26-T-578T, with a response deadline of July 24, 2026. The item is classified as export-controlled technical data subject to either ITAR or EAR, with strict compliance required under DFARS 252.225-7048; disclosure to foreign persons, including foreign nationals within the United States, is prohibited without prior government authorization. Access to the controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by DLA. Delivery is required 350 days after receipt of order, with FOB Origin terms and delivery destined to DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must conform to MIL-STD-2073-1E using clean and dry preservation methods, with no wrapping or cushioning materials, and must be palletized per RP001 requirements. Marking and labeling must comply with MIL-STD-129, including UCC/SCS-128 barcodes and Data Matrix symbols, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200 or other applicable statutes, with hazard warning labels requiring prior government approval. Inspection and acceptance occur at the destination under MIL-STD-1916 using zero-based sampling plans with strict AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor defects. The contract includes mandatory clauses addressing employment non-discrimination, combating trafficking, electronic invoicing via WAWF, safeguarding covered defense information, cybersecurity compliance per NIST SP 800-171, prohibitions on hexavalent chromium and covered defense telecommunications equipment, whistleblower rights, and restrictions on mandatory arbitration. Subcontracting for commercial products is governed by DFARS clauses with specific deviations. Offerors must maintain a current UEI and CAGE code, provide accurate socioeconomic status representations, and comply with all WAWF invoicing requirements. Pricing details are not provided in the solicitation, and the contract type remains unspecified, though it appears to fall under automated simplified acquisition procedures. All proposals must be
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details