Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RESIN, RESTORATIVE, DENT

Active
SPE2DH-26-T-6788Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the DLA Troop Support Medical Supply Chain, is a Request for Quotations for the procurement of dental restorative resin. The required item is a light-cure universal bonding agent supplied in an L-pop unit dose delivery system, intended for use with composite restorative materials. The unit of issue is one package containing 100 units, with a required delivery timeline of five days after receipt of order. The product must be stored at room temperature between 36 and 77 degrees Fahrenheit and carries a non-extendable shelf life of 36 months. The contract mandates strict adherence to Medical Marking Standard No. 1 and DLA packaging requirements. Because the material is classified as hazardous, the successful contractor must provide a current Material Safety Data Sheet and ensure all labeling and packaging comply with 49 CFR, 29 CFR, and the Hazard Communication Standard. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment, as well as compliance with the Buy American Act and various DFARS cybersecurity and safeguarding regulations.

General Info

DLA RFQ for dental restorative resin bonding agents with five-day delivery requirement.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

PO BOX 7003, PASCAGOULA, MS, 39567, USA

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-6788 Request for Quotations

PDF•20 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUSA
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESIN,RESTORATIVE,DENTAL
RESIN, RESTORATIVE, DENTAL
ADHESIVE, DENTAL, LIGHT CURE, UNIVERSAL BONDING AGENT,
UNIT DOSE, FOR USE WITH COMPOSITE RESTORATIVE MATERIALS.
SUPPLIED IN L-POP UNIT DOES DELIVERY SYSTEM. ROOM TEMPERATURE
IS RECOMMENDED 36 TO 77 DEGREES FAHRENHEIT
UNIT OF ISSUE: PACKAGE/100 EACH
..
RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
..
.
HAZARDOUS MATERIALS REQUIREMENTS.
.
MATERIAL SAFETY DATA SHEET (MSDS).
.
. A CURRENT MSDS SHALL BE PROVIDED FOR THIS
ITEM. DLA'S DOD HMIRS FOCAL POINT (VBA) HAS
ESTABLISHED AN ELECTRONIC MAILBOX TO WHICH
ONE CAN TRANSMIT THE MSDS, TOGETHER WITH THE
COVER SHEET (P-75) WHOSE CONTENTS ARE TO
REFLECT LOGISTICS INFORMATION PROPER TO THE
MSDS ASSOCIATED WITH THE AWARDED CONTRACT AND
NSN. THE ELECTRONIC MAILBOX ADDRESS IS
DLA.MSDS@DLA.MIL.
.
. IN ADDITION, A COPY OF THE MSDS SHALL
ACCOMPANY EACH SHIPMENT OF THIS ITEM.
.
PACKAGING.
.
. PACKAGING FOR HAZARDOUS MATERIALS SHALL
SPE2DH-26-T-6788
SECTION B
COMPLY WITH APPLICABLE REGULATIONS, I.E.,
49 CFR, INTERNATIONAL CIVIL AVIATION
ORGANIZATION (ICAO) TECHNICAL NSN/Part Number: 6520-01-738-3169 Quantity: 1 PG Purchase Request: 7018257297QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339114
New
DIBBS
Supply of High-Speed Tungsten-Carbide Dental Surgery BursThis subcontract involves the supply of high-speed friction-grip tungsten-carbide rotary instruments to prime contractors supporting the Department of Defense Medical Supply Chain FSH. The scope of work focuses on the manufacture of pear-shaped plain crosscut burs that adhere to ISO 500 314 233 006 009 standards. Deliverables consist of one package containing 100 dental surgery burs, with packaging and labeling required to be compliant with MIL-STD-129 and Medical Marking Standard No. 1. The contract is categorized under NAICS code 339114 and is associated with a performance location in Pascagoula, Mississippi. The solicitation was posted on September 14, 2026, with a response deadline of September 21, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Disposable Dental Evacuator Tip ManufacturingThis subcontract involves the manufacturing of disposable dental evacuator tips for prime contractors supporting Department of Defense supply contracts through the Medical Supply Chain FSH. The producer must utilize medical-grade opaque plastic and injection molding equipment to create tips that meet the specific technical and quality requirements of NSN 6520-01-227-7026 and the DLA Master List. The project falls under NAICS code 339114 and is designated for performance at Camp Lejeune, North Carolina. Interested parties must adhere to the response deadline of September 21, 2026, to provide finished disposable dental evacuator tips that comply with all agency standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Manufacturer of NSN 6520-01-532-2143This subcontract involves the manufacture of medical end-item NSN 6520-01-532-2143 for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The production must adhere to the DLA Master List of Technical and Quality Requirements and Medical Marking Standard No. 1, utilizing medical-grade equipment and additive manufacturing or 3D printing where appropriate. The project is managed by the Department of Defense under the Medical Supply Chain FSH, with performance taking place in Enid, Oklahoma. The opportunity is categorized under NAICS code 339114 and was posted on September 14, 2026, with a response deadline of September 21, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Dental Acrylic Resin Kit SupplierThis subcontract opportunity is for the supply of self-curing acrylic resin kits used for jet denture repair, supporting prime contractors under the Department of Defense Medical Supply Chain. The required kits must consist of pink acrylic resin in 1LB packages, each containing a 454g powder component and a 236ml liquid component, packaged in sealed unit containers and commercial exterior shipping containers according to DLA Medical Supply Chain specifications. The contract is managed by the Medical Supply Chain FSH with a performance location in San Antonio, Texas. Interested parties must respond by September 21, 2026, to provide one complete Dental Acrylic Resin Kit under NAICS code 339114.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Supply of Endodontic Gutta Percha PointsThis subcontract with the Department of Defense Medical Supply Chain FSH involves the supply of endodontic gutta percha points for prime contractors. The specific requirements call for Size 50, .04 Taper, 60s points that comply with NSN 015322114 and FSC 6520, as detailed in CLIN 0001. Additive manufacturing processes are prohibited unless explicit authorization is granted. The contract falls under NAICS code 339114 and is to be performed in Enid, Oklahoma. The solicitation was posted on September 14, 2026, with a response deadline of September 21, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Dental Restorative Resin SupplierThis subcontract for the Medical Supply Chain FSH under the Department of Defense involves the procurement of dental restorative resin for prime contractors. The supplier must provide light-cure universal bonding agents in unit dose packaging, specifically Solventum Health P/N 41298 or an approved equivalent, delivered in packages of 100 units. The contract requires strict adherence to FDA Regulation 72-3690 Class II, including 510(k) clearance and Good Manufacturing Practices, with all materials packaged according to Medical Marking Standard No. 1. Performance will take place in Pascagoula, Mississippi, under NAICS code 339114.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
RESIN, ACRYLIC, DENTAL
Solicitation # SPE2DH-26-T-6749
Solicitation SPE2DH-26-T-6749, issued by the DLA Troop Support Medical Supply Chain FSH, seeks quotes for one kit of self-curing pink acrylic dental resin for denture repair (NSN 6520-01-695-6659). Each kit must contain 454 grams of powder and 236 milliliters of liquid. The requirement falls under NAICS 339114, with a delivery timeline of five days after order. Delivery is set as FOB Destination to the Kelly CSDC AFMEDCOM facility in San Antonio, Texas. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and requires packaging to comply with MIL-STD-2073-1E and RP001 for palletization. Because the material is hazardous, the contractor must provide a current Safety Data Sheet with each shipment and ensure all labeling complies with 49 CFR, 29 CFR, and ICAO or IMDG regulations. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and specific cybersecurity requirements for safeguarding covered defense information.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTS, EN
Solicitation # SPE2DH-26-T-6785
Solicitation SPE2DH-26-T-6785, issued by the DLA Troop Support Medical Supply Chain, seeks quotes for two boxes of ProTaper Ultimate Conform Fit Gutta-Percha Points, size F2, with each box containing 60 units. The items are identified by NSN 6520-01-717-7581. Delivery is required within five days after receipt of order to a consignee in Gulfport, Mississippi, with an original required delivery date of September 16, 2026. The supplies must have a 24-month shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery. Packaging must adhere to DLA requirements (RP001) and be secured in sealed unit containers. Labeling must comply with Medical Marking Standard No. 1 and the latest revision of MMS1B, including the manufacture date, expiration or retest date, and the contract or lot number. Inspection and acceptance will occur at the destination under FAR 52.246-2. The contract incorporates various federal regulations, including the Buy American and Balance of Payments Program (DFARS 252.225-7001) and cybersecurity standards for safeguarding covered defense information (DFARS 252.204-7012). Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotes are to be submitted via the DIBBS portal by September 21, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
FORCEPS, DRESSING
Solicitation # SPE2DH-26-T-6789
Solicitation SPE2DH-26-T-6789 is a fixed-price request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of sterile, disposable Meriam dressing forceps. The required items are angled with serrated tips, measuring 6.0 inches in length and 0.5 inches in width, and are specifically designed for oral procedures. The procurement consists of two line items: one unit for CLIN 0001 and three units for CLIN 0002 (NSN 6520-01-700-7985). Delivery is required within five days after receipt of order, with the place of performance and delivery specified as the USS MINNESOTA SSN 783. The contract mandates strict adherence to Medical Marking Standard No. 1 and DLA packaging requirement RP001, requiring each unit to be in a sealed container within commercial exterior shipping containers. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS system by September 21, 2026, and must comply with NAICS code 339114, the Buy American Act, and the Berry Amendment. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with NIST SP 800-171 and DFARS cybersecurity standards for safeguarding covered defense information.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
TIP, EVACUATOR, DENTAL
Solicitation # SPE2DH-26-T-6790
Solicitation SPE2DH-26-T-6790, issued by the DLA Troop Support Medical Supply Chain, seeks the procurement of 16 packages of disposable dental evacuator tips. Each package must contain 50 opaque plastic tips designed for oral cavity use, identified by NSN 6520-01-227-7026. The items are to be delivered to Camp Lejeune, North Carolina, via the fastest traceable means, with an original required delivery date of September 16, 2026. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The procurement is governed by NAICS code 339114 and requires compliance with the Buy American Act, the Berry Amendment, and DLA packaging requirements under RP001 and MIL-STD-129. Bidders must submit quotes through the DIBBS system by September 21, 2026, and are required to specify the source and part number being supplied. Administrative requirements include the use of Wide Area WorkFlow for electronic invoicing and adherence to various FAR and DFARS clauses regarding trafficking in persons, sustainable products, and the safeguarding of covered defense information.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
CAP KIT
Solicitation # SPE2DH-26-T-6779
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
FILTER, VACUUM, CLEANER
Solicitation # SPE2DH-26-T-6766
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339112
New
DIBBS
Supply of Fluid Solidification System BottlesThis subcontract involves the supply of Fluid Solidification System bottles with screw top caps for prime contractors supporting DLA Troop Support Medical Supply Chain contracts. The provided end-items must adhere to NSN 6530015301440 specifications, follow Medical Marking Standard No. 1, and be packaged according to DLA RP001. The items are to be delivered in sealed unit containers within commercial exterior shipping containers, with each case containing 64 bottles. Managed by the Department of Defense under the Medical Supply Chain FSH, the contract falls under NAICS code 339112. The place of performance is located at FPO 09566-4008. The solicitation was posted on September 14, 2026, with a response deadline of September 21, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Waxed Dental Floss SupplierThis subcontract involves the supply of waxed dental floss for prime contractors supporting the Medical Supply Chain (FSH) under the Department of Defense. The supplier must provide dental floss that meets the specific requirements for NSN 013914952, with the product delivered in packages of 72 units. Performance will take place at Camp Lejeune. To be eligible, the supplier must maintain an active SAM registration and ensure full compliance with FAR 52.204-24. Additionally, the contractor is responsible for submitting source and part number data or comprehensive data packages for any alternate parts to be evaluated by the Engineering Support Activity. The response deadline for this opportunity is September 21, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Supply of Nursing Bottle Nipples (NSN 6530011536305)This subcontract involves the manufacture or sourcing of 3,000 nursing bottle nipples for prime contractors supporting the Department of Defense Medical Supply Chain. All products must adhere to technical data for NSN 6530011536305 and be produced using medical-grade or food-grade silicone or rubber. The provider must comply with the DLA Master List of Technical and Quality Requirements RA001 and DLA Packaging Requirements RP001. Deliveries are to be made to designated government facilities, with the place of performance located at APO 09227.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488510
New
DIBBS
Medical Grade Packaging and Traceable Shipping ServicesThis subcontract for Medical Grade Packaging and Traceable Shipping Services supports DLA Troop Support medical supply chain projects. The contractor is responsible for specialized packaging of items according to ASTM D3951 and RP001 standards, ensuring all marking and labeling adhere to Medical Marking Standard No. 1. The scope includes the use of export-grade exterior shipping containers and RP001 compliant palletization to facilitate the delivery of goods. The contractor must coordinate traceable shipping to various destination points in Germany, with delivery terms set as FOB Destination. Performance of these services will take place at Fort Bliss, Texas. This opportunity is managed by the Department of Defense under NAICS code 488510, with a response deadline of September 21, 2026.
Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Supply of Hypodermic Disposal ContainersThis subcontract involves the supply of five packages of hypodermic disposal containers for prime contractors supporting Department of Defense medical supply chain projects. The containers must be manufactured or sourced using medical-grade plastics and strictly adhere to NSN 6530-01-619-5671 and the DLA Master List of Technical and Quality Requirements. Performance will take place at Fort Bliss, Texas, under NAICS code 339113. The provider must ensure full compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 security standards. The solicitation was posted on September 14, 2026, with a response deadline of September 21, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Manufacture and Supply of Sterile Ophthalmology Surgical DrapesThis subcontract involves the manufacture and supply of sterile, disposable ophthalmology surgical drapes for prime contractors supporting DLA Troop Support medical supply contracts. The drapes must feature a specific adhesive area measuring 3-7/8 inches by 4-7/8 inches and be individually sealed in polyethylene envelopes, with each package containing 10 units. The manufacturer is required to maintain full FDA medical device compliance and ensure all products are sterilized according to Medical Marking Standard No. 1. This opportunity is managed by the Department of Defense Medical Supply Chain and is categorized under NAICS code 339113, with performance taking place at FPO 09566-4008.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Supply of Water Sampling Test Kits (NSN 6630013628299)This subcontract involves the supply of specialized water sampling test kits, identified by NSN 6630013628299, for prime contractors supporting Medical Supply Chain FSH projects under the Department of Defense. The kits must adhere to ANSI X12 unit of issue standards and meet specific performance indicators for Total Coliform detection, where a yellow color change signifies a positive result. The requirement is for a quantity of 1,000 packages delivered FOB Destination. This opportunity falls under NAICS code 423450 and was posted on September 14, 2026, with a response deadline of September 21, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Surgical Instrument and Dressing Table SupplierThis subcontract with the Department of Defense Medical Supply Chain FSH involves the manufacture and supply of 1,000 surgical instrument and dressing tables. The supplier is responsible for sourcing or producing tables that adhere to NSN 6530-00-709-3975 specifications using medical-grade stainless steel. All units must undergo and pass an Engineering Support Activity evaluation to ensure quality and compliance. The contract requires commercial packaging, with each table individually sealed in protective containers to prevent transit damage. Performance will take place in San Antonio, Texas, under NAICS code 339112. The solicitation was posted on September 14, 2026, with a response deadline of September 21, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Physical Therapy Exercise Band SupplyThis subcontract with the Department of Defense Medical Supply Chain FSH involves the supply of 22,000 rolls of physical therapy exercise bands for prime contractors delivering DLA supply contracts. The items must strictly adhere to NSN 6530-01-651-8749 specifications, with labeling following Medical Marking Standard No. 1 and 1A and packaging complying with ASTM D3951 and RP001. The contract requires full compliance with the Buy American and Balance of Payments Program. Performance will take place at Fort Leonard Wood, and the procurement falls under NAICS code 423450.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 313320
New
DIBBS
Tactical Fabric and MOLLE Webbing SupplyThis subcontract, titled Tactical Fabric and MOLLE Webbing Supply, involves the sourcing and delivery of raw materials for prime contractors fulfilling DLA supply contracts. The scope of work focuses on providing Mil-Spec nylon webbing and high-denier tactical fabrics, including Cordura, specifically required for the manufacture of NSN 015157651. All materials must adhere to strict technical requirements to ensure full MOLLE compatibility, with deliveries consisting of bulk rolls of fabric and webbing. Managed by the Department of Defense under the Medical Supply Chain FSH, the contract falls under NAICS code 313320. The place of performance is located in Richmond, Virginia. Interested parties must note the response deadline of September 21, 2026, following the posting date of September 14, 2026.
Fabric Coating Mills

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
MOLLE Compatible Gear ManufacturingThis subcontract involves the manufacture and supply of finished MOLLE compatible gear, identified by NSN 015157651, for prime contractors fulfilling DLA supply contracts. The production process requires the use of industrial-grade fabrics and heavy-duty sewing machinery to integrate standard nylon webbing and attachment points. All deliverables must strictly adhere to RP001 packaging and RQ011 identification standards. The contract is managed by the Department of Defense under the Medical Supply Chain FSH, with performance taking place in Richmond, Virginia. It falls under NAICS code 339113 and was posted on September 14, 2026, with a response deadline of September 21, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS