Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RESISTOR, FIXED, FILM

Active
SPE7M5-26-T-369DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a fixed film resistor with the NSN 5905011801132, identified as a commercial item under FAR 11.001 and subject to full and open competition. The item must comply with MIL-PRF-39017H revision H dated December 4, 2024, and is listed on a Qualified Products List or Qualified Manufacturers List, requiring adherence to specified qualification criteria. Environmental restrictions prohibit the use of any Class I ozone-depleting substances in design, manufacturing, or testing unless written approval is obtained from the Contracting Officer, and mercury or mercury-containing compounds are strictly banned from intentional addition or direct contact with the product, except in narrowly defined exceptions such as specialized batteries, instrumentation, or chemical reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and include a secondary containment barrier as specified in NAVSEA 5100-003D. The resistor must be marked in accordance with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead content identification, requiring specific lead-free or leaded component markings on each unit package in compliance with established placement guidelines. Packaging must conform to MIL-STD-2073-1E with preservative methods, unit packaging details, and internal container specifications outlined. Delivery is required within 140 days FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. The total quantity is 424 units at a unit price of $7017437710, with the final delivery target set for March 10, 2027. The item is classified as a critical application component, and all technical and quality requirements referenced in the DLA Master List govern performance, with the revision in effect on the solicitation issue date controlling compliance. All shipments must be addressed to DLA Distribution San Diego, and transportation protocols follow DLAD procedural notes C19 and C20.

General Info

Procure 424 MIL-PRF-39017H resistors, lead-free, mercury-free, FOB origin, deliver by March 10, 2027, $7.017B unit price.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-369D for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Jeanette Heisey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR,FIXED,FILM
RESISTOR<(>,<)> FIXED<(>,<)> FILM
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
FULL AND OPEN COMPETITION APPLIES.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
SPE7M5-26-T-369D
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-39017H REVISION NR H DTD 12/04/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017437710 0001 EA 424.000
NSN/MATERIAL:5905011801132
DELIVERY (IN DAYS):0140
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:005 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BS OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of
SPE7M5-26-T-369D
SECTION B
PR: 7017437710 PRLI: 0001 CONT’D
IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:01/05/2027 Original Required Delivery Date:03/10/2027
SPE7M5-26-T-369D NSN/Part Number: 5905-01-180-1132 Quantity: 424 EA Purchase Request: 7017437710QTY: 424 Delivery: 140 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M2-26-T-6013
This contract specifies the procurement of a fixed film resistor identified by NSN 5905002322946, with a requirement for 204 units to be delivered within 161 days from the contract award date, with delivery occurring FOB origin. The item is classified as a commercial item and is subject to stringent technical and quality standards outlined in MIL-PRF-55182K(Sup 1) and MIL-PRF-55182/3T, with specific part numbers and revision levels mandated. The manufacturer must be listed on the Qualified Products List at the time of contract award, and all components must comply with IPC/JEDEC J-STD-609 requirements for lead finish marking on individual unit packages. The resistor must be free from mercury and any mercury-containing compounds, except for specific exempted applications such as certain sensors or instrument components approved by NAVSEA. Ozone-depleting substances are strictly prohibited in any phase of design, manufacturing, or cleaning unless prior written approval from the contracting officer is obtained. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with additional ESD and EMI protection required under MIL-PRF-81705, including specific barrier materials from qualified manufacturers listed on QPL-81705. ESD-sensitive components must be handled and packaged at approved workstations, with cushioning and containment methods preventing damage to leads and terminals. Preservation and packaging methods must also prohibit mercury or mercury compounds entirely. All unit packages must include proper marking per the specified standards, and delivery must be made to the designated DLA Distribution location at Robins Air Force Base, Georgia, with a required ship date of January 26, 2027, and original delivery deadline of March 27, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, VARIABLE,
Solicitation # SPE7M5-26-T-369E
This contract pertains to the procurement of a variable ceramic capacitor identified by NSN 5910-01-057-0969 and part number CV32D350, manufactured in accordance with MIL-PRF-81H Revision H dated June 3, 2025. The item is classified as a critical application component and must comply with the Qualified Products List or Qualified Manufacturers List. Strict adherence to DLA packaging and quality requirements is mandated, including inspection and acceptance at destination, preservation and packaging per MIL-DTL-39028 and MIL-STD-2073-1E, and marking in compliance with MIL-STD-129. Lead finish must be marked per IPC/JEDEC J-STD-609, and no mercury or mercury-containing compounds may be intentionally introduced except under specific exceptions for batteries, lighting, sensors, weapon systems, or Navsea-approved reagents. Portable devices containing mercury must have shockproof construction and a secondary containment barrier. The use of Class I ozone-depleting substances is prohibited unless explicitly approved in writing by the contracting officer. The contract specifies a firm fixed price of $53.00 per unit for a total quantity of 53 units, with delivery required FOB origin within 154 days from the contract date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is January 6, 2027, with a need ship date of January 19, 2027. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under solicitation number SPE7M5-26-T-369E.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, ADJUSTABLE
Solicitation # SPE7M5-26-T-368J
The contract is for the procurement of two adjustable resistors with NSN 5905-00-107-7735 under solicitation SPE7M5-26-T-368J, issued by the Department of Defense’s Active Devices Division. The requirement is for delivery within 20 days after award, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. The NAICS code 334416 indicates this falls under electronic component manufacturing. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates compliance with DLA packaging requirements and physical identification standards for bare items. An alternate offeror must submit a complete data package covering both the approved and alternate parts. The place of performance is FPO with ZIP 96661-4107, and point of contact is Jeanette Heisey, reachable via email and phone provided. Government identification must be removed from non-accepted supplies per contract terms.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-26-T-369Q
This contract is for the procurement of 93 units of a fixed film resistor with NSN 5905-01-245-3359 and part number SPE7M5-26-T-369Q, governed by military specification MIL-PRF-39017H Revision H dated December 4, 2024. The item is subject to strict quality and technical requirements as defined in the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date. The resistor must adhere to prohibitions on ozone-depleting substances in any manufacturing or cleaning process unless explicitly approved in writing by the Contracting Officer, and mercury or mercury-containing compounds are strictly banned from direct contact with the item, except in specified functional applications like batteries or calibrated instruments, which must also meet shock-proof and secondary containment standards per NAVSEA 5100-003D. As a qualified product list item, only approved manufacturers may supply it, and all packaging must conform to MIL-STD-2073-1E with labeling per MIL-STD-129, including special marking code ZZ for unique requirements. Each unit pack must carry lead content identification per IPC/JEDEC J-STD-609, with markings applied consistently and in accordance with industry standards. Delivery is FOB origin within 140 days, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. The items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 5, 2027, and original delivery deadline of December 29, 2026. The contract specifies the unit of issue as each, with a total price of $93.00 at $1.00 per unit.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR ASSORTMEN
Solicitation # SPE7M0-26-T-8858
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELE
Solicitation # SPE7M5-26-T-368T
This contract is for the procurement of fixed electrolytic capacitors under solicitation SPE7M5-26-T-368T, with a total quantity of 648 units at a unit price of $648.00, resulting in a total contract value of $419,104. The items are specified by part numbers 101-1573-02 and 101243U040BF2A from Cornell-Dubilier Marketing Inc., and 77C717442P11 from Lockheed Martin Corporation, all designated as critical application items. The capacitors must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stated. Attributes are classified with corresponding verification levels and AQLs, and unlabeled features default to major. The contractor must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the application of lead-free or lead-containing status labels per IPC/JEDEC J-STD-609 on every unit package. The delivery is FOB origin with a 268-day delivery window and a required ship date of May 13, 2027, to be received at the DLA Distribution San Joaquin warehouse in Tracy, California. Inspection and acceptance occur at destination, with no quantity variance permitted. Hazardous material shipping must follow DLAD Proc Note C19, and all packaging must include special marking code ZZ. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 334416, and is managed by the Department of Defense’s Active Devices Division, with Joel Simpson as the point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONW
Solicitation # SPE7M2-26-T-6034
This contract specifies the procurement of a nonwire wound, nonprecision variable resistor with the NSN 5905-01-207-6436 and part number RJR24FW102R, governed by military specifications MIL-PRF-39035/2H and MIL-PRF-39035F, both dated December 8, 2023. The item is listed on a Qualified Products List or Qualified Manufacturers List, requiring compliance with approved manufacturing sources. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instrumentation, weapon systems, or approved chemical reagents; portable devices containing mercury must be shockproof with secondary containment as per NAVSEA 5100-003D. The resistor is designated a critical application item requiring strict adherence to configuration management and engineering change procedures. Packaging must comply with MIL-STD-2073-1E, and marking must follow MIL-STD-129 with special code ZZ for additional requirements. Lead finish must be marked per IPC/JEDEC J-STD-609 on each unit package, with clear attribution to lead content status. The contract calls for 233 units delivered FOB origin within 26 days, with zero variance in quantity, inspected and accepted at destination. The delivery address is DLA Distribution San Diego, with a required ship date of September 13, 2026, and original delivery target of March 27, 2027. The procurement is under solicitation SPE7M2-26-T-6034, managed by the Department of Defense’s Nuclear Reactor Program, with primary point of contact David Larsen.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
Federal
TRANSFORMER,POWER AUTOTRANSFORMER
Solicitation # CM26161005
The contract solicits potential sources to manufacture the power autotransformer with NSN 5950-00-620-2911, currently supplied by three approved vendors: Superior Electric Holding Group LLC, Staco Energy Products Co, and OECO, LLC, each with specified part numbers and CAGE codes. The acquisition is classified under AMC "1C," indicating it is eligible for competitive acquisition for subsequent procurements while requiring engineering source approval due to proprietary design knowledge, manufacturing expertise, and technical data held exclusively by the approved sources. This designation means any new supplier must fully qualify through the DLA Weapons Support Alternate Offer/Source Approval Request (SAR) program by demonstrating their product meets or exceeds the quality and performance of the existing items, including submitting comprehensive technical documentation for government review and approval. The solicitation is open until August 13, 2026, and responses must be submitted directly to Contract Specialist Santiago Diaz Capurro, who oversees procurement for the FMS Tactical LTC Team at DLA Land and Maritime in Columbus, Ohio. Interested parties must align with the NAICS code 334416 and follow the official SAR process outlined on the DLA Weapons Support website to be considered for future approval as an alternate source.
DLA Land And Maritime

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334416
New
Federal
RESISTOR,FIXED,FILM
Solicitation # N0010426QEC62
The contract pertains to the procurement of RESISTOR, FIXED, FILM under solicitation N0010426QEC62, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical, with a response deadline of September 4, 2026. The procurement is governed by a comprehensive set of contractual clauses including inspection, acceptance, packaging, quality assurance, transportation, cybersecurity maturity certification, and strict compliance with defense-specific documentation and standards. Technical requirements are dictated by the Individual Repair Part Ordering Data (IRPOD), drawings, military specifications, and other referenced technical documents accessible via the e-commerce portal, with an established order of precedence resolving conflicts among contract documents. Contractors must adhere to the latest revisions of cited documents unless formally approved otherwise, and are prohibited from combining portions of different revisions of the same document. Packaging must comply with MIL-PRF-23199 and related cleanliness standards, with specific clarifications on the use of MIL-DTL-24466 green poly bags and the removal of fire-retardant packaging requirements. All supplies must be free of mercury, and compliance with child labor prohibitions applies to components sourced from China and Malaysia. The contractor is required to maintain a government-acceptable inspection system and retain complete records for government review throughout performance and beyond. Pricing is valid for 60 days after the solicitation closing date unless otherwise specified, and all contractual documents are deemed issued upon electronic transmission via email or similar methods. Technical data deliverables are governed by DD Form 1423 requirements, including specific codes for inspection, acceptance, distribution, and submission frequency, with detailed instructions mandated in Block 16 where applicable. A Certificate of Compliance per DI-MISC-81356 must accompany each delivery, uniquely tied to the contract number, National Stock Number, and nomenclature. Participation requires adherence to small business representations, equal opportunity policies for veterans and workers with disabilities, and cybersecurity certification compliance. Distribution of sensitive technical documents is restricted according to six defined codes, with access limited to authorized U.S. government entities and contractors only. All proposed deviations, waivers, or delivery extensions must be submitted in advance with full technical justification and supporting data, and must be reviewed and endorsed by the Government Quality Assurance Representative before submission to the Contracting Officer. The contract explicitly excludes commercial specifications from government sources and requires contractors to obtain them directly from publishers, while also imposing strict limitations on document use and dissemination.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 29 days
View Details
NAICS: 334416
New
SBIR / STTR
DIRECT TO PHASE II: Development of Customized Aerospace Lightweight, High Power, High Frequency Bandwidth, Nanocrystalline EMI Filters
Solicitation # DON26BZ05-DV086
The U.S. Navy is seeking to advance aerospace electrification by developing lightweight, high-performance electromagnetic interference filters using customized nanocrystalline magnetic core materials aimed at enabling high power and high frequency bandwidth operation in military aircraft. Current commercial off-the-shelf components are inadequate for the demanding power density, thermal, and EMI requirements of tactical fighter aircraft and future hybrid or fully electric platforms, which necessitate solutions that exceed COTS capabilities in both performance and weight efficiency. The initiative focuses on maturing nanocrystalline materials previously utilized in low-frequency industrial or low-power RF applications to meet the unique needs of military aerospace systems, specifically targeting a greater than 50 percent weight reduction compared to existing common mode inductor technologies while maintaining or enhancing filter attenuation and thermal stability under extreme conditions. The effort requires the development of reliable, system-level EMI filter hardware compliant with DO-160 and MIL-STD-461 standards to ensure mission readiness and avionics integrity in high-noise environments. This work is critical for overcoming the electromagnetic compatibility challenges introduced by wide bandgap power conversion systems, which offer transformative benefits in efficiency and power density but introduce significant interference risks if not properly contained. The solicitation is structured as a Direct to Phase II SBIR opportunity under a total small business set-aside, emphasizing innovation by small businesses under 500 employees to deliver next-generation magnetic components that support naval aviation modernization and may also enable commercial applications in advanced electric propulsion systems.
United States Navy

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 334416
New
DIBBS
Variable Wire Wound Resistor ManufacturingThe contract involves the manufacture of 45 units of nonprecision variable wire wound resistors that must meet military specifications and associated delivery requirements. It is structured as a subcontract under a Total Small Business Set-Aside, specifically designated for Small Business Administration participants as defined by FAR 19.5, ensuring exclusive eligibility for small businesses to compete. The North American Industry Classification System code 334416 categorizes this work within the electronic component manufacturing sector, emphasizing precision production aligned with defense standards. All work is tied to the Department of Defense through the Maritime Supply Chain organization, with performance obligations linked to defense logistics networks. The solicitation was posted on August 4, 2026, and responses are due by August 19, 2026, providing a 15-day window for qualified small businesses to submit proposals. The contract does not specify a detailed place of performance or point of contact, indicating flexibility in manufacturing location as long as compliance and delivery milestones are met. The sole reference provided is a DIBBS portal link for accessing full solicitation documents, implying that all technical, quality, and logistical specifications are available through that official platform. Suppliers must ensure adherence to military-grade standards and timely delivery to meet programmatic needs within the Department of Defense supply chain.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
Procurement of Fixed Ceramic Dielectric CapacitorThe contract pertains to the procurement of a single fixed ceramic dielectric capacitor intended for deployment in defense and aerospace applications, requiring strict adherence to military specifications and packaging standards to ensure reliability under extreme operational conditions. This is a subcontract under the Department of Defense, managed by the MARITIME SUPPLY CHAIN ESOC BUYS office, with performance obligations centered in Norfolk, Virginia, at the zip code 23511-4397. The item falls under NAICS code 334416, classifying it within the electronic component manufacturing sector, and must meet all relevant defense-grade quality and testing requirements. Bidding is open under a solicitation process with a posted date of August 4, 2026, and responses must be submitted no later than August 17, 2026. The contract does not include a set-aside designation, meaning it is open to all eligible contractors without restrictions based on business size or socioeconomic status. There is no designated point of contact listed, and all inquiries should be directed through the official DIBBS platform using the provided uiLink. The capacitor must be fully compliant with applicable military standards for performance, environmental resilience, and packaging to ensure seamless integration into critical systems.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Flatwork
Poured Concrete Foundation and Structure Contractors

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
Supply of Cartridge Fuses (NSN: 5920016463582)
Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
Technical Data and Documentation SupportThe contract requires the provision of comprehensive technical documentation, compliance evidence, and hazardous materials data for a printed circuit board to satisfy Department of Defense Logistics Agency and Defense Federal Acquisition Regulation Supplement requirements. All deliverables must align with strict regulatory standards to ensure the product’s suitability for military use, covering materials, manufacturing processes, and environmental compliance. The work is classified as a subcontract under NAICS code 541330, targeting technical documentation services for defense-related electronics. Performance is designated for Tracy, California, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. The contracting entity is the Active Devices Division within the Department of Defense, and the effort supports supply chain integrity and defense procurement protocols. While no set-aside type is specified, the requirement is narrowly focused on technical data deliverables essential for regulatory approval and operational readiness. The solicitation is accessible via the DIBBS portal for qualified participants.
Engineering Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
Printed Circuit Board Manufacturing and SupplyThe contract requires the manufacture and supply of 17 units of a specific printed circuit board with part number 2099-472-1, fully compliant with Department of Defense technical standards, including mandatory ESD and EMI protection features. All units must be packaged in accordance with prescribed compliant packaging requirements to ensure safe handling and transport. The solicitation is issued under the NAICS code 334412, categorizing it within electronic component manufacturing, and is classified as a subcontract under the Active Devices Division of the Department of Defense. Performance is designated to occur in Tracy, California, with a zip code of 95304-5000. The opportunity was posted on August 5, 2026, and all responses are due by August 17, 2026, with no set-aside provisions specified. The contract is accessible through the DIBBS platform under the reference number SPE7M526T368P.
Bare Printed Circuit Board Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171 / DFARS 7012)This contract requires the implementation of cybersecurity controls to safeguard covered defense information throughout manufacturing and logistics operations, in full alignment with NIST SP 800-171 and DFARS 7012 requirements. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and is classified as a subcontract under a Women-Owned Small Business Set-Aside, meaning only eligible WOSB firms may respond. The solicitation, issued by the Department of Defense’s Active Devices Division, targets organizations with expertise in securing sensitive defense data in industrial environments, with the NAICS code 541512 indicating the scope relates to computer systems design and related services. Bidders must submit their proposals by August 17, 2026, following the posting date of August 5, 2026, ensuring all cybersecurity controls are fully documented, implemented, and verifiable to meet federal standards for protecting controlled unclassified information.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract requires comprehensive identification and documentation of hazardous materials within the CCA, with a focus on preparing and submitting Safety Data Sheets that meet both OSHA and Department of Defense standards. This work involves thorough evaluation of chemical substances, accurate classification according to regulatory criteria, and the timely creation of compliant SDS documents to ensure workplace safety and regulatory adherence across all applicable operations. The effort is critical to maintaining compliance with federal safety protocols and supporting defense-related activities where hazardous material handling is a core operational requirement. This subcontract is set aside exclusively for Women-Owned Small Businesses under the NAICS code 541620, which pertains to environmental consulting services. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity falls under the Active Devices Division of the Department of Defense, indicating that the work supports specialized defense systems or infrastructure. All deliverables must align precisely with federal safety regulations and be submitted through the designated federal procurement portal.
Environmental Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423690
New
DIBBS
Electronic Component Sourcing and SupplyThe contract calls for the sourcing and supply of specialized electronic components, including those containing hazardous materials like mercury switches, with strict requirements for compliant packaging and full traceability throughout the supply chain. All deliveries must adhere to safety and environmental standards to ensure proper handling, storage, and documentation of controlled substances, reflecting the sensitive nature of the components and the regulatory obligations tied to their use. The effort is governed under a Women-Owned Small Business Set-Aside, designated with NAICS code 423690, and is issued as a subcontract by the Active Devices Division within the Department of Defense. Responses are due by August 17, 2026, with performance expected to be centered at the facility in New Cumberland, Pennsylvania, zip code 17070-5002.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
Circuit Card Assembly (CCA) ManufacturingThe contract entails full manufacturing of a circuit card assembly to meet military specifications, covering all stages from component sourcing and printed circuit board fabrication to final assembly and quality verification. This is a subcontract opportunity designated specifically for Women-Owned Small Businesses under the WOSB Set-Aside program, with the North American Industry Classification System code 334418 indicating electronics manufacturing services. The work must be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is sponsored by the Active Devices Division under the Department of Defense. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with all submissions required to align with military standards for reliability, performance, and traceability under stringent defense procurement protocols.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details