Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RESISTOR, FIXED, FILM

Active
SPE7M5-26-T-346WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a fixed film resistor with part number 5905014991408, sourced from Ohmite Holding, L.L.C., and governed by strict technical and packaging standards set by the Defense Logistics Agency. The item must comply with a source-controlled drawing and meet all technical and quality requirements referenced from the DLA Master List, with revisions controlled based on the solicitation or award date. The resistor must be marked in accordance with MIL-STD-129 and IPC/JEDEC J-STD-609, including specific lead finish标识 for Pb or Pb-free status on each unit pack, with placement strictly following the standard’s guidelines. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with each unit packed in E5 intermediate containers of 100 pieces, palletized per RP001, and labeled with special marking code ZZ for additional requirements. Delivery is required within 168 days to the DLA Distribution Depot Hill in Hill AFB, Utah, with no variance allowed in quantity and inspection and acceptance points set at destination. The item is designated as a critical application component, and only approved sources currently listed on the source-controlled drawing may fulfill the requirement, though future qualification is possible through direct contact with the cognizant design activity. The contract is issued under solicitation SPE7M5-26-T-346W with a response deadline of August 3, 2026, and an original delivery requirement of April 2, 2027, with a need ship date of January 19, 2027.

General Info

Procure fixed film resistor 5905014991408 per DLA standards, marked and packed to MIL-STD, deliver to Hill AFB by April 2, 2027.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-346W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Jeanette Heisey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR,FIXED,FILM
RESISTOR,FIXED,FILM
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED
IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF
FUTURE ACQUISITION MUST CONTACT THE
COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE
SOURCE CONTROLLED DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
SOURCE CONTROL
CRITICAL APPLICATION ITEM
OHMITE HOLDING, L.L.C. 72819 P/N 887SP037
TDP Rev A Gen 1 IAW BASIC DRAWING NR 97942 560R559 REVISION NR C DTD 03/01/2007 PART PIECE NUMBER: 560R559H01
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97942 12P2-2APY1-54-8 REVISION NR DTD 07/01/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE7M5-26-T-346W
SECTION B
PR: 7017603159 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017603159 0001 EA 12.000
NSN/MATERIAL:5905014991408
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BS OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
SPE7M5-26-T-346W
SECTION B
PR: 7017603159 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:01/19/2027 Original Required Delivery Date:04/02/2027
SPE7M5-26-T-346W NSN/Part Number: 5905-01-499-1408 Quantity: 12 EA Purchase Request: 7017603159QTY: 12 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
TRANSFORMER, POWERThe contract solicitation is for eight power transformers identified by NSN 5950-01-273-4185, with a required delivery deadline of 168 days after award. The procurement is managed under solicitation number SPE7M1-26-T-227S, issued by the Department of Defense’s Maritime Supply Chain, and is subject to all DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Offerors must provide a complete data package covering both the approved and alternate parts, and any non-accepted supplies must have government identification removed in accordance with specified procedures. The place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the primary point of contact is Ryan Snyder, reachable via email and phone provided. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 334416 for electrical equipment manufacturing, and is classified as a federal procurement with no specific set-aside.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMALThe contract is for the procurement of a thermal resistor with NSN 5905-01-414-4341 and part number 406743078B, supplied by ABB Motors & Mechanical Inc, with a total quantity of 12 units at a unit price of $12.00, totaling $144.00. Delivery is required FOB origin within 168 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and packaging must conform to MIL-STD-2073-1E with specific preservation, wrapping, and container standards per QUP 001. Marking requirements follow MIL-STD-129 and include special code ZZ for additional specifications; additionally, each unit package must be marked per IPC/JEDEC J-STD-609 to indicate lead content and compliance with lead-free standards. Mercury and mercury-containing compounds are strictly prohibited unless explicitly allowed for functional components like batteries, lamps, or sensors, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier as per NAVSEA 5100-003D. The delivery address is DLA Distribution San Joaquin in Tracy, California, with a required ship date of January 19, 2027 and original delivery due by February 27, 2027. The contract is issued under solicitation SPE7M5-26-T-341C, with point of contact Jeanette Heisey, and is governed by DoD procurement regulations including unit of issue standards and transportation protocols outlined in DLAD proc notes C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTRThe contract solicits 181 fixed electrolytic capacitors with NSN 5910-01-595-5161 under solicitation number SPE7M5-26-T-348G, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All offerors must comply with DLA packaging requirements and include complete data packages for both the approved and alternate part, as no data is currently available. Physical identification and bare item marking must adhere to RQ017 specifications, and non-accepted supplies must have government identification removed per RQ011. The delivery schedule mandates fulfillment within 168 days after order, with the place of performance specified as New Cumberland, PA, 17070-5002. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is categorized under NAICS code 334416 for electronic component manufacturing. Primary point of contact is Matthew Stanko, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICALThe contract pertains to the procurement of 13 electrical coils identified by NSN 5950-01-227-4552 under purchase request 7017604107, with a delivery requirement of 168 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract mandates that alternate offerors submit a complete data package including specifications for both the approved and alternate parts, with no government identification to be removed from non-accepted supplies. The solicitation number is SPE7M1-26-T-225J, posted on July 23, 2026, with responses due by August 3, 2026. The North American Industry Classification System code is 334416, and the procuring agency is the Department of Defense through the Maritime Supply Chain office. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the primary point of contact is Ryan Snyder, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER AUTO
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PLASTI
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, WIRE
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, RADIO FREQ
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VOLTAGE SE
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThe item is an electrical connector receptacle with NSN 5935-01-339-5850, requested in a quantity of 19 units under purchase request 7017601032, with a total quantity of 362 associated with the solicitation. Delivery is required within 129 days after the award date. The solicitation, issued by the Department of Defense’s Active Devices Division, carries the identification number SPE7M5-26-T-352E and was posted on July 23, 2026, with responses due by August 3, 2026. The NAICS code 334417 identifies this as part of the electronic component manufacturing sector. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Access is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received explicit approval from the DLA controlling authority. The primary point of contact for inquiries is Margaret Smith, reachable via email and phone provided, and performance is to occur in San Diego, California, 92136-3581.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of one electrical plug connector identified by NSN 5935-01-097-4219 and part number WTAX40SECSY from AIRBORN INTERCONNECT, LLC, under solicitation SPE7M5-26-T-349X. Delivery is required within ten days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for labeling and marking. Hazardous material handling, if applicable, must follow Fed-Std-313 and TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable only if not overridden by DLA standards. Palletization must meet RP001 DLA packaging requirements, and the unit of issue is each (EA). The item is designated as a critical application component. The delivery destination is AL DHAFRA AIR BASE, AE, under military logistics code W910DH, with the shipment reference RDD 555 and project code 9AL TP 2. Transportation and freight instructions are governed by DLAD PROC NOTES C19 and C20. The contract mandates removal of government identification from non-accepted supplies and physical marking of the bare item. The original required delivery date is July 21, 2026, and the solicitation response deadline is August 3, 2026, with a post date of July 23, 2026. The primary point of contact is Margaret Smith of the Active Devices Division, Department of Defense, and the procurement falls under NAICS code 334417. Government use fields indicate specific distribution and forwarding codes for internal tracking.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThe contract is for the procurement of two electromagnetic relays with part number RA-3100L and NSN 5945-01-464-8886, under solicitation SPE7M5-26-T-351S, which is a total small business set-aside. Delivery is required within 168 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, including special marking code ZZ for additional requirements, and must be palletized according to DLA standards. The relays must be free of intentional mercury or mercury compounds, except in limited exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems approved by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Each individual unit package must be marked in accordance with IPC/JEDEC J-STD-609 to identify lead content and other attributes, with placement strictly following the standard’s guidelines. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The required ship date is January 19, 2027, with an original delivery deadline of November 18, 2026. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List and are binding.
Relay and Industrial Control Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, CONNECTORThis contract is for the procurement of 10 units of an adapter connector with NSN 5935-00-201-2755 and part number 799-5 from Winchester Interconnect Corporation, under solicitation SPE7M5-26-T-341S. The item is classified as a critical application item and must comply with all DLA packaging, marking, and technical requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Strict prohibitions apply to the intentional use of mercury or mercury-containing compounds in the product, preservation materials, packaging, and marking, with narrow exceptions for specific functional uses such as batteries, fluorescent lamps, sensors, and weapon systems, provided they meet Navy specifications including double containment and shock-proofing per NAVSEA 5100-003D. All packaging must conform to MIL-STD-2073-1E using Method 31 preservation, D3 unit containers, and E-A wrap material, and all marking must adhere to MIL-STD-129 with no special markings required. Delivery is FOB origin, with a required delivery timeline of 168 days, and inspection and acceptance occur at destination. The unit of issue is each, with a fixed quantity of 10 units priced at $10.00 each for a total of $100.00 and no variance allowed. The contract mandates compliance with hazardous materials handling procedures per IP025 and prohibits mercury in any preservation or packaging components under IP056. The designated delivery point is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, and transportation guidelines are referenced in DLAD Proc Notes C19 and C20. The original required delivery date is October 7, 2026, with a need-by date of January 19, 2027. The contract falls under NAICS code 334220 and is managed by the Department of Defense’s Active Devices Division, with Margaret Smith listed as the primary point of contact. Solicitation was posted on July 23, 2026, with responses due by August 3, 2026. All contractual obligations are governed by the DLA Master List revision in effect on the solicitation issue date, and any amendments supersede prior versions.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
MOTOR, CONTROLThis contract is for the procurement of motor control units under solicitation SPE7M5-26-T-343B, issued by the Department of Defense’s Active Devices Division as a Total Small Business Set-Aside. The item, identified by NSN 6105-00-942-2297 and part numbers from multiple qualified suppliers, requires 50 units to be delivered FOB origin within 40 days of contract award, with strict no variance in quantity. Delivery must be made to DLA Distribution Depot Hill at Hill AFB, Utah, following all DLA packaging directives, which mandate compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, and require palletization per RP001 standards. The DLA Master List of Technical and Quality Requirements overrides any conflicting specifications and governs all technical and quality criteria referenced by R or I numbers. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) at a fixed price of $50 per unit, totaling $2,500. The contract includes specific transportation guidelines and mandates that all packaging and documentation meet exact DLA requirements, with a required ship date of September 13, 2026, and an original delivery deadline of January 9, 2027. The solicitation closed on August 3, 2026, with primary point of contact Corey Carter available for inquiries.
Relay and Industrial Control Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
GUIDE, VALVE STEMThe contract pertains to the procurement of two valve stem guides, identified by NSN 4820-01-272-0561 and part number 7V18D0E01-5, supplied by Newmans Inc New Jersey Div 61661. The item is to be delivered FOB origin within 137 days of the contract award, with no variance allowed in quantity—exactly two units must be furnished. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods such as air evaporation drying and use of FA wrap material, with all units contained in D3 unit containers and E5 intermediate containers. Marking must follow MIL-STD-129 without any special codes, and palletization adheres to DLA packaging requirements. Delivery is directed to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, and transportation is governed by DLAD procedural notes C19 and C20. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the product, with limited exceptions for functional uses in batteries, instruments, or chemical reagents, and mandates a secondary containment barrier for any portable devices containing mercury as per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version effective on the solicitation issue date controlling. The solicitation number is SPE7M5-26-T-351F, with a response deadline of August 3, 2026, and the primary point of contact is Daniel Zimmerman at the Department of Defense’s Active Devices Division.
Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 444180
New
DIBBS
ANTENNAThe contract pertains to the procurement of 17 antennas with NSN/Part Number 5985-01-632-5803 under solicitation SPE7M5-26-T-341L, issued by the Department of Defense’s Active Devices Division. Delivery is required within 168 days of award, and responses must be submitted by August 3, 2026. The solicitation incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Contractors must comply with all applicable DLA packaging and data requirements, including the removal of government identification from non-accepted supplies and handling of covered defense information. The alternate offeror is obligated to provide a complete data package encompassing both the approved and alternative part. The place of performance is specified as Tracy, California, 95304-5000, and all inquiries should be directed to Matthew Stanko at fmtewiq@dla.mil or 312-850-7245. The contract falls under NAICS code 444180 and is a federal procurement with no set-aside designation.
Other Building Material Dealers

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVICE, DThis contract specifies the procurement of a semiconductor diode with part number SC460-101900-00 and NSN 5961-01-467-8379, under solicitation SPE7M5-26-T-348R, requiring 21 units to be delivered within 168 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including supply chain traceability per DLA Directive Procurement Note C03 (August 2016). Suppliers must be on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for FSC 5961 and 5962, and all items must meet the qualification standards outlined in Procurement Note M01. Mercury and mercury-containing compounds are strictly prohibited in or on the product except for specific functional applications permitted by NAVSEA, with additional containment requirements for portable devices. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA packaging requirements, with unit packages labeled in accordance with IPC/JEDEC J-STD-609 for lead-free and material attributes, including proper placement and verification. Preservation and packaging must follow MIL-DTL-19491 for semiconductor devices, though no technical data is currently available; the supplier is required to provide documentation to confirm ESD/EMI sensitivity and enable appropriate packaging assignment. The contract is a total small business set-aside under NAICS 334413, with delivery point in Bremerton, Washington, and inspection and acceptance occurring at destination. No quantity variance is permitted, and the contractor must retain all supply chain documentation. The contract also mandates removal of government identification from non-accepted supplies and requires formal change management procedures for any configuration deviations.
Semiconductor and Related Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETThis contract specifies the procurement of an electromagnet relay under NSN 5945-01-220-4267, with a requirement for 42 units to be delivered within 168 days from the contract award, FOB origin. The item is designated as a critical application item and must conform to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, container types, and labeling in compliance with MIL-STD-129. Each unit package must be marked according to IPC/JEDEC J-STD-609 to identify lead content and associated attributes, with placement strictly adhering to the standard’s guidelines. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and configuration changes require formal engineering change proposals or variance requests. The delivery destination is DLA Distribution Cherry Point in North Carolina, and the shipment must be arranged under DLAD Procurement Notes C19 and C20. The original required delivery date is February 20, 2027, with a need-by date of January 19, 2027. The unit price is $42.00 per item, totaling $1,764.00, and the solicitation number is SPE7M5-26-T-343Y, issued by the Department of Defense’s Active Devices Division. Approved suppliers include Teledyne Defense Electronics, Hamilton Sundstrand Corporation, and TE Connectivity Corporation, each with specified part numbers.
Relay and Industrial Control Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL CThis contract specifies the procurement of a backshell for an electrical connector and a cable clamp adapter under NSN 5935-01-281-0060, with a total quantity of 19 units to be delivered within 168 days of contract award. The items must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the use of any Class I ozone-depleting substances is strictly prohibited in design, manufacturing, testing, or cleaning unless written approval is obtained from the contracting officer, with exceptions applying only to commercial items as defined under FAR 11.001 or part-numbered-only items. Packaging and preservation must adhere to MIL-DTL-55330 for connectors and MIL-STD-2073-1E for packaging data, with marking requirements following MIL-STD-129 and no special marking code applied. The delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The items must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery target of January 13, 2027. Only approved part numbers from Glenair, Inc. and Joslyn Sunbank Company, LLC are acceptable, and all transportation and shipping procedures must conform to DLA procedural notes C19 and C20.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details