Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

RESISTOR NETWORK, FIXED

Active
SPE7M5-27-T-0560Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M5-27-T-0560, issued by the DLA Weapons Support Active Devices Division, is a request for the procurement of three fixed film resistor networks, part number M8340106K4701GG (NSN 5905012016428). The items must comply with basic specification MIL-PRF-83401/6D(4) and reference specification MIL-PRF-83401H(5) SUP 1, both dated May 29, 2024. As this is a primary Qualified Products List (QPL) or Qualified Manufacturers List (QML) item, adherence to these lists is mandatory. The required ship date is April 6, 2027, with a final delivery date of June 21, 2027, delivered FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates rigorous packaging and marking standards, specifically requiring DOD qualified Electrostatic Discharge (ESD) and Electromagnetic Interference (EMI) protective materials per MIL-PRF-81705. All items must be handled at approved field force protective work stations and marked according to MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Inspection and acceptance are set for destination under FAR 52.246-2. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and compliance with the Buy American Act and DFARS cybersecurity standards for safeguarding covered defense information. Quotations must be submitted through the DIBBS portal by October 23, 2026.

General Info

DLA solicitation for three fixed film resistor networks delivered by June 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1

RFQ SPE7M5-27-T-0560

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Deadline changed

Response deadline changed from Oct 23, 2026 to Oct 28, 2026.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION
Office AddressUSA
Contacts
Jeanette Heisey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR NETWORK,FIXED,FILM
RESISTOR NETWORK<(>,<)> FI
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
BID SET AVAILABLE.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-83401/6D(4) REVISION NR D DTD 05/29/2024 PART PIECE NUMBER: M8340106K4701GG
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-83401H(5) SUP 1 REVISION NR H DTD 05/29/2024 PART PIECE NUMBER: M8340106K4701GG
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M5-27-T-0560
SECTION B
PR: 7018672734 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018672734 0001 EA 3.000
NSN/MATERIAL:5905012016428
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
CAUTION SENSITIVE ELECTRONIC DEVICE DO NOT OPEN EXCEPT AT APPROVED FIELD FORCE PROTECTIVE WORK STATION UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier
SPE7M5-27-T-0560
SECTION B
PR: 7018672734 PRLI: 0001 CONT’D
material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/06/2027 Original Required Delivery Date:06/21/2027
SPE7M5-27-T-0560
SECTION B
PR: 7018672734 PRLI: 0001 CONT’D
SPE7M5-27-T-0560 NSN/Part Number: 5905-01-201-6428 Quantity: 3 EA Purchase Request: 7018672734QTY: 3 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
REACTOR
Solicitation # SPE7M1-27-T-0561
Solicitation SPE7M1-27-T-0561 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for the acquisition of 11 units of a reactor, identified by NSN 5950010166080. The contract requires delivery within 164 days, with terms set as FOB Origin. Inspection and acceptance will occur at the destination. The items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract incorporates stringent technical and security requirements, including a CMMC Level 2 Self-Assessment and safeguarding of covered defense information per DFARS 252.204-7012. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional use. Compliance with the Buy American Act and the Berry Amendment is required for quotes above the micro-purchase threshold. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M5-27-T-0529
Solicitation SPE7M5-27-T-0529 is for the procurement of 58 fixed wire wound resistors, identified as critical application items under NSN 5905011230704. The requirement specifies either Raytheon Company part number 956147-95B or Vishay Dale Electronics part number ESN-10-6 (887 Ohms 1%). Delivery is required by March 25, 2027, with a need ship date of April 6, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-39032 for resistor preservation. Additionally, component lead finish markings must comply with IPC/JEDEC J-STD-609. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONW
Solicitation # SPE7M5-27-T-0420
Solicitation SPE7M5-27-T-0420 is a fixed-price procurement issued by the DLA Weapons Support Active Devices Division for five precision, non-wire wound variable resistors under NSN 5905-00-114-2643. The items are critical application components that must adhere to a source-controlled drawing, meaning only approved sources cited on the drawing are eligible. The required delivery date is August 28, 2027, with a need ship date of April 6, 2027, for delivery to DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to technical and quality standards, including MIL-DTL-39032 for resistor preservation and packaging, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging data. Additionally, contractors must comply with IPC/JEDEC J-STD-609 for lead finish marking and the Hazard Communication Standard for any hazardous materials. Key administrative requirements include CMMC Level 2 self-assessment, the use of the Wide Area WorkFlow (WAWF) system for invoicing, and compliance with the Buy American Act and Berry Amendment. Inspection and acceptance will occur at the destination.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PAPER
Solicitation # SPE7M5-27-T-0720
Solicitation SPE7M5-27-T-0720 is a request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 13 units of fixed paper dielectric capacitors, identified by NSN 5910014968214. This is a source controlled drawing item with approved source 00853 12656, and all furnished items must strictly adhere to the cited drawings and military specifications. The procurement is a total small business set-aside under NAICS code 334416. Quotes must be submitted electronically by October 23, 2026. The items are to be delivered to DLA Distribution San Diego, with a need ship date of April 6, 2027, and an original required delivery date of January 16, 2028. While the shipping terms are listed as FOB Destination Other, offers must be submitted based on FOB Origin under the First Destination Transportation program. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and IPC/JEDEC J-STD-609, with specific requirements for hazardous materials labeling per 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow system for all invoicing and payment requests. The contract incorporates several critical federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Origin inspection is required per FAR 52.246-2, and the procurement is subject to the DLA Master List of Technical and Quality Requirements.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M5-27-T-0699
Solicitation SPE7M5-27-T-0699 is a fixed-price contract issued by the DLA Weapons Support Active Devices Division for the procurement of eight fixed electrolytic capacitors, identified by NSN 5910014358221. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania with a delivery window of 164 days after award. The contract is governed by the First Destination Transportation program with FOB Origin terms, and inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality standards, including preservation and packaging per MIL-DTL-39028 and marking requirements according to MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Environmental and safety compliance is mandatory, specifically prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements and safeguarding of covered defense information under DFARS 252.204-7012. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Award evaluation is based primarily on price, with preferences for HUBZone concerns and a strict prohibition on items produced via additive manufacturing.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
Solicitation # SPE7M5-27-T-0850
Solicitation SPE7M5-27-T-0850, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for 10 units of a variable resistor (NSN 5905013460759). Identified as a critical application item, the procurement is categorized under NAICS 334416. The required delivery date is May 26, 2026, with a need ship date of May 5, 2026, and a delivery window of 54 days after order. Shipping terms are FOB Origin, while inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. A special marking requirement, code ZZ, is mandatory for component lead finish per IPC/JEDEC J-STD-609. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with specific acceptance quality levels for critical, major, and minor attributes. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-27-T-0497
Solicitation SPE7M5-27-T-0497 is a request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 62 electrical contacts, identified as commercial items with NSN 5999-00-948-4478 and AMETEK P/N 1001175. The contract requires delivery to the DLA Distribution Depot Hill in Utah, with a need ship date of October 8, 2026, and an original required delivery date of January 28, 2027. Delivery is specified as FOB Origin, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials should be packaged per ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Key quality requirements include RQ011 for the removal of government identification from non-accepted supplies and RQ017 for bare item marking. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. Offerors must be registered in the System for Award Management and provide representations regarding their small business size status under NAICS code 334416.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M5-27-T-0579
Solicitation SPE7M5-27-T-0579 is a procurement request by the DLA Weapons Support Active Devices Division for 414 units of fixed, wire wound, inductive resistors, identified by NSN 5905-01-259-5020 and part number RWR80S5490FS. The items must comply with MIL-PRF-39007/8L(4) and MIL-PRF-39007K specifications and are subject to the Qualified Products List or Qualified Manufacturers List. Delivery is required by April 6, 2027, with a delivery window of 164 days, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-39032. Specific requirements include the identification of lead or lead-free attributes on individual unit packs according to IPC/JEDEC J-STD-609. The use of Class I ozone-depleting substances is prohibited without written approval. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and mandates compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Quotations were due by October 23, 2026, via the DIBBS portal.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-27-T-0524
Solicitation SPE7M5-27-T-0524 is a request for quotations from the DLA Weapons Support Active Devices Division for the procurement of 3,125 fixed film resistors, part number RNC60K25R5FS (NSN 5905010489070). The items must adhere to basic specification MIL-PRF-55182/1R(1) and technical data TDP Rev A Gen 1 dated August 15, 2024. Delivery is required within 164 days, with a need ship date of April 6, 2027, and a final required delivery date of April 29, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the components, DOD qualified electrostatic discharge and electromagnetic interference protective packaging per MIL-PRF-81705 is required, including the use of specific barrier materials from QPL-81705 manufacturers. Additionally, the contractor must apply lead finish markings according to IPC/JEDEC J-STD-609. The procurement prohibits the use of class I ozone-depleting substances and the intentional addition of mercury. All quotes must be submitted via the DLA Internet Bid Board System, and invoicing must be processed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY, UNINTERRU
Solicitation # SPE7L7-27-T-0167
Solicitation SPE7L7-27-T-0167 is a fixed-price request for quotations issued by DLA Weapons Support for the procurement of two uninterruptible power supplies, NSN 6130-01-523-2028, manufactured by Energy Technologies Inc (Part Number ETI0001-1058). This is a restricted source item requiring government design control activity approval and is designated as a critical application item. The procurement is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) with the Non-Manufacturer Rule waived. Quotes are due by October 23, 2026, with a required delivery date of December 14, 2027, and a delivery lead time of 164 days after order. The items are subject to a non-extendable 60-month shelf life and must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. Strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is required, including Special Marking Code 32. The contract mandates compliance with hazardous material communication standards and prohibits the intentional addition of mercury, except in specific functional components. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, as well as compliance with Buy American Act and cybersecurity regulations regarding covered defense information.
DLA DIST SAN JOAQUIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-27-T-0437
Solicitation SPE7M5-27-T-0437 is for the procurement of 195 fixed film resistors, identified by NSN 5905002739765 and part number RNC60H8002BS. The items must meet MIL-PRF-55182K specifications and are designated as Qualified Products List items, requiring offerors to provide components only from qualified sources. Delivery is required by September 16, 2027, with a delivery window of 164 days after award. The contract is managed by the DLA Weapons Support Active Devices Division, with destination inspection and acceptance required. Strict packaging and marking standards apply, specifically requiring DOD qualified Electrostatic Discharge and Electromagnetic Interference protective materials per MIL-PRF-81705. All shipments must adhere to MIL-STD-129 marking requirements, including the specific code 39 for ESD sensitive electronic devices. The contract prohibits the use of class I ozone-depleting substances and the intentional addition of mercury. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Compliance with the Buy American Act and various DFARS safeguarding and telecommunications regulations is mandatory.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-27-T-0432
Solicitation SPE7M5-27-T-0432 is for the procurement of 14 fixed film resistors, part number RNC60H2182DS, under NAICS code 334416 for the DLA Weapons Support Active Devices Division. The items must be manufactured in accordance with specifications MIL-PRF-55182/3T(1) and MIL-PRF-55182K(1) SUP 1, both dated August 15, 2024. Delivery is required within 164 days, with an original required delivery date of March 18, 2027, and a need ship date of April 6, 2027. The terms are FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the sensitive nature of the electronic devices, DOD qualified electrostatic discharge and electromagnetic interference protective packaging per MIL-PRF-81705 is required, and all handling must occur at approved field force protective workstations. The procurement is subject to the Buy American Act and includes various FAR and DFARS clauses regarding cybersecurity, human trafficking, and the prohibition of ozone-depleting substances. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 339999
New
DIBBS
Military-Grade Packaging and Marking Services
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
Supply of Antenna (NSN 5985-01-455-4489)
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC Packaging and Marking Services
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 334419
New
DIBBS
Manufacture of Blade Fold Sensors (NSN 5985-01-647-0595)
Other Electronic Component Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 334220
New
DIBBS
Antenna Component Supplier (NSN 5985-01-455-2544)
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-0611
Solicitation SPE7M5-27-T-0611, issued by the DLA Weapons Support Active Devices Division, is for the procurement of nine electromagnetic relays, identified as critical application items. The required hardware corresponds to NSN 5945012695991, with approved part numbers from The Boeing Company (ST5M1242-006) and DRI Relays Inc. (CVSTD102-1013). Delivery is required within 164 days, with a need ship date of April 6, 2027, and a final required delivery date of September 8, 2027. The terms are FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates rigorous quality and packaging standards. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance. Due to the sensitive nature of the electronics, the contractor must utilize DOD qualified ESD and EMI protective packaging per MIL-PRF-81705 and follow MIL-STD-129 for marking. Additionally, component lead finish markings must comply with IPC/JEDEC J-STD-609. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and safeguarding covered defense information.
Relay and Industrial Control Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-27-T-0671
Solicitation SPE7M5-27-T-0671 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for 29 electrical receptacle connectors, part number MS17348R16N10P (NSN 5935-01-324-8453). This is a critical application and qualified item requiring compliance with Basic Specification MS17348H(2) and Reference Specification MIL-DTL-22992H(4) SUP 1. Delivery is required within 164 days, with an original required delivery date of February 21, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and material controls, including a prohibition on Class I ozone-depleting substances and the intentional addition of mercury. Material manufactured by Amphenol, Matrix, or Pyle National with lot date codes between July 2006 and June 2016 is explicitly prohibited, and traceability documentation may be required. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Offerors must comply with the Buy American Act and Berry Amendment, and submit quotations by October 23, 2026. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system.
Electronic Connector Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-27-T-0892
Solicitation SPE7M5-27-T-0892, issued by the DLA Weapons Support Active Devices Division, is for the procurement of 152 electrical contacts, specifically Amphenol Corp part number 21-033101-024 (NSN 5999-01-664-5390). The contract specifies a delivery timeline of 164 days after order, with an original required delivery date of December 13, 2026, and a need ship date of April 6, 2027. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance being DLA Distribution Jacksonville in Florida. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, specifically references RA001, RP001, and RQ011. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The procurement is subject to various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including those regarding the Buy American and Balance of Payments Program, safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment.
Other Electronic Component Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334413
New
DIBBS
TRANSISTOR
Solicitation # SPE7M5-27-T-0608
Solicitation SPE7M5-27-T-0608 is a fixed-price contract issued by the DLA Weapons Support Active Devices Division for the procurement of 245 units of a specific transistor, part number JANTX2N6193, under NSN 5961-01-282-7235. This is identified as a critical application commercial item. The procurement is governed by technical specifications MIL-PRF-19500R(1) and MIL-PRF-19500/561K(3). Delivery is required within 280 days, with the destination and inspection point set at DLA Distribution Depot Hill, Utah. The contract imposes strict quality and compliance requirements, including adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding Qualified Manufacturers Lists (QML) and Qualified Suppliers List of Distributors (QSLD). Contractors must maintain supply chain traceability documentation and comply with MIL-STD-129 for marking and MIL-DTL-19491 for semiconductor packaging. Additionally, lead finish markings must follow IPC/JEDEC J-STD-609. The agreement prohibits the intentional addition of mercury and excludes any offers involving additive manufacturing. Invoicing is to be processed electronically via the Wide Area WorkFlow system.
Semiconductor and Related Device Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334220
New
DIBBS
ATTENUATOR, FIXED
Solicitation # SPE7M5-27-T-0425
Solicitation SPE7M5-27-T-0425 is a request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of six fixed attenuators, identified by NSN 5985001100343. The requirement is categorized under NAICS code 334220 and is designated as a critical application item. Approved sources include Spectrum Control Inc, Dal-Tech Devices Inc, and Narda Holdings Inc. The procurement is conducted under the First Destination Transportation program with shipping terms as FOB Origin, and the required delivery date is April 7, 2027, with a need ship date of April 6, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 for palletization and MIL-STD-129 for marking and labeling. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and the Hazard Communication Standard. Compliance requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. All quotes must be submitted via the DLA Internet Bid Board System, and the award may be processed through an automated system.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334417
New
DIBBS
CLAMP, CABLE, ELECTRICAL
Solicitation # SPE7M5-27-T-0840
Solicitation SPE7M5-27-T-0840, issued by the DLA Weapons Support Active Devices Division, is for the procurement of 1,667 electrical connector cable clamps, also identified as connector backshells. The required item is part number M85049/51-1-8W (NSN 5935-01-183-6497), which must be manufactured by a qualified QPD source in accordance with SAE-AS85049. This is a critical application item, and the government will only accept components from sources qualified on the applicable QPL/QML; commercial substitutes and items produced via additive manufacturing are prohibited without prior written approval. The contract specifies a delivery period of 43 days, with a need ship date of October 13, 2026, and an original required delivery date of January 8, 2027. Delivery is FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-129 for marking and RP001 for palletization, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025 and FED-STD-313. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Electronic Connector Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS