Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RESISTOR, VARIABLE, N

Active
SPE7M5-26-T-357BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation SPE7M5-26-T-357B calls for four variable resistors with NSN 5905-01-161-0871 under full and open competition, with delivery required within 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is subject to strict packaging standards, mandatory physical marking of the bare item, and the removal of government identification from non-accepted supplies. The use of any Class I ozone-depleting substances in design, manufacturing, or cleaning processes is prohibited unless explicit written approval is obtained from the Contracting Officer, though this restriction does not apply to commercial items as defined by FAR 11.001. Technical data associated with this item is subject to export controls under either ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and authorization from DLA. All export-related disclosures, including to foreign nationals within the U.S., are controlled under DFARS 252.225-7048. Cybersecurity compliance mandates that the vendor must be certified by a CMMC Level 2 Certified Third-Party Assessment Organization. The solicitation closes on August 10, 2026, with Jeanette Heisey as the primary point of contact.

General Info

Four variable resistors due in 20 days, CMMC Level 2 certified, export controlled, no ozone-depleting substances.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Jeanette Heisey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR,VARIABLE,N
RESISTOR,VARIABLE,N
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
FULL AND OPEN COMPETITION APPLIES.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire
SPE7M5-26-T-357B
SECTION B
(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5905-01-161-0871 Quantity: 4 EA Purchase Request: 7017669486QTY: 4 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, MET
Solicitation # SPE7M5-26-T-357Z
This contract specifies the procurement of a fixed metallized paper-plastic capacitor identified by NSN 5910-01-222-2473 and part number M83421/01-5233S, governed by military specification MIL-PRF-83421F and its amendment MIL-PRF-83421/1F. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions in effect as of the solicitation issuance or award date depending on acquisition size. Manufacturing processes are strictly prohibited from using any Class I ozone-depleting substances unless explicit written approval is obtained from the contracting officer, and this restriction supersedes all conflicting specifications while maintaining performance standards. The item is listed on the Qualified Products List, requiring adherence to qualification standards and documentation. The contractor must deliver 58 units under a firm fixed price contract with zero variance in quantity, FOB origin, and delivery required within 85 days of contract award, with an original delivery date of February 4, 2026. Packaging must conform to MIL-STD-2073-1E with specific preservation methods and packaging codes, and labeling must follow MIL-STD-129 including the special marking code ZZ for unique requirements. Each unit package must be marked in accordance with IPC/JEDEC J-STD-609 to clearly identify lead content, with markings placed as specified in the standard. Hazardous materials handling, shipping, and transportation are governed by DLAD procedural notes C19 and C20, and all items are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is managed under solicitation SPE7M5-26-T-357Z, with point of contact Samuel Cooper and a response deadline of August 10, 2026, issued under NAICS code 334416 for electronic component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
ATTENUATOR, FIXED
Solicitation # SPE7M0-26-Q-1123
The contract is for a single fixed attenuator with NSN 5985-01-015-4408, issued under solicitation SPE7M0-26-Q-1123 by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within 30 days after award, with a response deadline of August 12, 2026. The technical data associated with this item is subject to strict export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DLA training on handling export-controlled technical data and have received formal approval from the DLA controlling authority. The point of contact for the solicitation is Audrey Acuna, reachable via email and phone as listed.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, WIRE
Solicitation # SPE7M0-26-T-023K
This contract pertains to the procurement of two variable wire wound nonprecision resistors with NSN 5905-00-577-3973, under solicitation SPE7M0-26-T-023K, with a required delivery within five days of order placement. The item is designated as a critical application component and must comply with the technical specifications outlined in MIL-PRF-19/2D and MIL-PRF-19E, both dated January 5, 2022. The resistors must originate from manufacturers listed on the Qualified Products List or Qualified Manufacturers List valid at the time of award, and all units must be marked per MIL-STD-129 with the special marking code ZZ. Strict environmental controls are enforced: mercury and mercury compounds are prohibited unless explicitly exempted for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents per NAVSEA 5100-003D, and any portable devices containing mercury must include a secondary containment boundary. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and cushioning, and each unit package must be labeled in accordance with IPC/JEDEC J-STD-609 to indicate lead content and other attributes. Delivery is FOB destination to the US Air Force Prepositioning Program at Al Udeid Air Base, Qatar, with final delivery point being APO AE 09309-9998. The quantity must be exact with zero variance, and acceptance occurs at the destination upon inspection. The contract includes specific government use identifiers and a required delivery date of July 23, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, CHIP, FIXED
Solicitation # SPE7M1-26-T-238F
This contract specifies the procurement of 42 units of a fixed chip resistor with part number TNPW121034K0BETA from VISHAY DALE ELECTRONICS, LLC, identified by NSN 5905-01-689-2990. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size. Packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-39032 for resistors, and MIL-STD-129, with special marking code ZZ-ZZ applying. The item must be delivered FOB origin within 84 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution San Joaquin warehouse in Tracy, California. The need ship date is November 3, 2026, and the original required delivery date is December 31, 2026. The unit of issue is each, priced at $42.00 per unit for a total value of $1,764. Transportation logistics follow DLA Procurement Notes C19 and C20, and all packaging must align with palletization standards outlined in RP001. The contract is issued under solicitation SPE7M1-26-T-238F, with responses due by August 10, 2026, and falls under NAICS code 334416 for electronic component manufacturing.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR
Solicitation # SPE7M0-26-T-023C
This contract is for the procurement of a single capacitor, identified by NSN 5910-01-220-1500 and part number 9-2847, with a required delivery within five days of contract award. The item must be delivered FOB origin and subject to inspection and acceptance at the destination. All packaging, preservation, and marking must comply with MIL-STD-2073-1E and MIL-DTL-39028 for capacitors, including adherence to MIL-STD-129 for labeling. The contractor is required to apply lead-free or lead-containing component markings per IPC/JEDEC J-STD-609 on each unit pack, with placement strictly following the standard’s guidelines. The contract explicitly prohibits intentional introduction of mercury or mercury-containing compounds into the hardware, except for specific applications like batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents authorized by NAVSEA; when present, such items must have shockproof construction and a second containment barrier per NAVSEA 5100-003D. Hazardous material shipping requirements follow IP025 guidelines, and the delivery address is Scholfield Barracks, Hawaii, with transportation governed by DLAD procedural notes C19 and C20. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date, and imposes zero variance tolerance on quantity. All provisions for configuration change management, deviation requests, and government identification removal are active and binding.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PAP
Solicitation # SPE7M1-26-T-238E
The contract is for the procurement of 56 units of a fixed paper-dielectric capacitor identified by NSN 5910-00-779-6646 and part number 7710252, sourced from approved suppliers including EXXELIA USA, INC. and HI-REL CAPACITORS INC. The item is subject to source-controlled drawing requirements, meaning only the listed manufacturers and their approved part numbers are acceptable, and all delivered units must fully comply with the specified drawing and technical standards. Packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including special labeling per IPC/JEDEC J-STD-609 to identify lead content, with all packaging coded as U and marked with the ZZ special requirement code. The delivery schedule requires shipment no later than February 3, 2026, with final delivery due in 67 days from the award date, delivered FOB origin to the designated receiving warehouse in Tracy, California. Inspection and acceptance occur at destination, with no variance allowed in quantity. All requirements are governed by the DLA Master List of Technical and Quality Requirements, and hazardous materials handling must follow DLAD PROC NOTE C19 and C20. The contract is issued under solicitation SPE7M1-26-T-238E with a unit price of $56.00 and a total value of $3,136.00, and is managed by the Department of Defense’s Maritime Supply Chain office.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
Solicitation # SPE7M5-26-T-357F
The contract specifies the procurement of one variable resistor with NSN 5905-00-907-9823 and part number 7017659304, governed by military specification MIL-PRF-94/5K Revision K dated 09/26/2022, and incorporates technical and quality requirements from the DLA Master List referenced in RA001. All supplies must comply with DLA packaging standards (RP001), including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special requirements indicating the use of marking code ZZ and adherence to IPC/JEDEC J-STD-609 for lead finish identification on each unit pack. The item is subject to qualified products or manufacturers lists (QPL/QML) as specified in RQ016, and qualification requirements in procurement note H02 apply. Delivery is required within 20 days FOB origin, with zero variance in quantity, and must be shipped by the fastest traceable means excluding parcel post to the delivery address at Fort Campbell, Kentucky. The unit is to be shipped in bulk using the break point code W80N5C, palletized per DLA requirements, and marked for government use with codes identifying the shipment, project, and contracting office. The required delivery date is July 27, 2026, with a response deadline of August 10, 2026, and this solicitation is for a federal acquisition under NAICS code 334416 with no setaside designation.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
Variable Resistor Manufacturing and SupplyThe contract calls for the manufacture and supply of 44 units of variable resistors identified by NSN 5905-12-386-6755, with strict adherence to military specifications governing packaging, labeling, and hazardous materials handling procedures. All units must meet exacting defense standards to ensure operational reliability and compliance in military environments. The award is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 334416 indicating the industry classification for electronic component manufacturing. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and performance is required at Tracy, California, with a zip code of 95304-5000. The contracting activity falls under the Active Devices Division of the Department of Defense, reflecting a focused procurement effort for critical electronic components.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
Ceramic Capacitor Supply (High-Reliability Electronic Component Manufacturing)The contract entails the supply of a single high-reliability fixed ceramic dielectric capacitor identified by NSN 5910013696366, manufactured to meet strict military specifications for packaging, labeling, and preservation to ensure operational integrity in demanding environments. This component is critical for defense-grade electronic systems and must be produced under controlled conditions that guarantee consistency, durability, and compliance with applicable defense standards. The solicitation, issued under the NAICS code 334416 for High-Reliability Electronic Component Manufacturing, is structured as a subcontract through the Department of Defense’s MARITIME SUPPLY CHAIN ESOC BUYS. The response deadline is August 10, 2026, with the performance location specified as Manchester, NJ 08759-0000. The contract is part of a broader effort to secure mission-critical electronic components through formal defense procurement channels, with all deliverables subject to rigorous quality control and documentation requirements to maintain supply chain integrity and accountability.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
Reactor Supply and DeliveryThe contract entails the supply, packaging, labeling, and delivery of a single reactor identified by NSN 5950011051219 to Robins Air Force Base in Georgia, with strict adherence to Department of Defense Logistics Agency packaging and marking standards. All aspects of the transaction including handling, containment, and identification must meet federal specifications to ensure compatibility with military logistics and inventory systems. The item is intended for use within defense infrastructure and must be delivered to the designated site with full compliance to regulatory and technical requirements to avoid rejection or delay. The contract is structured as a subcontract under the NAICS code 334416, which classifies it within the semiconductor and related component manufacturing sector. It was posted on July 28, 2026, with a formal response deadline set for August 10, 2026, allowing potential vendors a limited window to submit proposals. The overseeing organization is the Maritime Supply Chain ESOC Buys under the Department of Defense, indicating the procurement is part of a larger defense logistics initiative. The place of performance is clearly defined as Robins AFB with a zip code of 31098-1626, and all logistics must be arranged to meet this specific delivery point. The solicitation is accessible through the DIBBS platform for qualified contractors wishing to participate.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
Supply of Electrical Connectors with Hazardous Materials ComplianceThe contract requires the supply of a single electrical connector receptacle identified by NSN 5935012468773, with strict adherence to federal hazardous materials labeling, packaging, and safety data standards. The supplier is responsible for ensuring full compliance with hazard communication protocols and MIL-STD-129 requirements for marking and shipment documentation to meet Department of Defense logistics expectations. The item must be properly labeled, packaged, and transported to align with safety regulations governing hazardous materials, and all shipping materials must reflect the mandatory military marking specifications. This subcontract, issued by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office, was posted on July 28, 2026, with a response deadline of August 10, 2026. The place of performance is designated as Manchester with a ZIP code of 08759-0000, and the NAICS code 334416 applies to the manufacturing classification of electrical equipment and components. The contract does not specify a solicitation number or set-aside type, and no point of contact information is provided. Interested parties must access the full details through the provided DIBBS portal link to submit responses prior to the deadline.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
Power Transformer Manufacturing and SupplyThe contract requires the manufacture and delivery of power transformers designated by military NSN 5950-01-235-1971, ensuring full compliance with all applicable military specifications for performance, materials, and testing. The transformers must be packaged, labeled, and documented according to rigorous military standards, including cybersecurity protocols to safeguard against tampering, unauthorized access, or data compromise throughout the supply chain. All work must be executed by a qualified subcontractor capable of meeting stringent defense-grade quality controls and traceability requirements. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, under the NAICS code 334416 for electric lighting and electrical equipment manufacturing. The contracting entity is the Department of Defense, specifically the Maritime Supply Chain organization, with no set-aside classification specified. The place of performance and point of contact details are not provided, but the contract is accessible through the DIBBS system, indicating it is part of the broader Defense Logistics Agency procurement framework for mission-critical defense components.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-357P
The contract is for the procurement of eight antennas with NSN/part number 5985-99-671-2175 under solicitation SPE7M5-26-T-357P, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. Deliverables must be shipped within 225 days after contract award, and the place of performance is designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The offeror must submit a complete data package covering both the approved part and any alternate part, and the government’s identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the North American Industry Classification System code is 334220. Primary points of contact include Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245, with additional details accessible through the DIBBS portal linked in the contract data.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
ELECTRONIC MODULE, S
Solicitation # SPE7M5-26-T-357R
The contract pertains to the procurement of three electronic modules, identified by NSN 5963-20-001-8264 and part number 843-05, manufactured by Pivotal Power Inc, with delivery required within 84 days of contract award, FOB origin. The item is designated as an ESD-sensitive electronic device and must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specialized ESD and EMI protective materials per MIL-PRF-81705, requiring Type I barrier material for both ESD and EMI protection, with the supplier responsible for ensuring all packaging materials originate from qualified manufacturers listed on QPL-81705. Packaging must include adequate cushioning to prevent damage to pins and leads, and must be palletized according to DLA packaging standards RP001, with special marking code 39 indicating ESD sensitivity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the delivery point. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 334418, with a contract value of $9.00 for three units at $3.00 each, and the original required delivery date is May 3, 2027, with a need ship date of November 3, 2026. Compliance with all technical and quality requirements referenced in the DLA Master List is mandatory, governed by the revision in effect on the solicitation issue date.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-357T
The contract is for the procurement of three circuit breakers identified by NSN 5925-01-730-8062 and part number C10F3TM040 from Schneider Electric USA, Inc., under solicitation SPE7M5-26-T-357T, issued by the Department of Defense’s Active Devices Division. Delivery is required within 147 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The quantity is fixed at three units with no variance allowed, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 marking and RP001 palletization standards; non-hazardous items must meet ASTM D3951 unless overridden by a higher-priority DLA technical requirement. Hazardous materials must follow TQ requirement IP025 as defined by FED-STD-313. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds except in specified functional applications such as batteries, fluorescent lights, and weapon systems, and requires secondary containment for portable mercury-containing devices per NAVSEA 5100-003D. Class I ozone-depleting chemicals are banned entirely, and any alternative substances must be approved unless explicitly permitted by specification. The item is designated as a critical application item, and covered defense information requirements apply. All packaging and labeling must include the correct unit of issue and quantity per unit pack as specified, with delivery directed to the DLA Distribution facility at the provided address. The original required delivery date is January 18, 2027, with a need ship date of January 5, 2027.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-357M
The contract is for the procurement of six electromagnetic relays with NSN 5945-12-338-7533 and part number 390.10.0066 from Vincorion Power Systems GmbH, issued under solicitation SPE7M5-26-T-357M. Delivery is required within 20 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including marking as per MIL-STD-129 with special marking code ZZ-ZZ. The unit of issue is each, priced at $6.00, totaling $36.00. The contractor must apply lead status markings on each unit package in strict accordance with IPC/JEDEC J-STD-609, identifying lead content or Pb-free status, with placement governed by the standard’s section 6.2. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The end recipient is the Royal Jordanian Air Force, with shipment directed to Muwaffaq Salti AB, Jordan, under RDD 777 and governed by specific DLA transportation procedural notes. The delivery deadline is set for July 27, 2026, and the contract data includes a primary point of contact at DLA with email and phone details for inquiries.
Relay and Industrial Control Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M5-26-T-357W
This procurement contract is for a connector receptacle identified by NSN 5935012397761 and part number MS3452W14S-5SX, compliant with SAE AS34521C and SAE AS50151E technical standards. The item is classified as a qualified product requiring adherence to the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts. Strict prohibitions apply against the use of ozone-depleting substances in any phase of design, manufacturing, or testing unless written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are strictly banned except in specific functional applications such as batteries, fluorescent lights, sensors, or instrument controls, with additional containment requirements mandated. The item is designated as a critical application component subject to full and open competition, with no set-aside exceptions. The contract requires delivery of 22 units within 56 days, FOB origin, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must conform to MIL-STD-2073-1E with marking per MIL-STD-129 and no special marking codes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must comply with DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-357W, with a response deadline of August 10, 2026, and a required ship date of October 6, 2026. The unit price is $22.00 per unit, resulting in a total contract value of $484.00, and the North American Industry Classification System code is 334417. The primary point of contact is Margaret Smith of the Department of Defense’s Active Devices Division.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-Q-0786
The contract specifies the procurement of 1,481 electrical plug connectors with NSN 5935-01-492-5319 under solicitation SPE7M5-26-Q-0786, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 87 days after award, with inspection and acceptance occurring at the destination. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede all other standards including ASTM D3951. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 labeling, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025, while non-hazardous items must be commercially packaged. All packaging must be marked and labeled per specified guidelines, and palletization must meet DLA standards. The item must be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, with transportation governed by DLAD PROC NOTES C19 and C20. The contract imposes strict physical identification requirements, mandates removal of government identification from non-accepted supplies, and requires compliance with the DLA unit of issue standard, with the sole point of contact being Barbara Hoffmann of the Department of Defense’s Active Devices Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 221118
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-357K
The contract pertains to the procurement of circuit breakers under solicitation SPE7M5-26-T-357K, specifically for part numbers 2TC61-15 and L454C2001-3-011/L454C2001-3-023, with a total quantity of 10 units to be delivered to Dyess Air Force Base, Texas. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over commercial standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements. Sampling and inspection are mandated to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The items are classified as critical application components and must be shipped via traceable means, not parcel post, with delivery due within 20 days of contract award under FOB origin terms. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must adhere to Fed-Std-313 for hazardous materials, otherwise compliant with commercial standards as superseded by DLA directives. The contract is a Total Small Business Set-Aside with a NAICS code of 221118, and the sole point of contact is Matthew Stanko at the Department of Defense’s Active Devices Division. The required delivery date is July 27, 2026, and the NSN is 5925-01-225-9398.
Other Electric Power Generation

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
DUMMY LOAD, ELECTRIC
Solicitation # SPE7M5-26-T-357X
The contract specifies the procurement of nine electric dummy loads under NSN 5985-01-524-5383 for the Department of Defense’s Active Devices Division, with a delivery requirement of seven days after award. The solicitation number is SPE7M5-26-T-357X, issued on July 29, 2026, with responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The contract incorporates DLA packaging requirements and applies to covered defense information. A Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and the offeror must submit a complete data package for both the approved part and any approved alternate. Government identification must be removed from non-accepted supplies. Performance is localized to New Cumberland, Pennsylvania, with Samuel Cooper as the primary point of contact, reachable via email and phone provided. The NAICS code is 334220, and the procurement is classified as federal with no set-aside designation.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-26-T-357C
The solicitation seeks two electrical solenoids identified by NSN 5945-00-568-5560 under purchase request 7017669307, with a delivery requirement of 20 days after delivery order issuance. The contract is issued by the Department of Defense’s Active Devices Division under solicitation number SPE7M5-26-T-357C, with responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with deadlines tied to the solicitation issue or award date. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. Government identification must be removed from non-accepted supplies in accordance with RQ011. All technical, packaging, and quality standards referenced in the DLA Master List are binding and must be fully complied with. The point of contact for inquiries is Jeanette Heisey, with phone and email provided, and the solicitation is accessible via the DIBBS portal.
Relay and Industrial Control Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-357H
The contract pertains to the procurement of 18 circuit breakers with NSN 5925-01-188-4299 under solicitation SPE7M5-26-T-357H, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after award, with the solicitation posted on July 29, 2026, and responses due by August 10, 2026. The acquisition is subject to DLA packaging requirements and incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The place of performance is Dyess Air Force Base, TX, 79607-1510, and the primary point of contact is Matthew Stanko, reachable via email and phone. For simplified acquisitions, the master requirements in effect on the solicitation issue date govern, and the offeror must provide a complete data package including details for both the approved and alternate parts. No government identification may be removed from non-accepted supplies, and no alternate offeror data is currently available, requiring full submission from all proposers.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-357U
This contract specifies the procurement of a circuit breaker with NSN 5925017308059 and part number C10F3TM050 from SCHNEIDER ELECTRIC USA, INC., for a quantity of three units. Delivery is required within 147 days from the contract award, with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must fully comply with DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Non-hazardous items must be packaged per ASTM D3951, while hazardous materials must meet TQ requirement IP025 as defined by FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements. All supplied hardware must be free of intentionally added mercury or mercury compounds, except for specific exempted applications such as functional batteries, fluorescent lights, instruments, sensors, weapon systems, and chemically specified reagents, with portable devices containing mercury requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitutes require prior approval unless explicitly authorized by specification. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 5, 2027, and original delivery deadline of January 18, 2027. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and all technical and quality standards referenced in the DLA Master List supersede any conflicting commercial specifications.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details