42--RESPIRATOR OUTFIT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract solicitation SPE8E9-26-Q-0642 seeks 17 units of Respirator Outfit NSN 4240-01-363-4699 under a Total Small Business Set-Aside, with full compliance required from small business concerns as defined by FAR 19.5 and NAICS code 339113. Delivery must be completed within 60 days after order placement, with FOB Destination terms applying and inspection and acceptance occurring at origin per RQ009, in alignment with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria for all sampled lots unless otherwise specified. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, with unspecified attributes defaulted to major. The product is identified as a commercial item, and adequate competition data is deemed insufficient. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced in RA001, with SAE AS9100 mandates applying to both manufacturers and non-manufacturers. Packaging and marking must strictly follow RP001 and MIL-STD-129, including barcoding, lot and serial number labeling, contractor and manufacturer CAGE codes, and part numbers; hazardous materials require compliance with IP025, Federal Standard 313, and the Hazard Communication Standard with appropriate labels and Safety Data Sheets submitted prior to award. The contract incorporates a comprehensive set of FAR and DFARS clauses addressing small business representation, cybersecurity (52.204-21, 52.204-30 Alt I), whistleblower protections, labor standards, trafficking in persons, paid sick leave, and supply chain security. Special requirements include Defense Priorities and Allocations System (DPAS) ratings, heightened quality surveillance for critical safety items under H04, and mandatory hazardous material disclosures under 252.223-7001 and 52.211-5. Invoicing is only permissible through WAWF, and all submissions must be made via the DIBBS portal by the August 12, 2026 deadline. The contracting official is Tracey Marcus of DLA Troop Support, and no pricing information has
General Info
Contract Value
$307,761.03Place of Performance
PA, USASet-Aside
Awardee
S I T CORPORATIONAward Issued Date
Timeline
Organization & Contact Information
Full Description
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
ADEQUATE DATA FOR NSN/Part Number: 4240-01-363-4699 Quantity: 17 EA Purchase Request: 7017287560QTY: 17 Delivery: 60 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Same awarding agency
Earlier notices in this NAICS code
Posted before this notice, open and closed
Ready to Pursue This Opportunity?
Get AI-powered intelligence on this solicitation and the ones like it
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS