Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RESTORATIVE KIT, DENTAL

Active
SPE2DH-26-T-5581Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two kits of a dental restorative product, GC Fuji II LC Capsule, a light-cured resin-reinforced material designed for dental restorations. Each kit contains 24 capsules totaling 0.33 grams of powder and 0.085 milliliters of liquid per capsule, distributed across five shades: five each of A1, A2, A3, and B2, and four of C2. The product must have a minimum 24-month shelf life, with no more than three months elapsed between the date of manufacture and delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and include clear labeling of the manufacture date, expiration date, and contract or lot number. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier to the specified delivery point in Suffolk, Virginia, at the lowest possible rate. The kits must be marked according to MMS1A standards, and bidders are required to provide the source and part number being supplied. This procurement is governed by DLA’s Master List of Technical and Quality Requirements, and the NSN is 6520-01-644-3304, with a delivery deadline of five days after award.

General Info

Two dental restorative kits, GC Fuji II LC Capsule, five shades, 24 capsules each, 24-month shelf life, shipped to Suffolk, Virginia.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

DOORWAY 71, SUFFOLK, VA, 23435-5000, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5581.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESTORATIVE KIT,DENTAL
RESTORATIVE KIT,DENTAL
GC FUJI II LC CAPSULE; LIGHT-CURED<(>,<)>
RESIN-REINFORCED RESTORATIVE;
CONTAINS QUANTITY OF 24 CAPSULES
(5 EACH OF A1, A2, A3 AND B2 SHADES<(>,<)>
4 EACH OF C2 SHADES); 0.33 G POWDER<(>,<)>
0.085 ML LIQUID PER CAPSULE.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE: KIT (KT)
..
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
SPE2DH-26-T-5581
SECTION B
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE
LATEST REVISION OF MMS1A. LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-644-3304 Quantity: 2 KT Purchase Request: 7017638346QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339114
New
DIBBS
CALCIUM HYDROXIDE PASTCalcium Hydroxide Paste Dental is a radiopaque, antibacterial endodontic dressing with a high pH level of 12.5, supplied in 1.2 mL syringes as part of the Ultracal XS Kit. Each kit contains four 1.2 mL syringes and twenty assorted 29GA Navitip tips, with five of each length, designed for precise delivery during root canal treatments. The material is corrosive and must be stored at room temperature. The item has a non-extendable shelf life of 24 months and is classified as a Type I (Code M) item under DLA specifications. Packaging must comply with SPE2DH-26-T-5584 standards and applicable hazardous materials regulations including 49 CFR and ICAO guidelines. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6520-01-686-3975, with a purchase quantity of six kits, a delivery requirement of five days after delivery order, and a solicitation issued under contract number SPE2DH-26-T-5584 with a response deadline of August 4, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance and contact details centered in Suffolk, VA.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
AMALGAM ALLOY, CAPSULE,ZENITH PREMIUM DISPERSED PHASE AMALGAM ALLOY, CAPSULE, DENTAL is a high-strength, condensable dental alloy designed for long-lasting restorations with superior handling characteristics, available in regular and fast-setting formulations, supplied in units of 50 capsules per batch. The item is identified by NSN 6520-01-730-6230 and is procured under solicitation SPE2DH-26-T-5583 with a required delivery within five days of award. It carries a non-extendable shelf life of 120 months, in compliance with RS030 requirements, and is subject to DLA’s packaging and hazardous material standards as outlined in RD003, RP001, and RQ034. A current Material Safety Data Sheet (MSDS) must accompany each shipment and be electronically submitted via DLA.MSDS@DLA.MIL with the required cover sheet P-75 containing logistics data. Packaging must conform to 49 CFR and ICAO regulations for hazardous materials. The item is categorized under NAICS 339114 and is procured by the Department of Defense’s Medical Supply Chain FSH through the DLA, with Tina Vu as the primary point of contact. Removal of government identification from non-accepted supplies is required per RQ011, and the technical and quality specifications referenced are governed by the DLA Master List effective on the solicitation or award date.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL SURGERYThe contract is for the procurement of diamond burs used in dental surgery, specifically the BrioPrep Coarse Modified Flat-End Taper model identified by part number BRIO6845KR.31.025, supplied in sterile packages of 25 units per package. The item is identified by NSN 6520-01-717-0597 and requires delivery within five days of order placement. The burs feature a 19mm standard shank and a head size of 0.25mm, meeting technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA procurement standards, and suppliers must ensure removal of government identification from non-accepted items. The solicitation is issued under contract number SPE2DH-26-T-5591 with a response deadline of August 4, 2026, and the place of performance is listed as Suffolk, VA, 23435-5000. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, and inquiries should be directed to Tina Vu at the provided contact information. Bidders must clearly specify the source and part number being offered and acknowledge that covered defense information may apply to this procurement.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
FILE, ENDODONTIC, HANDThe product is a hand endodontic file made from stainless steel with a 25mm length and size 06, identified by a pink color-coded handle and featuring a safe-ended non-cutting batt tip with a twisted design manufactured from a square blank. Each file comes pre-inserted with a silicon stop and is pre-sterilized, sold in packages of six, with the unit of issue being the package. The item has a mandated shelf life of 60 months, and no more than nine months may have passed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, and the contract or lot number, all in compliance with the latest revision of MMS1C. Technical and quality requirements are governed by the DLA Master List, and the supplier must specify the source and part number being provided. The item is covered under NSN 6520-01-717-8504 with a quantity of four packages required for delivery within five days of award, under solicitation SPE2DH-26-T-5585, issued by the Department of Defense’s Medical Supply Chain FSH, with performance and point of contact details designated to Suffolk, Virginia, and Tina Vu as the primary contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
FILE, PULP CANAL, DENThis contract specifies the procurement of 36 sets of ready-steel K-files for endodontic use, each set containing six pre-sterilized stainless steel instruments with square cross-sections, sized 45 to 80 and measuring 25 millimeters in length. The files feature non-cutting safe-ended batt tips, pre-inserted silicon stops for depth control, and color-coded ergonomic handles designed for secure grip and precise tactile feedback during root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, these instruments are engineered for durability, sharpness, and resistance to fracture, making them suitable for high-demand clinical environments. The product is classified as a TYPE I (CODE S) item with a non-extendable shelf life of 60 months, and must comply with all DLA packaging, quality, and technical requirements as defined in the DLA Master List. The item is identified by NSN 6520-01-718-2167 and is subject to covered defense information protocols. Bidders are required to clearly state the source and part number being supplied. The solicitation is issued by the Department of Defense under the Medical Supply Chain FSH, with a response deadline of August 4, 2026, and delivery expected within five days of award to Suffolk, Virginia, 23435-5000.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
PACK, PROPHY DISPOSAThe contract is for the procurement of NUPRO Prophy Packs, medium mint, in quantities of 100 per box, with a total order of four boxes. Each pack includes a disposable prophy angle fitted with a soft cup and a pre-filled cup of NUPRO prophy paste. The unit of issue is a box containing 100 units, and the item is identified by NSN 6520-01-645-3922. A strict shelf-life requirement of 24 months applies, with no extensions permitted, as this is classified as a Type I (Code M) item. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to Covered Defense Information controls, and government identification must be removed from any non-accepted supplies. Bidders are required to specify the source and part number being offered. Delivery is due within five days of award, with performance addressed to Suffolk, Virginia, 23435-5000. The solicitation, issued under SPE2DH-26-T-5571, opened on July 28, 2026, and closes on August 4, 2026, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
MOUTHPIECE, SUCTION, DEN
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
RESIN ASSORTMENT, ACThe contract is for a resin assortment composed of acrylic dental self-curing material, supplied in 2-ounce dispensers across six shades, with the unit of issue being a package of six units. The item is identified by NSN 6520-01-119-6388 and has a mandatory shelf life of 36 months, which is non-extendable and governed by the RS001 requirement for Type I items. The procurement falls under simplified acquisition procedures, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Hazards associated with the material require compliance with the Hazardous Communication Standard and submission of a current Material Safety Data Sheet (MSDS), which must be electronically transmitted to DLA.MSDS@DLA.MIL with the required cover sheet and also physically included with each shipment. Packaging must conform to federal and international hazardous materials regulations, including 49 CFR and ICAO standards, and adhere to DLA packaging directives. Government identification must be removed from non-accepted supplies, and the item is subject to Covered Defense Information requirements. The contract solicitation was issued on July 28, 2026, with responses due by August 4, 2026, under solicitation number SPE2DH-26-T-5575. Delivery is required within five days of award, and the place of performance is Williamsburg, VA, 23185-5830, with Tina Vu of the Department of Defense’s Medical Supply Chain FSH serving as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTS, EN
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL, EXCAVATI
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
ETCH, BONDING AGENT, DEN
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 423450
New
DIBBS
DRAPE, SURGICALThe surgical drape is a nonwoven fabric item measuring 75 inches in length and 57 inches in width, individually packaged, fan-folded, and colored blue, designed for use in sterile surgical environments. It is supplied in units of issue as a package containing twenty drapes each, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is regulated by the FDA, and buyers are required to submit a referral in EBS with full manufacturer and bidder details for verification. Shelf life is strictly defined at 36 months with no extendability, and the item is classified as a TYPE I (CODE Q) item under RS001. The manufacturer is Cardinal Health 200, LLC, with part number 9349, and the NSN is 6530-01-173-2311. Delivery must be made within five days to the destination specified as JBER, Alaska, under FOB destination terms, with no tolerance for quantity variance. Inspection and acceptance occur at the point of delivery, and packaging must conform to MIL-STD-2073-1E. The solicitation number is SPE2DH-26-T-5593, issued by the Department of Defense through the Medical Supply Chain FSH, with a response deadline of August 4, 2026, and Tina Vu listed as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 453998
New
DIBBS
MANIKIN, RESCUE, SPECThe contract specifies the procurement of two rescue manikins, each standing five feet five inches tall and weighing 105 pounds, constructed with a cast vinyl body and a five-sixteenth inch steel frame, featuring articulated joints and anatomically distributed weight to simulate human movement and balance for training purposes. The unit of issue is each, and the items must comply with stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced via RQ and RP identifiers, ensuring adherence to federal procurement standards. The manikins are issued under NSN 6910-01-362-2996, with delivery required within 20 days of award, and the purchase is tied to request number 7017305237. The solicitation, issued under SPE2DH-26-T-5602, was posted on July 28, 2026, with responses due by August 4, 2026, and falls under the NAICS code 453998. The contracting activity is managed by the Department of Defense’s Medical Supply Chain FSH, with performance taking place at FPO, ZIP 96657-2615, and primary point of contact being Joseph Rucci via email and phone provided. All non-accepted supplies must have government identification removed in accordance with RQ011, and the applicable version of the DLA Master List is controlled by the solicitation issue date.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
GOWN, HOSPITAL PATIENTThe contract specifies the procurement of 10 hospital patient gowns in size large, designed as unisex garments made from cotton/polyester fabric with an overlap back and back ties, featuring butterfly sleeves and engineered for intravenous use. Each gown is sold as a single unit, and bidders must clearly indicate the source and part number being supplied to ensure compliance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Government identification must be removed from any supplies that are not accepted. The item is identified by NSN 6532-01-434-3880 under purchase request 7017631850, with a delivery requirement of 20 days after order. The solicitation number is SPE2DH-26-T-5559, posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity is managed by the Department of Defense under the Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu via email and phone provided.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TEST TUBE, BLOOD COLLECThe contract specifies the procurement of 2 packages of glass blood collecting test tubes, each package containing 100 units, for use exclusively with the QBC STAR centrifugal hematology analyzer. Each unit must have a shelf life of nine months, and no more than two months may have elapsed from the date of manufacture to the date of delivery to the government. Labels on the product must include the NSN 6640-01-587-9896, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract number with lot number. The items are not regulated by the FDA. Packaging must comply with Commercial packaging standards and Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a container that prevents damage and breakage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Norfolk, Virginia. Bidders must clearly state the source and part number being supplied. The solicitation incorporates technical and quality requirements from the DLA Master List, and applicable provisions include packaging, removal of government identification from non-accepted supplies, and potential coverage under defense information regulations. Delivery is required within 20 days of award under solicitation SPE2DH-26-T-5377, with responses due by July 28, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339113
New
DIBBS
CYLINDER, UNGRADUATED, LThe contract specifies the procurement of three ungraduated laboratory cylinders, each with a capacity of 600 milliliters, constructed from borosilicate glass, featuring an outer diameter of 51 millimeters and an internal height of 360 millimeters. The item is identified by NSN 6640-01-459-4425 and is to be delivered within 20 days of award under purchase request 7017665906. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE2DH-26-T-5598, issued on July 28, 2026, with responses due by August 4, 2026. The contracting activity falls under the Department of Defense’s Medical Supply Chain FSH, with performance to be delivered to FPO, ZIP 96632. Tina Vu of DLA serves as the primary point of contact, reachable via email and phone listed in the documentation. The NAICS code 339113 confirms the classification for laboratory glassware manufacturing.
Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTICThis contract pertains to the procurement of POINT ENDODONTIC GUTTA PERCHA POINTS, specifically model 120S, which are color-coded, assorted in sizes 45 to 80, and measure 30 millimeters in length, supplied in boxes of 120 units each. The item is identified by NSN 6520-01-643-3521 and is being requested in a single box quantity under purchase request 7017649745, with a delivery requirement of 20 days ADO. The solicitation, issued under number SPE2DH-26-T-5606, was posted on July 28, 2026, with proposals due by August 4, 2026, and falls under NAICS code 456199 for other health care services. The contracting authority is the Department of Defense, through the Medical Supply Chain FSH, with delivery to APO 09094-3219. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Covered defense information may apply, and bidders must specify the source and part number being offered. Government identification must be removed from non-accepted supplies, and bids must be submitted with full product details to meet procurement compliance.
All Other Health and Personal Care Retailers

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
SHEET, LIFT-DRAWThe contract is for the procurement of disposable lift-draw sheets, specifically white synthetic spunlace material measuring 80 inches by 40 inches, designed for safe patient transfer from hospital beds to gurneys or stretchers. These sheets must be highly absorbent yet not waterproof and capable of supporting up to 1300 pounds, with a unit of issue consisting of 50 sheets per package. Three packages are required under purchase request 7017631831, and delivery must be completed within 20 days after award. The NSN and part number are 6530-01-503-8750, and bidders must clearly state the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5551, was posted on July 28, 2026, with responses due by August 4, 2026, and is governed by DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The place of performance is Fort Bliss, Texas, 79918-2527, with point of contact Tina Vu at DLA. The contract falls under NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details