RESTRAINT, INVOLUNTA

RESTRAINT,INVOLUNTA
RESTRAINT, FULL BODY CUFF (FBR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
DESIGNED TO SECURELY TRANSPORT PRISONERS WHEN MOBILITY IS REQUIRED. THE
HANDS ARE RESTRAINED AT THE HIPS ON A WAIST BELT WITH CUFFS ATTACHED TO
A NYLON STRAP THROUGH A BUCKLE WHICH ALLOWS ONE OR BOTH HANDS TO BE
EXTENDED UP TO APPROXIMATELY 14 INCHES USING A HANDCUFF KEY OR BE
RETRACTED BACK TO THE HIPS BY PULLING ON THE NYLON RESTRAINT STRAP. THE
LEG OR LEGS ARE RESTRAINED WITH A NYLON STRAP LOOP PASSING THROUGH A
BUCKLE, THAT IS DOUBLE LOCKABLE, AND THROUGH ANOTHER BUCKLE WHICH MAY
THEN MAY BE ATTACHED TO THE WAIST BELT. THE SECOND BUCKLE ALLOWS THE LEG
OR LEGS TO BE EXTENDED, WITH THE USE OF A HANDCUFF KEY, SO THE SUBJECT
MAY WALK OR SIT, OR RETRACTED UP TO IMMOBILIZING THE SUBJECT, BY PULLING
ON THE STRAP. WAIST BELT FITS 29 TO 58 INCH WAISTS. WEIGHT = 6 POUNDS.
STANDARD KEYS USED TO REVERSE SINGLE AND DOUBLE LOCK.
DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE
FOLLOWING:
LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG
FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE
STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A
SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS
SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,
CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL
BE A 13 DIGIT
NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT
CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC"
MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A
MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY
VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE
LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.
NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED
UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON
WHICH THE NSN APPEARS.
THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:
BAR CODE OMITTED OR NOT READABLE BY SCANNER
HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE
NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM
NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG USE TYPE VII
(PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.
IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE
TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.
SPE1C1-26-T-1775
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
LTL VANTAGE, INC. 3FFD1 P/N SLMP1-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018426027 0001 EA 25.000
NSN/MATERIAL:8465015148739
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W91DSG
0096 MP HHC HHC MILITARY PO
FALLBROOK ARMY RESERVE TRNG CENTER
1000 TOW ROAD
FALLBROOK CA 92028-0000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91DSJ
SPE1C1-26-T-1775
SECTION B
PR: 7018426027 PRLI: 0001 CONT’D
0096 MP HHC HHC MILITARY PO
FALLBROOK ARMY RESERVE TRNG CENTER
1000 TOW ROAD
FALLBROOK CA 92028-0000
US
MARKFOR
W91DSJ
0096 MP HHC HHC MILITARY PO
FALLBROOK ARMY RESERVE TRNG CENTER
1000 TOW ROAD
FALLBROOK CA 92028-0000
US
M/F: (TCN) W91DSJ62610002
RDD:
PROJ: TP 3
SUPP ADD: W806BY SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: MT
Need Ship Date:00/00/0000 Original Required Delivery Date:09/23/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018426100 0001 EA 5.000
NSN/MATERIAL:8465015148739
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE1C1-26-T-1775
SECTION B
PR: 7018426100 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W91DSG
0096 MP HHC HHC MILITARY PO
FALLBROOK ARMY RESERVE TRNG CENTER
1000 TOW ROAD
FALLBROOK CA 92028-0000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91DSJ
0096 MP HHC HHC MILITARY PO
FALLBROOK ARMY RESERVE TRNG CENTER
1000 TOW ROAD
FALLBROOK CA 92028-0000
US
MARKFOR
W91DSJ
0096 MP HHC HHC MILITARY PO
FALLBROOK ARMY RESERVE TRNG CENTER
1000 TOW ROAD
FALLBROOK CA 92028-0000
US
M/F: (TCN) W91DSJ62610003
RDD:
PROJ: TP 3
SUPP ADD: W806BY SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: MT
Need Ship Date:00/00/0000 Original Required Delivery Date:09/23/2026
SPE1C1-26-T-1775
SECTION B
PR: 7018426100 PRLI: 0001 CONT’D

SPE1C1-26-T-1775 NSN/Part Number: 8465-01-514-8739 Quantity: 25 EA Purchase Request: 7018426027QTY: 25 Delivery: 20 days ADO