Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on March 9, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Restricted Sources: SIKORSKY AIRCRAFT CORPORATION (CAGE 78286) and SPS TECHNOLOGIES, LLC (CAGE 56878)

Closed
SPE4A7-22-R-X258Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722
New
DIBBS
BOLT, EYE
Solicitation # SPE4A6-27-T-5815
Solicitation SPE4A6-27-T-5815 is a Request for Quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of four eye bolts (NSN 5306-00-159-5362). Designated as critical application items, the bolts must be manufactured according to basic drawing NR 80064 2584025 Revision J and reference drawing NR OMLM6 2584542 Revision AA. The required delivery date is August 18, 2027, with a need ship date of April 20, 2027, for delivery to DLA Distribution Albany in Georgia. This is not a small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone concerns. The contract mandates strict quality and security compliance, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Technical data is subject to ITAR or EAR export controls, and contractors must meet CMMC Level 2 and DFARS 252.204-7012 cybersecurity standards for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Additionally, the government will not evaluate or award offers involving items produced via additive manufacturing. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-27-T-6249
Solicitation SPE4A6-27-T-6249 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of self-locking plate nuts (NSN 5310015971830). The requirement is divided into three delivery locations: DLA Distribution Barstow, DLA Distribution Albany, and DLA Distribution New Cumberland, with a total combined quantity of 1,503 units. Delivery is specified as FOB Origin under the First Destination Transportation program, with a general delivery lead time of 220 days and required delivery dates extending through October and November 2027. The items are classified as critical application commercial hardware and must be manufactured in accordance with the current revision of the applicable part standards, specifically referencing MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with palletization following DLA requirement RP001. This procurement is not a small business set-aside, although a price evaluation preference is available for HUBZone Small Business Concerns. Offerors must comply with the Buy American Act and Berry Amendment restrictions and represent that they will not provide covered telecommunications equipment. All quotes must be submitted electronically via the DIBBS portal, and successful contractors will be required to use the Wide Area WorkFlow system for invoicing and payment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-27-T-6088
Solicitation SPE4A6-27-T-6088 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 48 socket head cap screws, identified by NSN 5305-01-597-3671. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The procurement is managed under the First Destination Transportation program, with a need ship date of April 20, 2027, and an original required delivery date of July 27, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and safety standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Mercury or mercury compounds are strictly prohibited in all packaging and preservation. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls per DFARS 252.225-7048, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, offerors must comply with the Buy American Act and Berry Amendment restrictions, and provide disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the DIBBS system for quote submission. Inspection and acceptance will occur at the destination based on zero-non-conformance sampling plans. The solicitation also incorporates cybersecurity requirements, including DFARS 252.204-7012 and CMMC Level 2 standards, and prohibits the use of covered telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-6430
Solicitation SPE4A6-27-T-6430 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of close tolerance screws, identified as NSN 5305008284612 and part number NAS1152E4. This is a critical application commercial item. The requirement is for 86 packages, with each package consisting of 50 pieces. Delivery is required by March 21, 2027, with a need ship date of April 6, 2027, shipped FOB Origin to DLA Distribution Warner Robins in Georgia. The contractor must adhere to strict quality and technical standards, including TDP Rev A Gen 1 and the current revision of the applicable part standard. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) with every shipment and dimensional conformance inspection for Class 3A and 3B threads per System 22 of FED-STD-H28/20. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with zero non-conformances required for acceptance. Packaging and marking must comply with MIL-STD-129, MIL-STD-130N, and ASTM D3951, with DLA Master List requirements taking precedence. This solicitation is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small businesses. Offerors must comply with the Buy American Act, the Berry Amendment, and various cybersecurity regulations, including DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A6-27-T-5979
Solicitation SPE4A6-27-T-5979 is a Request for Quotations issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of 16 key washers, identified by NSN 5310-01-066-3928. These items are designated as critical application items and must be manufactured according to specific technical drawings, including Basic Drawing 19207 12274522 Revision F. The delivery is required within 264 days after order, with a need ship date of July 22, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and requiring sampling per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment. Inspection and acceptance will occur at the destination per FAR 52.246-2.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days

General Info

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Richmond, VA, 23297, USA

Set-Aside

NONE

Documents

1
PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts2 people available
OfficeRICHMOND, VA, 23237, USA
Office AddressRICHMOND, VA, 23237, USA

Full Description

Show more
Multiple NSNs for a Strategic Long-Term Contract for SPS TECHNOLOGIES, LLC., CAGE 56878. This agency proposes to issue a solicitation for a long-term strategic, sole source contract which will include multiple NSNs / FSCs. A total of 28 NSNs are targeted for this contract effort. It is anticipated that 28 NSNs will be priced for the initial contract award. The proposed action is intended to be awarded on a sole source basis as supported by a J&A IAW FAR 6.302-1. The proposed sole source contract will be issued for and/or on behalf CAGE 78286, Sikorsky Aircraft Corporation, and CAGE 56878, SPS Technologies, LLC. The proposed contract will be for a total five-year period of performance (1-year base and four (4) one-year options to extend the terms of the contract). Letters expressing interest in subcontracting provided to the contracting officer will be forwarded to the identified OEM. This is proposed to be a FAR part 15 effort. The proposed contract will be an Indefinite Quantity Contract, firm fixed price contract in accordance with FAR 16.504(a)(1) with an Economic Price Adjustment (EPA). The list of NSNs are the items that have been identified for this current action. If other NSNs are subsequently added, as defined by the terms of the contract, they will be synopsized separately. (SEE ATTACHMENT) It is the Government's intent to post the solicitation to DIBBS. Surplus dealers are also invited to respond to this synopsis. The response should include a completed surplus certificate, DLAD 52.211-9000, Government Surplus Material or adequate traceability documentation to show that the product is acceptable. (Note: Other Aviation sites will provide their equivalent surplus clause, as applicable). Responses to this announcement from other than the OEM should identify items of interest and include evidence of ability to supply the items for the contract period as identified. In addition, respondents should identify the quantity available and price. A copy of the letter of interest should be forwarded to the contracting officer identified herein and SBA PCR (contact@example.gov). The Government may alter the acquisition strategy if purchase of existing surplus or newly manufactured inventory is in the best interest of the Government. In order to receive an award, regardless of dollar value, you must be registered in the System for Award Management (SAM). Annual updates to your registration will be required. For registration procedures and information please visit the World Wide Web at https://www.sam.gov. A copy of the solicitation will be available via DLA DIBBS Website at https://www.dibbs.bsm.dla.mil/ on the issue date cited in the Request for Proposal (RFP). RFPs are in a portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper copy of the solicitation will not be available to requestors. The solicitation issue date is on or around April 1, 2022.

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS