Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RESTRICTOR UNIT, FLU

Active
SPE7M3-26-T-8591Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 268 fluid flow restrictor units under solicitation SPE7M3-26-T-8591 for the Department of Defense Fluid Handling Division. The assembly requires the stainless steel orifice plate part number MS18301-09, though the gasket part number MS18301-03 is not required for full assembly. The items must adhere to basic specification MS18301C revision C and comply with strict environmental regulations, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Delivery is required within 57 days of order, with a need ship date of November 1, 2026. The shipment is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. This acquisition is set aside for Service-Disabled Veteran-Owned Small Businesses.

General Info

Procure 268 fluid flow restrictors for DoD by November 1, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326122 - Plastics Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SDVOSBC

Documents

(1)

SPE7M3-26-T-8591.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
QUINNICE DAVIS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESTRICTOR UNIT,FLU
RESTRICTOR UNIT, FLUID FLOW.
requires both the stainless plate part DASH Number 09 but not the gasket DASH Number 03 for full assembly. both the stainless steel orifice plate and the gasket
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
TDP Rev A Gen 1 IAW BASIC SPEC NR MS18301C(1) REVISION NR C DTD 10/19/2021 PART PIECE NUMBER: MS18301-03ANDMS18301-09
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M3-26-T-8591
SECTION B
PR: 7015538192 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015538192 0001 EA 268.000
NSN/MATERIAL:4730002166152
DELIVERY (IN DAYS):0057
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/01/2026 Original Required Delivery Date:11/01/2026
SPE7M3-26-T-8591 NSN/Part Number: 4730-00-216-6152 Quantity: 268 EA Purchase Request: 7015538192QTY: 268 Delivery: 57 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326122
New
DIBBS
ADAPTER, STRAIGHT, TU
Solicitation # SPE7M3-26-T-8585
This contract is a solicitation for the procurement of 21 straight tube adapters, identified by NSN 4730-01-583-7271. The items must be manufactured by an accredited manufacturer or assembled by an accredited distributor listed in the PRI Qualified Manufacturer List or Qualified Products List. Technical specifications are governed by SAE AS1037H and SAE AS4841D, and the contract strictly prohibits the use of Class I ozone depleting chemicals. The delivery is set for 164 days after order, with a required delivery date of March 10, 2027, to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Inspection and acceptance will take place at the destination, and the shipment is designated as FOB Origin.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
LATERAL, PIPE
Solicitation # SPE7M3-26-T-8594
This contract is a solicitation for the procurement of nine lateral pipes, identified by NSN 4730-01-685-1595 and part number M1183/6-42-G. The items are classified as critical application items and must adhere to technical specifications MIL-DTL-1183/6A and MIL-DTL-1183K. The agreement prohibits the use of Class I ozone depleting chemicals and requires strict compliance with DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. The order is issued under solicitation SPE7M3-26-T-8594 by the Department of Defense Fluid Handling Division. Delivery is set for FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is March 10, 2027, with a need ship date of February 16, 2027, and a delivery window of 164 days after order.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
RETAINER, COUPLING
Solicitation # SPE7M0-26-T-035G
This contract is a request for quotations issued by the Defense Logistics Agency under solicitation number SPE7M0-26-T-035G for 37 units of a critical application item identified as a RETAINER, COUPLING with NSN 4730-01-660-0115 and part number L3HARRIS TECHNOLOGIES, INC. 82340 P/N 2010052-1. The procurement is a total small business set-aside under NAICS code 326122 and must be submitted via the DLA Internet Bid Board System with a response deadline of August 20, 2026. Delivery is required within 165 days after order receipt, with an original required delivery date of October 26, 2027, and FOB Origin terms apply. All items must be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 guidelines, with the unit of issue specified as each and quantity per unit pack defined in the purchase order. The item is classified as a critical application item and is subject to stringent quality and environmental controls. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be submitted for approval unless already authorized by specification. Sampling and inspection are governed by MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned specific verification levels or AQLs; any unspecified attributes are treated as major. Acceptance requires zero non-conformances if MIL-STD-105/ASQ Z1.4 is used for sample size determination. Destination inspection and acceptance are required under FAR 52.246-2, and failure to comply with inspection criteria or quality requirements may result in rejection. Offers that include items produced via additive manufacturing are ineligible for award, and submission of Safety Data Sheets and hazard warning labels is mandatory prior to award. The contractor must affirm representations in SAM, including small business status and compliance with prohibitions on covered defense telecommunications equipment. Payment must be processed electronically
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 326122
New
DIBBS
RESTRICTOR, FLUID FL
Solicitation # SPE7M3-26-T-8137
The contract involves the procurement of a single porous polyethylene fluid flow restrictor, part number 2621-126-01-SUB-MK-182, with a 20-micron pore size, intended for use in the SSN 774 GMS system and compatible with both gas and liquid applications. The item is identified by NSN 4730-01-687-2859 and delivered under a fixed-price solicitation issued as a total small business set-aside by the Defense Logistics Agency’s Fluid Handling Division. Delivery is required within 20 days of award to FPO AE 09583, with FOB destination terms and destination inspection mandated. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container codes, and labeling, while hazardous materials must be marked in accordance with 29 CFR 1910.1200. The restrictor is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access to technical data is restricted to contractors with approved JCP certification and completed DLA export-controlled data training. The contractor must submit a Safety Data Sheet prior to award to be considered responsible, and all deliverables must comply with DLA packaging and marking standards, including palletization per RP001. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors and adherence to FAR 252.204-7012 for safeguarding covered defense information. The contract mandates the use of WAWF for electronic invoicing and receiving report submissions, with payment routing details to be specified in the award. Offerors must maintain current SAM representations, affirm small business status, and confirm compliance with Buy American, Berry Amendment, and prohibitions on covered defense telecommunications equipment. All quotes must be submitted through DIBBS by August 20, 2026, with the potential for automated award if qualifying conditions are met.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-326E
The contract solicitation SPE7M4-26-T-326E is for the procurement of one unit of a metal tube assembly identified by NSN 4710016985793 and part numbers 396-6461 and FT1897 from CATERPILLAR INC, with delivery required within 20 days of order receipt to Fort Bliss, Texas, under FOB origin terms. The item is subject to stringent technical and quality requirements dictated by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. All packaging and labeling must conform to MIL-STD-129, palletization must follow RP001 DLA Packaging Requirements, and the unit of issue and quantity per unit pack are strictly defined. Inspection and acceptance occur at the destination per FAR 52.246-2, and the contractor must ensure compliance with hazardous material labeling per 29 CFR 1910.1200 and radioactive material marking requirements per MIL-STD-129 if applicable. The solicitation mandates submission of Safety Data Sheets prior to award, with failure to do so resulting in disqualification. The contract incorporates numerous DFARS and FAR clauses governing cybersecurity, including the requirement for a CMMC Level 2 self-assessment and compliance with 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. Additionally, clauses related to employment eligibility, human trafficking, equal opportunity, sustainable products, and export controls are binding. The contractor must maintain current representations in the System for Award Management and comply with electronic invoicing via WAWF, submitting both invoice and receiving report. Shipment must be traceable and cannot use parcel post. The solicitation is a small business set-aside and may be awarded automatically based on lowest price technically acceptable, with HUBZone price evaluation preference applied. Payment, administrative, and contracting office details are provided, with primary point of contact Rory O’Reilly at DLA Land and Maritime Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 326122
New
DIBBS
TEE, TUBE
Solicitation # SPE7M3-26-T-8589
This solicitation by the Department of Defense Fluid Handling Division is for the procurement of 16 units of TEE, TUBE, identified by NSN 4730-00-729-5445. The contract requires delivery within 86 days after order and is categorized under NAICS code 326122. Performance is designated for Robins Air Force Base. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and CMMC Level 2 certification. Notably, the contract contains technical data subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
Federal
C900 Plastic Irrigation Pipe Supply
W07V Endist Memphis

POSTED

about 22 hours ago

DEADLINE

in 28 days
View Details
NAICS: 326122
New
Federal
PVC Irrigation Pipe
Solicitation # W912EQ26BA004
The U.S. Army Corps of Engineers in Memphis, TN, has issued an Invitation for Bid under solicitation number W912EQ26BA004 for the procurement of PVC irrigation pipe. This requirement is designated as a total small business set-aside under NAICS code 326122. The performance of the contract is located in Hazen, Arkansas, and the procurement is managed through the Department of Defense. Interested parties must submit their responses via email no later than the deadline of September 22, 2026, at 2:00 PM. Bids must be clearly marked with the solicitation number and directed to the designated points of contact, including Tommye Sepulveda, Kirk A. Middleton, or TiJuana Harris. It is the sole responsibility of the offeror to ensure that their quote is received by the specified date and time.
W07V Endist Memphis

POSTED

about 22 hours ago

DEADLINE

in 28 days
View Details
NAICS: 326122
New
Federal
NOAA NWFSC Seawater System Plumbing Supplies
Solicitation # 1333MF26Q0090
The Northwest Fisheries Science Center at the Manchester Research Station is requesting quotes for plumbing components to repair and operate a flowing seawater system used for aquaculture research. The requirement includes various PVC schedule 80 pipes, fittings, and specific Asahi/America actuators for 24-inch valves. All products must comply with Buy American requirements, and the successful vendor must provide verification of the country of manufacture. This is a single-award, firm-fixed-price purchase order to be awarded to the lowest-priced, technically acceptable bidder on an all-or-none basis. Delivery is required FOB Destination to Port Orchard, Washington, within 90 days of the award. Quotes must be submitted electronically to the designated contracting officer by 1700 EDT on August 31, 2026, and bidders must have an active registration in the System for Award Management.
Department Of Commerce Noaa

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 326122
New
Federal
47--COUPLING HALF,QUICK
Solicitation # SPE7M326T8499
DLA Land and Maritime is soliciting quotes for the procurement of 44 units of quick coupling halves, identified by NSN 4730016701869. The approved source for this requirement is 21392 52884-911-40. Delivery is required to DLA Distribution San Joaquin within 328 days after the order is placed. This request for quotation, numbered SPE7M326T8499, is open to all responsible sources and must be submitted electronically by August 31, 2026. No hard copies of the solicitation, specifications, plans, or drawings are available. The procurement falls under NAICS code 326122 and is managed by the Department of Defense office located in Columbus, Ohio.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 326122
New
SLED
161168 HDPE Pipe
Solicitation # IFB-126761
The Virginia Department of Transportation is soliciting bids under IFB-126761 for the procurement of Type S High Density Polyethylene HDPE pipe, including various sizes of joints and gaskets. This contract is specifically intended to support the VDOT Richmond District, with the place of performance covering the various counties and cities located within that district. Interested parties must submit their responses by the deadline of August 31, 2026, at 2:00 PM. The solicitation was officially posted on August 19, 2026, and inquiries regarding the procurement can be directed to the point of contact, Tracey Higgins.
Virginia Department of Transportation

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 326122
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-26-T-8335
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of a single sediment strainer identified by NSN 4730-01-680-7870. The procurement is categorized under NAICS code 326122, which pertains to plastics product manufacturing. The solicitation is identified by number SPE7M3-26-T-8335 and was officially posted on August 19, 2026. Interested parties must submit their responses by the deadline of August 31, 2026. The contract is a federal solicitation, and inquiries regarding the specific requirements or technical details should be directed to the designated buyer via the contact information provided in the official solicitation documents. All procurement activities are managed through the Defense Logistics Agency's procurement systems.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK DI
Solicitation # SPE7M3-26-T-8588
Solicitation SPE7M3-26-T-8588 is a federal request from the Department of Defense Fluid Handling Division for seven units of a Quick Disconnect Coupling Half, identified by NSN 4730-00-729-5736. The delivery requirement is 160 days after order, with a response deadline of September 4, 2026. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. The contract prohibits the use of covered telecommunications equipment and additive manufacturing unless specifically authorized. All contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Small business joint ventures must provide specific representations and certifications, and those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to avoid requirement cancellation.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-364G
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 69 O-rings under NSN 5331-01-350-3175. The contract requires delivery within 150 days after receipt of the order and specifies that all items must be free of asbestos. Performance is centered in Tracy, California, with the response deadline set for September 4, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards and special oxygen cleaning and packaging in accordance with MIL-STD-1330. Additionally, the contract mandates inspection and acceptance at the origin and incorporates guidelines for configuration change management and the handling of covered defense information.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
COUPLING, SHAFT, FLEXIBL
Solicitation # SPE7M4-26-T-362Z
This contract is for the procurement of 11 flexible shaft couplings, identified by NSN 3010-01-046-1953. These critical application items feature a bonded rubber design with an overall length of 4.125 inches and an outside diameter of 4.625 inches. The couplings include specific bore diameters and keyway dimensions for both ends, with the first end measuring 1.3750 inches and the second end measuring 0.8750 inches. Approved part numbers include General Electric 1405M66P01 and Emerson Power Transmission 2297836 or 30EEFB. The agreement specifies a delivery timeframe of 164 days, with a required delivery date of November 17, 2026, and a need ship date of February 16, 2027. Shipping is FOB Origin with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. Compliance is required for DLA packaging standards, MIL-STD-129 marking, and strict prohibitions against the intentional addition of mercury or mercury-containing compounds.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE TO BOSS
Solicitation # SPE7M3-26-T-8570
This contract is for the procurement of 1,945 steel tube-to-boss elbows featuring a zinc chromate finish and a 90-degree flow angle. The components transition from a 1/2 inch nominal OD tube size to a 3/8 inch nominal OD tube size and are classified as critical application items. Technical specifications are governed by SAE J1453-3 and SAE J1453-1-2012 standards. Due to the inclusion of O-rings, the items have a non-extendable shelf life of 180 months. The agreement specifies that inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Delivery is required within 168 days, with a need ship date of February 16, 2027, and a final required delivery date of March 23, 2027, to DLA Distribution San Joaquin in Tracy, California.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE7M4-26-T-364B
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of 21 machine screws under NSN 5305014080413. The requirement specifies part number 1647715-8 from Mission Systems Davenport Inc. Delivery is required within 164 days, with a need ship date of February 16, 2027, and an original required delivery date of May 11, 2027. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination. The supplier must adhere to strict packaging and labeling standards, including ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. All technical and quality requirements are governed by the DLA Master List. Shipments are to be directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The solicitation is identified by number SPE7M4-26-T-364B and falls under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-363L
This contract is for the procurement of 193 fluid filter elements under solicitation SPE7M4-26-T-363L, identified by NSN 2940014798459. The requirement is set aside for Service-Disabled Veteran-Owned Small Businesses and specifies parts from Pacific Consolidated Industries LLC or Brighton Cromwell LLC. Delivery is required within 127 days, with a need ship date of January 10, 2027, and a final delivery destination at DLA Distribution Depot Hill in Utah. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Environmental restrictions are in place prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The items are designated as critical application items, and inspection and acceptance will occur at the destination.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-363T
Solicitation SPE7M4-26-T-363T is a federal request from the Department of Defense Fluid Handling Division for 11 units of a non-metallic hose assembly, identified by NSN 4720-01-008-7036. The delivery requirement is 186 days after receipt of order, with a response deadline of September 4, 2026. Offerors must provide manufacturer CAGE codes and source details, and are encouraged to submit quantity ranges to accommodate potential demand volatility. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a representation that no covered telecommunications equipment will be provided. Small business joint ventures must submit specific representations and certifications. Additionally, all contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
SLEEVE, FLARED, TUBE FIT
Solicitation # SPE7M4-26-T-363J
This contract is for the procurement of steel flared tube fitting sleeves with a .312 inch nominal tube size, conforming to SAE aerospace standards for 37 degree flared fluid connections. The items are designated as commercial products and must be produced by an accredited manufacturer or distributor listed on the PRI Qualified Manufacturer List or Qualified Products List. The contract prohibits the use of Class I ozone depleting chemicals and requires adherence to specific sampling methods, such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans for acceptance. The requirement consists of two line items totaling 531 units under NSN 4730-00-433-33375, with delivery specified as 189 days after order. Shipping is FOB Origin with inspection and acceptance occurring at the destination. Deliveries are split between DLA Distribution Depot Oklahoma at Tinker AFB and the DDSP New Cumberland Facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, FUEL PRE
Solicitation # SPE7M4-26-Q-0982
This contract is for the procurement of three fuel pressure tube assemblies, identified by NSN 4710-01-125-2833 and part number 74A586734-1003. The item is designated as a critical application item associated with The Boeing Company and Northrop Grumman Systems Corporation. The agreement is established as a firm fixed price contract with a delivery timeline of 273 days after order. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA master list requirements taking precedence. Government furnished property tooling located at AMARG may be required to support production. Inspection and acceptance will occur at the destination, with shipments directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
PLUG, ROTARY, VALVE
Solicitation # SPE7M4-26-T-361U
This contract is a solicitation for the procurement of 14 rotary valve plugs, identified by NSN 4820013151045 and associated with Leslie Controls part numbers 24573N and N695300058. The order is managed by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-361U. Delivery is required within 140 days, with a specified need ship date of January 19, 2027, and a final required delivery date of December 4, 2028. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a critical prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Quality and technical requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7M4-26-T-327L
The contract is for a Parts Kit, Engine Fuel Fuel Pump with NSN 2910-00-355-7669, quantity of 190 units, under solicitation SPE7M4-26-T-327L, issued by the Defense Logistics Agency’s Fluid Handling Division as a Total Small Business Set-Aside under NAICS code 333618. Delivery is required within 191 days of order placement, with an original delivery date of April 6, 2027, and a need-to-ship date of February 28, 2027. Items are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with no variance allowed in quantity. The unit price is $190.00 per unit, totaling $36,100, paid via Wide Area WorkFlow using an Invoice and Receiving Report for this fixed-price supply contract. The kit involves casting or forging components, and if the contractor lacks required tooling, they must contact DLA for assistance. Packaging and preservation must strictly comply with MIL-STD-2073-1E Appendix D for kits, with all marking, labeling, and barcoding per MIL-STD-129, including no special marking designation. Palletization must follow DLA’s RP001 packaging requirements. The contractor must implement cybersecurity measures per CMMC Level 2 Self-Assessment and safeguard covered defense information as required by DFARS 252.204-7012, along with compliance to NIST SP 800-171 through a DoD assessment. The contract includes clauses prohibiting hexavalent chromium, ensuring hazardous material handling per OSHA, prohibiting covered telecommunications equipment, and enforcing whistleblower rights, employment eligibility verification, combating trafficking, and equal opportunity for workers with disabilities. Offerors must be registered in SAM with a valid UEI and CAGE code, certify as a small business, and provide affirmations regarding subcontracting and cyber compliance. All proposals must be submitted electronically through DIBBS by August 20, 2026, with no physical submissions accepted. Inspection and acceptance occur at the delivery point, and the contractor assumes full responsibility for compliance with all technical, quality, and regulatory requirements referenced in the DLA Master List of Technical and Quality Requirements.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details