Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RESUSCITATION KIT, MOUT

Active
SPE2DS-26-T-259YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The resuscitation kit is a pediatric-specific, latex-free Brosewell Hinkle system designed for emergency use, containing a complete set of essential resuscitation components including two procedural modules in seven pouches, a Broselow tape, two manual resuscitators, four cuff masks, three disposable blood pressure cuffs, one gauge, two Magill forceps, and two laryngoscope handles. It is configured as a comprehensive mouth-to-mask or oronasal resuscitation solution intended for rapid deployment in critical care scenarios. The kit must have a minimum 24-month shelf life, with no more than three months elapsed from the date of manufacture to the date of government delivery, ensuring freshness and operational readiness upon receipt. Each kit is identified by NSN 6515-01-513-9276 and must be labeled with the manufacturer’s name and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The kit complies with DLA packaging requirements and technical standards referenced under RA001, RP001, and RQ011, ensuring adherence to federal procurement protocols. The contract solicitation number is SPE2DS-26-T-259Y, with a 20-day delivery window following award, and the item is to be delivered to Binghamton, NY, under a federal acquisition by the Department of Defense, Medical Supply Chain, as part of a single-unit purchase under purchase request 7017570635.

General Info

Pediatric resuscitation kit, latex-free, 24-month shelf life, NSN 6515-01-513-9276, delivered to Binghamton, NY.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

85 WEST END AVE, BINGHAMTON, NY, 13905-3855, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-259Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
RESUSCITATION KIT,MOUTH-TO-MASK,ORONASAL
RESUSCITATOR KIT<(>,<)> MOUTH TO MASK, ORONASAL, PEDIATRIC
EACH KIT SHALL CONTAIN THE FOLLOWING COMPONENTS:
26 PROCEDURAL MODULES IN 7 POUCHES, FLYING CARPET<(>,<)>
BROSELOW TAPE, 2 MANUAL RESUSCITATORS, 4 CUFF
MASKS, 3 DISPOSABLE BLOOD PRESSURE CUFFS, 1 GAUGE<(>,<)>
2 MAGILL FORCEPS, AND 2 LARYNGOSCOPE HANDLES.
SHALL BE A LATEX-FREE BROSELOW HINKLE PEDIATRIC
RESUSCITATION SYSTEM FOR USE IN EMERGENCY
SITUATIONS.
UNIT OF ISSUE: EACH (EA)
.
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN THREE MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
LABELS SHALL INCLUDE:
NSN
MANUFACTURER AND CAGE
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-513-9276 Quantity: 1 EA Purchase Request: 7017570635QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
END PLUG, VISCOMETER
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
BOTTLE, SCREW CAP
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
Federal
Procurement of commercial biotechnology research suppliesThe contract is for the procurement and installation of office furniture for the NSA Naples N8 new office facility located in Building 442 (Admin I), specifically in rooms 200, 201, 202, 205, and 206. The scope includes supply of desks, ergonomic chairs, bookcases, wardrobes, cabinets, meeting tables, and associated electrical integration with built-in wiring featuring 10 wire options, independent neutral, duplex outlets, and split circuits with isolated grounds. All furniture must be delivered and installed to meet strict aesthetic requirements: Areas 1 and 2 must be styled as an executive professional office in dark walnut, while Areas 3 through 7 must be professional office environments in American walnut. Installation must ensure all components are level, plumb, square, and properly aligned, with all storage units lockable and keyed alike. Contractors must submit detailed Computer-Aided Design (CAD) drawings, 2-D and 3-D design documents, axonometric views, floor plans in PDF format, and a comprehensive Bill of Materials. The contract requires on-site project management, assembly, disassembly of systems furniture, keying of locking components, and touch-up of any nicks or scratches during installation. All materials must be received, inspected, stored, and handled by the contractor prior to and during installation, and any substandard items must be replaced at no cost. Delivery is due within 60 days after receipt of order, with a firm delivery target of September 15, 2026, under FOB Destination terms to Naval Support Activity Naples, FPO AE 09622-0000. Pricing is firm-fixed-price denominated in Euros, exclusive of Italian VAT, and must include all packaging, transportation, and delivery costs to the final destination in Naples, Italy. The solicitation, issued under NAICS code 337214 with solicitation number N6817126QN050, is unrestricted and requires offerors to be registered in the System for Award Management (SAM) with an active Unique Entity Identifier and CAGE code. Proposals must be submitted electronically in two volumes: Volume I detailing technical capability with manufacturer catalogs, design documentation, floor plans, bill of materials, and delivery schedule; and Volume II containing a completed and signed Standard Form 1449 with pricing. Technical capability is evaluated on a pass/fail basis, with only acceptable proposals considered
Navsup Flc Sigonella Naples Office

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 423450
New
SLED
Supply of Fitness and Conditioning EquipmentNorthside ISD is seeking qualified suppliers to deliver a range of fitness and conditioning equipment for use in school physical education programs, including jump ropes, cones, agility ladders, resistance bands, exercise mats, and other portable training tools. The contract is structured as a subcontract under NAICS code 423450, which pertains to wholesale trade of sports and recreational goods, and the response deadline is August 12, 2026, with the solicitation posted on July 21, 2026. Equipment must meet appropriate educational and safety standards to support daily PE activities across multiple school sites within the district. The place of performance and delivery logistics are to be determined by the vendor in coordination with Northside ISD, and all proposals must be submitted through the BonfireHub portal prior to the deadline. No set-aside provisions are specified, making this opportunity open to all eligible businesses.
Northside Isd

POSTED

about 23 hours ago

DEADLINE

in 21 days
View Details
NAICS: 423450
New
DIBBS
Industrial Goggles Supply and Delivery
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
BAG, URINE COLLECTIONThe contract is for a urine collection bag with a 2000 CC capacity, featuring 182.88 cm (72 inch) tubing and a 400 mL urine meter with a white background and graduated markings, including a small burette chamber and a spring-loaded sample port designed for use with a Foley catheter. The package includes a Foley tray and a 10 CC prefilled syringe in 18 French size with a 5 CC capacity, supplied as a disposable unit in packages of ten. The item is identified by NSN 6515-01-406-7748, with a quantity of two packages required, under purchase request 7017553324, and delivery must be completed within 20 days of award. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring that each unit is sealed and protected against damage and that shipping containers guarantee safe delivery at the lowest cost to the specified point of performance at Scott AFB, 62225-5252. The solicitation is issued under SPE2DS-26-T-255A with a submission deadline of July 27, 2026, and incorporates referenced technical and quality requirements from the DLA Master List, requiring bidders to specify the exact source and part number being offered. Compliance with DLA packaging and marking directives is mandatory for all medical acquisitions under this solicitation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOHThe contract specifies the procurement of heavy-duty, puncture-resistant sterilization biohazard disposal bags in red or orange color to indicate contamination, intended for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package containing 200 bags, and the material must comply with medical marking standard no. 1, superseding MIL-STD-129, with packaging required to be commercial and secure, using sealed unit containers and suitable shipping containers that ensure safe delivery at the lowest carrier rate. The supplies are subject to DLA packaging requirements and technical quality standards referenced in the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition type. The NSN 6530-01-078-0365 is associated with two approved manufacturers, MEDEGEN MEDICAL PRODUCTS, LLC and BAXTER HEALTHCARE CORP, and the delivery is scheduled for five days FOB destination with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E. The solicitation, issued under SPE2DH-26-T-5368, has a response deadline of July 28, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
LIDOCAINE HYDROCHLOLidocaine Hydrochloride and Epinephrine, USP, is a parenteral injectable pharmaceutical product containing a 2 percent concentration of lidocaine hydrochloride and a 1:50,000 dilution of epinephrine bitartrate, supplied in 1.7 mL single-dose cartridges. The unit of issue is a package of 50 cartridges, each contained within cardboard boxes featuring five blisters of ten cartridges each. The product must be stored at controlled room temperature below 25°C (77°F), protected from light, and must not be frozen. It is regulated by the FDA and requires a prescription. The item has a non-extendable shelf life of 18 months and must be marked in full compliance with Medical Marking Standard No. 1, superseding all prior references to MIL-STD-129. Packaging and shipping must meet commercial standards, with each unit sealed and protected in suitable containers to ensure safe transport via common carrier, and all exterior containers must meet federal logistics requirements. The procurement is issued under contract SPE2DP-26-T-4213 with a solicitation posted on July 21, 2026, and responses due by July 27, 2026. The quantity required is one unit of issue (50 cartridges), with delivery required within five days of award to the destination at Joint Base Elmendorf-Richardson, Alaska. Delivery is FOB destination and subject to zero variance in quantity. Inspection and acceptance occur upon delivery. The item is classified under NSN 6505-01-576-2767, with procurement reference PR 7017548713. All technical and quality requirements referenced in the DLA Master List are incorporated by reference, and the product must be sourced from approved manufacturers including Dentsply Sirona Inc. with NDC 66312-0181-16. Government use requires adherence to all applicable defense logistics standards, including transport protocols and marking instructions, with a designated point of contact and official delivery address provided for coordination.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
COAT, MAN'S PAJAMAThe contract is for a man’s pajama coat, specifically a full-length, broadcloth style made of cotton and polyester with a snap fastener front, in blue overall color, offered as a single unit. It is identified by NSN 6532-00-081-1802 and requested in a quantity of one unit under purchase request 7017546134, with delivery required within five days of award. The solicitation, issued under number SPE2DH-26-T-5360, was posted on July 21, 2026, with a response deadline of July 28, 2026, and falls under NAICS code 423450 for wholesale trade in apparel and accessory merchandising. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and all non-accepted supplies must have government identification removed prior to return. The offering agency is the Department of Defense, specifically the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
SHEET, LIFT-DRAWThe contract specifies the procurement of a disposable lift-draw sheet measuring 80 inches by 40 inches, designed for safe patient transfer between hospital beds and gurneys or stretchers. Made from highly absorbent synthetic spunlace material, the sheet is not waterproof but is engineered to support up to 1300 pounds, ensuring durability during medical transfers. Each unit of issue consists of a pack of 50 sheets, and bidders must clearly identify the source and part number being offered. The item is identified by NSN 6530-01-503-8750, with a single pack requested under purchase request 7017568893 and a delivery requirement of five days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5383, issued on July 21, 2026, with responses due by July 28, 2026, and the place of performance is Fort Bragg, NC 28310. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
SHOES, SHOWERThe contract is for the procurement of adult shower shoes featuring a cross strap to secure the footwear, a 0.750 inch sole, medium size, black color, and synthetic rubber material with non-slip properties. The item is packaged in units of 72 pairs per package, with a single package ordered under the NSN 6532-01-469-7512. The purchase request number is 7017566649, and delivery must be completed within 20 days after order award. The solicitation is issued under contract number SPE2DH-26-T-5381, released on July 21, 2026, with responses due by July 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for simplified acquisitions. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. The placing agency is the Medical Supply Chain FSH under the Department of Defense, with performance required at Fort Leonard Wood, Missouri. Primary point of contact is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
CYLINDER, GRADUATED, LABThe contract specifies the procurement of two graduated laboratory glass cylinders, each with a 100 ml capacity, calibrated to deliver, measuring 29 mm wide by 255 mm high, featuring a single scale and pour-out mouth. The item is identified by NSN 6640-00-420-0000 and must be supplied in accordance with commercial packaging standards as defined in DLA Packaging Requirements for Procurement, ensuring each unit is sealed in a container that protects against breakage and damage. Shipments must be packed in suitable commercial exterior containers that ensure safe and cost-effective delivery to the specified point of performance in Norfolk, Virginia, with compliance to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the solicitation number is SPE2DS-26-T-257N. Bidders must provide the source and part number being supplied, and all deliveries are required within 20 days of award. The procurement is under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with Lisa Thomas-Wright as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
BANDAGE, GAUZE, SELF-The contract pertains to the procurement of self-adherent gauze bandages, 3 inches by 4 yards in length, made of cotton elastic material, individually packaged, and supplied in cases of 16 rolls each. The product is black in color and must comply with all technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to the latest DLA packaging standards, and all items must be marked in accordance with the Medical Marking Standard No. 1, including proper identification of the NSN and part number: 6510-01-522-7376. Bidders are required to specify the source and part number being offered, and all non-accepted supplies must have government identification removed prior to delivery. The contract is solicited under SPE2DS-26-T-259X, with a response deadline of July 28, 2026, and requires delivery within 20 days of award to Fort Bliss, Texas. The purchasing agency is the Department of Defense, Medical Supply Chain, and the point of contact for inquiries is Anh Lam.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
BAG, RECLOSABLEThe contract specifies the procurement of 15 packages of white block reclosable polybags, each package containing 1,000 units for a total of 15,000 bags. Each bag measures 3.0 inches by 4.0 inches, is made from 2-mil thick high-clarity 100 percent virgin polyethylene, and features a zip lock closure with a white labeling area on the front. The packaging must comply with commercial standards as outlined in the procurement document, with each unit securely sealed in a protective container to prevent damage or breakage. All shipments must be packed in commercial exterior containers suitable for safe transport by common carriers at the lowest possible rate, ensuring delivery to the specified point of performance at Fort Bliss, Texas, within 20 days of award. All items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must adhere to applicable DLA packaging requirements and technical quality standards referenced in the DLA Master List. The solicitation number is SPE2DS-26-T-259T, the NSN is 6515-01-500-5746, and responses must include the supplier’s source and part number. The solicitation closes on July 28, 2026, and is issued under a federal acquisition framework with a NAICS code of 339112 for medical device manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL, EXCAVATIThis contract solicits dental excavating instruments with tungsten carbide heads, size 4, in packages of ten, identified by NSN 6520-01-003-2270, for delivery within 20 days. The specifications are governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all supplies must be free of intentional mercury or mercury-containing compounds unless explicitly exempted for functional components like batteries, fluorescent lights, or specialized instruments, which must meet additional safety criteria including shockproof construction and secondary containment as per NAVSEA 5100-003D. Bidders are required to provide the source and part number of the product being offered, and the delivery is for a single package to a military postal address. The solicitation, issued by the Department of Defense’s Medical Supply Chain under office SPE2DS-26-T-260M, closes on July 28, 2026, and is subject to potential handling of covered defense information under applicable security protocols.
Dental Equipment and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SHIELD, EYE, SURGICALThe contract specifies the procurement of four units of SHIELD, EYE, SURGICAL, a rigid combat eye shield designed for surgical use, each containing a FOX eye shield, a 6-inch hydrogel disc, and two 4x4 inch gauze pads. The product is vacuum-sealed, sterile, and measures 4 x 2 x 0.25 inches weighing 0.5 ounces. It is classified as a TYPE I (CODE Q) item with a non-extendable shelf life of 36 months. All units must be individually sealed in appropriate containers to prevent damage and packed in commercial exterior shipping containers that ensure safe, cost-effective delivery to Wright Patterson AFB, Ohio, with delivery due within 20 days of award. Packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must provide the source and part number being supplied. The item is identified by NSN 6515-01-590-2668 under solicitation SPE2DS-26-T-260F, subject to DLA’s Master List of Technical and Quality Requirements, and falls under NAICS code 339113. Government identification must be removed from non-accepted supplies, and covered defense information may apply. The solicitation was posted July 22, 2026, with a response deadline of July 28, 2026, and the primary point of contact is Chandler Alvarez of the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
THERMOMETER, CLINICAL, HA clinical-grade, non-contact infrared thermometer designed for human use is being procured to measure forehead temperature in adults, children, and infants without physical contact, ensuring improved hygiene and reduced risk of cross-contamination. The device delivers instant, accurate temperature readings in one to two seconds and can switch between ambient and skin surface temperature modes with a simple toggle, making it suitable for diverse medical environments. No probe covers are required, further streamlining usage and reducing waste. The unit is sold individually, with seven units being ordered under NSN 6515-01-687-1199, to be delivered within five days of award. The procurement is governed by technical and quality requirements from the DLA Master List, packaging standards, and protocols for removing government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-259R on July 22, 2026, has a response deadline of July 28, 2026, and is managed by the Department of Defense’s Medical Supply Chain, with performance located at JBPHH, HI 96853-5256 and primary point of contact Ryan Kane.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FILTER, RESPERATOR, MThe contract is for the procurement of bacterial and viral respiratory filters labeled FILTER, RESPERATOR, M, manufactured by VYAIRE MEDICAL INC with part number 001853. Each unit features a 22mm male/female and 22mm female ISO connector, a hydrophobic polypropylene high-efficiency design, a 59ml compressible volume, and is latex-free. The unit of issue is a case (CS) of 50 units, with a total quantity of three separate line items each for two cases, totaling six cases. The product is regulated by the FDA and must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements. All units must be sealed in commercial packaging suitable for safe transport and protection from damage, with palletization following DLA guidelines. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the destination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The contract references solicitation number SPE2DS-26-T-260G with an original required delivery date of July 23, 2026. The shipping destination is Ramstein, Germany, with a parcel post address in APO AE, and the point of contact is James Burke. The NSN is 6515-01-688-3936, and pricing is set at $2.00 per case for all line items.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPLINT, HAND
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SENSOR, TEMPERATURE
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE, CATHETER TI
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
BABYPOWDER, CORNSTAR
Toilet Preparation Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
HOSE ASSEMBLY, OXYGEN
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details