This Solicitation opportunity from Department Of Defense was posted on October 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RETAINER, NUT AND BOLT

Closed

SPE7L1-27-T-0939Federal

Submission Closed10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332994

New

DIBBS

Supply of FN Herstal Gun Mount PedestalThis subcontract involves the procurement and delivery of one FN Herstal S.A. gun mount pedestal, specifically part number 3634200650 and NSN 1010131231283, to support prime contractors fulfilling DLA supply contracts. The scope of work requires the contractor to perform marking and labeling according to MIL-STD-129 and provide comprehensive quality assurance documentation to meet Critical Application Item standards. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 332994. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture of Warning Streamer / Ground Safety Pins

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supplier of Automatic Gun Barrels (NSN 1005-00-787-9802)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Small Arms Cartridge FollowerThis subcontract involves the manufacturing of small arms cartridge followers for prime contractors supporting the Defense Logistics Agency. The contractor is responsible for fabricating components that strictly adhere to NSN 1005013589718 specifications and DLA Master List technical requirements. Production must be carried out using precision machining, as the use of additive manufacturing is explicitly prohibited for this project. Compliance requirements are stringent, necessitating a CMMC Level 2 self-assessment and adherence to the Buy American Act, the Berry Amendment, and Category I Demilitarization standards. The performance of the contract will take place in Austin, Texas, with a response deadline set for November 9, 2026. The final deliverable is the completed cartridge follower meeting all specified defense standards.

Defense Logistics Agency

POSTED

DEADLINE

Supply of XM40 Riot Control Agent Simulator DispersersThis subcontract with the DLA Weapons Support Land Supply Chain involves the manufacture or procurement of 229 XM40 Riot Control Agent Simulator Dispersers for Department of Defense prime contractors. The provider must ensure all hardware meets NSN 1040-01-501-4423 specifications, conduct origin inspections, and coordinate testing witnessed by government representatives. Performance will take place in New Cumberland, Pennsylvania. Strict regulatory and security standards apply to this engagement, including mandatory CMMC Level 2 certification and full compliance with ITAR, EAR, and the Buy American Act. Additionally, the contractor is responsible for the specialized handling of UN1950 hazardous materials. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fiberlock (NSN 5342-01-052-1023)This subcontract involves the manufacture or procurement of 313 Fiberlock hardware units under NSN 5342-01-052-1023 for prime contractors supporting the DLA Weapons Support ASC. The selected provider must ensure all items are inspected according to MIL-STD-1916 or ASQ H1331 and adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packing and marking. Final delivery of the inspected units is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania. To qualify for this contract, the supplier must maintain SAE AS9003 or ISO 9001 certification and demonstrate full compliance with ITAR and EAR regulations. The project falls under NAICS code 332994 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Small Arms Storage Rack ManufacturingThis subcontract involves the manufacture and supply of a single small arms storage rack for prime contractors supporting DLA Weapons Support. The fabrication must strictly adhere to the technical and quality requirements specified under NSN 1095-01-561-5431 and RA001. To ensure regulatory compliance, the provider must follow the Buy American Act and the Berry Amendment, and the use of additive manufacturing is prohibited without explicit authorization. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this requirement categorized under NAICS code 332994.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Combat Knife Production and SupplyThis subcontract involves the manufacture and supply of 2,580 combat knives for prime contractors supporting the Department of Defense DLA Weapons Support Strategic Acq Program Directorate. The required products must meet NSN 1095-01-466-8569 and correspond to specific part numbers from Benchmade, Fiskars, or Hogue. The contractor is responsible for ensuring strict adherence to RA001 technical requirements and DLAD Procurement Note C03 for supply chain traceability. This opportunity falls under NAICS code 332994, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2273

Solicitation SPE4A7-27-T-2273 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 313 units of Fiberlock, identified by NSN 5342-01-052-1023. The contract is established as FOB Origin with a required delivery date of December 31, 2026, and a need ship date of February 12, 2027, for delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict quality and inspection standards, requiring inspection and acceptance at the origin. Manufacturers must comply with SAE AS9003 or ISO 9001 standards, and sampling shall follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. The contract includes significant regulatory requirements, including export controls under ITAR and EAR, and prohibits the use of additive manufacturing unless specifically authorized. Environmental compliance is mandatory, specifically the prohibition of mercury or mercury-containing compounds in hardware and packaging per IP056. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. Administrative processes, including invoicing and receiving reports, are to be managed through the Wide Area WorkFlow system. Additionally, the solicitation incorporates the Buy American Act and DFARS regulations regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2897

Solicitation SPE7L1-27-T-2897 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 20 ammunition chutes, identified by NSN 1005-01-646-5943. The items must be manufactured in accordance with Basic Drawing NR 30003 3392AS622, Revision dated November 25, 2014. Delivery is required within 178 days after receipt of order, with a specified need ship date of May 7, 2027. The place of performance and delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, utilizing First Destination Transportation to optimize shipping costs. This contract contains stringent regulatory requirements, including demilitarization standards for small arms weapons and parts under DODM 4160.28-Vol.3 and export controls governed by ITAR and EAR. Technical data access is restricted to DLA contractors with approved US/Canada Joint Certification Program certification and completed export-control training. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Packaging and marking must adhere to ASTM D3951 and MIL-STD-129, while electronic invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2894

Solicitation SPE7L1-27-T-2894 is a request for quotations from the DLA Weapons Support Land Supply Chain for 153 units of trigger extensions (NSN 1005-01-040-8836). Designated as a critical gun part, the item is classified as a defense article subject to ITAR and the Arms Export Control Act, requiring manufacturers to register with the Directorate of Defense Trade Controls. The procurement is a total small business set-aside with a delivery deadline of February 14, 2028, shipping FOB Origin to Tracy, California. Technical requirements specify the use of manganese coating if an option for zinc is provided and prohibit the use of Class I ozone-depleting chemicals. Quality assurance is stringent, requiring contractor first article testing and product inspection by the DCMA QAR at the manufacturer's facility. Certificates of conformance are not authorized, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract incorporates various FAR and DFARS clauses, including CMMC Level 2 certification, Wide Area WorkFlow for invoicing, and strict adherence to the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0696

Solicitation SPE7L4-27-T-0696 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of one gun mount pedestal, identified as NSN 1010131231283 and part number 3634200650 from FN Herstal S.A. This item is designated as a critical application item and does not have a shelf life requirement. The required delivery date is August 13, 2027, with a delivery period of 276 days after order. Delivery is FOB Origin, and the destination for both inspection and acceptance is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Contractors must provide supply chain traceability documentation per DLA Directive Procurement Note C03. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Invoicing must be processed through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, via the DIBBS portal, and the government may apply a HUBZone price evaluation preference during the award process.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 12 days

AI Contract Overview

Solicitation SPE7L1-27-T-0939 is a request for the procurement of float barrel nut retainers, identified by NSN 5340-00-649-8486 and part number NAS578-7B. The requirement is split into two line items totaling 1,738 units, with 807 units destined for DLA Distribution Cherry Point and 931 units for DLA Distribution San Diego. The items are defined by a military or consensus non-government part standard, and they are designated as critical application items. Delivery is required within 116 days after receipt of order, with a need ship date of February 19, 2026, and an original required delivery date of May 31, 2027. Shipping is FOB Origin, while inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with FED-STD-313 and TQ requirement IP025. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331. The procurement is subject to domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Evaluation preferences are available for certified HUBZone small businesses, and the government will not consider items produced via additive manufacturing. All quotes must be submitted through the DIBBS portal by October 23, 2026, and payments will be processed electronically via the Wide Area WorkFlow system.

General Info

Procurement of 1,738 critical float barrel nut retainers for DLA distribution centers.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories Manufacturing

Place of Performance

PR: 7018679491 PRLI: 0001 CONT’D, CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

RFQ SPE7L1-27-T-0939

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedOct 12

Solicitation

Response DeadlineOct 23

Deadline has passed

Submission Closed

10/23/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressUSA

Contacts

ISABELLE SZULEWSKI

contact@example.gov

+1 (555) 000-0000

Full Description

RETAINER,NUT AND BOLT
RETAINER
(RETAINER, FLOAT BARREL NUT)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SPE7L1-27-T-0939
SECTION B
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS578 REVISION NR 11 DTD 02/28/2023 PART PIECE NUMBER: NAS578-7B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018679491 0001 EA 807.000
NSN/MATERIAL:5340006498486
DELIVERY (IN DAYS):0116
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
SPE7L1-27-T-0939
SECTION B
PR: 7018679491 PRLI: 0001 CONT’D
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:02/19/2026 Original Required Delivery Date:05/31/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018679491 0002 EA 931.000
NSN/MATERIAL:5340006498486
DELIVERY (IN DAYS):0116
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE7L1-27-T-0939
SECTION B
PR: 7018679491 PRLI: 0002 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:08/20/2025 Original Required Delivery Date:05/31/2027
SPE7L1-27-T-0939 NSN/Part Number: 5340-00-649-8486 Quantity: 807 EA Purchase Request: 7018679491QTY: 1738 Delivery: 116 days ADO