Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Rexford Industrial Project

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Rexford Industrial Project involves the demolition of two existing industrial warehouse buildings totaling 89,870 square feet and the construction of a new 138,972 square foot industrial warehouse at 14830 Carmenita Road in Norwalk, California, on a 7.03-acre lot. The new facility will include 132,227 square feet of warehouse space, 3,715 square feet of ground floor office space, and 3,030 square feet of mezzanine space, along with a parking lot, ornamental landscaping, and associated infrastructure. The project is being managed under the oversight of the City of Norwalk, which serves as the lead agency responsible for environmental review and approval under the California Environmental Quality Act (CEQA). The development requires compliance with local stormwater regulations, air quality standards including SCAQMD Rules 402, 403, and 1113, CalOSHA safety requirements, and the implementation of Best Management Practices for pollution control. LEED Gold certification under CalGreen standards is also required, alongside adherence to municipal codes governing noise, vibration, and land use. The construction timeline spans from September 2025 through October 2026, with key milestones including demolition by late September 2025, site preparation and grading through November 2025, building construction through September 2026, and paving and architectural coating completed by October 2026. Environmental documentation, including a Mitigated Negative Declaration, must be submitted electronically and in 15 hard copies to the City of Norwalk’s Community Development Department. The project’s environmental risks, including exposure to extreme heat, wildfire, sea level rise, and air quality degradation, have been assessed using a vulnerability scoring methodology, though these evaluations are for regulatory compliance and not procurement evaluation. No formal contract value, pricing structure, or federal acquisition regulation clauses are specified in available materials, and no procurement method such as LPTA or best value is stated. Key contacts include Kristy Wong, Associate Planner at the City of Norwalk, Ben Martin as the applicant, and Brandon Wolfe as the project manager. No federal contracting elements such as CAGE codes, UEI identifiers, socioeconomic certifications, or payment and invoicing details are included, indicating this is a locally administered development project rather than a federal procurement.

General Info

Demolish two warehouses, build 138,972 sq ft industrial facility in Norwalk, CA, with LEED Gold certification by October 2026.

Agency

California → City of Norwalk

NAICS

236210 - Industrial Building ConstructionView NAICS

Place of Performance

Carmenita Road and Excelsior Drive, Norwalk, CA, 90650

Set-Aside

NONE

Documents

(17)

Noise Impact Analysis for 14830 Carmenita Road Warehouse Project

PDFnoise-impact-analysis

Appendix I Preliminary Low Impact Development Plan for Rexford Expansion Project

PDFsow

Recirculated Notice of Intent for Rexford Industrial Project

PDFspecial-notice

SCH #2024101066 Rexford Industrial Project Notice of Completion

PDFnotice-of-completion

Notice of Determination for Rexford Industrial Project Precise Development Plan No. 2023-06

PDFnotice-of-determination

Revised Health Risk Assessment for 14830 Carmenita Road Project

PDFhealth-risk-assessment

Appendix J Hydrology Report for Rexford Expansion Project

PDFhydrology-report

Paleontological Assessment for Rexford Expansion Project

PDFpaleontological-assessment

Notice of Determination for Precise Development Plan No. 2023-06 Rexford Industrial Project

PDFnotice-of-determination

Cultural Resources Study for the Rexford Expansion Project

PDFcultural-resources-study

Revised Air Quality, Energy, and GHG Memorandum for 14830 Carmenita Road Project

PDFtechnical-memorandum

14830 Carmenita Road Warehouse Project Recirculated Draft MND

PDFmitigated-negative-declaration

Appendix C Historic Resources Assessment for Rexford Expansion Project

PDFhistoric-resources-assessment

SCH 2024101066 Rexford Industrial Project Summary Form

PDFenvironmental-summary

Appendix L Trip Generation and VMT Screening Analysis for 14830 Carmenita Road

PDFtechnical-memorandum

Appendix H Subsurface Investigation Report - Norwalk CA

PDFreport

Subsurface Investigation Report for Industrial Property Norwalk CA

PDFreport

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

Posted

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → City of Norwalk
Contacts3 people available
OfficeN/A
Organization / Agency
California → City of Norwalk
Office AddressN/A
Contacts
Kristy WongAssociate Planner
Brandon WolfeProject Manager

Interested Companies (1)

Show more
EPD Solutions
Irvine, CA

Full Description

Show more
The project applicant proposes to demolish two existing multi-tenant industrial warehouse buildings totaling 89,870 SF and to construct an approximately 138,972 SF industrial warehouse building with a parking lot, ornamental landscaping, and associated infrastructure on the 7.03-acre lot. The proposed building would be inclusive of 132,227 SF of warehouse space, 3,715 SF of ground floor office space, and 3,030 SF of mezzanine space. The proposed project is located at 14830 Carmenita Road.

Similar Contracts

Same NAICS industry code

NAICS: 236210
New
International
Town of Redcliff - Request for Proposal - Design-Build of Shop Building
Solicitation # AB-2026-05458
The Town of Redcliff is seeking a proponent to design and build a dedicated equipment building in Cypress County, Alberta, to support the maintenance, storage, and protection of heavy machinery including rock trucks, loaders, bulldozers, and compactors. The project requires full design-build responsibility, encompassing geotechnical investigations, detailed engineering drawings, site preparation, and construction of a framed wood structure on an engineered foundation with a minimum 50-year service life. The facility must include all structural components, building envelope systems, interior fit-out, and integrated mechanical, electrical, drainage, and safety systems necessary to accommodate landfill operations in compliance with municipal, provincial, and national codes. The proponent will be responsible for selecting the optimal building location based on geotechnical findings and delivering a fully functional facility that enhances operational efficiency, equipment longevity, and workplace safety. Proposals must be submitted by September 2, 2026, and all work is to be performed at the specified location in Cypress County, Alberta. The solicitation is issued under reference number AB-2026-05458 and was posted on July 31, 2026. Primary contact for inquiries is Lee Kennedy, Landfill Manager, reachable via phone or email. The project does not specify a set-aside classification or NAICS code, and all deliverables must meet the technical and regulatory requirements outlined in the Scope of Work without reliance on external documentation or file references.
Town of Redcliff

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 236210
New
Federal
15340 - Mezzanine & Modular Office
Solicitation # FA8227-26-A-1002
The project titled 15340 - Mezzanine & Modular Office under solicitation number FA8227-26-A-1002 is a Total Small Business Set-Aside governed by FAR 19.5, targeting small business contractors for the design and construction of a 1,200 square foot enclosed mezzanine in the South Center section of Building 238 at Hill Air Force Base, Utah. The scope requires the fabrication and erection of a steel structure with no more than nine support columns and minimal new footings, alongside complete enclosure and finishing of the upper level including walls, ceiling, flooring, cabinetry, and integration of structural, electrical, lighting, data, and fire alarm/suppression systems to support an office, break room, and multi-purpose computer lab/meeting area. All work must comply with Unified Facility Criteria, Hill Air Force Base Facility Design Standards, and applicable local and national building and safety codes, with steel components painted light grey using industrial-grade primer and paint and a minimum 11-foot clear height required beneath the mezzanine. Lighting must be LED with dimmer switches, and all systems must meet occupancy-rated safety standards. The solicitation, posted on May 29, 2026, has undergone multiple extensions to the response deadline, culminating in a final submission date of August 3, 2026, to accommodate questions and revisions following a site visit on July 14, 2026, which required RSVPs by July 10. The questions period closed on July 17, with no further RFIs accepted after that date. Technical proposals must include designed lumen counts for each space and provide either a single optimized solution or dual options if the constraint of nine or fewer columns cannot be met without unacceptable cost or feasibility issues. All email correspondence must be sent to SSgt Ruano Gutierrez and Hideo Mera with the Notice ID and project name included in the subject line. The contract is classified under NAICS code 236210, with performance occurring exclusively at Hill AFB, UT 84056. While the solicitation confirms the set-aside status and technical requirements, specific evaluation criteria, pricing structures, inspection protocols, payment details, or required representations and certifications beyond small business status are not detailed in the available documentation.
FA8227 Afsc Ol H Pzim

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 236210
New
SLED
Pre-Engineered Metal Building Design & SupplyThe contract entails the full design, engineering, fabrication, and supply of a pre-engineered metal building system, encompassing all structural framing, roofing, wall panels, and associated components necessary for complete assembly. This effort is classified as a subcontract under NAICS code 236210, indicating it falls within the commercial and institutional building construction category, and is being procured by the Texas Department of Transportation for a specific project requiring durable, standardized metal building solutions. The work must be completed in full compliance with technical and performance specifications without requiring on-site construction of structural elements, relying instead on factory-manufactured components delivered ready for installation. The solicitation was posted on July 27, 2026, with a firm response deadline of August 10, 2026, at 9:00 PM Central Time, leaving bidders with a limited window to submit proposals. While the exact location of performance is not specified, the contract is tied to Texas Department of Transportation infrastructure needs, suggesting deployment within the state’s transportation-related facilities or right-of-way projects. No set-aside provisions or organizational type restrictions are indicated, meaning all qualified entities may compete. Participation requires demonstrating capability in end-to-end metal building systems delivery, including design validation, manufacturing quality, and logistical coordination for timely delivery and site readiness.
Texas Department of Transportation

POSTED

5 days ago

DEADLINE

in 9 days
View Details
NAICS: 236210
New
Federal
Y--CON INSTALL METAL CANOPY BLDG 521, WHS
Solicitation # 140A2326Q0155
This solicitation, numbered 140A2326Q0155 and amended by P00001, is a firm-fixed-price contract set aside exclusively for Indian Small Business Economic Enterprise (ISBEE) firms under the Department of the Interior’s Indian Education Acquisition Office. The work involves the installation of a steel metal canopy structure at Fort Wingate, New Mexico, including concrete footings, a gutter and drainage system, and 18 steel bollards, with full demolition, site preparation, material delivery, installation, and restoration required. The project has an estimated value between $25,000 and $100,000, and performance must be completed within 60 calendar days after notice to proceed. All bids must comply with strict bonding requirements: a 20% bid bond, and 100% performance and payment bonds, with bond premiums included within the contract price and not as separate line items. Bidders are also required to submit indemnification agreements used to secure bonds or an affidavit from the surety stating none were needed, and failure to do so will result in bid rejection. The solicitation mandates submission via email to maryjane.johnson@bie.edu by the extended deadline of August 17, 2026, at 12:00 p.m. Mountain Daylight Time, with no further questions accepted after July 20, 2026. Bidders must hold a Unique Entity ID, self-certify as an eligible ISBEE firm, and submit completed representations affirming they are not debarred, suspended, or subject to tax delinquency or inverted corporate structures. Key personnel must be named in the proposal, and subcontracting is limited to 50% for services and up to 75–85% for construction, ensuring direct economic benefit to the ISBEE. Compliance with Buy Indian provisions is required before award and upon completion. The Government will evaluate proposals solely on lowest price from a responsible and responsive bidder, with no trade-off process. Payment must be requested electronically through the Invoice Processing Platform, and inspection and acceptance occur at the site in Fort Wingate under FAR 52.246-12, with work subject to EM385-1-1, OSHA, and other federal safety standards. Failure to meet any requirement, including submission format, bonding documentation, or socioeconomic certification, will result in non-responsiveness and dis
Indian Education Acquisition Office

POSTED

5 days ago

DEADLINE

in 16 days
View Details
NAICS: 236210
Federal
B145 DCMA Office Space Renovation
Solicitation # W50S8A26QA035
The solicitation W50S8A-26-Q-A035 requests qualified small businesses to submit firm fixed price quotes for the renovation of office space in Building B145 at Pease Air National Guard Base in Newington, New Hampshire. The work requires all labor, materials, equipment, tools, transportation, and supervision necessary to complete the project, with an anticipated performance duration of 90 days. This requirement is fully set aside for small businesses under NAICS code 236210 with a size standard of $45 million, and the product or service code is Z2AA. Interested parties must review the attached specifications, drawings, and SF1442 document, which includes all applicable provisions and clauses governing the contract. Responses must be submitted via email to the designated points of contact no later than August 21, 2026, at 2:00 PM EST. A mandatory site visit is scheduled for August 5, 2026, at 10:00 AM EST, and contractors must follow the access procedures outlined in section 00 21 00 to attend. All requests for information must be submitted by the deadline specified in that same section. It is explicitly noted that funds are not yet available for this requirement, as per FAR 52.232-18, and will only be obligated at the time of award. The National Guard will apply standard federal and defense acquisition regulations for equitable adjustments, with no additional agency-specific procedures beyond those in FAR 43.204, DFARS 243.204, and AFARS 5143.204. Historical data on equitable adjustment timelines is currently unavailable and will be provided in future announcements. The contracting office is based in Portsmouth, New Hampshire, under the Department of Defense, with primary and secondary points of contact listed for inquiries.
W7NN Uspfo Activity Nhang 157

POSTED

8 days ago

DEADLINE

in 20 days
View Details