Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

RF Power Divider Manufacturing & Assembly

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the manufacture and delivery of three RF power dividers meeting the National Stock Number NSN 5895012201810, with strict compliance required for quality, labeling, and packaging standards as defined by military specifications. All components must be fully assembled and tested to ensure functionality and reliability under operational conditions, with documentation to verify conformance throughout the production lifecycle. The work is restricted to small businesses under a Total Small Business Set-Aside designation, aligned with SBA regulations and the NAICS code 336415 for other communications equipment manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the finished products must be delivered or where final assembly and testing will occur. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026, with the contract structured as a subcontract under the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. The procurement is accessible via the DIBBS portal for interested small businesses to review requirements and submit proposals.

General Info

Small business contract to manufacture and deliver three RF power dividers to New Cumberland, PA, per military specs.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 3 RF power dividers compliant with NSN 5895012201810, including full adherence to quality, labeling, and packaging standards.

Similar Contracts

Same NAICS industry code

LINER, SEAL, PROPELLE

Solicitation # SPE7M4-26-T-299U

The contract solicits one each of two identified liner, seal, and propeller components under NSN 2010-01-515-8037, with delivery required within 20 days to two distinct U.S. Navy vessels—the USS America LHA-6 and USS Wasp LHD-1—via FOB destination terms. Both line items carry zero quantity variance and mandate compliance with MIL-STD-2073-1E packaging standards, including preservative methods, containment types, and unit packaging codes, alongside MIL-STD-129 marking requirements and DLA-specific palletization guidelines. Mercury or mercury-containing compounds are strictly prohibited in or on the supplied hardware except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Shipments must use traceable freight methods and not parcel post, with designated freight and delivery addresses provided for each recipient. The solicitation, issued under SPE7M4-26-T-299U, references DLA’s master list of technical and quality requirements, governed by revisions effective on the solicitation or award date depending on acquisition size, and incorporates specific government use codes, project identifiers, and contact information for fulfillment and tracking. Delivery deadlines are set for July 30, 2026, and August 4, 2026, respectively.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

ASSEMBLY, ROLLER

Solicitation # SPE4A6-26-T-12KU

The contract is for the procurement of nine units of ASSEMBLY, ROLLER with NSN 1450-01-590-3238 under solicitation SPE4A6-26-T-12KU, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The quantity is fixed with zero variance allowed, and all items must be packaged in accordance with ASTM D3951 and fully compliant with MIL-STD-129 labeling and DLA Packaging Requirements for Procurement, with palletization adhering to RP001 standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards, and configuration changes must be managed through an Engineering Change Proposal. Sampling must follow MIL-STD-1916 or an approved zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are treated as major with zero non-conformances required in sampled lots. Compliance with CMMC Level 2 self-assessment is mandatory, and removal of government identification from non-accepted supplies is required. The unit of issue is each (EA), priced at $9.00 per unit with no price variation permitted. The original delivery deadline is June 24, 2027, though the need ship date is January 31, 2027. All items must be marked and labeled per DLA directives and delivered to the specified government receiving warehouse.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # N0010426QAD04

This contract is a Small Business Set Aside total solicitation for the manufacture of TAPE, SEALING with part number TOST-436W and cage code 3Z027, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The solicitation, numbered N0010426QAD04, was posted on August 4, 2026, with a response deadline of September 3, 2026, and requires strict adherence to military standards for design, marking, and quality assurance. The item is classified as a shelf life product, and government source inspection per FAR 52.246-2 is mandatory. Delivery must be completed within 90 days, and the contract operates under FOB destination terms with payment processed through Wide Area Workflow using a combined invoice and receiving report. The contractor must comply with detailed requirements for material specifications, design changes, and part substitutions, categorized under six coded change types that dictate notification and approval procedures. All items must be marked according to applicable military standards such as MIL-STD-130 and MIL-STD-1285, and packaging must conform to MIL-STD-2073. Records of all inspections must be maintained for 365 days after final delivery, and no substitutions are permitted without prior written approval from the Contracting Officer. Commercial brand name descriptions are accepted, but alternate proposals must include full technical documentation to prove compliance. Security requirements include Cybersecurity Maturity Model Certification, National Defense Priority Rating, and restrictions under Class Deviation 2026-O0025, while compliance with Annual Representations and Certifications is mandated under deviation 2026-O0043. Contact for inquiries is Amanda R. Hayward, with email and phone details provided for administrative coordination.

Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

LINING PAD, BHD

Solicitation # N0010426QAD03

This contract is for the manufacture of the LINING PAD, BHD, identified by part number 5945465-001 with cage code 53711, under a total small business set-aside solicitation numbered N0010426QAD03. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, and requires full compliance with military specifications including MIL-R-6855, ASME-Y14.5M, and MIL-DTL-31000. The item must meet exacting design standards as defined in multiple drawings and technical documentation, with drawings accessible via SAM.gov. Delivery is due within 90 days of contract issuance, and the product must have at least 85 percent of its shelf life remaining upon arrival at the first government activity, with precise marking requirements per MIL-STD-129 and MIL-STD-130. The contract mandates Government Source Inspection under FAR 52.246-2 and requires the contractor to maintain complete inspection records for 365 days after final delivery. Configuration control follows MIL-STD-973, with all engineering changes, deviations, and waivers must be formally submitted to the designated contracting officer. The contractor is responsible for ensuring all materials and processes comply with applicable military standards, including marking, packaging per MIL-STD-2073, and preservation requirements. Shelf-life items must be clearly labeled with manufacture, expiration, or test dates using the specified numeric month and two-digit year format, and shipping containers must reflect the earliest date among identical units. Security and cyber maturity requirements are enforced under recent DOD deviations, and the delivery must meet priority rating classifications for national defense. All contractual documents are considered officially issued upon electronic transmission or mailing, and acceptance of the proposal forms a binding agreement. Payment and logistics are managed via Wide Area Workflow, with inspection and acceptance occurring at the source, and all document references must be obtained from DODSSP or designated government offices. This solicitation is strictly for small business concerns, and unauthorized disclosure of proprietary or NOFORN information is prohibited.

Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

TRAVEL LOCK ASSEMBL

Solicitation # SPE4A6-26-T-11NL

The contract pertains to the procurement of three Travel Lock Assemblies for Rocket applications, identified by NSN 1440-01-281-2368, with a delivery requirement of 20 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated web portal, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, and inspection and acceptance at the origin. Government identification must be removed from non-accepted supplies, and bare items must be physically marked according to specified guidelines. While Item Unique Identification is not required, DFARS 252.211-7003(c)(1)(i) governs this exclusion. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based foreign nationals, and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA authorization. The solicitation number is SPE4A6-26-T-11NL, with a response deadline of August 11, 2026, issued under NAICS code 336415 by the Department of Defense’s ASC Commodities Division, with Mellisa Heise as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-383A

The contract pertains to the procurement of one unit of SafetyNet, identified by NSN 1450-01-588-5851, under solicitation SPE4A7-26-T-383A, with a response deadline of August 6, 2026, and an anticipated delivery date 171 days after award. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Technical data for this item is not publicly available due to proprietary or insufficient information, limiting competitive bidding. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless另有规定, and attributes must be classified with specified verification levels or AQLs. The manufacturer may choose attribute or variable inspection methods unless contractually restricted. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria. The item is to be delivered to Hill AFB, Utah, and the contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Lexus Henry as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

DIVIDER, POWER, RADIO FR

Solicitation # SPE4A7-26-T-607E

The contract specifies the procurement of a Radio Frequency Power Divider, identified by NSN 5895012201810 and part number 7017697920, with a total quantity of three units to be delivered FOB origin within 524 days. The item must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with acceptance criteria tied to MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels or AQLs based on attribute criticality. Inspection and acceptance occur at the manufacturer’s origin, and packaging must conform to MIL-STD-2073-1E with marking per MIL-STD-129, including specific packaging codes and palletization under DLA packaging guidelines. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and the supplier must meet all applicable defense information handling protocols. A separate first article test line item is included with a unit quantity of one, indicating the government’s requirement for performance validation; failure to quote a price for this item will result in no separate charge being assumed, and the line item may be voided if the test is waived. The solicitation is a total small business set-aside under NAICS code 336415, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation governed by DLA procedural notes. The contract emphasizes strict adherence to document revisions, zero variance in quantity, and full compliance with government-specified standards without exception.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

F00T, EJECTOR, FW

Solicitation # SPE4A0-26-T-4133

The contract pertains to the procurement of a Forward Ejector Foot, designated Part Number 68A733218-1007 with NSN 1440-01-453-4234, under solicitation SPE4A0-26-T-4133. Eight units are required at a unit price of $8.00, with delivery mandated within five days FOB origin. The item must be manufactured using a forging process, necessitating specific tooling and sourcing coordination through designated DLA supply chain teams for Aviation or Land & Maritime systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization adhering to DLA packaging standards. Acceptance occurs at origin with zero tolerance for non-conformances under sampling rules aligned with MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. ISO 9001:2015 quality management certification is required for both manufacturers and non-manufacturers, and government identification must be removed from non-accepted supplies. Unit of issue is EA, and Item Unique Identification is not mandated per customer request under DFARS 252.211-7003. All measurements and testing equipment must meet applicable standards, and the contract is administered by the DLA Aviation Supply Chain ESOC Buy office with Danita Davis as the primary point of contact.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

OIL TRANSFER ASSEMB

Solicitation # SPE4A5-26-T-318N

The contract pertains to the procurement of an Oil Transfer Assembly identified by NSN 2010-01-253-2060 and part number 694002001, supplied by GE Aviation Systems LLC, categorized as a critical application item. The requirement is for three units, with delivery scheduled 463 days from the contract award under FOB origin terms, and both inspection and acceptance occurring at the destination. Strict packaging standards mandate compliance with MIL-STD-2073-1E and MIL-STD-129 for labeling and marking, with no special marking required. Packaging must adhere to DLA’s procurement guidelines, including use of specific preservation methods, cushioning materials, and unit containers. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, or weapon systems, which must include secondary containment and meet NAVSEA 5100-003D specifications. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLA procedural notes. The solicitation was issued under contract number SPE4A5-26-T-318N with a response deadline in August 2026 and a required ship date of November 17, 2027. All technical and quality requirements referenced via R and I numbers are derived from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

GEARSHAFT ASSEMBLY

Solicitation # SPE7M0-26-T-024T

The contract pertains to the procurement of a Gearshaft Assembly, identified by NSN 2010-01-065-5252 and part number 46296E290, supplied by TIMKEN GEARS & SERVICES INC., with a required quantity of five units to be delivered within five days of contract award. Delivery is to be FOB origin, with inspection and acceptance also occurring at the origin point, and no variance in quantity is permitted. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and container types, with marking adhering to MIL-STD-129 and no special marking required. Palletization must conform to DLA standards, and the shipment is destined for the General Depot of Naval Supplies in Kaohsiung, Taiwan. The contract incorporates technical and quality requirements from the DLA Master List, and cybersecurity compliance mandates a CMMC Level 2 self-assessment. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted, such as in specified batteries, lighting, instruments, or weapon systems, and any exempted items must include secondary containment. The item is designated as a critical application item, underscoring its essential operational role. The contract is issued under solicitation SPE7M0-26-T-024T with a response deadline of August 10, 2026, and a required delivery date of July 21, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

ADAPTER-LOWER, SPRIN

Solicitation # SPE4A6-26-T-10UA

The contract pertains to the procurement of 35 units of ADAPTER-LOWER, SPRING RETAINER, CYLINDER M with NSN/Part Number 1440-01-125-7609, issued under solicitation SPE4A6-26-T-10UA by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 90 days after delivery order issuance, and the solicitation was posted on July 30, 2026, with responses due by August 7, 2026. All supplied items must comply with MIL-STD-130N for item identification and are subject to stringent quality and technical requirements referenced in the DLA Master List of Technical and Quality Requirements. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively. Configuration control and engineering change proposals are mandatory, and any deviations require formal approval. The technical data associated with this item is subject to export controls under either ITAR or EAR, and unauthorized disclosure, including to foreign nationals within the U.S., is prohibited. Access to controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire. Additionally, the supplier must be certified under Cybersecurity Maturity Model Certification (CMMC) Level 2 by an accredited C3PAO. Documentation supporting source approval must align with the cited drawing and part number, and inspection and acceptance may occur at the supplier’s origin. The place of performance is Jacksonville, Florida, and primary point of contact is Monica Merritt at DLA. The NAICS code 336415 classifies this as an aerospace product and parts manufacturing procurement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-293K

The contract solicitation SPE7M4-26-T-293K is for the procurement of 46 units of a PAD AND HOLDER (BRAKE) with NSN 2010-01-066-6936, priced at $46.00 per unit for a total value of $2,116.00, under a total small business set-aside. Delivery is required within 136 days of contract award, no later than December 25, 2026, with FOB origin terms and shipment directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is designated as a critical application component, and strict adherence to DLA packaging requirements is mandated, including compliance with ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other standards. The product must be free of intentionally added mercury or mercury-containing compounds, except in specific exempted applications such as batteries or instruments, and any mercury-containing components must be shock-proof with secondary containment per NAVSEA 5100-003D. All shipments must include DOD-compliant barcodes using Code 39 or PDF417 and must be labeled in accordance with OSHA’s Hazard Communication Standard. Electronic submission via DIBBS is mandatory, with proposals due by August 10, 2026, and award anticipated to be made using a contract type to be determined by the contracting officer. Payment will be processed electronically through Wide Area WorkFlow, and compliance with extensive FAR and DFARS clauses is required, including those addressing small business representations, prohibiting hazardous materials like hexavalent chromium and mercury, restricting procurement from certain Chinese military companies, mandating electronic payment reporting, and prohibiting mandatory arbitration agreements and internal confidentiality restrictions. The contract imposes no quantity variance and requires inspection and acceptance at the destination by government personnel. Offerors must maintain active SAM registration, provide accurate socioeconomic status representations, and submit hazard warning labels and Safety Data Sheets prior to award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Warehousing and Storage of Finished Harness InventoryThe contract entails the secure, climate-controlled warehousing and inventory management of finished oxygen cylinder carrying harnesses, ensuring all items are stored under strict environmental controls to maintain product integrity until authorized government shipment. Full traceability of inventory is required at every stage, with comprehensive documentation and audit-ready systems in place to support governmental compliance and accountability. The storage facility must support accurate real-time tracking, inventory reconciliation, and controlled access protocols to prevent loss, damage, or unauthorized handling. This is a total small business set-aside subcontract classified under NAICS code 493130, designated for businesses certified under the SBA program, and issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026. While specific performance location details are not provided, the contractor is expected to comply with all federal contract requirements including security standards, supply chain integrity, and timely delivery readiness for government distribution. All operations must align with Department of Defense logistics protocols and maintain unwavering readiness for inspection and audit.

Farm Product Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

Logistics and Transportation of Finished HarnessesThe contract entails the transportation and delivery of finished oxygen cylinder carrying harnesses from the manufacturing site to designated government locations, requiring full compliance with Department of Defense shipping standards. All logistics operations must adhere to stringent military transportation protocols to ensure the safe and timely movement of these critical medical equipment components. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 484220 specifically identifies this as a heavy and tractor-trailer trucking service. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026, and the overseeing agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur at unspecified government destinations, and all shipments must meet DoD requirements for handling, tracking, and documentation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

Wholesale Supply of Tactical Harness Hardware and ComponentsThe contract solicits the wholesale supply of certified buckles, fasteners, and other hardware components critical to the assembly of oxygen cylinder carrying harnesses, requiring full traceability and documented compliance with military-grade standards. All items must meet precise technical specifications to ensure reliability and safety in tactical and emergency medical applications, with rigorous quality control processes enforced throughout production and delivery. The award will be made under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA, and is classified under NAICS code 423220 for merchant wholesalers of hardware and plumbing and heating equipment. The opportunity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV and is issued as a subcontract, indicating it supports a larger procurement program. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026. Performance locations are not specified, suggesting the components may be delivered to multiple DoD sites or integrated into broader logistics networks. All suppliers must provide complete documentation to ensure end-to-end traceability of materials and manufacturing processes, enabling compliance with defense supply chain security protocols and regulatory requirements.

Home Furnishing Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Metal Buckles and Hardware Supply for Tactical HarnessesThe contract seeks the manufacture and supply of corrosion-resistant, high-strength metal buckles and plated hardware components designed for use in life-support carrying harnesses, with all items required to meet rigorous military specifications. These components are critical to the integrity and reliability of tactical harness systems, demanding precision engineering and materials capable of withstanding extreme environmental and operational stresses. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The solicitation, identified under NAICS code 332996 for Other Fabricated Metal Product Manufacturing, was posted on August 4, 2026, with a response deadline of September 3, 2026. It is managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and performance will occur at an unspecified location. All submissions must align with the technical, quality, and delivery requirements inherent to military-grade life-support equipment, and bidders are expected to demonstrate capable production infrastructure, compliance with defense standards, and a clear pathway to consistent, on-time delivery. Interested parties must access the full solicitation through the provided DIBBS link to understand full technical specifications and submission protocols.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Raw Materials and Components for Harness AssemblyThe contract entails the supply of military-grade webbing, straps, padding, and thread specifically engineered for the assembly of oxygen cylinder carrying harnesses, with stringent requirements for full traceability and adherence to defense specifications. All materials must meet exacting performance and durability standards required for mission-critical defense applications, ensuring reliability under extreme operational conditions. The subcontract is issued as a total small business set-aside under the SBA program, reserved exclusively for small businesses certified to fulfill federal contracting obligations under FAR 19.5, with the NAICS code 315990 classifying the work within the other textile product mills category. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026, under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The performance location is not specified beyond agency oversight, and the contract is managed through the DLA Dibbs system with the solicitation number SPE4A726R0710. Bidders must demonstrate capability to deliver compliant materials with documented chain-of-custody and quality control processes aligned with defense supply chain integrity requirements. Successful vendors will support logistics and life-safety systems essential to military operations, emphasizing quality, compliance, and timely delivery without deviation from technical specifications.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Oxygen Cylinder Carrying HarnessesThe contract encompasses the manufacture, quality assurance, packaging, and delivery of Oxygen Cylinder Carrying Harnesses identified by National Stock Number 005712239, a life support item critical to mission-critical operations. Strict quality control and full traceability requirements are mandated due to the item’s essential role in medical and emergency support systems, demanding rigorous adherence to established standards throughout all production phases. The manufacturing process must ensure durability, reliability, and compliance with all applicable military specifications, with each unit subjected to thorough inspection and documentation to guarantee performance under demanding conditions. This acquisition is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to respond, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code 339920 indicates the work falls under Other Miscellaneous Manufacturing, aligning the scope with specialized fabrication of non-electronic medical or safety equipment. The solicitation was posted on August 4, 2026, with a response deadline set for September 3, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur under the oversight of this agency, with no specific location designated, allowing flexibility for qualified small businesses to fulfill the requirement while maintaining full compliance with federal defense procurement protocols.

Sporting and Athletic Goods Manufacturing

POSTED

about 5 hours ago

DEADLINE

Logistics and Packaging for Defense ShipmentsThe contract seeks qualified small businesses to develop and execute military-compliant packaging and shipping plans tailored for defense shipments, ensuring full adherence to DFARS freight requirements. This includes the accurate collection and submission of dimensional and weight data essential for precise transport cost modeling, which directly impacts logistics efficiency and compliance across the Department of Defense supply chain. All proposed solutions must meet strict military standards for protection, labeling, and handling during transit, with a focus on minimizing damage and ensuring timely delivery under operational conditions. This is a total small business set-aside under NAICS code 488510, exclusively reserved for small businesses as defined by the SBA, and is issued as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Interested parties must submit their proposals by the deadline of September 3, 2026, with the requirement to demonstrate proven experience in defense logistics, packaging certification, and compliance with federal regulations governing military transport. Performance is expected to align with DoD logistics protocols, though no specific location is designated for performance. Bidders are directed to the official DIBBS portal for full solicitation details and submission guidelines.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Cybersecurity Compliance and CMMC Assessment SupportThis contract solicits support services to enable defense contractors to achieve CMMC Level 2 compliance by implementing the controls outlined in NIST SP 800-171, conducting comprehensive system assessments, and preparing accurate SPRS reports for Controlled Unclassified Information environments. The work is targeted at small businesses, as the procurement is set aside entirely for small business participation under SBA guidelines, and is classified under NAICS code 541512 for computer systems design services. The services must be delivered to ensure full alignment with Department of Defense cybersecurity requirements for handling sensitive government data, with an emphasis on documentation, validation, and continuous compliance readiness. The contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is structured as a subcontract, indicating it supports a larger prime contracting effort. Interested parties must submit responses by September 3, 2026, and all activities will be performed in support of government contracts handling Controlled Unclassified Information. The solicitation is publicly accessible via the DIBBS portal, and while the place of performance and point of contact are not specified, the nature of the work requires close coordination with federal defense contractors across multiple locations to facilitate assessment, implementation, and reporting activities on-site or remotely as needed.

Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

Specialty Metal Supply for Defense ComponentsThe contract entails the supply of DFARS-compliant specialty metals, specifically high-strength alloys, designated for use in manufacturing military-grade microphone brackets. All materials must adhere to strict domestic sourcing requirements and maintain full traceability from origin through final delivery to ensure compliance with defense regulations. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 331110 indicating primary focus on steel manufacturing. The solicitation was posted on August 4, 2026, and responses are due by September 3, 2026, with performance tied to the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. While specific delivery locations and points of contact are not listed, the requirement mandates adherence to all applicable federal acquisition regulations regarding material origin, quality assurance, and documentation.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 5 hours ago

DEADLINE

Precision Machining and Fabrication of Microphone BracketThe contract calls for the precision machining and fabrication of a microphone bracket designed specifically for military communication systems, requiring adherence to Critical Application Item standards that ensure uninterrupted performance under extreme operational conditions. The component must meet stringent requirements for reliability, durability, and environmental resilience, with manufacturing processes subject to rigorous quality control to support mission-critical applications in defense environments. All work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the North American Industry Classification System code 332999 indicating it falls under miscellaneous fabricated metal product manufacturing. The solicitation was posted on August 4, 2026, with proposals due by September 3, 2026, and is issued under the Department of Defense through the ASC Supplier Oper AE and AF Division. The place of performance and office address details are not provided, but performance is expected to align with defense logistics and supply chain expectations for the U.S. military. Bidders must demonstrate proven capability in high-precision metal fabrication, quality assurance protocols, and experience supplying components for military systems, as failure to meet specifications could compromise communication effectiveness in the field. All interested parties must submit responses through the designated DIBBS portal by the stated deadline.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-611K

The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

DRUM ASSEMBLY, WINCH

Solicitation # SPE4A7-26-T-615R

The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE