Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SAFETYNET

Active
SPE4A7-26-T-383AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of SafetyNet, identified by NSN 1450-01-588-5851, under solicitation SPE4A7-26-T-383A, with a response deadline of August 6, 2026, and an anticipated delivery date 171 days after award. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Technical data for this item is not publicly available due to proprietary or insufficient information, limiting competitive bidding. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless另有规定, and attributes must be classified with specified verification levels or AQLs. The manufacturer may choose attribute or variable inspection methods unless contractually restricted. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria. The item is to be delivered to Hill AFB, Utah, and the contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Lexus Henry as the primary point of contact.

General Info

Procure one SafetyNet unit, NSN 1450-01-588-5851, deliver to Hill AFB by 171 days post-award, zero non-conformances required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-383A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lexus Henry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SAFETYNET
SAFETYNET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TECHNICAL DATA:
DSCR DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT.
IDENTIFY TO:
SAMPLING:
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ALTERNATE OFFERS:
ADEQUATE DATA FOR THE NSN/Part Number: 1450-01-588-5851 Quantity: 1 EA Purchase Request: 7016848485QTY: 1 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336415
New
DIBBS
LINER, SEAL, PROPELLE
Solicitation # SPE7M4-26-T-299U
The contract solicits one each of two identified liner, seal, and propeller components under NSN 2010-01-515-8037, with delivery required within 20 days to two distinct U.S. Navy vessels—the USS America LHA-6 and USS Wasp LHD-1—via FOB destination terms. Both line items carry zero quantity variance and mandate compliance with MIL-STD-2073-1E packaging standards, including preservative methods, containment types, and unit packaging codes, alongside MIL-STD-129 marking requirements and DLA-specific palletization guidelines. Mercury or mercury-containing compounds are strictly prohibited in or on the supplied hardware except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Shipments must use traceable freight methods and not parcel post, with designated freight and delivery addresses provided for each recipient. The solicitation, issued under SPE7M4-26-T-299U, references DLA’s master list of technical and quality requirements, governed by revisions effective on the solicitation or award date depending on acquisition size, and incorporates specific government use codes, project identifiers, and contact information for fulfillment and tracking. Delivery deadlines are set for July 30, 2026, and August 4, 2026, respectively.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336415
New
DIBBS
ASSEMBLY, ROLLER
Solicitation # SPE4A6-26-T-12KU
The contract is for the procurement of nine units of ASSEMBLY, ROLLER with NSN 1450-01-590-3238 under solicitation SPE4A6-26-T-12KU, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The quantity is fixed with zero variance allowed, and all items must be packaged in accordance with ASTM D3951 and fully compliant with MIL-STD-129 labeling and DLA Packaging Requirements for Procurement, with palletization adhering to RP001 standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards, and configuration changes must be managed through an Engineering Change Proposal. Sampling must follow MIL-STD-1916 or an approved zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are treated as major with zero non-conformances required in sampled lots. Compliance with CMMC Level 2 self-assessment is mandatory, and removal of government identification from non-accepted supplies is required. The unit of issue is each (EA), priced at $9.00 per unit with no price variation permitted. The original delivery deadline is June 24, 2027, though the need ship date is January 31, 2027. All items must be marked and labeled per DLA directives and delivered to the specified government receiving warehouse.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336415
New
Federal
TAPE,SEALING
Solicitation # N0010426QAD04
This contract is a Small Business Set Aside total solicitation for the manufacture of TAPE, SEALING with part number TOST-436W and cage code 3Z027, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The solicitation, numbered N0010426QAD04, was posted on August 4, 2026, with a response deadline of September 3, 2026, and requires strict adherence to military standards for design, marking, and quality assurance. The item is classified as a shelf life product, and government source inspection per FAR 52.246-2 is mandatory. Delivery must be completed within 90 days, and the contract operates under FOB destination terms with payment processed through Wide Area Workflow using a combined invoice and receiving report. The contractor must comply with detailed requirements for material specifications, design changes, and part substitutions, categorized under six coded change types that dictate notification and approval procedures. All items must be marked according to applicable military standards such as MIL-STD-130 and MIL-STD-1285, and packaging must conform to MIL-STD-2073. Records of all inspections must be maintained for 365 days after final delivery, and no substitutions are permitted without prior written approval from the Contracting Officer. Commercial brand name descriptions are accepted, but alternate proposals must include full technical documentation to prove compliance. Security requirements include Cybersecurity Maturity Model Certification, National Defense Priority Rating, and restrictions under Class Deviation 2026-O0025, while compliance with Annual Representations and Certifications is mandated under deviation 2026-O0043. Contact for inquiries is Amanda R. Hayward, with email and phone details provided for administrative coordination.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336415
New
Federal
LINING PAD, BHD
Solicitation # N0010426QAD03
This contract is for the manufacture of the LINING PAD, BHD, identified by part number 5945465-001 with cage code 53711, under a total small business set-aside solicitation numbered N0010426QAD03. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, and requires full compliance with military specifications including MIL-R-6855, ASME-Y14.5M, and MIL-DTL-31000. The item must meet exacting design standards as defined in multiple drawings and technical documentation, with drawings accessible via SAM.gov. Delivery is due within 90 days of contract issuance, and the product must have at least 85 percent of its shelf life remaining upon arrival at the first government activity, with precise marking requirements per MIL-STD-129 and MIL-STD-130. The contract mandates Government Source Inspection under FAR 52.246-2 and requires the contractor to maintain complete inspection records for 365 days after final delivery. Configuration control follows MIL-STD-973, with all engineering changes, deviations, and waivers must be formally submitted to the designated contracting officer. The contractor is responsible for ensuring all materials and processes comply with applicable military standards, including marking, packaging per MIL-STD-2073, and preservation requirements. Shelf-life items must be clearly labeled with manufacture, expiration, or test dates using the specified numeric month and two-digit year format, and shipping containers must reflect the earliest date among identical units. Security and cyber maturity requirements are enforced under recent DOD deviations, and the delivery must meet priority rating classifications for national defense. All contractual documents are considered officially issued upon electronic transmission or mailing, and acceptance of the proposal forms a binding agreement. Payment and logistics are managed via Wide Area Workflow, with inspection and acceptance occurring at the source, and all document references must be obtained from DODSSP or designated government offices. This solicitation is strictly for small business concerns, and unauthorized disclosure of proprietary or NOFORN information is prohibited.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336415
New
DIBBS
RF Power Divider Manufacturing & AssemblyThe contract is for the manufacture and delivery of three RF power dividers meeting the National Stock Number NSN 5895012201810, with strict compliance required for quality, labeling, and packaging standards as defined by military specifications. All components must be fully assembled and tested to ensure functionality and reliability under operational conditions, with documentation to verify conformance throughout the production lifecycle. The work is restricted to small businesses under a Total Small Business Set-Aside designation, aligned with SBA regulations and the NAICS code 336415 for other communications equipment manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the finished products must be delivered or where final assembly and testing will occur. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026, with the contract structured as a subcontract under the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. The procurement is accessible via the DIBBS portal for interested small businesses to review requirements and submit proposals.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336415
New
DIBBS
TRAVEL LOCK ASSEMBL
Solicitation # SPE4A6-26-T-11NL
The contract pertains to the procurement of three Travel Lock Assemblies for Rocket applications, identified by NSN 1440-01-281-2368, with a delivery requirement of 20 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated web portal, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, and inspection and acceptance at the origin. Government identification must be removed from non-accepted supplies, and bare items must be physically marked according to specified guidelines. While Item Unique Identification is not required, DFARS 252.211-7003(c)(1)(i) governs this exclusion. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based foreign nationals, and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA authorization. The solicitation number is SPE4A6-26-T-11NL, with a response deadline of August 11, 2026, issued under NAICS code 336415 by the Department of Defense’s ASC Commodities Division, with Mellisa Heise as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336415
New
DIBBS
DIVIDER, POWER, RADIO FR
Solicitation # SPE4A7-26-T-607E
The contract specifies the procurement of a Radio Frequency Power Divider, identified by NSN 5895012201810 and part number 7017697920, with a total quantity of three units to be delivered FOB origin within 524 days. The item must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with acceptance criteria tied to MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels or AQLs based on attribute criticality. Inspection and acceptance occur at the manufacturer’s origin, and packaging must conform to MIL-STD-2073-1E with marking per MIL-STD-129, including specific packaging codes and palletization under DLA packaging guidelines. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and the supplier must meet all applicable defense information handling protocols. A separate first article test line item is included with a unit quantity of one, indicating the government’s requirement for performance validation; failure to quote a price for this item will result in no separate charge being assumed, and the line item may be voided if the test is waived. The solicitation is a total small business set-aside under NAICS code 336415, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation governed by DLA procedural notes. The contract emphasizes strict adherence to document revisions, zero variance in quantity, and full compliance with government-specified standards without exception.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336415
New
DIBBS
F00T, EJECTOR, FW
Solicitation # SPE4A0-26-T-4133
The contract pertains to the procurement of a Forward Ejector Foot, designated Part Number 68A733218-1007 with NSN 1440-01-453-4234, under solicitation SPE4A0-26-T-4133. Eight units are required at a unit price of $8.00, with delivery mandated within five days FOB origin. The item must be manufactured using a forging process, necessitating specific tooling and sourcing coordination through designated DLA supply chain teams for Aviation or Land & Maritime systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization adhering to DLA packaging standards. Acceptance occurs at origin with zero tolerance for non-conformances under sampling rules aligned with MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. ISO 9001:2015 quality management certification is required for both manufacturers and non-manufacturers, and government identification must be removed from non-accepted supplies. Unit of issue is EA, and Item Unique Identification is not mandated per customer request under DFARS 252.211-7003. All measurements and testing equipment must meet applicable standards, and the contract is administered by the DLA Aviation Supply Chain ESOC Buy office with Danita Davis as the primary point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336415
New
DIBBS
OIL TRANSFER ASSEMB
Solicitation # SPE4A5-26-T-318N
The contract pertains to the procurement of an Oil Transfer Assembly identified by NSN 2010-01-253-2060 and part number 694002001, supplied by GE Aviation Systems LLC, categorized as a critical application item. The requirement is for three units, with delivery scheduled 463 days from the contract award under FOB origin terms, and both inspection and acceptance occurring at the destination. Strict packaging standards mandate compliance with MIL-STD-2073-1E and MIL-STD-129 for labeling and marking, with no special marking required. Packaging must adhere to DLA’s procurement guidelines, including use of specific preservation methods, cushioning materials, and unit containers. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, or weapon systems, which must include secondary containment and meet NAVSEA 5100-003D specifications. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLA procedural notes. The solicitation was issued under contract number SPE4A5-26-T-318N with a response deadline in August 2026 and a required ship date of November 17, 2027. All technical and quality requirements referenced via R and I numbers are derived from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336415
New
DIBBS
GEARSHAFT ASSEMBLY
Solicitation # SPE7M0-26-T-024T
The contract pertains to the procurement of a Gearshaft Assembly, identified by NSN 2010-01-065-5252 and part number 46296E290, supplied by TIMKEN GEARS & SERVICES INC., with a required quantity of five units to be delivered within five days of contract award. Delivery is to be FOB origin, with inspection and acceptance also occurring at the origin point, and no variance in quantity is permitted. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and container types, with marking adhering to MIL-STD-129 and no special marking required. Palletization must conform to DLA standards, and the shipment is destined for the General Depot of Naval Supplies in Kaohsiung, Taiwan. The contract incorporates technical and quality requirements from the DLA Master List, and cybersecurity compliance mandates a CMMC Level 2 self-assessment. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted, such as in specified batteries, lighting, instruments, or weapon systems, and any exempted items must include secondary containment. The item is designated as a critical application item, underscoring its essential operational role. The contract is issued under solicitation SPE7M0-26-T-024T with a response deadline of August 10, 2026, and a required delivery date of July 21, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336415
New
DIBBS
ADAPTER-LOWER, SPRIN
Solicitation # SPE4A6-26-T-10UA
The contract pertains to the procurement of 35 units of ADAPTER-LOWER, SPRING RETAINER, CYLINDER M with NSN/Part Number 1440-01-125-7609, issued under solicitation SPE4A6-26-T-10UA by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 90 days after delivery order issuance, and the solicitation was posted on July 30, 2026, with responses due by August 7, 2026. All supplied items must comply with MIL-STD-130N for item identification and are subject to stringent quality and technical requirements referenced in the DLA Master List of Technical and Quality Requirements. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively. Configuration control and engineering change proposals are mandatory, and any deviations require formal approval. The technical data associated with this item is subject to export controls under either ITAR or EAR, and unauthorized disclosure, including to foreign nationals within the U.S., is prohibited. Access to controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire. Additionally, the supplier must be certified under Cybersecurity Maturity Model Certification (CMMC) Level 2 by an accredited C3PAO. Documentation supporting source approval must align with the cited drawing and part number, and inspection and acceptance may occur at the supplier’s origin. The place of performance is Jacksonville, Florida, and primary point of contact is Monica Merritt at DLA. The NAICS code 336415 classifies this as an aerospace product and parts manufacturing procurement.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 336415
New
DIBBS
PAD AND HOLDER
Solicitation # SPE7M4-26-T-293K
The contract solicitation SPE7M4-26-T-293K is for the procurement of 46 units of a PAD AND HOLDER (BRAKE) with NSN 2010-01-066-6936, priced at $46.00 per unit for a total value of $2,116.00, under a total small business set-aside. Delivery is required within 136 days of contract award, no later than December 25, 2026, with FOB origin terms and shipment directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is designated as a critical application component, and strict adherence to DLA packaging requirements is mandated, including compliance with ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other standards. The product must be free of intentionally added mercury or mercury-containing compounds, except in specific exempted applications such as batteries or instruments, and any mercury-containing components must be shock-proof with secondary containment per NAVSEA 5100-003D. All shipments must include DOD-compliant barcodes using Code 39 or PDF417 and must be labeled in accordance with OSHA’s Hazard Communication Standard. Electronic submission via DIBBS is mandatory, with proposals due by August 10, 2026, and award anticipated to be made using a contract type to be determined by the contracting officer. Payment will be processed electronically through Wide Area WorkFlow, and compliance with extensive FAR and DFARS clauses is required, including those addressing small business representations, prohibiting hazardous materials like hexavalent chromium and mercury, restricting procurement from certain Chinese military companies, mandating electronic payment reporting, and prohibiting mandatory arbitration agreements and internal confidentiality restrictions. The contract imposes no quantity variance and requires inspection and acceptance at the destination by government personnel. Offerors must maintain active SAM registration, provide accurate socioeconomic status representations, and submit hazard warning labels and Safety Data Sheets prior to award.
FLUID HANDLING DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 493130
New
DIBBS
Warehousing and Storage of Finished Harness Inventory
Farm Product Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Transportation of Finished Harnesses
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 423220
New
DIBBS
Wholesale Supply of Tactical Harness Hardware and Components
Home Furnishing Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332996
New
DIBBS
Metal Buckles and Hardware Supply for Tactical Harnesses
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 315990
New
DIBBS
Supply of Raw Materials and Components for Harness Assembly
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 339920
New
DIBBS
Manufacturing of Oxygen Cylinder Carrying Harnesses
Sporting and Athletic Goods Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A7-26-T-615E
The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
This contract is for the procurement of 1,854 units of a machine thread bushing identified by NSN 5365-01-270-7546, under solicitation SPE4A7-26-T-610X, with a response deadline of August 12, 2026, and a delivery timeline of 128 days after award. The item is classified as a commercial item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to based on the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. The item must be physically marked as specified, and any technical data associated with it is subject to export controls under ITAR or EAR, requiring prior authorization for disclosure to foreign persons or entities, including foreign nationals within the U.S. Only contractors with JCP certification, approved training completion, and DLA authorization may access this controlled technical data. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 332510 and is managed by the Department of Defense through the ASC Supplier Oper AE and AF DIV, with performance expected in Texarkana, Texas, and primary point of contact being Jamiah Sutton.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details