Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

RF Signal Splitter

Active

Z5051State & Local

Response Deadline08/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service is soliciting bids for RF Signal Splitters under solicitation number Z5051 for use in AMI indoor high rise applications. The required hardware must be N-type splitters capable of operating between 900 MHz and 950 MHz, featuring an impedance of 50 ohms, a power rating of at least 5 watts, and an insertion loss of less than 0.5 dBi. Approved manufacturers and part numbers include Wilson E859105, Pasterna PE2092, and I-COM SC902N. Interested parties must submit their responses by August 31, 2026. The primary point of contact for this procurement is Alan Martinez.

General Info

Nashville Electric Service seeks RF Signal Splitters for AMI; bids due August 31, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

Z5051_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 24

Solicitation

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, USA

Contacts

Alan MartinezProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

SPLITTER RF AMI N-TYPE SPLITTER, RF AMI N-TYPE USED FOR AMI INDOOR HIGH RISE APPLICATIONS. RF SIGNAL SPLITTER CAPABLE OF OPERATING FROM 900 MHZ TO 950 MHZ; INSERTION LOSS MUST BE LESS THAN 0.5 DBI; POWER RATING MUST BE GREATER THAN OR EQUAL TO 5 WATTS; IMPEDANCE MUST BE 50 OHMS. ALL CONNECTORS MUST BE N-TYPE. Approved Manufacturers and/or Part Numbers: WILSONE859105 PASTERNAPE2092 I-COMSC902N

Similar Contracts

Same NAICS industry code

SENSING ELEMENT, FIR

Solicitation # SPE4A6-26-T-21VP

This contract is for the procurement of 17 units of a FIR sensing element, identified by NSN 6340014712595. The item is designated as a critical application item and is associated with part numbers from Kidde Technologies, Inc and Lockheed Martin Corp. The solicitation is a total small business set-aside under NAICS code 334290, managed by the Department of Defense ASC Commodities Division. Key requirements include adherence to DLA technical and quality standards, specifically regarding cybersecurity maturity model certification level 2 and covered defense information. Delivery is required within 163 days, with a need ship date of February 12, 2027, and an original required delivery date of September 19, 2028. Shipping is FOB origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and sampling shall follow MIL-STD-1916 or ASQ H1331.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Electronic Repair and Overhaul of Military Processor UnitsThis subcontract, issued by the Department of Defense under Navsup Weapon Systems Support, requires the complete overhaul, repair, testing, and certification of military processor units, part number 3144520-301. The objective is to return these units to a Ready for Issue condition through comprehensive component-level repairs and functional testing conducted in accordance with strict military specifications. The opportunity falls under NAICS code 334290 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 21, 2026, at 8:30 PM.

Navsup Weapon Systems Support

POSTED

about 24 hours ago

DEADLINE

Export-Controlled Components IntegrationThe Export-Controlled Components Integration subcontract, issued by the Department of Defense through W6QM Micc-Ft Drum, focuses on the supply and integration of components subject to ITAR or EAR regulations. The project requires strict adherence to export control laws and specific reporting obligations to ensure legal compliance. This opportunity is designated as a total Small Business Set Aside under NAICS code 334290. The performance of this contract will take place in the 76544 zip code area. Interested parties must submit their responses by the deadline of August 27, 2026, at 3:00 PM.

W6QM Micc-Ft Drum

POSTED

about 24 hours ago

DEADLINE

58--PROCESSOR,TARGET LO, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMB16

The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support intends to award a sole-source contract under FAR 6.302-1 for eight Processor Target units with part number 3144520-301 and NIIN 015866374, to support the repair or modification of legacy systems. Delivery will be FOB origin, and the contract action is not open to competitive bidding, as the government has determined that only one source is capable of fulfilling the requirement. Interested parties, including the original equipment manufacturer or non-prime suppliers, may submit capability statements, proposals, or quotations within 45 days of the notice publication, or 30 days if awarded under an existing Basic Ordering Agreement. Failure to respond will be interpreted as lack of interest by other potential suppliers. The requirement is tied to the title “58—PROCESSOR, TARGET LO, IN REPAIR/MODIFICATION OF,” with solicitation number N0038326QMB16, and the response deadline is September 21, 2026. All submissions will be evaluated solely to determine whether a competitive procurement should be conducted, with the final decision on sole-source award resting entirely within the government’s discretion. The point of contact is Stacey Ryan at NAVSUP WSS in Philadelphia, Pennsylvania.

Navsup Weapon Systems Support

POSTED

about 24 hours ago

DEADLINE

Notice to Sole Source - CEF Monaco Upgrade

Solicitation # FA302026Q0111

The 82d Contracting Squadron at Sheppard AFB, Texas, intends to award a sole source contract to Monaco Enterprises, Inc. for a technology refresh of the existing Monaco Fire Alarm Reporting System to Windows 11. This requirement encompasses all necessary personnel, labor, tools, materials, and equipment to complete the upgrade. The government is pursuing this as a sole source procurement under specific legal authorities because it has determined that only one responsible source can satisfy the requirements without compromising system integrity or proprietary software licensing. While the government intends to negotiate directly with Monaco Enterprises, Inc., interested parties may submit a statement of capabilities to be considered for the service. These submissions must demonstrate the ability to meet the requirements without violating exclusive hardware and software ownership. All capability statements and supporting documentation must be emailed to the designated contract specialists by 5:00 PM Central Time on August 31, 2026.

FA3020 82 Cons Lgc

POSTED

about 24 hours ago

DEADLINE

Handsets and Mobile Base System

Solicitation # W911YP26QA007

The Utah Army National Guard, through the U.S. Property and Fiscal Office for Utah Purchasing and Contracting, is soliciting quotes for the procurement of Handsets and a Mobile Base System under a Total Small Business Set-Aside, with the NAICS code 334290 for Other Communications Equipment Manufacturing. The solicitation, numbered W911YP26QA007, was issued on July 22, 2026, and responses are due by 12:00 PM EST on August 28, 2026, submitted electronically to Kristinna A. Braun at kristinna.a.braun.civ@army.mil. The contract is structured as a Firm-Fixed Price (FFP) award using the Lowest Price Technically Acceptable (LPTA) evaluation method, meaning the contract will be awarded to the offeror submitting the lowest-priced proposal that meets all mandatory technical requirements without trade-offs. The deliverables include one Mobile Base Station with UHF/VHF radio capability, 15W output, encryption, and remote control, and three Handsets/Transceivers designed for use with the base system, all of which must be uniquely identified with a two-dimensional Data Matrix symbology per MIL-STD-130 and ISO/IEC 16022 standards. Each item must be marked with a Unique Item Identifier (UII) that includes enterprise and serial data, reported to the DoD UID Registry, and compliant with ISO/IEC 15434 syntax. Delivery is required to 7602 South Airport Road, West Jordan, UT, with all transportation costs and risks borne by the contractor until delivery, and inspection and acceptance will occur at the same location. The period of performance is 60 work days from the award date. Offerors must be small businesses and represent their status in the System for Award Management, with additional certifications required for socioeconomic categories such as SDB, WOSB, EDWOSB, SDVOSB, or HUBZone if applicable. All proposals must include a Unique Entity Identifier (UEI) and CAGE code, and must affirmatively disclose whether they provide covered defense telecommunications equipment or services under 252.204-7018. The contract incorporates numerous FAR and DFARS clauses regarding payment by electronic funds transfer, Buy American provisions, sustainable products, cybersecurity, supply chain risk, prohibitions on hex

W7N3 Uspfo Activity Ut Arng

POSTED

about 24 hours ago

DEADLINE

PORTABLE AND MOBILE RADIOS

Solicitation # XPR2500

The City of Bell Flower is seeking bids for the procurement of portable and mobile radio equipment. The requirement includes 56 UHF capable handheld radios with at least 15 channels, each equipped with a docking station, battery, and microphone. Additionally, the city requires 5 UHF capable mobile radios with a minimum of 15 channels and accompanying microphones, along with 3 multi-unit chargers featuring 6 pockets each. The contract encompasses the full programming of all 61 devices with city radio channels, including all necessary labor and licensing fees. Interested parties must submit their responses by September 10, 2026, at 4:30 PM PT. Further details and official bid documents are available through the City of Bell Flower's government website.

City of Bell Flower

POSTED

DEADLINE

TALKBACK SPEAKER WI

Solicitation # SPE7M5-26-T-437M

This solicitation issued by the Defense Logistics Agency under the Department of Defense concerns the procurement of a single Talkback Speaker with the National Stock Number 5965-01-564-6190. The procurement is identified by solicitation number SPE7M5-26-T-437M and is categorized as a federal solicitation. Interested parties must submit their responses by the deadline of September 3, 2026. The request was officially posted on August 23, 2026, and is managed through the Defense Logistics Agency's procurement systems. Detailed information regarding the specific requirements and submission procedures can be accessed through the provided official procurement link.

Defense Logistics Agency

POSTED

DEADLINE

SWARMM Family 3 (SF3) Development and ProductionThe SWARMM Family 3 (SF3) Development and Production contract, managed by the Naval Information Warfare Systems, focuses on the creation of the MIDS SF3 radio. This software-defined radio must be capable of certified operation across various classification levels and is expected to handle data at the SECRET level and below while attaining CHVP NSA certification. A key technical requirement is the integration of embedded cryptographic engines that are software configurable to host specific Cryptographic Equipment Algorithms and networking waveform COMSEC and TRANSEC algorithms. This forecast opportunity is categorized under NAICS code 334290 and lists San Diego as the place of performance. The project is overseen by Contracting Officer Lindsay Nickel and Secondary Point of Contact Damon Griffin. The primary objective is to ensure the MIDS WDL SF3 design meets rigorous security and cryptographic standards for military communications.

Naval Information Warfare Systems

POSTED

DEADLINE

N0003925F4000_IPS_BATThe Naval Information Warfare Systems has issued a forecast for contract N0003925F4000_IPS_BAT, which is categorized under NAICS code 334290. The project is slated for performance in San Diego and was posted on August 16, 2026. Administrative oversight for this requirement is managed by Contracting Officer Patricia Poncefeliu, with Joseph Gonzales serving as the secondary point of contact. Further details regarding this procurement can be accessed through the official NAVAIR procurement portal.

Naval Information Warfare Systems

POSTED

DEADLINE

Depot Systems Support Follow-On Action (C)The Depot Systems Support Follow-On Action is a forecast opportunity issued by the Naval Information Warfare Systems Command, specifically Niwc Pacific. The primary objective of this effort is the joint maintenance and operation of a restoration depot dedicated to the fabrication, restoration, repair, overhaul, and calibration of various electro-mechanical and mechanical assemblies. This includes shipboard, ground, and airborne subassemblies and test equipment designed to provide comprehensive worldwide technical support to Government agencies as well as Fleet and Shore facilities. The project is categorized under NAICS code 334290 and is slated for performance in San Diego. Administrative oversight is managed by Contracting Officer Emily F. Green and Secondary Point of Contact Marianitojose Rosal. This action ensures the continued availability of critical technical support and hardware restoration capabilities for naval and government operations.

POSTED

DEADLINE

CANES MAC RFP 9119 (C)The Naval Information Warfare Systems agency has issued a forecast for the procurement of CTU Kits for SSBN Class vessels and two DDG shipsets. This requirement falls under NAICS code 334290 and is associated with the CANES MAC RFP 9119 (C) project. The performance for this contract is designated for San Diego. Primary administrative oversight is managed by Contracting Officer Susana Wiker, with Elisa Jaime serving as the secondary point of contact. The forecast was officially posted on August 16, 2026.

Naval Information Warfare Systems

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Oil, synthetic SAE 5W-20 (quarts)

Solicitation # Z5050

Nashville Electric Service is soliciting bids for synthetic SAE 5W-20 motor oil in quart quantities under solicitation number Z5050. The required oil must meet GF-6A industry standards and carry the Starburst API certification mark. Additionally, the product must comply with various specifications including API SN/RC, API SM, API SL, API SJ, ILSAC5, Chrysler MS-6385, Ford WSS-M2C945-A, and GM 6094M. Approved manufacturers and product lines include Mobil Super Synthetic, Chevron Havoline ProDS Full Synthetic, and Peak Perf Full Synthetic Oil. Interested vendors must submit their responses by August 31, 2026. The contract is managed by Alan Martinez in Nashville, Tennessee, and further details can be accessed through the agency's vendor portal.

Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)

POSTED

DEADLINE

Compression Sleeve

Solicitation # Z5046

Nashville Electric Service is soliciting bids for compression sleeves designed for 4/0 stranded aluminum and copper conductor combinations. These sleeves must be prefilled with a low voltage inhibitor and installed using an 840 Kearney die. Approved manufacturers and part numbers include options from Kearney, Homac, Blackburn, Askins, Burndy, Johnson, and Connecto. The solicitation, identified as Z5046, was posted on August 24, 2026, with a response deadline of August 27, 2026. The procurement is managed by Bailey Allen in Nashville, Tennessee. Interested parties can find further details and submit responses through the official vendor portal.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Bulb, headlamp H6054

Solicitation # Z5048

Nashville Electric Service is soliciting bids for the procurement of H6054 rectangular halogen headlamp bulbs designed for two headlite systems. The agency has approved several manufacturers and part numbers for this requirement, including AC-Delco, Genelech, Philips, Sylvania, and Wagner. This solicitation, identified as Z5048, was posted on August 24, 2026, with a response deadline of August 31, 2026. The contract will be performed in Nashville, Tennessee, and interested parties should coordinate with the primary procurement contact, Alan Martinez.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Expendable Caps

Solicitation # Z5047

Nashville Electric Service in Tennessee has issued solicitation Z5047 for the procurement of aluminum expendable caps, specifically model SS 100A. The agency has identified approved manufacturers and part numbers as ABBAUTO3872A21G01 and SOUTHERNBP-100. The solicitation was posted on August 24, 2026, with a response deadline of August 27, 2026. Performance will take place in Nashville, Tennessee, and interested parties should contact procurement representative Bailey Allen for further details.

Hardware Manufacturing

POSTED

DEADLINE

Aluminum Sheets

Solicitation # Z5052

Nashville Electric Service is soliciting bids for the procurement of mill finished 5052-H32 aluminum flat sheets measuring 1/8 inch by 4 feet by 8 feet. This solicitation, identified by number Z5052, was posted on August 24, 2026, with a response deadline of August 31, 2026. The contract is managed by the SLED organization in Nashville, Tennessee, with Shanna Faulk serving as the primary procurement contact. All performance and delivery requirements are centered in Nashville, Tennessee, and interested parties can submit their responses through the official vendor portal.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

DEADLINE

Solicitation # Z5054

Nashville Electric Service is soliciting bids for a 24 inch radio jumper featuring N male to N male connectors with a right angle configuration. The required hardware must be a 50 ohm very low loss coax jumper, with approved part numbers including TXML400-NM-NMRA-002F or PASTERNAPE3C4634, or an equivalent alternative. This solicitation, identified as Z5054, was posted on August 24, 2026, with a response deadline of August 28, 2026. The procurement is managed by Tiffany Caruthers in Nashville, Tennessee, and interested parties can submit responses through the official vendor portal.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Replacement Filter

Solicitation # Z5045

The Nashville Electric Service in Tennessee has issued solicitation Z5045 for the procurement of replacement filters for EZH20 water fountains. The contract specifically requires the ELKAY51300C part number from approved manufacturers to ensure compatibility with the existing equipment. This opportunity was posted on August 24, 2026, with a response deadline of August 26, 2026. The place of performance is located in Nashville, Tennessee, and interested parties should coordinate with the primary procurement contact, Bailey Allen, for further details or submission via the official vendor portal.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z5053

Nashville Electric Service is soliciting bids for red fiberglass utility sign stubout markers measuring 3.75 to 4 inches wide and 96 inches long. The manufacturer is responsible for supplying and applying customized decals to the markers based on text and design specifications provided by NES. This solicitation, numbered Z5053, was posted on August 24, 2026, with a response deadline of August 31, 2026. Approved manufacturers and part numbers include options from GLF, UTICOM, VULCAN, PRO-MARK, CARSON, and WILLIAMFLEX. The performance location is Nashville, Tennessee, and the primary procurement contact is Tiffany Caruthers.

Sign Manufacturing

POSTED

DEADLINE

Water/fuel separator filter

Solicitation # Z5049

Nashville Electric Service is soliciting bids for water and fuel separator filters specifically designed for Mercedes Benz 15 liter engines. The approved part number for this requirement is ALLIANCE03-43845-001. This solicitation, identified as Z5049, was posted on August 24, 2026, with a response deadline of August 31, 2026. The procurement is being managed by Alan Martinez in Nashville, Tennessee, and interested parties can submit their responses through the official vendor portal.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Disconnect Switch

Solicitation # Z5033

The Nashville Electric Service has issued solicitation Z5033 for the procurement of a 900A line tap disconnect switch. This hook stick operated equipment must feature a 900A continuous current rating, a 150 KV BIL rating, and a 40KA momentary current rating. Technical specifications require the switch to include a single polymer insulator, 3/4 inch angled hangers, and loadbreak hooks, with a maximum allowable weight of 24 lbs. Approved manufacturers for this requirement include Siemens, specifically part number R394PY, and Cooper, specifically part number D73LT39S0H5. Interested parties must submit their responses by the deadline of August 26, 2026, at 7:00 PM. The solicitation was posted on August 21, 2026, by the Nashville Electric Service located in Tennessee. For inquiries regarding this procurement, the primary point of contact is Bailey Allen, who can be reached via email at ballen1@nespower.com or by phone at 615-747-3724. All bidding activities and documentation should be managed through the official vendor portal provided by the agency.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Solicitation # Z5034

This solicitation from the Nashville Electric Service requires the procurement of specific aluminum quadruplexed cable, identified by the codename WAKE FOREST/XLP/EYS. The technical specifications call for 600-volt cable consisting of three 4/0 19-strand phase conductors and one 2/0 19-strand neutral conductor, featuring crosslinked polyethylene insulation with a minimum thickness of 80 mils. All conductors must meet ICEA specifications and be UL labeled. Strict identification requirements are in place, necessitating that phase conductors be marked with labels A, B, and C without exception, while all conductors must be imprinted with the manufacturer's name, size, material type, and year of manufacture. Additionally, the neutral conductor must include sequential footage marking, and all cable ends must be equipped with watertight seals. Logistical requirements dictate that the cable be delivered on sound wood reels with either wood or steel drums, featuring metal center hub collars. Each reel must contain approximately 1000 circuit feet and must adhere to specific size constraints, remaining under 69 inches in diameter and 44 inches in width. Every reel must also be clearly stamped with its tare, net, and gross weights. This solicitation, numbered Z5034, is managed by the Nashville Electric Service in Tennessee, with a response deadline of August 26, 2026.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Solicitation # Z5031

Nashville Electric Service is soliciting bids for an Orion standard RS-232 port card intended for use with a communications processor. The approved manufacturer and part number for this equipment is Novatech 5RSPARE-A. This solicitation, identified by number Z5031, was posted on August 20, 2026, with a response deadline of August 28, 2026. The procurement is managed by Tiffany Caruthers in Nashville, Tennessee, and interested parties can submit responses through the official vendor portal.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE