This Solicitation opportunity from Government of Canada was posted on November 25, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RFI - Mobile Tower System for propagation research

Closed

ISED214722International

Submission Closed11/25/2025, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334220

New

DIBBS

Test Set Coupler Supply

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture and Supply of YIG/SW ModulesThis subcontract with the Department of Defense, managed by DLA Mechanicsburg, involves the manufacture and supply of 10 specialized Yttrium Iron Garnet (YIG) / SW modules for prime contractors on NAVSUP WSS projects. The selected provider must utilize specialized microwave and RF manufacturing equipment to produce units according to precise technical drawings, ensuring all modules are fully marked and packaged in compliance with MIL-STD-130. Critical requirements for this engagement include strict adherence to the Counterfeit Detection and Avoidance Program (CDAP) standards and the provision of comprehensive supply chain traceability, including CAGE codes. The project falls under NAICS code 334220, with a response deadline set for November 27, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Waveguide Switch Fabrication and AssemblyThis subcontract involves the fabrication and assembly of a single Waveguide Switch, identified by NIIN 016035066, for prime contractors supporting Department of Defense procurement projects. The work is managed under the agency SPRMM1 DLA Mechanicsburg and falls under NAICS code 334220. Production must strictly adhere to design references 00471 (33C98100-1) and 00443 (101091) using precision waveguide equipment to ensure all quality requirements are met. The contractor is required to implement NIST SP 800-171 security standards to ensure the protection of Controlled Unclassified Information and must provide a Material Safety Data Sheet. The solicitation was posted on November 12, 2026, with a response deadline of December 11, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Amendment 0002 - Army Contracting Command - Aberdeen Proving Ground (ACC-APG)Capability Program Executive Command and Control Information Network (CPE C2IN) Commercial Solution Opening (CSO) Call for Solutions (CfS) for PdM WESS

Solicitation # W15P7T-27-R-DIGIF

The Product Manager Wideband Enterprise Satellite Systems (PdM WESS), through the Army Contracting Command-Aberdeen Proving Ground, is seeking a commercial-off-the-shelf Digital Intermediate Frequency Subsystem (DIFS) to modernize satellite communications ground infrastructure. The objective is to replace legacy analog L-Band systems with a flexible, open-standard, modular architecture compliant with the DIFI standard to enhance resilience and interoperability. The selected vendor will be responsible for the delivery, integration, installation, and acceptance testing of the system across up to twenty worldwide SATCOM teleport sites. Key technical requirements include high availability of at least 0.9998, a 15-year service life, a mean time to repair of 30 minutes or less, and adherence to military standards such as MIL-STD-188-164C, MIL-STD-461G, and MIL-STD-810H. The acquisition process is conducted under the Army Open Solicitation (AOS) and follows a three-step selection method: the submission of solution briefs by December 10, 2026, followed by pitch sessions and technical demonstrations at Fort Belvoir, and concluding with a formal proposal submission. The primary deliverable is a Full-Scale Engineering Development DIFS first article, with subsequent options for production units. The government intends to award one FAR Part 12 commercial contract, with the possibility of additional Other Transaction Authority awards, with an estimated award timeline in the first quarter of 2027. Evaluation will focus on technical merit, maturity of the offering, and the vendor's ability to sustain the capability globally.

POSTED

DEADLINE

58--CONTROL,RADIO SET

Solicitation # N0038327QNA06

Solicitation N0038327QNA06 is a fixed-price procurement issued by Navsup Weapon Systems Support in Philadelphia, PA, for the acquisition of two units of Radio Set Controls (NSN 5821-01-527-4256). The contract requires delivery within 90 days on a FOB Destination basis, with inspection and acceptance performed at the origin. The contractor must adhere to ISO 9001 quality management standards and provide a warranty for the supplies for one year after the date of delivery. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for electrostatic discharge protection and wood packaging materials. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Past performance is evaluated via the DoD Supplier Performance Risk System (SPRS), while new offerors receive a neutral rating. Administrative requirements include the use of Wide Area Workflow (WAWF) for electronic invoicing and payment. Key compliance mandates include safeguarding covered defense information per DFARS 252.204-7012, adhering to Buy American and Balance of Payments programs, and complying with various security prohibitions and equal opportunity regulations.

Navsup Weapon Systems Support

POSTED

DEADLINE

59--ISOLATOR,RADIO FREQUEN

Solicitation # SPE7M127Q0168

POSTED

DEADLINE

Solicitation # SPRMM127QGA34

Solicitation SPRMM127QGA34, issued by the Department of Defense via DLA Mechanicsburg, is a request for the manufacture and delivery of one Waveguide Switch (NIIN 016035066). The procurement is governed by Lowest Price Technically Acceptable (LPTA) evaluation criteria, where award is granted to the responsible offeror providing the lowest price among those deemed technically acceptable. The required item must adhere to specific design standards represented by Cage Codes 00471, 00443, or 7Y193. Refurbished materials are strictly prohibited, and distributors must provide proof of authorization from the Original Equipment Manufacturer. The contract mandates strict adherence to military standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for preservation and packaging. Inspection and acceptance will occur at the origin. Contractors are required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Key compliance requirements include the Buy American and Balance of Payments programs, safeguarding of covered defense information per DFARS 252.204-7012, and the submission of a Material Safety Data Sheet if hazardous materials are present. All inspection records must be maintained for 365 calendar days following final delivery.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0038327QPA49

Solicitation N00383-27-Q-PA49 is a fixed-price request for quotation issued by the Navsup Weapon Systems Support for the procurement of one Waveguide Switch, part number 677-E-28VDC-P, NIIN 014608648. Quotes must be submitted via email to Dana N. Knittel by December 11, 2026. A critical requirement for this award is government source approval; offerors who are not already approved must submit all necessary data from the NAVSUP WSS Source Approval Brochure with their proposal to be considered. Delivery is required within 90 days on an FOB Destination basis. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Technical requirements include compliance with ISO 9001 Quality Management Systems and strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract also incorporates various federal and defense clauses, including Buy American and Balance of Payments programs, and mandates safeguarding of covered defense information per DFARS 252.204-7012.

Navsup Weapon Systems Support

POSTED

DEADLINE

59--SWITCH,RADIO FREQUENCY

Solicitation # SPE7M127T2620

POSTED

DEADLINE

Tactical Communication Systems - Procurement, Services & Sustainment (TCS-PSS) Call for Solutions

Solicitation # CSO-ARMY-TCS-PSS-2027

The Department of the Army is establishing a 10-year enterprise acquisition framework titled Tactical Communication Systems Procurement, Services and Sustainment (TCS-PSS) to modernize secure tactical communication capabilities. Conducted as a Commercial Solutions Opening under DFARS Subpart 212.70, this initiative seeks a combination of single-award Indefinite Delivery, Indefinite Quantity (IDIQ) contracts and Other Transactions (OTs). The scope encompasses the procurement, integration, and lifecycle sustainment of hardware, including radio transceivers and vehicle-mount installation kits for ground and aviation platforms, as well as software support, configuration management, and obsolescence planning. All solutions must integrate with the Next Generation Command and Control (NGC2) transport layer and meet rigorous security standards, specifically requiring NSA High Assurance certification or Sensitive but Unclassified-Encrypted (SBU-E) qualification. A critical technical requirement is the transition to Post-Quantum Cryptography (PQC). The government will not procure National Security System hardware after December 31, 2026, that is incapable of utilizing post-quantum algorithms, with a goal of achieving NIST validation by the end of 2030. SBU-E validation must meet FIPS 140-3 level 2, with a plan to reach level 3 by December 31, 2031. The procurement is open to all qualified large and small businesses, with no dedicated set-asides. Interested vendors must submit a white paper of no more than 15 pages or slides by December 14, 2026. These submissions serve as a preliminary screening gate, with final awards determined in a subsequent detailed proposal phase. Rough Order of Magnitude pricing should be based on a notional annual delivery of 5,000 radios.

POSTED

DEADLINE

Solicitation # SPE7LX27U0994

POSTED

DEADLINE

Bridge Communication and Access Equipment SupplyThis subcontract opportunity involves the supply of specialized communication and access equipment for prime contractors working on New York City Department of Transportation bridge projects. The scope of work includes providing industrial communication radios designed for use on traveling platforms, as well as the delivery of the traveling platforms and scaffolding themselves. The selected provider must ensure all equipment is delivered as fully operational systems and includes all necessary manufacturer warranties. The project is based in New York and falls under NAICS code 334220. Interested parties must submit their responses by the deadline of December 16, 2026. This procurement is managed through the New York City Department of Transportation to support critical infrastructure maintenance and safety on city bridges.

Department Of Transportation

POSTED

about 21 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The Government of Canada, through the Department of Industry, has issued Request for Information ISED214722 to gather industry feedback regarding the procurement of a Mobile Tower System for propagation research. The primary goal of this solicitation is to assess current industry capabilities and constraints, obtain time estimates for the acquisition process, and identify any necessary adjustments to the technical requirements to ensure the system can be delivered viably and at an acceptable cost. Additionally, the process serves to confirm whether potential bidders can comply with the technical requirements outlined in the draft Statement of Requirements. This federal initiative is centered in the National Capital Region of Canada, with Shabornee Dasgupta serving as the primary point of contact for interested parties.

General Info

Canada seeks industry feedback for procuring a Mobile Tower System for propagation research.

Agency

Government of Canada → Department of Industry

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

*National Capital Region (NCR) *Canada, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedNov 25

Solicitation

Response DeadlineNov 25

Deadline has passed

Submission Closed

11/25/2025, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Industry

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of Industry

Office AddressN/A

Contacts

Shabornee DasguptaPoint of Contact

Full Description

The objectives of this RFI process are as follows: To seek feedback from industry on the proposed technical requirements. This includes the desire for a better understanding of: • Industry capabilities and constraints. • Time estimates of the acquisition component of the proposed capability. • Required adjustments/changes to the technical requirements, if any, that are required to ensure that a viable Mobile Tower System can be delivered at an acceptable cost. To confirm potential bidder compliance with the technical requirements in the draft SOR.