Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

RFQ-171-260000000408-2 | 171/25474.KMM; Energy Center - Replace SWG Relays

Active

RFQ-171-260000000408-2State & Local

Response Deadline08/26/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation RFQ-171-260000000408-2, identified as 171/25474.KMM, seeks bids for the replacement of SWG relays at the Energy Center in Michigan. The solicitation was posted on August 5, 2026, with a response deadline of August 26, 2026, at 6:00 PM Eastern Time. It is classified as a SLED procurement under the Michigan Department of Technology, Management and Budget, with no specific set-aside designation applied. The work is to be performed at various locations within Michigan, and no single physical address has been designated for performance. Kristi Zakrzewski serves as the primary point of contact, reachable via email at zakrzewskik@michigan.gov or phone at 517-243-5669, with DTMB listed as a secondary contact. Bidders are directed to the Michigan Sigma procurement portal for full solicitation details and submission.

General Info

Replace SWG relays at Michigan Energy Center; bids due August 26, 2026; SLED procurement via Michigan DTMB.

Agency

Michigan → DTMBView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

MI, US

Set-Aside

NONE

Documents

(4)

Addendum 1 25474.pdf

PDF

Replace SWG Relays Project Advertisement 25474

PDF•advertisement

171-25474.KMM Energy Center Replace SWG Relays Bid Document

PDF•rfp

Service Disabled Veteran Owned Business Info Sheet 2025

DOWNLOAD•special-notice

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 5

Solicitation

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2026, 06:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMichigan → DTMB

Contacts2 people available

OfficeVarious, MI, US

Organization / Agency

Michigan → DTMB

View Agency Profile

Office AddressVarious, MI, US

Contacts

Kristi Zakrzewski

contact@example.gov

+1 (555) 000-0000

Dtmb

+1 (555) 000-0000

Full Description

Show more

171/25474.KMM; Energy Center - Replace SWG Relays

Similar Contracts

Same NAICS industry code

Unable to Decompose Subcontract OpportunitiesDue to a system outage causing a 504 gateway timeout, the prime contract details required to identify and structure subcontract or supplier opportunities could not be retrieved. As a result, no specific subcontract opportunities are currently available for decomposition or bidding, despite the solicitation being officially posted under the title "Unable to Decompose Subcontract Opportunities." The opportunity is classified as a subcontract with a Total Small Business Set-Aside under FAR 19.5, indicating that only small businesses are eligible to respond, though no NAICS code, organization type, or point of contact information is provided to guide potential bidders. The solicitation was issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The posting date is August 5, 2026, and responses are due by August 17, 2026. No office address, city, state, or country information is available for the contracting office, and no direct point of contact is listed. Interested parties can access the solicitation details via the provided DIBBS link, but without prime contract context, the scope, requirements, or deliverables remain undefined.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 14 hours ago

DEADLINE

Conditional Repair Support and Maintenance Services

POSTED

about 18 hours ago

DEADLINE

Hydraulic/Pneumatic Hose Repair

Solicitation # Y26-195

Orange County, Florida, is seeking qualified contractors to provide hydraulic and pneumatic hose repair services under solicitation Y26-195, which outlines a five-year term contract with indefinite delivery and indefinite quantity features. The scope includes on-site and off-site manufacturing, repair, and supply of hydraulic and pneumatic hose assemblies rated up to 6000 PSI and 1.5-inch diameter, along with mandated hose protectors, with a 24-hour mobile service requirement across the county and a two-hour response time to service calls. Repairs must begin within six hours of part receipt, with standard parts delivered within two business days and emergency “hot shot” deliveries allowed within two hours. The contract includes estimated budgets for labor, service calls, shop supplies capped at 3% of labor cost or $50 per invoice, freight up to $2,500 for Lot A, and parts/materials with a total budget of $1,300,000 for Lot A and $125,000 for Lot B, subject to contractor-proposed mark-up or mark-down percentages. Award will follow a Lowest Price Technically Acceptable methodology, where technical acceptability is a pass/fail criterion and price is the determining factor among qualified respondents. Proposals must be submitted electronically through the OpenGov e-Procurement Portal by September 8, 2026, at 4:00 PM, with non-compliant formats or submission methods resulting in rejection. Offerors are required to submit multiple compliance documents, including a Conflict of Interest Statement, Statement of Felony Convictions, and Statement of Litigation, with affirmative responses triggering mandatory attachments. Additional mandatory certifications include E-Verify enrollment for all new hires, an Anti-Human Trafficking Affidavit, and certification that the contractor is not designated as a terrorist organization under Florida law. Pricing for parts and materials may be adjusted annually based on the CPI-U, with a 4% maximum increase per renewal and a requirement to pass on any decreases, with failure to do so potentially triggering termination and debarment. The contract includes emergency priority provisions requiring the contractor to prioritize Orange County over private entities during public emergencies, and allows other government agencies to use the contract independently. Performance is governed by strict timelines with time being of the essence, and contractors must maintain all necessary professional licenses, comply with county-specific clauses regarding insurance, background screening, drug testing, confidentiality, data security, audit rights, and record retention, while accepting inspection

Administrative Svcs., Procurement Division

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Power Generation Equipment Emergency MaintenanceEmergency repair and maintenance services are required for military diesel generators, power distribution units, and backup power systems at Anniston Army Depot, with a focus on ensuring uninterrupted operational readiness of critical power infrastructure. The contract is classified as a subcontract under NAICS code 811310, which pertains to mechanical repair and maintenance, and is issued by the Department of Defense under W6QK Acc Anad. All work must be performed at the depot located in the 36201 zip code, where responders must be prepared to address urgent failures and perform preventative maintenance on mission-critical equipment. The solicitation opened on August 5, 2026, with a strict deadline for responses set for September 1, 2026, at 10:00 PM Eastern Time, requiring proposers to demonstrate capability, rapid response times, and compliance with military standards for power system reliability.

POSTED

about 19 hours ago

DEADLINE

Conventional Machine Tool Repair ServicesThe contract seeks qualified vendors to provide emergency repair and maintenance services for conventional, non-CNC machine tools including lathes, milling machines, grinders, and drill presses utilized in depot operations. These services are critical to maintaining operational readiness and must be performed promptly to minimize downtime of essential equipment. The work is to be carried out at a location with zip code 36201, and the contractor is expected to respond swiftly to urgent service requests, ensuring tools are restored to full functionality with minimal disruption to military logistics and production cycles. This subcontract opportunity, classified under NAICS code 811310 for machine shop, tool die, and mold making services, is issued by the Department of Defense under the agency name W6QK Acc Anad. The solicitation was posted on August 5, 2026, and responses are due by September 1, 2026, at 10:00 PM Eastern Time. Bidders must have demonstrated expertise in servicing industrial-grade mechanical equipment and be prepared to meet strict performance timelines. While no specific set-aside status is indicated, the work is exclusively designated as a subcontract and requires proven capability in field-based, high-priority maintenance operations within a military support environment.

POSTED

about 19 hours ago

DEADLINE

CNC Machine Tool Emergency Repair ServicesThe contract requires on-call emergency repair and maintenance services for CNC machine tools at the Anniston Army Depot, with a focus on urgent diagnostics, component replacement, and precise calibration to meet original equipment manufacturer standards. Services must be available to respond immediately to critical equipment failures to minimize operational downtime and ensure mission readiness. All work must adhere strictly to OEM specifications, and technicians are expected to possess the expertise to handle complex machinery failures under high-pressure conditions. The contract is classified as a subcontract under NAICS code 811310, with a proposed response deadline of September 1, 2026, and a posting date of August 5, 2026. Performance is required at the Anniston Army Depot in zip code 36201, with no specific set-aside designation indicated. The contracting agency is the Department of Defense, specifically under the W6QK Acc Anad organization, and all activities must align with federal defense procurement protocols, though further details regarding point of contact or location are not provided.

POSTED

about 19 hours ago

DEADLINE

Notice of Intent to Sole Source, Preventative and Emergent Maintenance for Aluminum Ion Vapor Disposition System (AIVD)

Solicitation # N6852026Q0267

The U.S. Navy’s Fleet Readiness Center Southeast in Jacksonville, Florida, requires scheduled semi-annual preventive maintenance, personnel training on maintenance procedures, and emergent repairs for two government-owned Aluminum Ion Vapor Disposition (AIVD) systems. To meet this need, the Commander, Fleet Readiness Centers, based in Patuxent River, Maryland, intends to award a sole-source purchase order to Pregl Services Inc. under FAR 6.103-1(b), citing the company as the only responsible source due to its exclusive proprietary licensing and restrictive data rights essential for servicing these specialized systems. No competitive solicitation is being issued, but any other responsible vendor may submit a capability statement within three business days of the notice’s publication to potentially influence a decision to open the requirement to competition, though the government retains full discretion to proceed with sole sourcing regardless of responses received. The procurement is identified under solicitation number N6852026Q0267, classified under NAICS code 811310 for industrial machinery repair and maintenance. The notice was posted on August 5, 2026, with responses due by August 10, 2026, at 7:00 p.m. Eastern Time. The place of performance is in Jacksonville, Florida, where the AIVD systems are located, and all work must be performed in accordance with the government’s operational and technical requirements. The primary point of contact for inquiries or submissions is Jenna Lang of the Fleet Readiness Center, reachable via email at Jenna.l.lang2.civ@us.navy.mil. This action is part of the Department of Defense’s maintenance and sustainment efforts for critical defense infrastructure reliant on proprietary technology.

Fleet Readiness Center

POSTED

about 19 hours ago

DEADLINE

48--RUPTURE DISK ASSY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAEW

The contract pertains to the procurement of five rupture disk assemblies, identified by NSN 7H-4820-016756159 and NV822184-5, to be delivered to DLA Distribution Norfolk, Virginia. The Government has determined that it cannot procure this item from alternate sources due to proprietary data restrictions and has deemed it uneconomical to acquire the necessary design rights or to reverse engineer the component. This procurement is being conducted under FAR 6.302-1 as a sole-source action, with no expectation of competition unless responses to this notice demonstrate capability and qualification that justify opening the acquisition to multiple offerors. All responsible parties may submit proposals or capability statements within 45 days of the notice publication, or 30 days if awarded under an existing Basic Ordering Agreement. The Government retains full discretion to decide whether to proceed with non-competitive award based on submitted information, and any award will be contingent on the offeror, product, or manufacturer meeting all applicable qualification requirements at the time of award. The solicitation number is N0010426QYAEW, posted on August 5, 2026, with a response deadline of September 21, 2026, and is classified as a Small Business Set Aside with total set-aside intent. The contracting office is the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with Dianne Wydra listed as the primary point of contact for technical and procedural inquiries. Technical documentation such as specifications, qualified product lists, and military handbooks may be accessed via the ASSIST-Online portal or through DODSSP, though proprietary drawings, patterns, and deviation lists are not available through these channels. Individuals without internet access may request documents via phone or mail to the DODSSP in Philadelphia. This action is strictly for supply procurement and does not involve service provision or data acquisition rights from the original manufacturer.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 2 months

427_2S LCS 1 Class Waterjet and Impeller Shaft Overhaul Contract_FY26

Solicitation # N6449826R0018

The Department of the Navy, through the Naval Surface Warfare Center Philadelphia Division, is seeking to award a sole-source, indefinite-delivery, indefinite-quantity contract to Bird Johnson Propeller Company, LLC for the repair and repackaging of Waterjet and Impeller Drive Shaft assemblies for Freedom Class Littoral Combat Ships. This action is authorized under 10 U.S.C. 3204(a)(1), which permits non-competitive procurement when only one responsible source exists and no other supplies or services will satisfy the government’s requirements. The contract will cover specific assemblies including the 172AX MK1 Boost Waterjet Assembly, 172AX MK1 Steerable Waterjet Assembly, and the Impeller Drive Shaft Assembly, with all work governed by a detailed Performance Work Statement included in the solicitation. The award will be a firm-fixed-price contract, ensuring price certainty for both parties, and will be issued to BJPCo based on its unique technical expertise and historical role in maintaining these systems. Interested parties must be registered in the System for Award Management to be eligible for award, and responses are due by August 18, 2026, at 12:00 PM Eastern Time. The solicitation, identified as N6449826R0018, replaces the prior notice RFP N6449823R4000 and is issued under NAICS code 811310 for repair and maintenance services. Primary point of contact for inquiries is Michaela Del Rossi, with secondary support from Matt Parlett, both reachable through the provided phone and email addresses. The place of performance is listed with a ZIP code of 02081, corresponding to Walpole, Massachusetts, where BJPCo is located. The government will not reimburse any costs incurred in response to this solicitation, and it reserves the right to amend or cancel the solicitation without obligation.

Nswc Philadelphia Division

POSTED

about 19 hours ago

DEADLINE

FY26 - FY31 Vance AFB Fire Extinguisher BPA

Solicitation # FA302926Q0002

The contract covers inspection, testing, maintenance, and repair of fire extinguishers at Vance Air Force Base across all facilities from fiscal year 2026 through 2031, under the BPA titled FY26 - FY31 Vance AFB Fire Extinguisher BPA. All work must strictly adhere to NFPA standards, Unified Facilities Criteria, Air Force fire safety policies, and the specified Statement of Work. The solicitation number is FA302926Q0002, posted on July 8, 2026, with a deadline for responses on August 7, 2026. It is classified under NAICS code 811310 for fire protection equipment services and is managed by the Department of Defense through the FA3029 71 Ftw Cvc office located in Enid, Oklahoma, with the place of performance also in Enid at ZIP code 73705. Primary point of contact is LeeAnna Nelson with phone and email provided, and secondary contact is 2d Lt Layla Gutierrez, both reachable for inquiries related to the solicitation.

FA3029 71 Ftw Cvc

POSTED

about 19 hours ago

DEADLINE

15--WING ASSEMBLY,AIRCR- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RTC15

The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) in Philadelphia intends to award a sole-source contract for the repair of two flight-critical wing assembly parts: NSN 1560-016002718 with part number 74A140001-1035 and NSN 1560-016002719 with part number 74A140001-1036, with a total quantity of ten units each. Delivery will be FOB origin, and the work requires engineering source approval due to the specialized design, proprietary technical data, and unique manufacturing or repair knowledge held exclusively by previously approved sources. The Government has determined that no other source possesses the necessary data or capability to maintain part quality, and the time required to qualify an alternate source would delay delivery beyond operational needs. Only previously approved sources have been solicited, and any new offeror must submit comprehensive source approval documentation in accordance with NAVSUP WSS brochures, including evidence of experience with similar items or proof of pending approval. Proposals lacking complete documentation or verification of prior submission will be disqualified. The solicitation number is N0038326RTC15, with a response deadline of September 21, 2026, and the point of contact is Christina M. Foley. While this is a presolicitation notice not intended for competitive bids, all responsible sources may submit capability statements within 45 days, and the Government retains full discretion on whether to proceed with sole-source award. The contract is subject to applicable trade agreements including the Buy American Act and the World Trade Organization Government Procurement Agreement.

Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in about 2 months

PUMP, CENTRIFUGAL

Solicitation # 70Z08026QCV177

Sflc Procurement Branch 1(00080)

POSTED

about 19 hours ago

DEADLINE

More opportunities from Michigan → DTMB

Same awarding agency

Data Security and Confidentiality Compliance SupportThe contract titled Data Security and Confidentiality Compliance Support is a subcontract issued by the Michigan Department of Technology, Management and Budget to ensure stringent protection of state data throughout the duration of the engagement. It mandates strict measures to prevent any unauthorized disclosure, access, or use of sensitive information, requiring all parties to implement comprehensive security protocols aligned with state and federal standards. The contractor is obligated to maintain the integrity and confidentiality of data at all stages of performance, including during storage, processing, and transmission. Upon completion of the subcontract, the contractor must securely return all state data to the agency or, if directed, permanently destroy it using methods that render recovery impossible. This requirement applies to all forms of data, whether digital or physical, and includes any copies, derivatives, or backups created during the project. The contract emphasizes accountability and compliance, with no tolerance for lapses in data handling procedures. The solicitation was posted on August 5, 2026, with responses due by August 10, 2026, under NAICS code 561499, and is accessible through the Michigan state procurement portal.

All Other Business Support Services

POSTED

DEADLINE

Logistics, Packaging, and Delivery ServicesThe contract titled Logistics, Packaging, and Delivery Services requires the contractor to handle all aspects of packaging, freight coordination, and final delivery of goods to locations designated by the state, ensuring secure handling procedures and accurate labeling throughout the process. The work is governed under NAICS code 484220, which pertains to truck transportation of freight and general freight, indicating a focus on ground-based logistics operations. The contract is classified as a subcontract and is being managed by the Michigan agency DTMB, with performance obligations tied to state-designated destinations within the jurisdiction. The solicitation was posted on August 5, 2026, and responses must be submitted by noon on August 10, 2026. While specific details about the place of performance and point of contact are not provided, the contract implies a statewide operational scope requiring reliability, compliance with state standards, and precise execution of delivery schedules. All packaging and freight activities must meet state-mandated security and identification protocols to ensure product integrity and traceability. Interested parties can access the full solicitation details through the provided Michigan state portal link.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Construction or Maintenance Services Subject to Prevailing WageThis contract covers construction and maintenance services at state facilities in Michigan, including facility upgrades, cabling, and site work, all of which are subject to the Michigan Prevailing Wage Act, requiring contractors to pay laborers the established prevailing wage rates for their trade and locality. The work is classified under NAICS code 238210, indicating it falls under electrical and other construction installation services, and is structured as a subcontract opportunity issued by the Michigan Department of Technology, Management and Budget. All laborers performing work under this contract must be compensated in accordance with state prevailing wage standards, ensuring compliance with Michigan’s labor regulations for public projects. The solicitation was posted on August 5, 2026, with a response deadline set for August 10, 2026, at 12:00 PM Eastern Time, indicating a short window for proposal submission. The place of performance is at state-owned facilities across Michigan, though specific locations are not detailed in the posting. The contract opportunity is accessible via the Michigan state procurement portal, and while no set-aside provisions or organization type restrictions are specified, bidders must be prepared to demonstrate adherence to prevailing wage requirements and the ability to perform the necessary construction or maintenance tasks at state facilities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Professional IT and Systems Integration ServicesThe contract titled Professional IT and Systems Integration Services is a subcontract issued by the Michigan Department of Technology, Management and Budget, aimed at securing professional services for systems integration, software customization, deployment, and technical support. These services must fully align with state data and intellectual property requirements, ensuring compliance with all applicable regulations and security standards. The solicitation was posted on August 5, 2026, with a response deadline of August 10, 2026, and is classified under NAICS code 541511, which pertains to custom computer programming services. The place of performance and specific office address details are not specified, but the work is expected to support state-level operations in Michigan. Interested parties must submit their proposals through the designated Michigan state procurement portal by the stated deadline.

Custom Computer Programming Services

POSTED

DEADLINE

IT Hardware and Software SupplyThe contract titled IT Hardware and Software Supply seeks commercial off-the-shelf software and hardware including servers, desktops, and laptops along with associated documentation, all of which must be defect-free and compliant with established industry standards. The solicitation is classified as a subcontract under NAICS code 511210, issued by the DTMB agency in Michigan, with a response deadline of August 10, 2026 at 12:00 PM. All deliverables are expected to meet rigorous quality benchmarks without customization or specialized development, ensuring rapid deployment and interoperability. The place of performance and point of contact details are not specified, and there is no set-aside designation applied to this procurement. Interested parties must submit responses through the provided Michigan state procurement portal before the deadline.

Software Publishers

POSTED

DEADLINE

RFQ-171-260000000410-2 | 511/26081.CAK; Camp Grayling Building 8

Solicitation # RFQ-171-260000000410-2

The solicitation RFQ-171-260000000410-2 seeks proposals for work related to Camp Grayling Building 8 in Michigan, with a posted date of August 5, 2026, and a response deadline of August 12, 2026, at 6:00 PM Eastern Time. The contract is issued by the Michigan Department of Technology, Management and Budget under the SLED classification, indicating it is targeted toward state, local, or educational government entities. There is no specified set-aside type or NAICS code provided, and the place of performance is located in Michigan with no specific city defined beyond the Camp Grayling location. The primary point of contact is Kristi Zakrzewski, reachable via email at zakrzewskik@michigan.gov or phone at 517-243-5669, with a secondary contact listed under DTMB at 248-207-7950. The solicitation is hosted on the Michigan Sigma procurement portal, where full details and submission guidelines can be accessed through the provided URL.

Janitorial Services

POSTED

DEADLINE

ITN-171-260000000034-1 | ITN 260000000034 Cisco Systems Inc

Solicitation # ITN-171-260000000034-1

The contract under solicitation number ITN-171-260000000034-1 issued by the Michigan Department of Technology, Management and Budget (DTMB) is a solicitation for services from Cisco Systems Inc, targeting state, local, and educational government entities. It was posted on August 5, 2026, with a response deadline of August 12, 2026, at 7:00 PM Eastern Time, indicating a tight turnaround for proposals. The contract does not specify a set-aside type or NAICS code, suggesting it is open to all qualified respondents without demographic or size-based restrictions. Performance is expected to occur across various locations within Michigan, with no specific city designated, allowing flexibility for statewide implementation. Primary point of contact for inquiries is Kristine Mills at millsk11@michigan.gov or 517-242-6402, with DTMB listed as a secondary contact using the same phone number. Potential respondents should reference the official UI link provided to access solicitation details, submission guidelines, and any supplemental documentation directly through Michigan’s procurement portal. The scope of work likely involves procurement of Cisco networking equipment or related IT services, given the vendor’s identity, though exact deliverables are not detailed in the provided metadata.Interested parties must ensure timely submission prior to the deadline and align responses with the state’s procurement requirements as outlined in the official solicitation materials.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

RFQ-171-260000000402-2 | 761/24176.SAR; Cheboygan MGP - Direct Contact Excavation

Solicitation # RFQ-171-260000000402-2

The contract solicitation RFQ-171-260000000402-2 pertains to direct contact excavation work at the former Cheboygan Manufactured Gas Plant (MGP) site in Michigan, with a focus on environmentally regulated soil removal, transportation, and disposal totaling approximately 393 tons of contaminated material, supplemented by 407 tons of clean fill and 87 tons of 6-inch clean gravel top layer. Work includes mobilization, utility clearance, surveying, erosion and sediment control, dewatering, demobilization, and adherence to Michigan Part 201 Non-Residential Direct Contact Criteria for soil contamination, as well as compliance with MDOT Standard Specifications, EGLE Best Management Practices, and applicable ASTM, ANSI, and RCRA standards. All construction activities must occur on-site, with final acceptance contingent upon full compliance with contract documents, successful inspections, and certification by the Owner’s Professional. The contract includes a $10,000 provisional allowance but lacks detailed unit pricing for other baseline items, leaving the total estimated value unresolved beyond this allowance. Proposals must be submitted electronically via the State of Michigan’s SIGMA VSS portal by August 12, 2026, at 2:00 PM ET, with mandatory attachments including the Bid Summary Form, Bid Bond, Performance Bond, Payment Bond, Asbestos Abatement Attestation, and certifications for Michigan residency and Qualified Disabled Veteran status if claimed. The solicitation specifies a best-value award process with price dominating for contracts under $250,000 and a trade-off analysis applied for higher-value bids within 10% of the lowest, evaluating technical approach, personnel qualifications, management plans, and ability to complete work on schedule. Specific requirements include adherence to Michigan state prevailing wage rates, a minimum of 50% Michigan-resident workforce, compliance with Public Act 59 of 2024 for asbestos abatement, and a de facto option allowing up to ±50% variation in quantities without price adjustment. The contractor must provide a revised progress schedule with key personnel identified and maintain on-site security measures, including possible fire watches during non-working hours. All payments are processed exclusively via Electronic Funds Transfer through SIGMA VSS using the DTMB-0440 payment request form, and accountability for material disposal, waste manifests, and documentation is strictly enforced. No federal clause numbering is present in the documentation, and while

Site Preparation Contractors

POSTED

DEADLINE

RFQ-171-260000000423-1 | MS-ENV-21 #10 SPECIAL WINDOW ENVELOPE

Solicitation # RFQ-171-260000000423-1

The solicitation RFQ-171-260000000423-1 for MS-ENV-21 #10 SPECIAL WINDOW ENVELOPE is issued by the Michigan Department of Technology, Management and Budget under the SLED classification with a posted date of August 5, 2026, and a response deadline of August 10, 2026 at 12:00 PM Eastern Time. The requirement pertains to a specialized envelope product intended for windowed applications, though specific technical specifications or quantities are not detailed in the posted data. Performance is expected to occur within the state of Michigan, with no designated city or ZIP code specified for delivery location. The primary point of contact is Andrew Hale, reachable via email at halea3@michigan.gov or by phone at 5176360092, with Dtmb listed as the secondary contact using the same phone number. The solicitation is accessible online through the Michigan Sigma procurement portal, and no set-aside status or NAICS code is indicated, suggesting it is open to general competition without reserved categorization.

Office Supplies and Stationery Retailers

POSTED

DEADLINE

Plugging of Site Pits and DrainsThe contract titled Plugging of Site Pits and Drains requires the seal and plugging of all existing pits and drains across various locations within Michigan to mitigate the risk of environmental contamination. This subcontract, identified under NAICS code 238990, is issued by the DTMB Michigan agency and is open for bids with a response deadline of August 12, 2026. Work must be performed at multiple unspecified site locations, with no single fixed address provided for performance. The project demands precise execution to ensure all hazardous openings are permanently sealed in compliance with environmental protection standards, though specific technical specifications or regulatory thresholds are not detailed in the provided data. Bidders must be prepared to handle site assessments, material selection, and remediation procedures that meet federal and state environmental requirements, with all work expected to be completed under the terms of a subcontracting arrangement.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Utility Locate and Disconnect ServicesThe contract seeks qualified contractors to locate, identify, and safely disconnect all utilities within designated project areas, with specific focus on gas and electrical lines. Services must be performed with strict adherence to safety protocols to prevent damage to infrastructure and ensure public and worker safety. The work will occur across multiple locations within Michigan, as the place of performance is listed as various sites without specific civic boundaries. The contract is classified as a subcontract under NAICS code 221122, indicating it relates to utility system construction activities, and was posted on August 4, 2026, with a deadline for responses set for August 12, 2026. The contracting entity is the DTMB, representing the Michigan state agency, and while no set-aside provisions or point of contact details are provided, interested parties must submit responses through the designated state procurement portal by the stated deadline.

Electric Power Distribution

POSTED

DEADLINE

Site Restoration ServicesThe contract titled Site Restoration Services pertains to the post-demolition rehabilitation of multiple sites across Michigan, requiring comprehensive land restoration activities such as grading, seeding, and erosion control measures to reestablish and maintain vegetated grass areas. The work must ensure site stability and environmental compliance following demolition operations, with all tasks focused on returning the ground to a sustainable, grass-covered condition suitable for long-term use. The North American Industry Classification System code 561730 indicates this is a site preparation and clean-up service, specifically oriented toward land reclamation and landscaping. This is a subcontract opportunity issued by the DTMB Michigan agency with a response deadline of August 12, 2026, at 6:00 PM Eastern Time, and it was posted on August 4, 2026. Performance locations are varied across the state with no single fixed address, meaning contractors must be prepared to mobilize to multiple locations as needed. There is no specified set-aside type, and no point of contact information is provided within the data. Subcontractors interested in this opportunity must access the required information through the provided Michigan state procurement portal link.

Landscaping Services

POSTED

DEADLINE