Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

RFQ - Supply and Delivery of Mobile Slow-Speed Shredder (Organics)

Open
CVRD-26-044International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Comox Valley Regional District is soliciting quotations for the supply and delivery of one new, track-mounted, diesel-powered, twin-shaft slow-speed primary shredder intended for solid waste processing. This equipment is specifically required for organics processing to enhance the district's waste management capabilities. The solicitation, identified as CVRD-26-044, was posted on November 17, 2026, with a response deadline of December 10, 2026. There is no specific set-aside status associated with this procurement.

General Info

CVRD seeks quotes for a diesel-powered primary shredder for solid waste processing.

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyComox Valley Regional District
ContactsNo contacts available
OfficeCAN
Organization / AgencyComox Valley Regional District
Office AddressCAN
ContactsNo contact information available

Full Description

Show more
The Comox Valley Regional District (CVRD) is seeking quotations for one new, track-mounted, diesel-powered, twin-shaft slow-speed primary shredder for solid waste processing.

Similar Contracts

Same NAICS industry code

NAICS: 333248
New
Federal
Intent to Award Sole Source-SPARE PARTS
Solicitation # 2031ZA27N00008
The Bureau of Engraving and Printing (BEP), through the Office of the Chief Procurement Officer, intends to award a sole source, firm-fixed-price contract to Buhler Inc. for proprietary spare parts used on the Three-Mill SDVE 1300. The required components include a heat exchanger with a fastening bracket (P/N UNS-46481-036), a pressure-reducing unit passage 1 (P/N SDVE-83048-810), and a spur gear left Z=98 (P/N SFL-20095-190). This procurement is being conducted under FAR Subpart 6.302-1(a)(2)(ii), as Buhler Inc. is identified as the only responsible source capable of satisfying the agency's requirements. The contract is classified under NAICS code 333248 for All Other Industrial Machinery Manufacturing and is designated as a Small Business Set Aside - Total. Administrative requirements for the contract include electronic payment requests via the Invoice Processing Platform (IPP) and strict adherence to packing slip and shipping label standards to avoid shipment rejection. Deliveries are accepted at the Washington, D.C. Annex Building, the Landover Warehouse in Maryland, and the Western Currency Facility in Texas, with specific scheduling requirements for the D.C. location. The contract incorporates a wide range of FAR clauses covering ethics, whistleblower protections, supply chain security, and labor standards, including prohibitions on certain foreign telecommunications and software entities.
Office Of The Chief Procurement Officer

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333248
New
Federal
Resonant Acoustic Mixer (RAM) System Upgrade
Solicitation # N6893627R0004
The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake, is seeking the acquisition of proprietary aftermarket equipment, hardware, and control systems for existing Resodyn LabRAM II, OmniRAM, and RAM 5 Resonant Acoustic Mixers. This effort is part of the DoN26 Capital Investment Program project for Continuous Acoustic Mixer Processing (CAMP), aimed at transitioning Continuous Acoustic Mixing from laboratory-scale to large-scale production of energetic materials. The scope of work includes the production, delivery, installation, testing, and training of Government personnel for various RAM system items, including mix vessels, control systems, vacuum and earth detection systems, and water heater/chiller units. The government intends to procure these requirements on a sole source basis from The Falcon Project, Ltd., in accordance with FAR 6.103-1. The contractor will be responsible for proper crating and packing for shipment to China Lake, CA, and must perform both pre-factory and on-site factory acceptance testing. Strict adherence to safety standards is required, including NAVSEA OP 5 and the China Lake Safety Manual, with specific requirements for hazardous area equipment to be crevice-free to prevent the accumulation of explosives. Additionally, a Cyber Maturity Model Certification (CMMC) Level 1 is anticipated, and all Controlled Unclassified Information (CUI) must be handled and encrypted according to DoDI 5200.48.
Naval Air Warfare Center

POSTED

about 21 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333248
New
Federal
Automated Digital Flatbed Cutting and Routing Equipment
Solicitation # FA487727QA028
The 355th Contracting Squadron is conducting market research to identify capable businesses for the procurement of two automated digital flatbed cutting and routing systems, specifically Colex Sharpcut Pro or equivalent. The requirement includes two distinct systems: System 1 must have a minimum active cutting area of 120 by 60 inches with automated board feeding and continuous-loading capability, and System 2 must have a minimum active cutting area of 80 by 124 inches. Both systems must feature motorized conveyor beds, vacuum hold-down, and capabilities for cutting, routing, creasing, and marking of rigid and flexible materials. Technical requirements include optical registration, table mapping, barcode-enabled job retrieval, and interoperable software and tooling to allow file transfers without material rework. The scope of work encompasses turnkey delivery F.O.B. Destination to Davis-Monthan AFB, Arizona, including installation, configuration, and three days of on-site operator training for each system. Vendors must provide at least one year of warranty for non-consumable parts and labor, along with one year of remote or telephone technical support. This effort is categorized under NAICS code 333248 and PSC 3610. There is no set aside used for this requirement. Interested businesses must submit a completed Vendor Capability Questionnaire and detailed product literature to the Contracting Officer by November 25, 2026, at 8:00 AM MST.
FA4877 355 Cons Pk

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
International
Selective Laser Sintering (SLS) 3D Printing System
Solicitation # 26-58097-B
The National Research Council Canada (NRC) is soliciting offers for a new, unused, commercially available Selective Laser Sintering (SLS) 3D Printing System to support solvent-free production and prototyping of battery materials at the Clean Energy Innovation Research Centre. This open tendering process is subject to the Policy on Reciprocal Procurement, meaning only Canadian suppliers are eligible. The contract will be awarded to the responsive bidder who meets all mandatory technical criteria and offers the lowest price. All deliverables, including the hardware, software, and at least 2 kg of compatible powder, must be received by January 29, 2027, at the delivery location in Mississauga, Ontario, under DAP Incoterms 2020. The required system must be a laser-based, open-materials SLS system compatible with Industry 4.0 principles, featuring a built-in laser protective enclosure, a minimum build volume of 100 mm x 100 mm x 100 mm, and a printing speed of 10 mm/h or higher. Mandatory technical requirements include a minimum printable wall thickness of 0.5 mm or less on the XY plane and the ability to use powdered feedstock with a mean particle size D50 from 1 µm to 100 µm. The successful contractor must provide on-site installation, six hours of training, and ten hours of technical support over one year. Bidders must adhere to environmentally preferable packaging standards and provide all necessary safety data sheets for materials. Offers must be submitted by November 30, 2026, and include separate technical, financial, and certification documents.
National Research Council of Canada

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333248
New
Federal
Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO
Solicitation # W519TC26ACSO
The Army Contracting Command - Rock Island is seeking qualified vendors to modernize the Automated Fluidized Bed Mixer Facility at Pine Bluff Arsenal through a Commercial Solution Opportunity (CSO). The project requires an automated, high-precision mixing, granulation, and drying system to improve the production of colored smoke energetics. Key technical requirements include a system capacity of 800-1200 lbs, a minimum operational availability and batch-to-batch repeatability of 95%, and raw material weighing accuracy within ±1.5%. Equipment must be rated for Class II Div 1 F and G hazardous environments and include a high-speed fire detection and suppression system with a response time of 500ms or faster. There is no set aside used for this solicitation. The acquisition process is conducted in three phases: a Phase 1 Solution Brief (5-page paper or 15-slide deck), a Phase 2 Pitch presentation, and a Phase 3 Full Quote. Final awards will be Firm-Fixed-Price contracts based on technical merit, innovation, agency importance, and price reasonableness. Vendors must provide a detailed Statement of Work, a logistics plan for on-site installation and commissioning at Pine Bluff Arsenal, and a granular cost breakout. All submissions must be unclassified, pre-scanned for malicious code, and submitted in Word, PDF, or PowerPoint format.
W6QK Acc-Ri

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
DIBBS
COVER GLASS, MICROSCOPE
Solicitation # SPE2DH-27-T-0643
The Department of Defense, through the DLA Troop Support Medical Supply Chain, has issued solicitation SPE2DH-27-T-0643 for the procurement of microscope slide cover glass (NSN 6640-01-718-7221). The required items must be composed of high-quality, non-corrosive, and non-fogging borosilicate glass that is optically clear, colorless, and exhibits low auto-fluorescence. Each cover glass must measure 22mm x 22mm with a thickness of #1 (0.13mm to 0.17mm). The supplies are to be delivered in 1oz containers, with 10 containers per package, and must be cleaned and washed for immediate use in all levels of microscopy. The total quantity requested is 2 packages, with a delivery requirement of 85 days after award (ADO) and FOB Destination. This solicitation is designated as having no set-aside used. The procurement is governed by NAICS code 333248 and requires compliance with FDA Regulation 864.3010, Class I. Packaging must be commercial and adhere to MIL-STD-2073-1E and RP001, while marking must follow Medical Marking Standard No. 1. Invoicing and payment requests must be processed electronically via the Wide Area WorkFlow (WAWF) system. The contract incorporates various FAR and DFARS clauses, including requirements for basic safeguarding of contractor information systems and prohibitions on the acquisition of covered defense telecommunications equipment.
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 4 days
View Details

More opportunities from Comox Valley Regional District

Same awarding agency

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS