Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Rigaku Supermini 200

Active

80NSSC26938426QFederal

Response Deadline07/23/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Rigaku Supermini 200 is a special notice issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration for the procurement of a Rigaku Supermini 200 instrument. It was posted on July 20, 2026, with a response deadline set for July 23, 2026, at 6:00 p.m. Eastern Time. The NAICS code assigned is 334516, indicating classification under Laboratory Analytical Instrument Manufacturing. The office address is listed at Stennis Space Center in Mississippi, while the place of performance is specified as Houston, Texas, with a zip code of 77058. The primary point of contact for inquiries is Cara Craft, reachable via email at cara.s.craft@nasa.gov. No set-aside type is designated for this opportunity, meaning it is open to all eligible contractors without preferential treatment based on business size or status. All details and requirements are to be referenced in the attached solicitation documents.

General Info

NASA seeks Rigaku Supermini 200 instrument; bid due July 23, 2026, performance in Houston, Texas.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Houston, TX, 77058, USA

Set-Aside

NONE

Documents

(2)

SATPC0041831+Tab+04+4+SOW.pdf

PDF

SATPC0041831+Tab+07+Capability+Statement.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedJul 20

special-notice

Response DeadlineJul 23

Submission deadline

Response Deadline

07/23/2026, 06:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

Cara Craft

contact@example.gov

Full Description

Show more

Please see the attached documents for details.

Similar Contracts

Same NAICS industry code

Sole source notice for an Gas Cluster Ion Beam (Argon Source) SystemThe University of Mississippi is procuring a lone lonoptika GCIB 10S Gas Cluster Ion Beam (Argon Source) System through a sole source justification under FAR 6.302-1, with a total estimated value of $121,740. This acquisition is non-competitive due to the system’s unique and proprietary capabilities required to integrate with existing custom instrumentation in the Department of Chemistry & Biochemistry, including real-time cluster measurement, sample current imaging, and ultra-thin film sputtering over a precise 7x7 mm area—functions unmatched by any commercially available alternative. The solicitation, identified as Smart number 9270-27-R-RFIN-00001 and RFx 3150006943, was posted on July 20, 2026, with responses due by August 4, 2026, at 10:00 AM CST. All objections to the sole source status must be submitted by the deadline via email to solesource@olemiss.edu (with a copy to purchase@olemiss.edu), or via mail or hand delivery to the university’s procurement office in University, Mississippi, and must include full contact details and a statement of the objector’s capabilities to meet the technical requirements. The place of performance and acceptance is the university campus, where the system will be installed and operated. No standard FAR clauses, packaging or marking specifications, military standards, or evaluation factors are included in the solicitation, as the procurement relies solely on the technical necessity and exclusivity of the ion source model. The contract does not specify payment processes, accounting codes, invoicing systems, or delivery terms such as FOB, and no formal COR, COTR, or PCO is designated beyond Jeff Wells, Procurement Manager, who serves as the primary point of contact. Vendor representations, certifications, or socioeconomic status information are not applicable, as the procurement is not subject to small business set-asides or competition. The system will be delivered as a single unit with no options or line items, and acceptance will be based on meeting the defined technical performance criteria without reference to formal industry standards.

UNIVERSITY of MISSISSIPPI

POSTED

about 14 hours ago

DEADLINE

Resolver Support Unit Manufacturing and AssemblyThe contract entails the full manufacturing and assembly of 30 resolver support units, covering every phase from production and quality control to packaging and final shipment. The work is performed under a subcontract arrangement for the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 334516 indicating classification within the navigational, measuring, electromedical, and control instruments manufacturing sector. All deliverables must meet stringent defense standards, ensuring reliability and precision for operational use. The contract was posted in July 2026 and is managed under the reference number SPE7L126P9036, with performance expectations aligned to meet the needs of a federal defense program. No set-aside provisions are specified, and the place of performance is not detailed, suggesting flexibility in location so long as the final units are delivered in compliance with contractual requirements.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Supply of ARM, SWITCH ACTUATOR (NSN 5930-01-298-3505)The contract involves the manufacture and supply of twelve precision electromechanical switch actuators fully compliant with the military National Stock Number (NSN) 5930-01-298-3505, ensuring adherence to stringent defense standards for performance, reliability, and environmental resilience. All units must meet exacting traceability requirements, including full documentation of materials, batch numbers, manufacturing processes, and quality control inspections to support military logistics and maintenance operations. Production is governed under NAICS code 334516, indicating specialized electronic component manufacturing, and the work is being procured as a subcontract under the Defense Logistics Agency, representing the Department of Defense’s centralized supply chain. The contract was posted on July 20, 2026, and is identified by the award reference SPE7M824V2252, though no solicitation number is provided, suggesting it may have been issued directly through a pre-qualified vendor channel. Place of performance and point of contact details are omitted from the record, but the work is intended to support DLA’s broader mission of equipping and sustaining U.S. military systems. The absence of set-aside information indicates the opportunity is open to any qualified supplier, regardless of business size or status, with the sole focus on technical compliance and fulfillment of military-grade specifications.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Electrostatic Discharger Manufacturing and AssemblyThe contract entails the full production, assembly, testing, and delivery of 62 electrostatic dischargers in strict adherence to military specifications, ensuring all components and processes meet rigorous defense standards. Quality assurance is governed by ISO 9001:2008 and AS9100 certification requirements, with explicit protocols in place to prevent the inclusion of counterfeit parts throughout the supply chain. The work falls under NAICS code 334516, indicating classification within the other electronic component manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. All activities are expected to comply with the technical and procedural mandates of the military supply chain, with delivery obligations tied directly to mission-critical defense operations.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

RFID Tagging and Smart Labeling ServicesThe contract requires the application of item-level passive RFID tags compliant with ISO/IEC 18000-6C standard to glove inserts, with each tag assigned a unique EPC number that is electronically linked to the National Stock Number and unit pack information. These tags must be readable by VIM and ASAP systems, ensuring seamless integration with existing Department of Defense logistics and inventory management platforms. The tagging process must adhere to MIL-STD-129 requirements for military uniform labeling and marking, guaranteeing consistency, durability, and reliability in field conditions. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 334516 and is focused on smart labeling services to enhance supply chain visibility and tracking accuracy. The work must be performed in compliance with all federal defense standards, though the specific place of performance and point of contact are not specified. The contract was posted in July 2026 and is accessible through the DIBBS portal, indicating it is part of a broader effort to modernize logistics operations through automated identification technologies.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Electro-Mechanical Actuator SupplyThe contract entails the supply of three electro-mechanical actuators identified by NSN 4810-01-736-5020, manufactured to meet stringent military specifications and technical requirements established by the Defense Logistics Agency. These components are critical to defense systems and must comply with all applicable DLA standards to ensure operational reliability and interoperability in military environments. The award is classified as a subcontract under the NAICS code 334516, indicating it pertains to the manufacturing of other electronic components and equipment. The contract was posted on July 20, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. While specific performance locations and point of contact details are not provided, the procurement is tied to the official DLA contract record identified by the number SPE7MC26P3155. The absence of set-aside designations suggests the opportunity is open to all eligible suppliers, with no preference given to small businesses or other categories. Delivery and compliance are expected to align with DLA’s logistical and quality assurance protocols for defense-critical hardware.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Manufacture and Supply of Pressure Switches

ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

RF Interference Filter Manufacturing and TestingThe contract requires full lifecycle production, testing, and quality assurance of RF interference filters adhering to military specifications, encompassing design validation, environmental testing, and certification to ensure compliance with defense standards. All phases must be executed with strict adherence to technical requirements, including performance under extreme conditions, to guarantee reliability in operational environments. The work is scoped as a subcontract under the NAICS code 334516, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. Production must align with Department of Defense quality and documentation protocols, and all deliverables will be subject to rigorous inspection and approval processes before acceptance. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a tight window for proposers to submit qualified bids. The contracting activity is managed by the Active Devices Division of the Department of Defense, and while no set-aside classification is specified, the nature of the work suggests a focus on specialized defense electronics manufacturing. The place of performance at Tinker AFB implies close coordination with military logistics and maintenance infrastructure, and successful contractors must demonstrate proven capability in high-reliability RF component production, with relevant experience in military-grade supply chains.

ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

WATER TESTING KIT, BThe contract is for the procurement of six Water Testing Kits, Bacteriological, identified by NSN 6665-00-682-4765 and part number XX63WTK00 or TRM101202, each designed for 115V/60Hz North American electrical systems without included adapters for European 220V/50Hz applications. All items must comply with stringent technical and quality requirements referenced from the DLA Master List, with packaging and preservation strictly adhering to MIL-STD-2073-1E Appendix D for kits, and marking per MIL-STD-129. Each unit must be accompanied by two copies of a technical manual meeting MIL-M-7298 standards, with preliminary drafts submitted for review by the Director of Medical Materiel, DLA Troop Support, prior to final approval. Fifteen copies of the approved manual must be delivered to the contracting officer unless a waiver is granted for previously accepted manuals from within the prior two years. The kit is classified as a critical application item and must be delivered FOB origin within 168 days of contract award, with zero variance allowed in quantity. Delivery is required to DLA Distribution Cherry Point in North Carolina by January 5, 2027, with the original required delivery date set for September 21, 2026. Packaging must be palletized per DLA requirements, and all hazardous material handling follows IP025 guidelines, with transportation details outlined in DLAD procedural notes. The contract was issued under solicitation SPE7M1-26-T-196C with a response deadline of July 20, 2026, and is managed by the Department of Defense under NAICS code 334516.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

MEASURING TUBE, GAS ANAThe measuring tube for gas analyzer is designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million for one liter of air. It is a glass tube with rounded, melted ends and is packaged in quantities of ten per package designated as PG. The item is identified by NSN 6630-12-189-3126 and is governed by the procurement document SPE2DH-26-T-5302. As a Type I (Code M) shelf-life item, it must have a non-extendable shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of Medical Marking Standard No. 1. Packaging must be commercial grade, sealed to prevent damage or breakage, and placed in suitable exterior shipping containers that ensure safe delivery at the lowest carrier rate to the specified point of delivery. All markings must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is subject to DLA packaging requirements, potential exposure to covered defense information, and requirements for removal of government identification from non-accepted supplies. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and delivery is required within 20 days after award for a quantity of eight packages.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

MAINTENANCE SERVICE AGREEMENT FOR MOLECULAR DIAGNOSTIC INSTRUMENT, PORTLAND AREA

Indian Health Service

POSTED

about 20 hours ago

DEADLINE

Purchase of Biacore T200 Surface Plasmon Resonance Service Plan.

National Institutes Of Health Olao

POSTED

about 20 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Baker Hughes (Mooney) flex flow tubes

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 20 hours ago

DEADLINE

1 CryoDax 8 Low Temperature Chiller System thermal conditioning unit

Analytical Laboratory Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

AAR Mobility SystemsAAR Mobility Systems is the subject of a small business set-aside solicitation issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the solicitation number 80NSSC26937581Q and a posting date of July 20, 2026. The opportunity is fully reserved for small businesses under FAR 19.5 and falls under the NAICS code 332999 for other miscellaneous manufacturing. The offer response deadline is set for July 24, 2026, at 9:00 p.m. Eastern Time, with the primary point of contact being Tracy Bremer at tracy.g.bremer@nasa.gov. The contract office is located at Stennis Space Center, Mississippi, while the place of performance is designated as Edwards, California, 93523. Despite the structured framework of the solicitation, critical sections including the Statement of Work, evaluation factors, contract clauses, special requirements, packaging guidelines, inspection criteria, deliverables, pricing details, and representations or certifications are inaccessible due to system errors or unauthorized access. The estimated contract value and specific scope of supplies or services are not provided in the available data, with all detailed content restricted to external attachments referenced in the description as the RFQ and SOW.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

MDR Control Storage module Receiver (MCSRe)NASA/NSSC is proceeding with a sole source contract award to SAFRAN DEFENSE & SPACE, INC. for the MDR Control Storage module Receiver (MCSRe), as the company is the sole provider of this specific item. The procurement will be conducted under FAR Part 12 as a commercial acquisition, with performance taking place at NASA’s Armstrong Flight Research Center in Edwards, California. The effort is classified under NAICS code 334511, and the solicitation number is 80NSSC26938144Q. Interested parties may submit written capabilities and qualifications to the primary point of contact, Tracy Bremer, no later than 4:00 p.m. Central Standard Time on July 22, 2026, to assist the government in determining whether competition is warranted; however, the decision to proceed without competition remains solely at the government’s discretion. Oral submissions are not accepted, and the NASA FAR Supplement clause 1852.215-84 on the Ombudsman applies, with resources available through the designated procurement ombudsman listing. The solicitation was posted on July 20, 2026, and responses must be submitted via written means by the stated deadline.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

Texas Instruments Commercial Off the-Shelf (COTS) products for ABLE Seed Laser

Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solarcore Textile (0.8mm thick polymer aerogel-infused non-woven nomex/kevlar)

All Other Miscellaneous Textile Product Mills

POSTED

about 20 hours ago

DEADLINE

Orchard Annual Harvest Support RenewalThe Orchard Annual Harvest Support Renewal contract, identified by solicitation number 80NSSC26938913Q, is a special notice issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The opportunity is posted for response by July 23, 2026, at 6:00 p.m. Eastern Time, with the primary point of contact being Cara Craft, reachable via email at cara.s.craft@nasa.gov. The contract falls under NAICS code 541511, indicating it pertains to computer systems design services, and the performance location is designated as Houston, Texas, 77058, while the contracting office is based at Stennis Space Center, Mississippi, 39529. No specific set-aside type is indicated, and the contract is being managed by the Office of the NASA Shared Services Center. All detailed terms, scope, and requirements are to be derived from the attached documentation referenced in the contract description.

Custom Computer Programming Services

POSTED

about 20 hours ago

DEADLINE

Elite Coriolis Meter 1/4 Inches (DN6), 316L stainless steelNASA/NSSC is seeking to award a sole source contract to CHASE SUPPLY, INC. for the procurement of Elite Coriolis Meters sized 1/4 inch (DN6) constructed of 316L stainless steel, determined to be available only from this vendor under FAR 12.102(a). The acquisition is being handled by NASA Shared Services Center with performance taking place at NASA Armstrong Flight Research Center in Edwards, California, utilizing commercial item procedures under FAR Part 12. The NAICS code for this procurement is 334513. Interested parties may submit written capabilities and qualifications to challenge the sole source determination by 4:00 p.m. Central Standard Time on July 22, 2026; oral communications are not accepted. The Government retains full discretion to decide whether to proceed without competition based on these submissions. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and the Center Ombudsman for this acquisition can be referenced via the official NASA procurement website. The primary point of contact is Procurement Specialist Tracy Bremer at tracy.g.bremer@nasa.gov.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 20 hours ago

DEADLINE

Screen candidate subjects for eligibility to participate in a spaceflight studyNASA is seeking qualified candidates to screen for eligibility in a spaceflight study, aiming to identify individuals who meet specific physical, medical, and psychological criteria for participation in missions related to human spaceflight research. The opportunity is issued under solicitation number 80NSSC26937596Q with a response deadline of July 22, 2026, at 6:00 PM Eastern Time, and is categorized as a special notice under NAICS code 611310, indicating an educational support services classification. All proposals must be submitted through the official SAM.gov portal and are to be managed by the NASA Shared Services Center based at Stennis Space Center, Mississippi, with the primary place of performance designated as Houston, Texas, where candidate evaluations and related activities will occur. The primary point of contact for inquiries is Cara Craft, reachable via email at cara.s.craft@nasa.gov, who will handle all communications regarding qualifications, submission requirements, and selection procedures.

Colleges, Universities, and Professional Schools

POSTED

DEADLINE

Senior Executive Fellows Leadership TrainingNASA Shared Services Center is seeking to award a sole source contract to the President and Fellows of Harvard College for the delivery of Senior Executive Fellows Leadership Training,确定哈佛大学是该培训项目的唯一提供方，依据FAR 12.102(a)条款进行采购。此次采购将作为商业事项处理，遵循FAR第12部分的规定，NAICS代码为611310，项目执行地点位于马歇尔太空飞行中心。相关方须在2026年7月22日下午2:30中部标准时间前以书面形式提交资质能力材料，以供政府评估是否有必要进行竞争性采购，口头沟通不予接受。采购过程中适用NASA FAR补充条款1852.215-84关于监察员的规定，相关信息可查阅指定链接。采购专员Cody Guidry为主要联络人，邮箱为cody.d.guidry@nasa.gov，备选联络人为Shari Trigg。该通知发布于2026年7月17日，响应截止时间为2026年7月22日晚上7:30。

Colleges, Universities, and Professional Schools

POSTED

DEADLINE

Programmable Logic Controller Hardware UpgradeThis contract is for a brand-name procurement of Schneider Electric Programmable Logic Controller (PLC) automation hardware upgrades for the NASA Glenn Research Center, with delivery required at Cleveland, Ohio, 44135. The acquisition is strictly limited to new, non-refurbished equipment that exactly matches the make and model currently in use, and all hardware must be delivered in its original packaging. Only vendors certified through the Schneider Electric Alliance Industrial Automation Distributor (IAD) program are eligible to respond, and this certification is a mandatory pass/fail requirement for award consideration. The solicitation is structured as a Total Small Business Set-Aside under NAICS Code 334519, requiring all offerors to be registered in SAM.gov and to meet small business size standards. The contract is a Firm Fixed Price agreement with a total value yet to be determined, and award will be made on a lowest price technically acceptable basis, with technical acceptability tied directly to compliance with all specified equipment, certification, and delivery requirements. All proposed equipment is detailed across 34 line items including backplanes, power supplies, modules, terminal blocks, and adapters, with a 30-day period of performance after award. The contract requires full compliance with U.S. export control regulations, including ITAR and EAR, with the contractor responsible for securing any necessary export licenses and ensuring these requirements flow down to subcontractors. All shipments must be marked with “UNITED STATES GOVERNMENT” and the contracting agency name, include at least two copies of shipping documentation with the prime contract number, carrier identification, gross weight, and estimated value, and must adhere to FOB Destination terms. The contractor must also comply with clauses covering government property, sustainable products, accelerated payments to small business subcontractors, whistleblower rights, and the release of sensitive information. Quotes must be submitted via email to Lindsey McLellan at lindseey.m.mclellan@nasa.gov by July 16, 2026, at 4:00 p.m. CT, with all inquiries due by July 14, 2026, and must include two points of contact with name, phone, and email. Proposals must remain valid for 30 days, and failure to meet any pass/fail gate—certification status or technical acceptability—results in disqualification.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Pressure Sensing InstrumentThe contract titled "Pressure Sensing Instrument" is issued by the NASA Shared Services Center under the National Aeronautics and Space Administration with solicitation number 80NSSC26938029Q. It was posted on July 16, 2026, and responses are due by July 21, 2026, at 6:00 PM ET. The NAICS code 334419 indicates the procurement is for other electronic component manufacturing, specifically targeting advanced pressure sensing technology. The primary point of contact is Cara Craft, reachable via cara.s.craft@nasa.gov. The office is based at Stennis Space Center, Mississippi, with the performance location designated as Huntsville, Alabama, 35812. This is a special notice solicitation without a specific set-aside classification, open to eligible general contractors meeting technical and compliance requirements. All details must be reviewed through the provided SAM.gov link.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 10 hours