This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RIGGING SERVICES BUILDING 123

Awarded

W519TC-26-Q-B123Federal

Submission Closed06/17/2026, 05:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

DIBBS

FAN ASSEMBLY, TUBEAXIAL

Solicitation # SPE8E7-27-T-0311

Solicitation SPE8E7-27-T-0311 is a Small Business Set-Aside request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 27 tubeaxial fan assemblies, identified by NSN 4140-01-625-8232. The acquisition is managed under the First Destination Transportation program with a required delivery date of June 4, 2027, and a delivery window of 167 days after receipt of order. Delivery is specified as FOB Origin, with the consignee located at the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001), MIL-STD-2073-1E for preservation, and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination per FAR 52.246-1. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity and telecommunications restrictions. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and the award process may include a price evaluation preference for HUBZone concerns.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

G12-703311/Atlantic Supply

Solicitation # SRC0000037432

Solicitation SRC0000037432 is issued by the G12 Materials and Tests agency for the State of Alabama to obtain quotes for replacement parts for Campbell-Pacific Nuclear / Instrotek density gauges MC-3 and asphalt content gauge AC-series, as well as hourly repair labor. Parts are to be provided at ADS list price and ordered on an as-needed basis. The contract is governed by the Standard Terms and Conditions for Quick Quotes and the Department of Finance Administrative Code. The total contract value is capped at 25,000 dollars, with a maximum performance period of five years, subject to annual renewals by mutual written agreement. The State of Alabama will evaluate bids based on price reasonableness and cost realism, and may request proof of manufacturer reseller authorization, professional licenses, and insurance certificates. Vendors must be registered in Alabama Buys for electronic submission and must accept electronic payments, such as P-cards and EFT, at no additional cost. Compliance requirements include certification against debarment, adherence to the Beason-Hammon Alabama Taxpayer and Citizen Protection Act, and registration of foreign entities with the Alabama Secretary of State. The State maintains the right to inspect all products before acceptance in accordance with the Universal Commerce Code of Alabama.

G12 Materials and Tests

POSTED

DEADLINE

25-316173.FMD.BASMaintenance

Solicitation # 25-316173

The California Department of General Services, Facilities Management Division, is soliciting bids for Building Automation System (BAS) maintenance, repairs, and software updates at the Cal EPA building located at 1001 I Street, Sacramento, California. The scope of work includes technical support and equipment maintenance for Johnson Controls Metasys BAS and servers, VAV/VMA/Unitary controllers, Network Automation Engines, and Yaskawa Variable Frequency Drives. All services must comply with California Code of Regulations Title 24 Building Standards, DGS IT Infrastructure Standards, and applicable network requirements such as ISO 35.110 and IEEE 802.3. The contract requires a one-year warranty from the date of work acceptance, and the first annual or one-time services must be performed within 30 calendar days of agreement execution. Bidders must submit a comprehensive response package via email by December 1, 2026, including a signed solicitation document, cost worksheet, Bidder Declaration Form, Payee Data Record, and California Civil Rights Laws Certification. Evaluation is based on specification compliance and responsiveness, with a 5% preference granted to qualified Small Businesses or those with at least 25% California Certified Small Business participation. Insurance requirements are stringent, requiring primary coverage for Commercial General Liability, Automobile Liability, and Workers Compensation at $1,000,000 limits, as well as Professional Liability coverage of $1,000,000 per incident. Invoicing is conducted monthly in arrears through the DGS Invoice Payment Portal, and all labor must adhere to the DIR General Prevailing Wage Rate booklet.

California Department of General Services

POSTED

DEADLINE

BCL27 C2 - Peak Service Agreement - Chemistry

Solicitation # SRC0000037423

The Peak Scientific Generator Service Agreement, solicitation number SRC0000037423, is a procurement effort by the Alabama Clinical Laboratory Services for chemistry-related generator services. The contract allows for an initial term that may be renewed annually for up to five years, with a total not-to-exceed cost of 25,000 dollars. The State of Alabama maintains the right to inspect all products before acceptance in accordance with the Universal Commerce Code, and the sole venue for any litigation or dispute resolution is the City of Montgomery, Alabama, with money disputes handled by the Board of Adjustment of the State of Alabama. Suppliers must submit responses electronically through the Alabama Buys portal and may be required to provide proof of manufacturer reseller authorization, professional licenses, and certificates of insurance. Compliance requirements include adherence to the Beason-Hammon Alabama Taxpayer and Citizen Protection Act, enrollment in the E-Verify program, and certification of Alabama state and local tax remittance. Additionally, any award exceeding 25,000 dollars requires a Disclosure Statement to be filed within ten days. Payment is handled via electronic methods, including state-issued credit cards, P-cards, and EFT, and the State is exempt from paying sales tax under the Code of Alabama.

Clinical Laboratory Services

POSTED

DEADLINE

Actuator Integration and Technical Guidance SpecialistThis subcontract for an Actuator Integration and Technical Guidance Specialist involves providing field verification and technical training for prime contractors working on Jefferson Parish Government drainage projects. The selected specialist will conduct site visits to the Westwego 2 Pump Station to ensure proper system integration and deliver four hours of on-site technical guidance to Parish personnel covering installation, routine maintenance, and troubleshooting. To qualify for this engagement, the provider must utilize manufacturer-certified technical representatives. The project is categorized under NAICS code 811210 and is managed by the Jefferson Parish Government in Louisiana, with a response deadline set for December 1, 2026.

Jefferson Parish Government

POSTED

DEADLINE

OEM Service Engineer for Liebherr RL-S 2650-30 Litronic CraneThis subcontract involves a five-year comprehensive service and maintenance agreement for the Liebherr RL-S 2650-30 Litronic Crane on Northern Lighthouse Board marine projects. The selected provider will be responsible for executing maintenance according to a specific Schedule of Requirements, providing technical attendance during third-party load testing, and submitting all necessary risk assessments and method statements. The ultimate goal is to deliver a serviced crane that is ready for re-certification, supported by a signed-off service report. To ensure technical compliance and safety, the contract mandates the use of engineers who are both Class approved and certified by the Original Equipment Manufacturer, Liebherr. This long-term engagement supports prime contractors in maintaining critical marine infrastructure under the oversight of the Northern Lighthouse Board.

Northern Lighthouse Board

POSTED

DEADLINE

Biomedical Equipment Repair & Maintenance (Hamilton C6 Platform)

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Valve Assembly Repair and OverhaulThis subcontract involves the technical repair and restoration of a Valve Assembly (NIIN: 015505005) to support prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. The scope of work includes the disassembly, inspection, and refurbishment of internal components to ensure they meet original specifications. To guarantee functional compliance, the contractor must perform pressure testing and apply IUID data matrix marking in accordance with DFARS 252.211-7003. The final deliverable is one fully repaired and certified Valve Assembly with completed IUID registration. This project falls under NAICS code 811210 and is managed by the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Public Address (PA) System Maintenance and Repair Services

Defense Health Agency

POSTED

DEADLINE

Torque Assist Assembly Repair and ModificationThis subcontract, titled Torque Assist Assembly Repair and Modification, involves providing specialized technical services for the Department of Defense via Navsup Weapon Systems Support Mech. The scope of work focuses on the teardown, technical evaluation, and repair or modification of Torque Assist Assemblies (NIIN: 010884976) to support prime contractors on Department of the Navy projects. The selected provider will be responsible for disassembling units, assessing wear based on naval specifications, and utilizing precision machining and torque testing equipment to return assemblies to operational status. All work must adhere to Depot Level Repairable standards, concluding with the delivery of repaired, labeled, and packaged assemblies. This opportunity falls under NAICS code 811210, with a response deadline set for December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

On-site System Installation and User TrainingThis subcontract, managed by the NASA Shared Services Center for the National Aeronautics and Space Administration, involves the on-site installation and user training for the DSA100E system at the Langley Research Center in Hampton, Virginia. The selected provider will be responsible for the physical setup, unpacking, and installation of the system, ensuring all instrument checks meet KRUSS specifications to deliver a fully commissioned and calibrated system. A critical requirement for this engagement is that the provider must hold factory-trained KRUSS certification. In addition to the technical setup, the contractor is required to provide between four and eight hours of operational training for prime contractors to ensure personnel are proficient in using the equipment. The solicitation was posted on October 28, 2026, with a response deadline of October 30, 2026, under NAICS code 811210.

NASA Shared Services Center

POSTED

DEADLINE

Hydrostatic and Pneumatic Pressure Testing ServicesThis small business set-aside subcontract involves providing specialized hydrostatic and pneumatic pressure testing services for prime contractors supporting the NASA Shared Services Center. The scope of work requires the use of high-pressure rigs capable of exceeding 6000 PSI to conduct hydrostatic tests at 1.5 times the maximum allowable working pressure and pneumatic tests at 1.1 times the maximum allowable working pressure. Additionally, the contractor is responsible for performing non-destructive testing and inspections for nominal operating loads in strict accordance with ASME Boiler and Pressure Vessel Codes. All completed work must be documented through the delivery of certified test data and QC07 Evidence of Test reports.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

in 7 days

AI Contract Overview

This solicitation, W519TC26QB123, seeks rigging services at Building 123 at the Crane Army Ammunition Activity in Crane, Indiana, under a Firm Fixed Price Task Order issued in accordance with FAR Part 12 for commercial services. The procurement is restricted exclusively to eight pre-approved vendors who hold a Basic Ordering Agreement for Rigging, including Edritta Enterprises, Federon Technical, Nine3Six Solutions, Nomad Industrial Solutions, Parker Construction Enterprises, Seventh Genius, Sterileco, and Wild Companies. The requirement is limited to a 30-day performance period, with suggested dates of July 1 to July 31, 2026, and performance is FOB Destination at the specified location. The NAICS code is 811210 with a small business size standard of $34 million, and the Product Service Code is Z2JZ. Offerors must be registered in SAM and comply with all contract clauses including 52.204-7, 52.212-1, 52.212-4, and others addressing supply chain security, antiterrorism training, wage determinations, and prohibitions on contracting with inverted corporations or entities requiring confidentiality agreements. Submission of a completed Pricing Matrix from Attachment 0004 is mandatory, with all yellow-highlighted sections of Tab One fully populated and prices stated to two decimal places; failure to comply results in eligibility denial. Attendance at a mandatory site visit is required, with RSVPs due by May 28, 2026, at 12:30 PM CT—non-attendance automatically disqualifies an offeror. Proposals must be emailed to Bridget Garnica and Ryan Buhman with the exact subject line format, and all submissions are due no later than June 17, 2026, at 12:30 PM Central Time. The award will be made to the lowest-priced, responsible offeror who meets all mandatory requirements, with no discussions anticipated. The Government may employ AI tools to assist in proposal analysis for efficiency, but final evaluation and award decisions remain solely with government personnel. All work must comply with OSHA 1926.251, DoD, and CAAA safety standards, adhere to the wage determination No. 2015-4821 Revision 32, and include deliverables such as a

General Info

Request for rigging service proposals at Crane Army, firm-fixed-price, 30-day performance, SAM registration required.

Agency

Department Of Defense → W6QK Acc-Ri

Contract Value

$31,200

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Crane, IN, USA

Set-Aside

NONE

Awardee

WILD COMPANIES, INC

Award Issued Date

08/10/2026, 12:00:00 AM UTC

Documents

Attachment 0005 - Provisions and Clauses

contract-document

High

Task Order Performance Work Statement Rigging B123 20MAY2026

sow

High

Wage Determination No. 2015-4821 Revision 32 Indiana

wage-determination

High

Attachment 0004 Price Matrix 18MAY2026

other

Low

B123 Equipment List Attachment

equipment-list

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseAwarded

PostedMay 21

Combined Synopsis

Notice updatedJun 11

Response deadline changed from Jun 12, 2026 to Jun 17, 2026. The notice description changed.

AwardedAug 10

Contract was awarded

Submission Closed

06/17/2026, 05:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Ri

Contacts1 person available

OfficeROCK ISLAND, IL, 61299-0000, USA

Organization / AgencyDepartment Of Defense → W6QK Acc-Ri

Office AddressROCK ISLAND, IL, 61299-0000, USA

Contacts

Bridget Garnica

contact@example.gov

Full Description

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in RFO FAR Subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested, and a formal solicitation will NOT be issued.

This is a Request for Proposal (RFP) using RFO FAR Part 12, Acquisition of Commercial Products and Commercial Services; the Solicitation Number is W519TC26QB123 for the Rigging Services at Building 123.

The NAICS code for this procurement is 811210 (Electronic & Precision Equipment Repair & Maintenance). The small business size standard for this NAICS is $34,000,000. The Product Service Code is Z2JZ (Repair or Alteration of Miscellaneous Buildings).

Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/.

ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL

DESCRIPTION OF REQUIREMENT

This requirement is not to exceed a period of performance of 30 days. The CLIN structure can be found below:

CLIN 0001: Rigging Services at Building 123

Quantity: 1 Lot

CLIN 0001 shall be in accordance with Attachment 0001 – Performance Work Statement and Attachment 0002 – B123 Equipment List.

TYPE OF ACQUISITION AND CONTRACT

This acquisition is restricted to the eight (8) vendors who received a Basic Ordering Agreement for Rigging. Award will be made using Low Price, resulting in a single award Firm Fixed Price Task Order.

PLACE OF PERFORMANCE

Performance will be FOB Destination at the following:

Crane Army Ammunition Activity

Building 123

300 Highway 361

Crane, IN 47522-5001

PROPOSAL SUBMISSION REQUIREMENTS

Offerors SHALL submit the following in response to this solicitation:

Price: Offerors must submit Completed Pricing Matrix at Attachment 0003. All yellow-highlighted sections of tab one (1) shall be completed. Prices shall be stated in 2 decimal places. Failure to comply with any pricing instruction included in this solicitation may render the proposal ineligible for award.

The price proposed will be evaluated to determine reasonableness. In accordance with FAR 31.201-3, a price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business.

SITE VISIT

It is MANDATORY that any interested bidder attend a site visit. Any bidders that do not attend this site visit will not be able to bid on this requirement and will automatically be considered ineligible for receipt of award.

Please provide a response via email if you will be attending the site visit no later than 12:30 CT, 28 May 2026. There will be no extensions to this date. Any statement of interest in the visit after 28 May 2026 will not be accepted.

Further instructions on the time and location will be provided via email to those interested bidders.

USE OF ARTIFICIAL INTELLIGENCE (AI) TOOLS IN PROPOSAL EVALUATION

Use of Al tools in Support of Evaluations: The Government may employ Al as a tool to assist in the analysis and review of offeror proposals. Al tools may be used to support tasks such as summarizing proposal content, identifying compliance with request for task order proposal/ solicitation requirements, and highlighting areas of potential strength, weakness, or risk.

Maintaining Inherently Governmental Functions: Notwithstanding the use of Al tools to support the evaluation process, all final evaluation judgements, including the assignment or assessment of adjectival ratings, best value determinations, and source selection decisions, will be made exclusively by duly appointed Government personnel. The Government retains sole responsibility
for all inherently governmental functions and will not delegate decision making authority to any Al tool.

Offeror Confidentiality and Data Protection: The Al tools utilized by the Government will be employed in a manner consistent with applicable regulations that govern the protection of proprietary and source selection sensitive information. The Al tool will be an output-only system. Any generated report data is not saved. No proposal data will be transmitted to or processed by
external, non-Government systems without appropriate safeguards and authorizations in place.

BASIS FOR AWARD

Award will be given to the offeror who provides the Lowest Price and is deemed responsible and is compliant with all the requirements of this solicitation.

In accordance with RFO FAR 52.212-1(d), the Government intends to award a contract against this solicitation without discussion.

LISTING OF ATTACHMENTS

Attachment 0001 – Performance Work Statement Rigging B123; 20 May 2026

Attachment 0002 – Bldg 123 Equipment List

Attachment 0003 - Wage Determination No.: 2015 -4821 Revision 32; 13 May 2026

Attachment 0004 – Price Matrix; 18MAY2026

Attachment 0005 – Provisions and Clauses

DEADLINE FOR SUBMISSION

Offers are due on 17 June 2026 no later than 12:30 PM Central Time.

Offers shall be submitted in the following way:

Electronically via email to the Contract Specialist, Bridget Garnica, contact@example.gov and Contracting Officer, Ryan Buhman, contact@example.gov. Offerors shall include “W519TC26QB123 Response – [Insert Offeror’s Name]” within the Subject line.

QUESTIONS

Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above.

**Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received 72 hours prior to the closure of the solicitation may not be considered.

End of Addendum 52.212-1

---------------------------------------------------------------------------------------------------------------------------------

AMENDMENT 0001

Amendment 0001 to solicitation W519TC26QB123 has been executed as of 21 May 2026. Amendment 0001 is to revise the "TYPE OF ACQUISITION AND CONTRACT" to the following:

This acquisition is restricted to the following eight (8) vendors who received a Basic Ordering Agreement for Rigging.

1- Edritta Enterprises

2 - Federon Technical

3 - Nine3Six Solutions

4 - Nomad Industrial Solutions

5 - Parker Contruction Enterprises

6 - Seventh Genius

7 - Sterileco

8 - Wild Companies

Award will be made using Low Price, resulting in a single award Firm Fixed Price Task Order.

The closing date for this solicitation remains the same. Quotes shall be recieved no later than 12:30 PM Central Time, 12 June 2026.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

AMENDMENT 0002

Amendment 0002 to solicitation W519TC26QB123 has been executed as of 11 June 2026. Amendment 0002 is to revise the closing date for this solicitation to the following: 17 June 2026 at 12:30 PM Central Time.