This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RIGGING SERVICES BUILDINGS 136 & 2250

Closed

W519TC-26-Q-136Federal

Submission Closed06/17/2026, 05:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

DIBBS

REPAIR KIT, BEACON LThe contract involves the procurement of 51 units of a Repair Kit for Beacon L, identified by the NSN/Part Number 6210-01-437-4307. This solicitation is issued by the Defense Logistics Agency, part of the Department of Defense, under the solicitation number SPE4A6-26-T-94Q5. The contract was posted on June 16, 2026, with a response deadline set for June 24, 2026. The solicitation type is categorized simply as a solicitation without any specified set-aside type or NAICS code, indicating an open opportunity likely accessible to various eligible contractors. Performance location details and points of contact are not disclosed, but the contract is managed under federal organization guidelines. The contract reflects the Department of Defense's ongoing need for maintenance and repair components, emphasizing the importance of timely submission in a competitive procurement process through the DLA's bidding system. The linked solicitation page provides access for interested parties to review additional details and submit offers.

Defense Logistics Agency

POSTED

DEADLINE

CALIBRATION/ AEROSOL PHOTOMETERThe Norfolk Naval Shipyard in Portsmouth, VA, has issued a sources sought announcement seeking information and planning input for a fixed-price contract to provide maintenance and calibration services as outlined in the attached Statement of Work. This notice is not a solicitation for proposals, and no contract will be awarded based solely on responses to this announcement. The intended procurement will follow simplified acquisition procedures under FAR Part 13, with a focus on firm fixed-price terms. This requirement is sole-sourced to Air Techniques International, and no other bids will be accepted. The relevant NAICS code for this procurement is 811210, with a size standard of 34 million. Interested and capable vendors may express their interest by the specified deadline, self-certifying they are not suspended or debarred from federal contracts. Additionally, any prospective awardee must be registered in the System for Award Management (SAM) database at the time of award, throughout contract performance, and until final payment. The place of performance is in Owings Mills, Maryland, and the points of contact for this sources sought are representatives from the Norfolk Naval Shipyard. This announcement emphasizes that the government does not commit to any contract award and will not pay for information submitted.

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

AN/AP-68V9 Radar DMSMS Study - Phase II ResolutionThe Department of Defense, through the F-16 System Program Office at Hill Air Force Base, is conducting market research via a sources sought synopsis to identify capable small business sources for Phase II of the AN/APG-68(V)9 Radar Diminishing Manufacturing Sources and Material Shortages (DMSMS) program. This phase focuses on resolving obsolescence issues identified in a prior study on critical Shop Replaceable Units (SRUs) within the radar's Modular Receiver/Exciter and Common Radar Processor assemblies. The objective is to replace obsolete components while maintaining form, fit, and function compatibility to ensure future manufacturability and reparability. The effort will proceed as a task order under an existing post-production sustainment contract with Northrop Grumman Corporation, the original equipment manufacturer holding proprietary technical data needed for this work. Interested vendors, particularly small businesses including 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned categories, are invited to respond with their capability statements, experience with DMSMS efforts, understanding of related cybersecurity requirements, relationships with Northrop Grumman or Lockheed Martin, and potential teaming arrangements. Key requirements include project management, engineering redesign, prototype fabrication of two engineering development units for each of nine SRUs, and functional testing with qualification plans. Deliverables encompass prototype hardware retained at the contractor site, several engineered data documents, and a proposal to support the subsequent production phase. Responses are voluntary and intended solely for acquisition planning, with submissions due by the end of June 2026.

POSTED

DEADLINE

70--INTERFACE UNIT,DATA, IN REPAIR/MODIFICATION OFThis procurement involves the acquisition of 13 units of a specific interface data unit classified under NSN 0R-7025-017061785-H1, with delivery terms FOB origin. The current design of the part is unstable and fails to meet required engineering and performance objectives, leading to anticipated major design changes that will obsolete the current configuration. Because the part is flight critical and the technical data is insufficient for open competition, the government requires source approval prior to contract award. Only previously approved sources have been solicited, and any potential offerors who are not approved must submit detailed technical data as outlined in NAVSUP WSS Source Approval Information Brochures to be considered. Approval processes are time-sensitive, and lack of timely approval may result in awards continuing with existing suppliers to meet urgent fleet needs. This contract action is planned under limited competition authority, specifically FAR 6.302-1, with the government inviting responsible parties to express interest or submit proposals within 45 days, or 30 days if issued under an existing Basic Ordering Agreement. The solicitation excludes acquisition under FAR Part 12 for commercial items but recognizes the applicability of Free Trade Agreements and related trade compliance clauses. Award depends on meeting all qualification requirements at the time of award. The contracting office is NAVSUP Weapon Systems Support based in Philadelphia, PA, with point of contact provided for further information. Military specification documents and related standards are accessible through designated government online portals and support offices for bidders’ reference.

Navsup Weapon Systems Support

POSTED

DEADLINE

UPSSERVICEThe contract involves providing preventative maintenance services for the Uninterruptible Power Supply (UPS) systems at Tobyhanna Army Depot in Pennsylvania. A Pre-Solicitation meeting is scheduled via Microsoft Teams on June 22 at 1:00 PM EST to discuss the details, with the meeting link, ID, and passcode provided. The meeting offers options for both online and phone participation. Interested contractors are encouraged to review the attached Draft Performance Work Statement and Draft Pre-Solicitation documents to prepare their responses. This opportunity, identified under the solicitation number W51AA1UPSSERVICE, was posted by the Department of Defense on June 16, 2026, with a response deadline of June 22, 2026, at 8:00 PM EST. The contract is managed by the W6QK Acc-Apg Cont Ct Tyad Office, with Jason Burke as the primary point of contact. Services will be performed at the Tobyhanna Army Depot facility, and further information can be accessed through the SAM.gov portal provided in the contract data.

W6QK Acc-Apg Cont Ct Tyad Ofc

POSTED

2 days ago

DEADLINE

in 13 days

AI Contract Overview

This solicitation, numbered W519TC-26-Q-136, issued by the Department of Defense for the Crane Army Ammunition Activity in Indiana, requests proposals for rigging services at Buildings 136 and 2520. Classified under NAICS code 811210 (Electronic & Precision Equipment Repair & Maintenance) with a Product Service Code Z2JZ (Repair or Alteration of Miscellaneous Buildings), this procurement is set as a firm fixed price task order with a performance period not to exceed 30 days. The award will be made to a single offeror based on the lowest price who is responsible and fully compliant with the solicitation requirements. Only eight pre-qualified vendors holding a Basic Ordering Agreement for rigging services are eligible to submit proposals. Submission requires completion of a detailed pricing matrix, with prices stated to two decimal places, and mandatory registration in the System for Award Management (SAM) at the time of response. A critical requirement of the solicitation is mandatory attendance at a site visit by interested bidders, with non-attendance resulting in automatic disqualification. Proposals must be submitted electronically by June 17, 2026, to the designated contracting personnel. The government reserves the right to utilize AI tools to assist in proposal evaluations, though all final decisions will remain under human government authority. Contract performance will be FOB destination at the specified Crane facilities. The contract includes compliance with federal labor laws, wage determinations, Buy American Act sourcing requirements, anti-trafficking, cybersecurity mandates consistent with DoD regulations, and anti-terrorism awareness training. Inspection and acceptance protocols adhere to FAR requirements for fixed-price service contracts, and invoicing must be processed through the Wide Area WorkFlow (WAWF) system. The solicitation explicitly states award without discussions, emphasizing the importance of complete and compliant initial submissions.

General Info

DoD requests lowest-price rigging services for Crane Army buildings, 30-day fixed-price contract.

Agency

Department Of Defense → W6QK Acc-Ri

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance View NAICS

Place of Performance

Crane, IN, USA

Set-Aside

NONE

Documents

(5)

Rigging Services Task Order Performance Work Statement B136 20MAY2026

PDF•sow

Attachment 0004 - Price Matrix 20MAY2026

XLSX•other

B136 and 2520 Equipment List

PDF•equipment-list

Attachment 0005 - Provisions and Clauses

PDF•contract-document

Wage Determination No. 2015-4821 Revision 32 Indiana

PDF•wage-determination

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 26

Combined Synopsis

Response DeadlineJun 17

Deadline has passed

Submission Closed

06/17/2026, 05:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Ri

Contacts1 person available

OfficeROCK ISLAND, IL, 61299-0000, USA

Organization / Agency

Department Of Defense → W6QK Acc-Ri

Office AddressROCK ISLAND, IL, 61299-0000, USA

Contacts

Bridget Garnica

contact@example.gov

Full Description

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in RFO FAR Subpart 12.201, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested, and a formal solicitation will NOT be issued.

This is a Request for Proposal (RFP) using RFO FAR Part 12, Acquisition of Commercial Products and Commercial Services; the Solicitation Number is W519TC26QB136 for the Rigging Services at Building 136 and 2520.

The NAICS code for this procurement is 811210 (Electronic & Precision Equipment Repair & Maintenance). The small business size standard for this NAICS is $34,000,000. The Product Service Code is Z2JZ (Repair or Alteration of Miscellaneous Buildings).

Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/.

ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL

DESCRIPTION OF REQUIREMENT

This requirement is not to exceed a period of performance of 30 days. The CLIN structure can be found below:

CLIN 0001: Rigging Services at Building 136 & 2520

Quantity: 1 Lot

CLIN 0001 shall be in accordance with Attachment 0001 – Performance Work Statement and Attachment 0002 – B136 & 2520 Equipment List.

TYPE OF ACQUISITION AND CONTRACT

This acquisition is restricted to the following eight (8) vendors who received a Basic Ordering Agreement for Rigging:

1- Edritta Enterprises

2 - Federon Technical

3 - Nine3Six Solutions

4 - Nomad Industrial Solutions

5 - Parker Construction Enterprises

6 - Seventh Genius

7 - Sterileco

8 - Wild Companies

Award will be made using Low Price, resulting in a single award Firm Fixed Price Task Order.

PLACE OF PERFORMANCE

Performance will be FOB Destination at the following:

Crane Army Ammunition Activity

Building 136 & 2520

300 Highway 361

Crane, IN 47522-5001

PROPOSAL SUBMISSION REQUIREMENTS

Offerors SHALL submit the following in response to this solicitation:

Price: Offerors must submit Completed Pricing Matrix at Attachment 0003. All yellow-highlighted sections of tab one (1) shall be completed. Prices shall be stated in 2 decimal places. Failure to comply with any pricing instruction included in this solicitation may render the proposal ineligible for award.

The price proposed will be evaluated to determine reasonableness. In accordance with FAR 31.201-3, a price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business.

SITE VISIT

It is MANDATORY that any interested bidder attend a site visit. Any bidders that do not attend this site visit will not be able to bid on this requirement and will automatically be considered ineligible for receipt of award.

Please provide a response via email if you will be attending the site visit no later than 12:30 CT, 28 May 2026. There will be no extensions to this date. Any statement of interest in the visit after 28 May 2026 will not be accepted.

Further instructions on the time and location will be provided via email to those interested bidders.

USE OF ARTIFICIAL INTELLIGENCE (AI) TOOLS IN PROPOSAL EVALUATION

Use of Al tools in Support of Evaluations: The Government may employ Al as a tool to assist in
the analysis and review of offeror proposals. Al tools may be used to support tasks such as
summarizing proposal content, identifying compliance with request for task order proposal/
solicitation requirements, and highlighting areas of potential strength, weakness, or risk.

Maintaining Inherently Governmental Functions: Notwithstanding the use of Al tools to support
the evaluation process, all final evaluation judgements, including the assignment or assessment of
adjectival ratings, best value determinations, and source selection decisions, will be made
exclusively by duly appointed Government personnel. The Government retains sole responsibility
for all inherently governmental functions and will not delegate decision making authority to any Al
tool.

Offeror Confidentiality and Data Protection: The Al tools utilized by the Government will be
employed in a manner consistent with applicable regulations that govern the protection of
proprietary and source selection sensitive information. The Al tool will be an output-only system.
Any generated report data is not saved. No proposal data will be transmitted to or processed by
external, non-Government systems without appropriate safeguards and authorizations in place.

BASIS FOR AWARD

Award will be given to the offeror who provides the Lowest Price and is deemed responsible and is compliant with all the requirements of this solicitation.

In accordance with RFO FAR 52.212-1(d), the Government intends to award a contract against this solicitation without discussion.

LISTING OF ATTACHMENTS

Attachment 0001 – Performance Work Statement Rigging B136; 20 May 2026

Attachment 0002 – Bldg 136 & 2520 Equipment List

Attachment 0003 - Wage Determination No.: 2015 - 4821 Revision 32; 13 May 2026

Attachment 0004 – Price Matrix; 20MAY2026

Attachment 0005 – Provisions and Clauses

DEADLINE FOR SUBMISSION

Offers are due on 17 June 2026 no later than 12:30 PM Central Time.

Offers shall be submitted in the following way:

Electronically via email to the Contract Specialist, Bridget Garnica, bridget.m.garnica.civ@army.mil and Contracting Officer, Darla Lott, darla.a.lott.civ@army.mil. Offerors shall include “W519TC26QB136 Response – [Insert Offeror’s Name]” within the Subject line.

QUESTIONS

Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above.

**Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received 72 hours prior to the closure of the solicitation may not be considered.

End of Addendum 52.212-1