Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

RING, GATE FUEL VALV

Closed
SPE4A7-26-T-585TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412
New
DIBBS
ELECTRONIC MODULE, S
Solicitation # SPE7M5-26-T-340C
This contract specifies the procurement of one electronic module, part number IC693MDL940 with NSN 5963-01-466-1976, under solicitation SPE7M5-26-T-340C, with a requirement for delivery within five days to a designated FOB destination. The item is classified as ESD sensitive and must be packaged in compliance with stringent military standards including MIL-STD-2073-1E and MIL-STD-129 for marking and handling. ESD and EMI protection is mandatory, requiring the use of qualified barrier materials as per MIL-PRF-81705 Type I and Type III specifications, sourced exclusively from manufacturers listed on the QPL-81705. The supplier is responsible for ensuring all packaging materials meet these requirements and for providing technical documentation if the solicitation does not explicitly call for ESD/EMI protective measures. The item must be properly cushioned to prevent physical damage to leads and terminals, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. All packaging and marking must adhere to DLA regulations, including the use of special marking code 39 indicating ESD sensitivity, and the entire shipment must follow DLA logistics procedures for transportation and delivery. The delivery address is the U.S. Navy/AMC Air Terminal in Bahrain, with a secondary parcel post address in FPO AE 09838. The contract references DLA’s Master List of Technical and Quality Requirements, and the version in effect on the solicitation issue date governs compliance. The supplier must verify all protective packaging materials are qualified and properly documented. The original required delivery date is March 3, 2023, with the contract solicitation posted in 2026, indicating a future contracting window. Contact for inquiries is Margaret Smith of the Department of Defense’s Active Devices Division, and compliance with all DLA packaging and handling protocols is non-negotiable for acceptance.
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

The contract pertains to the procurement of four units of a ring, gate, fuel valve with NSN 2915-00-510-8301, issued under solicitation SPE4A7-26-T-585T by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required at Tinker AFB, Oklahoma, with a delivery timeline of 171 days after award, culminating in a required delivery date of July 6, 2027, and an earliest need ship date of January 17, 2027. The contract is FOB origin, with inspection and acceptance occurring at the destination, and the unit of issue is each. Packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, and all items must be marked and labeled per MIL-STD-129, including barcoding per GS1-128 and PDF417 standards. Palletization must adhere to RP001, DLA Packaging Requirements for Procurement, and the unit of issue and quantity per unit pack must match contract specifications exactly. Quality assurance mandates sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances permitted unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively. Technical and quality requirements referenced by R or I numbers from the DLA Master List take precedence over all other standards. Cybersecurity compliance is enforced through CMMC Level 2 self-assessment and mandatory adherence to NIST SP 800-171, with requirements for safeguarding covered defense information and reporting cyber incidents under FAR 52.204-7012 and 252.240-7997. The contractor must maintain a valid UEI and CAGE code, and all subcontracting activity must comply with applicable clauses including 52.244-6 and 252.244-7999. Transportation of supplies must be via U.S.-flag vessels unless waived, and the use of hazardous materials is restricted with requirements for Safety Data Sheets and compliance with prohibitions on hexavalent chromium and toxic substance

General Info

Four RING, GATE FUEL VALVES at $4.00 each, delivered to Tinker AFB by Jan 17, 2027, with strict quality and CMMC Level 2 compliance.

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A7-26-T-585T DLA Aviation Jul 22 2026

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Deadline changed

Response deadline changed from Jul 29, 2026 to Aug 4, 2026.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA

Full Description

Show more
RING,GATE FUEL VALV
RING, GATE, FUEL VALVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
WHITTAKER CORP
SEE HERS/AMPL FOR CAGE & P/N
DSCR DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT.
.
SAMPLING:
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
MEGGITT NORTH HOLLYWOOD INC 79318 P/N 111389
SPE4A7-26-T-585T
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017572050 0001 EA 4.000
NSN/MATERIAL:2915005108301
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/17/2027 Original Required Delivery Date:07/06/2027
SPE4A7-26-T-585T
SECTION B
PR: 7017572050 PRLI: 0001 CONT’D
SPE4A7-26-T-585T NSN/Part Number: 2915-00-510-8301 Quantity: 4 EA Purchase Request: 7017572050QTY: 4 Delivery: 171 days ADO

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
HEAD, FLUID FILTER
Solicitation # SPE4A7-26-T-805Q
Solicitation SPE4A7-26-T-805Q is a Request for Quotations issued by the Defense Logistics Agency Aviation for the procurement of 37 fluid filter heads, identified by NSN 1650-00-756-4991. A critical requirement for this acquisition is that the parts must be sold under part number AC1768-61D1 or AC176861D1. Per Tinker AFB requirements, the regular part number must appear on both the physical part and the packaging, regardless of whether the manufacturer includes an S prefix. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with a need ship date of March 17, 2027, and an original required delivery date of September 30, 2027. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. All packaging and labeling must comply with MIL-STD-129. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Quotes must be submitted via the DIBBS portal, and offerors must comply with the Buy American Act and Berry Amendment restrictions.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHOULDER
Solicitation # SPE4A7-26-T-724X
Solicitation SPE4A7-26-T-724X is a federal procurement issued by the Defense Logistics Agency (DLA) for the supply of four shoulder bolts, identified by NSN 5306-01-454-8637. The requirement is managed by the ASC Supplier Oper AE and AF Division, with Naron Sanderlin serving as the primary point of contact. Delivery is scheduled for March 8, 2027, with a final required delivery date of November 29, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is issued under the First Destination Transportation (FDT) program, and offers must be submitted as FOB Origin. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific prohibitions are in place against the use of mercury or mercury-containing compounds in preservation and packaging. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards for safeguarding covered defense information. Offerors must be registered in the System for Award Management (SAM) and submit quotes through the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS