Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RING, PISTON

Active
SPE4A7-26-T-439QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract covers the procurement of 10 piston rings with NSN 2810-01-734-9204 under solicitation SPE4A7-26-T-439Q, issued by the Department of Defense through DLA. Delivery is required within 116 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and must be marked and packaged per MIL-STD-129 with palletization following RP001 guidelines. Inspection and acceptance occur at origin, with sampling conducted under MIL-STD-1916 or ASQ H1331 using zero-defect acceptance unless otherwise specified, and critical attributes are verified at level VII with an AQL of 0.1. Measuring and test equipment must meet RT001 standards, and government identification must be removed from non-accepted items per RQ011. The contract enforces physical identification of bare items per RQ017 and applies covered defense information protocols under RD003. The unit of issue is each, and the supplier, MID-AMERICA AEROTECH, LLC, must deliver by the original required date of April 12, 2027, despite the need ship date of October 4, 2026. Contact for inquiries is Channon Dillard.

General Info

Procure 10 piston rings NSN 2810-01-734-9204 by April 12, 2027, to New Cumberland, PA, per MIL-STD-129 and DLA quality standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-439Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
CHANNON DILLARD
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,PISTON
RING,PISTON
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RT001: MEASURING AND TEST EQUIPMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MID-AMERICA AEROTECH, LLC 0UES3 P/N 29334
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-439Q
SECTION B
PR: 7016227783 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016227783 0001 EA 10.000
NSN/MATERIAL:2810017349204
DELIVERY (IN DAYS):0116
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/04/2026 Original Required Delivery Date:04/12/2027
SPE4A7-26-T-439Q NSN/Part Number: 2810-01-734-9204 Quantity: 10 EA Purchase Request: 7016227783QTY: 10 Delivery: 116 days ADO

Similar Contracts

NAICS: 333618
New
DIBBS
MOTOR, ALTERNATING CThe contract issued under solicitation SPE7M1-26-T-208K specifies the procurement of two alternating current motors, identified by NSN 6105016724051 and part numbers 603511-253 and 801631-593, with a total quantity of two units. Delivery is required within 24 days of award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination warehouse located at 25600 S Chrisman Road, Tracy CA 95304-5000. The contract enforces strict packaging compliance with MIL-STD-2073-1E and marking in accordance with MIL-STD-129, with no special marking requirements, and palletization must adhere to DLA packaging standards. The unit of issue is each, priced at $0.00 per unit, with zero tolerance for quantity variance. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The original required delivery date is January 10, 2027, but the needed ship date is August 18, 2026, and transportation logistics must follow DLA Procurement Notes C19 and C20. The contract is managed by the Department of Defense’s Maritime Supply Chain, with primary point of contact Tara Halter, and falls under NAICS code 333618.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
HOUSING, COOLANT PUMThe contract pertains to the procurement of a coolant pump housing for engine applications, identified by NSN 2930-01-662-2144 and part number 81093-1P, with a required quantity of one unit. Delivery is mandated within five days of award under FOB origin terms, with no tolerance for variance in quantity. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede any referenced standards including ASTM D3951. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by specification. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, with palletization following specified guidelines; unit packaging must meet the designated QUP and be compliant with DLA standards. The item is to be delivered to the distribution management office in Albany, Georgia, utilizing traceable freight methods—parcel post is explicitly prohibited. The solicitation number is SPE7L1-26-T-828Y, with a required delivery date of July 10, 2026, and the contract is managed under the Department of Defense's Land Supply Chain. Government use codes and tracking identifiers are embedded for internal logistics and accountability.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
MOTOR, UNIVERSALThe contract pertains to the supply of a Universal Motor identified by NSN 6105016990176 and part number 941766 from Parker Hannifin Corporation, with a quantity of five units required. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on procurement scale. Mercury and mercury-containing compounds are strictly prohibited in or contacting the hardware unless explicitly exempted for functional uses such as batteries, fluorescent lamps, sensors, control systems, weapon systems, or specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier conforming to NAVSEA 5100-003D. The item is designated as a critical application item, requiring strict adherence to packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking applicable. Packaging must comply with DLA’s packaging requirements and palletization standards. Delivery is FOB origin and must occur within 164 days of contract award, with the original required delivery date set for November 1, 2026, and the needed ship date specified as January 5, 2027. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions reference DLAD procedural notes C19 and C20. The contract, identified as SPE7M1-26-T-208A, was posted on July 13, 2026, with responses due by July 24, 2026, under the NAICS code 333618, and is managed by the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
BRACKET, ENGINE MOUNThe contract pertains to the procurement of one engine mount bracket with NSN 2510-01-572-9690 and part number 4341118 from JLG Industries, Inc., under solicitation SPE7L0-26-T-0369. The item must be delivered within five days to the designated government receipt point in Texarkana, Texas, under FOB origin terms with no tolerance for quantity variance. All supplies must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods using material code 49 to prevent corrosion on bare metal surfaces, and must be marked in accordance with MIL-STD-129 with no special marking required. Packaging must adhere to DLA’s standardized requirements, including the use of designated unit containers, intermediate packaging, and palletization protocols. Delivery must be made via the fastest traceable shipping method, explicitly excluding parcel post, and the shipment must be addressed to the designated DLA logistics center with the provided government tracking identifiers. The required delivery date is July 10, 2026, and the contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs compliance for both simplified and large acquisitions based on solicitation and amendment dates. Final acceptance occurs at the destination point after inspection, and all documentation and marking must align with government specifications for traceability and accountability.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
VALVE, POPPET, ENGINEThe contract is for the procurement of 823 engine intake poppet valves identified by NSN 2815-00-150-7406 under solicitation SPE7L5-26-T-4450, issued as a total small business set-aside with a NAICS code of 333618. Delivery is required within 205 days of award, and all items must conform strictly to the source-controlled drawing referenced in the solicitation; only approved sources listed on the drawing are currently authorized, though additional qualified suppliers may be recognized through formal qualification with the cognizant design activity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contractor must comply with DLA packaging standards and the prohibition of ozone-depleting chemicals, with any substitutions requiring prior approval. Cybersecurity compliance requires CMMC Level 2 certification for third-party assessment organizations, and all technical data associated with the item is subject to export control under ITAR or EAR, restricting access to only those contractors certified under the US/Canada Joint Certification Program, trained in DOD export control procedures, and approved by DLA. Final inspection and acceptance must occur at the manufacturer’s facility and require technical verification, not merely count or condition inspections; the contractor must provide all necessary drawings and technical documentation to prove compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute classifications must adhere to specified verification levels or AQLs. Computer numerically controlled equipment of equal or greater precision may replace Army-designed inspection fixtures. Export-controlled technical data cannot be disclosed to foreign persons without authorization, and DFARS 252.225-7048 applies. All supplies must be stripped of government identification if rejected. The point of contact for the solicitation is Mary Rowley of the Department of Defense, with responses due by July 24, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details