Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RING, RETAINING

Active
SPE4A6-26-T-05UWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a retaining ring with part number 001-0387 and NSN 5325-00-255-6590, manufactured by Marathon Le Tourneau Co, with a total quantity of eight units to be delivered FOB origin within 171 days. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Mercury and mercury-containing compounds are strictly prohibited in all hardware, preservation, packaging, and marking processes except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified reagents; any portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, with marking adhering to MIL-STD-129 and no special marking required. The item is designated as a critical application item, and delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with full inspection and acceptance occurring at destination. The contract prohibits any quantity variance and requires strict compliance with all DLA procedures, including transportation guidelines and unit of issue standards.

General Info

Eight retaining rings, part 001-0387, FOB origin, due in 171 days, zero defects, mercury prohibited, critical application, delivered to New Cumberland.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05UW for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Jeremy Stokes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,RETAINING
RING, RETAINING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MARATHON LE TOURNEAU CO (95685)
LONGVIEW, TEX.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
MARATHON LE TOURNEAU CO 95685 P/N 001-0387
SPE4A6-26-T-05UW
SECTION B
PR: 7017487324 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017487324 0001 EA 8.000
NSN/MATERIAL:5325002556590
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-05UW
SECTION B
PR: 7017487324 PRLI: 0001 CONT’D
Need Ship Date:01/10/2027 Original Required Delivery Date:11/26/2026
SPE4A6-26-T-05UW NSN/Part Number: 5325-00-255-6590 Quantity: 8 EA Purchase Request: 7017487324QTY: 8 Delivery: 171 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
PLUNGER, DETENTThe contract pertains to the procurement of 12 units of a PLUNGER, DETENT with NSN/Part Number 5340-01-487-6789, with a delivery requirement of 140 days after order. The solicitation, identified as SPE7L1-26-R-0107, was posted on July 15, 2026, and responses are due by August 14, 2026, under the Department of Defense’s Land Supply Chain. The item is subject to cybersecurity compliance under the Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring the vendor to be a certified third-party assessment organization. Technical and quality requirements referenced by R or I numbers must adhere to the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is controlled under ITAR or EAR, restricting exportation—including disclosure to foreign nationals—without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to export-controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and validation through the DLA questionnaire.
LAND SUPPLY CHAIN

POSTED

in about 9 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract pertains to the procurement of 988 individual blind rivets, identified by NSN 5320-01-150-2755 and part number NAS9308M-6-09, manufactured in compliance with revision 5 of the non-government standard NAS9308 dated 08/31/2015, and packaged according to MIL-STD-2073-1E with specific packaging codes and methods. The item is classified as a commercial item of a type, and hardware manufactured to any prior revision of the standard that was current at the time of production remains acceptable, though all units supplied after the solicitation date must conform to the current revision. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are deemed critical, major, or minor with corresponding verification levels and AQLs. Physical identification and marking must adhere to MIL-STD-129, with no special marking required, and packaging must meet DLA’s overall procurement requirements including palletization and unit containment. Delivery is FOB origin with zero tolerance for quantity variance, and acceptance occurs at the point of origin. The required delivery date is 169 days from award, with an original due date of January 19, 2027 and a need ship date of November 29, 2026. The contract references multiple DLA quality and inspection requirements including RQ001, RQ009, RQ011, RQ017, and RP001, all tied to the DLA Master List of Technical and Quality Requirements. Transportation and shipping instructions follow DLAD procedural notes C19 and C20, and the goods must be delivered to the designated receiving warehouse at 25600 S Chrismann Road, Tracy, CA 95304-5000. The sole point of contact for the contract is Ahoefa Simons De Fanti, and the solicitation was issued on July 14, 2026 with a response deadline of July 17, 2026 under solicitation number SPE4A6-26-T-80W7, classified under NAICS code 332510.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of straight-headed pins designated as MS20392-2C51, manufactured to the current revision of the non-government standard NASM20392 and referenced in NASM5673, with material requirements replacing MIL-S-6050 with SAE AMS6280 for 8630 steels. The item is classified as a critical application and must comply with MIL-STD-130 for part marking using SAE AS478 procedures, with no unique item identification required per the service customer’s direction. All hardware must meet the latest applicable version of the governing standard, with prior revisions accepted only if they were current at the time of manufacture. Inspection and acceptance occur at the point of origin using zero-defect sampling under MIL-STD-1916 or an equivalent zero-based plan, with unspecified attributes treated as major and verification levels assigned accordingly. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, with marking conforming to MIL-STD-129 and no special marking applied. Mercury or mercury compounds are prohibited in all preservation, packaging, and marking processes. Palletization follows DLA standards, and each unit is individually contained with specified cushioning and wrapping parameters. The contract includes two line items: 87 units destined for San Diego with a need ship date of March 25, 2028, and 506 units for Jacksonville with a need ship date of July 15, 2026, both with a 64-day delivery timeline and a total order quantity of 593 units. Pricing is fixed at $87.00 and $506.00 per unit respectively, with no variance allowed in quantity and delivery terms set FOB origin. The solicitation number is SPE4A6-26-T-05UM, issued by the Department of Defense’s ASC Commodities Division under NAICS code 332510, with the response deadline on July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract specifies the procurement of 159 blind rivets identified by NSN 5320-00-761-5994 under solicitation SPE4A6-26-T-05WB, classified as a commercial off-the-shelf item compliant with established military or consensus non-government standards. Only parts manufactured to the current revision of the applicable standard are acceptable, with prior revisions grandfathered only if they were current at the time of production. Approved manufacturers include HUCK INTERNATIONAL, INC. and NATIONAL AEROSPACE STANDARDS, with specific part numbers MLS100-M06-07C and NAS1921M06-07W designated for compliance. The item is flagged as critical for application and must be sourced exclusively from suppliers whose data is published in referenced aerospace standards such as MIL-HDBK-5J/MMPDS-01. All packaging must adhere to ASTM D3951 and MIL-STD-129 labeling requirements, with palletization following DLA Packaging Requirements, and all DLA Master List technical and quality requirements take precedence over any general packaging standards. Inspection and acceptance occur at destination, with no tolerance for quantity variation. Delivery is required FOB origin within 171 days, with an original deadline of November 30, 2026, and a need ship date of January 10, 2027. The unit of issue is each (EA), priced at a total contract value determined by the line item quantity. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with shipping instructions governed by DLAD Procurement Notes C19 and C20. The contract is administered by the ASC Commodities Division under the Department of Defense, with Michael Jefferson listed as the primary point of contact. Solicitation closed on July 22, 2026, and the NAICS code 332510 aligns with hardware manufacturing, confirming the commercial nature of the item under federal acquisition guidelines.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
First Article Test (FAT) Unit Production and SubmissionThe contract entails the fabrication and delivery of a single Government First Article Test unit under a subcontract awarded by the Defense Logistics Agency, part of the Department of Defense. The work is categorized under NAICS code 332510, indicating it involves the manufacturing of industrial machinery and equipment. The contractor is required to produce the unit in full compliance with government specifications and to submit a comprehensive documentation package that includes detailed inspection reports, material certifications, and all associated test data to verify conformance and performance. The unit must be delivered as a complete, ready-for-evaluation system suitable for government review and approval prior to any potential full-scale production. The contract was posted on July 14, 2026, and the place of performance and specific delivery location are not detailed in the provided data. Execution of this contract is critical for validating design and manufacturing processes before wider scale acquisition.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details