Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RING, RETAINING

Active
SPE7M1-26-U-4164Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 9 retaining rings with part number R14120C and NSN 5325-00-365-2850, identified as a commercial item of a type. The supplier is STANLEY AVIATION CORP located in Aurora, CO, and the delivery must be completed within 83 days after award. The solicitation number is SPE7M1-26-U-4164, issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of July 17, 2026, and a posting date of July 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions. Government identification must be removed from non-accepted supplies per RQ011 requirements. The NAICS code is 332510, indicating the item falls under manufacturing of industrial and commercial equipment. Primary point of contact is Bryan Fair, reachable via email and phone provided. The contract is unfettered by set-asides and is administered through the DIBBS platform for procurement actions.

General Info

Procurement of nine retaining rings NSN 5325-00-365-2850 via DLA federal solicitation due July 14, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-U-4164.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,RETAINING
RING, RETAINING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STANLEY AVIATION CORP (08118)
AURORA, CO
P/N R14120C
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR NSN/Part Number: 5325-00-365-2850 Quantity: 9 EA Purchase Request: 1000236485QTY: 9 Delivery: 83 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
PLUNGER, DETENTThe contract pertains to the procurement of 12 units of a PLUNGER, DETENT with NSN/Part Number 5340-01-487-6789, with a delivery requirement of 140 days after order. The solicitation, identified as SPE7L1-26-R-0107, was posted on July 15, 2026, and responses are due by August 14, 2026, under the Department of Defense’s Land Supply Chain. The item is subject to cybersecurity compliance under the Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring the vendor to be a certified third-party assessment organization. Technical and quality requirements referenced by R or I numbers must adhere to the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is controlled under ITAR or EAR, restricting exportation—including disclosure to foreign nationals—without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to export-controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and validation through the DLA questionnaire.
LAND SUPPLY CHAIN

POSTED

in about 9 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
BRACKET, DOUBLE ANGLEThe contract specifies the procurement of 126 units of a BRACKET, DOUBLE ANGLE with NSN 5340014369694 under solicitation SPE4A5-26-T-287K, requiring delivery within 171 days to Robins AFB, Georgia, FOB origin. All items must comply with DLA’s Technical and Quality Requirements as defined in the DLA Master List, including packaging standards under RP001 and labeling in accordance with MIL-STD-129. The material is to be commercially packaged per ASTM D3951 if non-hazardous per FED-STD-313, or per TQ requirement IP025 if hazardous, with DLA requirements superseding ASTM standards. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise stated and must align with designated verification levels or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively. The contract mandates a zero variance in quantity, with inspection and acceptance occurring at destination. Palletization must adhere to DLA packaging requirements and each unit must be physically marked per RQ017. The required ship date is January 10, 2027, with an original delivery deadline of December 23, 2026, and all packaging and labeling must use the specified unit of issue and quantity per unit pack. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and all correspondence and delivery must be directed to the provided Warner Robins address.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract pertains to the procurement of a retaining ring, identified by NSN 5325013836104 and part number MS90708-2050, manufactured in compliance with SAE AS90708 Revision D dated 06/01/2017 and referenced to MIL-DTL-21248F Revision F dated 06/22/2023. The item is classified as a critical application component requiring source inspection and strict adherence to physical identification and bare item marking standards. Quality assurance is governed by tailored higher-level contract requirements, with inspection and acceptance conducted at origin using zero-based sampling per MIL-STD-1916 or ASQ H1331, Table 1, and any unspecified attributes are treated as major with an AQL of 1.0. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging guidelines. The unit of issue is each, with a quantity of 24 units at a unit price of $24.00, totaling $576.00, and delivery is required FOB origin within five days of contract award. The item must be delivered to the 2nd Supply Depot in Busan, South Korea, with specific freight and transportation details outlined in DLAD procedure notes. Manufacturing must adhere strictly to the current revision of the governing standard, and prior revisions are not acceptable for production after the solicitation date. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCKThe contract is for the procurement of 1,794 units of a STUD ASSEMBLY, TURNLOCK FASTENER with NSN 5325-00-859-3783 and part number 27S8-12-1AB, sourced from ALCOA GLOBAL FASTENERS and HOWMET GLOBAL FASTENING SYSTEMS INC. The item is designated as a critical application component and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; any unspecifed attributes are treated as major with zero non-conformances required for acceptance unless otherwise stated in the contract. The supplier must provide full documentation for source approval and physically mark each item as required by RQ017, and remove any government identification from non-accepted supplies as per RQ011. All units must be packaged per ASTM D3951 and labeled and marked per MIL-STD-129, with palletization conforming to DLA’s RP001 packaging requirements. The delivery is FOB origin with a 190-day lead time, no quantity variance allowed, and inspection and acceptance occurring at destination. The specified unit of issue is each (EA), and the total contract value is based on the quantity and unit price outlined in the CLIN. The shipment must be delivered to DLA Distribution Jacksonville by January 29, 2027, with the original required delivery date set for March 6, 2027. Transportation instructions follow DLAD Proc Notes C19 and C20, and the purchasing office is under the Department of Defense’s Aviation Supply Chain, with primary point of contact Jade Stringfield. The contract was solicited under SPE4A1-26-T-2432 with a NAICS code of 332510 and a response deadline of July 22, 2026.
AVIATION SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, SYNCHROThe contract pertains to the procurement of eight CLAMP, SYNCHRO units under solicitation SPE4A6-26-T-02KP, with a delivery requirement of 163 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless superseded by an amendment. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and all packaging must adhere to DLA packaging standards. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required, though Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i) at the request of the Service customer. Measuring and test equipment standards are specified, though no specific data is provided for implementation. The NAICS code is 332510, and the place of performance is Tinker AFB, Oklahoma, with a delivery ZIP code of 73145-8000. The primary point of contact is Cherrell Jackson, reachable via email and phone, and the solicitation was posted on July 14, 2026, with responses due by July 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details