This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RING, RETAINING

Closed

SPE4A6-26-T-06ZRFederal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

Supply of Sleeve Nuts (NSN 5310-01-423-1667)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-002G

This solicitation, numbered SPE7LX-26-U-002G, is issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 26 clamping catches. The required items are identified by NSN 5340-01-563-2597 and part number 203080 from Heckler and Koch Defense Inc. This is a total small business set-aside under NAICS code 332510, with a delivery timeframe of 139 days after the order is placed. The contract mandates strict adherence to several technical and quality requirements, including CMMC Level 2 self-assessment, the handling of covered defense information, and specific DLA packaging standards. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 and RP001, with specific instructions for hazardous or commercial packaging based on FED-STD-313 and ASTM D3951.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L1-26-U-0723

This contract is for the procurement of mounting brackets, identified by NSN 5340014631833 and part number WK-877789-000, provided by Kidde-Fenwal, LLC. The order consists of an estimated quantity of 30 units with a delivery timeframe of 116 days. The agreement specifies that the items are critical application items and must be delivered FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. A significant environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware or packaging, with limited exceptions for specific functional components. Technical and quality requirements are governed by the DLA Master List, and the procurement is managed under solicitation number SPE7L1-26-U-0723.

POSTED

DEADLINE

Solicitation # SPE7M1-26-U-6089

This contract, identified as solicitation SPE7M1-26-U-6089, is issued by the Department of Defense Maritime Supply Chain for the procurement of five units of DREDGE EVR MNTR, specifically part number 196-J01 from Science Interactive Group, LLC. The requirement is categorized under NAICS code 332510 and is designated as a Total Small Business Set-Aside. The delivery timeline is set for 116 days after the order is placed, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking standards, and specific quality requirements including the removal of government identification from non-accepted supplies.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

18-8 Stainless steel hardware

Solicitation # W911S226U4474

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-11A9

This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 114 mounting plates under NSN 5340-00-737-9224. The contract is designated as a total small business set-aside under NAICS code 332510, with a required delivery timeframe of 84 days after receipt of order. Performance is centered in New Cumberland, Pennsylvania, and the primary point of contact is Michael Nordahl. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the contract involves technical data governed by ITAR and EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access restricted data.

POSTED

DEADLINE

53--ROD,STRAIGHT,HEADLESS

Solicitation # SPE7LX-26-U-002K

This solicitation, numbered SPE7LX-26-U-002K, is issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 1,769 headless straight rods under NSN 5340-01-370-7446. The contract is a total small business set-aside under NAICS code 332510, with a required delivery timeframe of 118 days after the order is placed. Compliance requirements are extensive, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and identification marking standards per MIL-STD-130N. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases. Additionally, the procurement involves export-controlled technical data subject to ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4179

This solicitation, identified as SPE4A6-26-U-4179, is issued by the Department of Defense ASC Commodities Division for the procurement of 1,282 solid rivets under NSN 5320-01-415-5182. The item is a critical application piece defined by non-government standards NASM20426 Revision 3 and NASM5674 Revision 2. This is a total small business set-aside under NAICS code 332510, with a contract maximum value of 350,000.00 dollars. Delivery is required within 99 days after order, with FOB, inspection, and acceptance all occurring at the origin. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, physical identification, and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality assurance and sampling must be conducted according to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Hardware must be manufactured according to the current revision of the applicable part standard.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

20--SMALL DR ASSY NO 5

Solicitation # SPE7M4-26-T-405Q

Solicitation SPE7M4-26-T-405Q is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two Small DR Assy No 5 units, identified by NSN 2040014384444. The items are associated with Lake Shore Systems, Inc. part numbers 7D3-05185 and 7D5-04999. The required delivery date is February 6, 2028, with shipping destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and technical standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, while palletization must comply with DLA requirement RP001. Special restrictions include the prohibition of intentionally added mercury per NAVSEA 5100-003D and compliance with the Buy American Act and Berry Amendment. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. Quotations must be submitted via the DIBBS portal by September 21, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4180

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-U-4180, is for the procurement of blind rivets identified by NSN 5320-01-375-7186. The requirement is for a quantity of 1,012 units with a delivery timeline of 14 days after receipt of order. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars and a guaranteed minimum quantity of 101 units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510, with quotations due by September 25, 2026. The contract mandates strict adherence to DLA packaging and quality requirements, specifically referencing RP001 and RA001. Compliance with MIL-STD-130N for the identification marking of U.S. military property is required, and the contractor must follow guidelines RQ011 and RQ017 regarding the removal of government identification from non-accepted supplies and physical item marking. The primary point of contact for this acquisition is Ashley Hardy.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

53--RECEPTACLE,TURNLOCK FA

Solicitation # SPE4A6-26-U-4125

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 416 turnlock fastener receptacles under NSN 5325-00-829-4558. The contract is designated as a total small business set-aside under NAICS code 332510. Delivery is required within 99 days after receipt of the order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Physical identification and bare item marking are also required to ensure compliance with government specifications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4136

This contract is a solicitation for the procurement of 300 blind rivets, identified by NSN 5320-01-305-4371. The item is classified as a commercial critical application item with specific part number requirements from approved sources including The Boeing Company, Hi-Shear Corporation, Lisi Aerospace Canada Corp, Monogram Aerospace Fasteners, and Howmet Global Fastening Systems. Delivery is required within 140 days from the order date, with FOB, inspection, and acceptance all occurring at the point of origin. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. This is a total small business set-aside under NAICS code 332510, managed by the Department of Defense ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 14 days

AI Contract Overview

The contract pertains to the procurement of a single retaining ring identified by NSN 5325-01-343-1088 with a delivery requirement of 10 days after order placement. The solicitation number is SPE4A6-26-T-06ZR, issued by the ASC Commodities Division of the Department of Defense, with performance location specified as Fort Hood, Texas. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, and the applicable revision is determined by the solicitation issue or award date depending on the acquisition size. The item must comply with strict identification standards including removal of government identifiers from non-accepted supplies and physical marking of bare items. Sampling and inspection protocols must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and acceptance criteria for critical, major, and minor attributes are fixed at verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Any unspecified attributes are treated as major. The supplier must be prepared to meet these stringent quality controls with no deviation allowed unless explicitly contractually modified. The response deadline is July 24, 2026, with solicitation posted on July 16, 2026, and all correspondence is to be directed to Jeremy Stokes at the provided DLA contact information.

General Info

Procure one retaining ring NSN 5325-01-343-1088, deliver in 10 days, Fort Hood, Texas, strict MIL-STD-1916 quality standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 40054 MOTOR POOL ROAD, FORT HOOD, TX, 76544, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06ZR DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 16

Solicitation

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Jeremy Stokes

contact@example.gov

+1 (555) 000-0000

Full Description

RING,RETAINING
RING,RETAINING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
NAVISTAR INTERNATIONAL CORP
SPRINGFIELD OH
ADEQUATE DATA FOR NSN/Part Number: 5325-01-343-1088 Quantity: 1 EA Purchase Request: 7017425327QTY: 1 Delivery: 10 days ADO