Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RING SET, PISTON

Active
SPE7M0-26-T-017EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single piston ring set with part number PR502H0001 and NSN 4310001460596, supplied by Parker Hannifin Corporation for use on a torpedo handling unit. Delivery is required within five days FOB destination, with a strict quantity tolerance of plus or minus zero percent, and acceptance is to occur at the delivery point. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, and palletization must adhere to RP001. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The item is to be delivered to a FPO address in the United States with shipment handled under DLA Procurement Notes C19 and C20. The original required delivery date is July 23, 2026, and the contract is issued under solicitation SPE7M0-26-T-017E with a response deadline of August 3, 2026. The contract specifies a single unit of issue, priced at one dollar per unit, and identifies Grace Beck of the Department of Defense as the primary point of contact.

General Info

Single piston ring set PR502H0001 delivered FOB destination by July 23, 2026, one dollar per unit, DLA standards apply.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

333912 - Air and Gas Compressor ManufacturingView NAICS

Place of Performance

UNIT 100494 BOX 1, FPO, AP, 96678, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M0-26-T-017E for DLA Maritime Supply Chain ESOC Buys

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Grace BECK
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING SET,PISTON
RING SET<(>,<)> PISTON
USED ON TORPEDO HANDLING UNIT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
PARKER HANNIFIN CORPORATION 84561 P/N PR502H0001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017575655 0001 EA 1.000
NSN/MATERIAL:4310001460596
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
SPE7M0-26-T-017E
SECTION B
PR: 7017575655 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N23193
USNS ALAN SHEPARD T AKE 3
UNIT 100494 BOX 1
FPO AP 96678
US
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N23193
USNS ALAN SHEPARD T AKE 3
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N231936200W642
RDD: 999
PROJ: HK5 TP 1
SUPP ADD: Y26049 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A41 DIST: P9B ADV: FC: F4
Need Ship Date:00/00/0000 Original Required Delivery Date:07/23/2026
SPE7M0-26-T-017E NSN/Part Number: 4310-00-146-0596 Quantity: 1 EA Purchase Request: 7017575655QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333912
New
DIBBS
COMPRESSOR, REFRIGERATIThe contract is for one refrigeration compressor, identified by NSN 4130-01-622-3092, under solicitation SPE8E8-26-Q-0438, issued by the Defense Logistics Agency. The item must be delivered within 30 days after the award date, with firm fixed pricing and no variance allowed in quantity. Inspection and acceptance occur at the destination, with delivery terms set at FOB origin. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, while all technical and quality specifications from the DLA Master List of Technical and Quality Requirements take precedence over any general standards. The item must be shipped via traceable freight methods, excluding parcel post, to the specified military address in Buzzards Bay, Massachusetts, with a single unit of issue. The shipment requires adherence to specific labeling and marking protocols, including the use of RDD and NMCS protocols, and is tied to a government project code and a unique tracking identifier. Pricing and payment information are to be completed by the vendor, but no discounts or allowances are permitted. The contract includes controlled handling provisions under the Covered Defense Information policy, emphasizing compliance with security and traceability requirements. Deliveries must align with the government’s stated need date of May 13, 2025, and the point of contact for inquiries is Elizabeth Macarthur. The solicitation was posted in July 2026, with responses due by the end of that month, and all contract terms are binding as specified, with final acceptance contingent upon compliance with all DLA-mandated documentation and packaging directives.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333912
New
DIBBS
LUBRICATORThis contract pertains to the procurement of a lubricator with NSN 4930-12-412-2959 and part numbers 106671 and 80095497 from Perma-Tec GmbH Co. KG and Hensoldt Sensors GmbH, respectively, under solicitation SPE8EE-26-T-2165. The requirement calls for 23 units to be delivered in 80 days with no variance in quantity, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all specifications from the DLA Master List of Technical and Quality Requirements take precedence and must be followed. All packaging and labeling must adhere to MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and the unit of issue is each. The need ship date is July 25, 2026, with the original required delivery date set for January 25, 2027. The contract incorporates technical and quality requirements identified by R or I numbers from the DLA Master List, and all applicable DLA procedural notes for transportation and shipping must be observed. The contract is issued under the Department of Defense using the authorized DoD unit of issue and is subject to the rules governing simplified or large acquisitions depending on the procurement size.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
PUMP, AXIAL PISTONSThis contract specifies the procurement of a single axial piston pump with part number P-3-4-33 from BIRD-JOHNSON PROPELLER COMPANY, LLC, identified by NSN 4320-01-644-6116, to be delivered within five days of award. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs all specifications not explicitly overridden. The use of ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional applications such as certain batteries, instruments, or weapon systems, with additional containment requirements for portable devices. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking conforming to MIL-STD-129 and no special markings required. The pump must be shipped via the fastest traceable means, not parcel post, to the Fleet Support Center at Mayport Naval Station, Florida, with delivery terms set FOB origin. The contract allows for zero variance in quantity and requires inspection and acceptance at destination. The award is linked to a specific purchase request and project code, with an original required delivery date of July 14, 2026, and the solicitation response deadline is August 3, 2026, under the solicitation number SPE7M0-26-T-017A, issued by the Department of Defense through the Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
Federal
Air Compressors and Maintenance PlanThis contract, solicited under FA9401-26-Q-0025, is a total small business set-aside for the procurement and installation of two Ingersoll Rand RS37i air compressors and one Polysep PSG-30 oil water separator, along with a comprehensive, multi-year maintenance plan for existing shop air compressor systems. The work requires a turnkey solution, including procurement, removal of existing units, disposal, installation, commissioning, and ongoing preventive and corrective maintenance for a total of nine air compressors, two oil separators, and three desiccant dryers currently in use. Equivalent equipment models are permitted, but bidders must submit full technical specifications and brochures for review. All equipment must meet strict performance criteria: each air compressor must deliver 120 PSI and 170 CPM, be air-cooled, and include an integrated or standalone desiccant dryer sized for dual-compressor output, while the oil water separator must handle 390 CPM with a 12-gallon absorption module and operate within a 32–120°F temperature range. The installation and maintenance must comply with manufacturer guidelines and military standards, including MIL-STD-130 and MIL-STD-129 for unique item identification and shipment labeling. The contract includes a base year and four option years for maintenance, with performance required to maintain 95% air compressor availability. A written Maintenance Control Program must be submitted within 30 days of award, and quarterly on-site maintenance by trained personnel is mandatory, with detailed logs of all services performed. The contract mandates a one-year craftsmanship warranty, starting upon government sign-off, and requires submission of a Quality Control Plan and compliance with all applicable OSHA, EPA, and DoD security regulations. All contractors must be SAM-registered, small business verified, and comply with trafficking, antiterrorism, cybersecurity, and supply chain prohibitions, including those related to the Xinjiang Uyghur Autonomous Region and the Maduro regime. Proposals must be submitted via email by 1400 hours MDT on August 4, 2026, following strict formatting rules with separate technical and pricing volumes, and must remain valid for 30 days. A mandatory site visit is scheduled for July 16, 2026, at Kirtland AFB. Performance is F.O.B. destination at Kirtland AFB, New Mexico, with electronic invo
FA9401 377 Msg Pk

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
Federal
Replace Bldg 65 Air Compressors (UPDATE)The contract solicitation COMBO-AFRL-RIZ-2026-0012, titled Replace Bldg 65 Air Compressors, is a total small business set-aside under FAR 19.5, targeting NAICS code 333912 for air and gas compressor manufacturing. It is managed by the Department of Defense through the USAF AFMC AFRIL PZL AFRIL PZLE office located at Wright Patterson Air Force Base, Ohio, with performance required at Building 65, Area B, 2790 D Street, WPAFB. A mandatory final site visit is scheduled for July 23, 2026, from 2:00 to 3:00 PM EST, and attendance is required in person with no virtual option available; all participants must RSVP by July 22, 2026, to michael.hornberger.1@us.af.mil and request base access passes by the same deadline if needed. Responses to the solicitation are due by July 27, 2026, at 4:00 PM EST, and the primary point of contact for inquiries is Mike Hornberger, reachable via email or phone at 385-634-3854.
FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333912
New
Federal
Air Compressor Trailer
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333912
New
Federal
USNS YUMA - SAUER COMPRESSORS
Mschq Norfolk

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333912
New
DIBBS
Diffuser, Compressor Component SupplyThe contract entails the supply of a single diffuser and compressor component, identified by NSN/Part number 2835004929450, to the Defense Logistics Agency Aviation under a commercial off-the-shelf arrangement. The item is to be delivered as-is with no assembly, integration, or modification required, ensuring immediate usability within existing systems. This procurement is categorized as a subcontract under NAICS code 333912, reflecting its classification within the aerospace and defense manufacturing sector. The offering is intended for direct use without customization, adhering to established commercial standards to streamline procurement and reduce lead times. The contract was posted on July 21, 2026, and is managed under the Department of Defense, with the performance location and specific office details not specified in the provided data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 333912
New
DIBBS
Supply of Compressor Air Disk (NSN: 2840014143995)
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 333912
New
DIBBS
Rotary Vacuum Pump Supply
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
Blower Assembly SupplyThe contract entails the supply of blower assemblies identified by NSN 4140010899585, specifically intended for integration into military cooling and pneumatic systems where reliability under extreme environmental conditions is critical. These assemblies must meet stringent performance and durability standards to ensure operational effectiveness in demanding military applications, with all components engineered to withstand high temperatures, vibration, moisture, and other harsh operational stresses. The contract is classified as a subcontract under the NAICS code 333912, indicating it pertains to other engine equipment manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Issued on July 21, 2026, the contract references a primary award with a delivery identifier linked to the DIBBS system, indicating it is part of a larger procurement structure. While specific quantities, delivery schedules, and pricing are not outlined here, the focus is on fulfilling the technical and logistical requirements necessary for deployment in defense systems. Performance is expected to occur according to military specifications, and the work is to be executed in alignment with Defense Logistics Agency protocols governing the procurement of critical components. No set-aside provisions are specified, and the place of performance details are not provided, suggesting the work may be carried out across multiple contractor locations as permitted under the terms of the subcontract.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 333912
New
DIBBS
VACUUM PUMP UNIT, ROThe contract is for one vacuum pump unit, part number 93613 and NSN 4310016416459, to be delivered within five days of award under solicitation SPE7M0-26-T-015U. The unit must comply with all DLA packaging requirements outlined in RP001 and be packaged in accordance with MIL-STD-2073-1E using method 31 for preservation, with no cushioning material and a packaging code of U. Marking must follow MIL-STD-129 with no special marking required. The delivery is FOB origin, inspection and acceptance occur at the destination, and no quantity variance is permitted. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials must be approved unless explicitly permitted by specification. The delivery destination is the Carrier Outfitting Material Support Center in Suffolk, VA, and shipment must be sent by the fastest traceable method—parcel post is prohibited. The contract prohibits removal of government identification from non-accepted supplies and is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The required delivery date is July 20, 2026, and the point of contact is Grace Beck of the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 335999
New
DIBBS
Electrical Insulation Sleeving SupplyThe contract is for the supply of electrical insulation sleeving with NSN 5970001447432, provided in 3-foot lengths, meeting all applicable military packaging, marking, and hazardous materials communication requirements. This is a commercial off-the-shelf item with no installation, maintenance, or service obligations included. The solicitation is issued under NAICS code 335999 as a subcontract and is part of the Department of Defense’s Maritime Supply Chain ESOC Buys initiative. The place of performance is designated as Bremerton, Washington, with a zip code of 98314-5001. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026, with no set-aside designation applied. All deliveries must fully comply with federal defense standards for labeling, handling, and documentation related to hazardous materials and military-grade packaging.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight ShippingThe contract involves the transportation of a component from its origin to Robins Air Force Base, Georgia, under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This includes arranging for potential customs clearance if the shipment originates internationally, as well as managing final-mile delivery to the designated military installation. The transportation services must reliably meet military logistics standards and ensure timely arrival at the specified ZIP code, 31098-1626. The solicitation is categorized as a subcontract under NAICS code 484220, which corresponds to truck transportation for local and long-distance freight. The opportunity was posted on July 22, 2026, with a bid deadline of August 3, 2026, and is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense. Bidders must be prepared to handle both domestic and international shipping logistics while adhering to government compliance requirements.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Logistics SupportThe contract seeks qualified vendors to provide certified military packaging, kitting, unit pack configuration, and labeling that complies with MIL-STD-129 standards, with the potential inclusion of hazardous material handling services. All work must meet stringent military specifications to ensure readiness, traceability, and safe transportation of defense-related items. The performance location is designated as Robins AFB with a zip code of 31098-1626, and the NAICS code 493190 indicates the focus on other support activities for transportation, aligning with logistics and supply chain functions. This solicitation is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys division, indicating it is part of a broader procurement effort supporting defense logistics operations. Responses are due by August 3, 2026, with the solicitation posted on July 22, 2026, providing a thirteen-day window for submissions. The contract does not specify a set-aside category, meaning it is open to all eligible businesses regardless of size or certification status. Vendors must be prepared to deliver fully compliant packaging and labeling systems, with attention to exacting military standards and the potential complexity of managing hazardous materials throughout the packaging and delivery process. The procurement link directs interested parties to the DIBBS platform for full details and submission procedures.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Electrical Backshell Component SupplyThe contract pertains to the supply and delivery of an electrical backshell component with part number 443HJ024NF0901S and national stock number 5935017215983, requiring strict adherence to DLA technical specifications, RP001 packaging standards, and MIL-STD-129 labeling protocols. This item is critical for military electrical systems and must be manufactured and delivered to meet exacting defense industry requirements. The opportunity is structured as a subcontract under the NAICS code 335999, indicating it falls under other electrical equipment and component manufacturing, and is managed by the Maritime Supply Chain ESOC Buys division within the Department of Defense. Performance of the contract is designated to occur at Robins AFB, Georgia, with the delivery destination specified by the zip code 31098-1626. All responses must be submitted by August 3, 2026, following the posting date of July 22, 2026, through the official Dibbs platform linked in the solicitation details.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)The contract requires the implementation of NIST SP 800-171 security controls to protect Controlled Unclassified Information (CUI) on systems operated by the subcontractor, in full alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) clause 252.204-7012. This includes establishing and maintaining a robust cybersecurity framework that safeguards CUI from unauthorized access, disclosure, or compromise, while ensuring all systems are configured, monitored, and audited to meet the specified NIST standards. The contractor must also establish and document processes for promptly detecting, reporting, and responding to cyber incidents involving CUI, as mandated by DFARS, including timely submission of incident reports to the Department of Defense. The contract is a subcontract under the Department of Defense, specifically tied to the Maritime Supply Chain ESOc Buys office, with performance required at Cherry Point, North Carolina, zip code 28533-0021. The NAICS code 541512 indicates the work involves computer systems design and related services, aligning with the technical nature of cybersecurity implementation. Proposals must be submitted by August 3, 2026, and the solicitation is open to qualified entities capable of demonstrating prior experience in securing CUI environments under federal cybersecurity regulations. The subcontractor is expected to possess the technical capability, documentation practices, and incident response infrastructure necessary to meet all compliance obligations without relying on external government support.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking & DLA-Compliant Logistics PreparationThe contract requires full compliance with DLA packaging, marking, and logistics standards, specifically including MIL-STD-129 labeling and barcoding for all items, ensuring uniform identification and traceability throughout the supply chain. All preparations must align with DLA directives for shipment readiness, with delivery coordinated under FOB Origin terms, meaning the supplier is responsible for loading and initial transit logistics from the specified location. The work must be performed in accordance with Department of Defense requirements, with the place of performance centered in Cherry Point, North Carolina, and the NAICS code 493190 indicates the scope involves other materials handling equipment and services related to logistics support. The opportunity is structured as a subcontract with a response deadline of August 3, 2026, and was posted on July 22, 2026, under the Maritime Supply Chain ESOC Buys organization. The acquiring entity is the Department of Defense, and all packaging and logistics activities must be completed to meet DLA’s stringent protocols for military distribution. While no specific set-aside or point of contact details are provided, interested parties must adhere to the mandatory labeling, documentation, and shipment coordination requirements outlined in DLA guidelines to qualify for award.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks provision of comprehensive hazard communication services aligned with global and U.S. regulatory standards, including the creation and maintenance of GHS-compliant labels and safety data sheets, as well as full adherence to OSHA and DFARS requirements governing hazardous materials. Services are intended to ensure that all chemical and material handling documentation meets federal safety and disclosure mandates, particularly for defense-related supply chain operations. The work is scoped under NAICS code 541690 and is structured as a subcontract under the Department of Defense, specifically managed by the Maritime Supply Chain ESOC Buys division. Performance location is designated as Cherry Point, North Carolina, with a zip code of 28533-0021, and all deliverables must be completed by the response deadline of August 3, 2026. The solicitation was posted on July 22, 2026, indicating a brief four-week window for qualified vendors to submit proposals. While no set-aside type is specified, the contract carries federal compliance obligations that require strict adherence to defense contracting standards. Interested parties must access the official solicitation through the provided DIBBS portal to review full requirements and submission guidelines.
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Precision Pipe Fitting Manufacturing – TEE, PIPE (NAWC P/N 2093-6-6)The contract seeks the manufacture of a precision TEE, PIPE component designated as NAWC P/N 2093-6-6, specifically for use in aircraft launch and recovery systems. All work must strictly adhere to NAVAIR technical standards, approved engineering drawings, and DLA quality assurance requirements to ensure mission-critical performance and reliability in naval aviation operations. The component is a high-tolerance precision fitting requiring advanced manufacturing capabilities and inspection protocols to meet stringent defense specifications. The opportunity is structured as a subcontract with a response deadline of August 3, 2026, and is posted under NAICS code 332912 for other forged and stamped metal product manufacturing. Performance is to be executed at Cherry Point, North Carolina, with a zip code of 28533-0021. The contracting activity is managed by the Maritime Supply Chain ESOC Buys division under the Department of Defense, though no point of contact or set-aside designation is provided. Subcontractors are expected to demonstrate proven capability in producing defense-grade aerospace components with full traceability and compliance documentation.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333911
New
DIBBS
Axial Piston Pump SupplyThe contract requires the supply of one axial piston pump identified by NSN 4320016446116, meeting all technical and regulatory standards specified under DLA RA001 and RP001, including proper hazard labeling in compliance with Department of Defense procurement protocols. The pump must be delivered to Mayport Naval Station, Florida, with full adherence to military logistics and safety requirements. The solicitation is classified as a subcontract under NAICS code 333911 and was posted on July 22, 2026, with responses due by August 3, 2026. The contract is administered by the Maritime Supply Chain ESOC Buys office under the Department of Defense, and all deliverables must align with DoD sourcing and compliance frameworks.
Pump and Pumping Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Nonmetallic Hose Assembly Manufacturing and DeliveryThe contract requires the manufacture, testing, packaging, and delivery of nonmetallic hose assemblies that strictly comply with MIL-DTL-8790F Rev F specifications and the Department of Defense’s DLA packaging and marking standards. All items must be classified as Type I with a non-extendable shelf life of 96 months and must originate exclusively from manufacturers listed on the Qualified Products List. The work must be performed to meet rigorous military-grade quality and traceability requirements, ensuring full compliance with all technical and documentation standards. This is a subcontract under the Department of Defense, issued by the Maritime Supply Chain ESOC Buys office, with a performance location in Jacksonville, Florida, ZIP 32212-5000. The solicitation was posted on July 22, 2026, and proposals are due by August 3, 2026. The NAICS code 332999 applies, indicating the work falls under miscellaneous fabricated metal product manufacturing. All deliverables must adhere to federal contracting protocols, with no set-aside provisions specified, and the contract is accessible via the DIBBS platform under solicitation number SPE7M026T016W.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of an electrical connector receptacle with part number ST5M1426A001 and NSN 5935-01-128-3657, sourced from approved manufacturers including Amphenol Corporation, SV Microwave Inc., and The Boeing Company. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards, including ASTM D3951. Use of ozone-depleting substances in any phase of production is strictly prohibited unless explicit written approval is obtained from the contracting officer, and this restriction overrides any conflicting specification but does not reduce performance expectations. Configuration changes require formal engineering change proposals or variance requests, and all items must be physically marked in accordance with RQ017. Packaging must comply with MIL-STD-129 and RP001 DLA packaging requirements, with hazardous materials following TQ requirement IP025 and non-hazardous items packaged under ASTM D3951 unless superseded by DLA requirements. The contract mandates delivery of 15 units FOB origin within five days, with no tolerance for quantity variance, inspection and acceptance occurring at destination. Shipping must use traceable freight methods, not parcel post, to the designated Jacksonville, Florida delivery point, with the original required delivery date set for July 21, 2026. The solicitation number is SPE7M0-26-T-017C, and the contract is issued under a federal acquisition framework with strict compliance to DoD standards and unit of issue protocols.
Electronic Connector Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METALThe contract pertains to the procurement of a metal tube assembly with NSN 4710012616858 and part number 709 1769, issued under solicitation SPE7M0-26-T-9950 by the Department of Defense through the Maritime Supply Chain ESOc Buys office. The requirement is for a single unit delivered within five days from the contract date, with delivery terms specified as FOB origin and no tolerance for quantity variation. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-H-775 for preservation, with Level A preservation required if preservation method ZZ is used. Marking must follow MIL-STD-129, and no special marking is required. The item is to be delivered to Wheeler Army Airfield in Hawaii, with the same location serving as the shipping, marking, and destination address. The unit of issue is AY, and the contract references DLA’s master list of technical and quality requirements, with applicable revisions determined by the solicitation or award date. All packaging and preservation must adhere to the latest DLA and federal standards, and transportation procedures are subject to DLAD Proc Notes C19 and C20. The original required delivery date is July 8, 2026, and the solicitation closed on July 27, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details