RIVET, BLIND

RIVET,BLIND
RIVET,BLIND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
FOR ITEMS LISTED IN MIL-HDBK-5J/MMPDS-01,
JOINT ALLOWABLE REQUIREMENTS APPLY.
********************************************
QUALIFIED SUPPLIERS CAN ONLY PROVIDE PARTS FROM
MANUFACTURERS WHOSE DATA HAS BEEN ACCEPTED FOR
PUBLICATION IN THAT REFERENCE.
"NS" LETTERS AFTER THE MATERIAL CODE INDICATE NO
PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR
INTERNAL). RIVETS WITH NO LETTER CODE AFTER THE
MATERIAL CODE (INDICATING VISIBLE LOCK) AND
RIVETS WITH THE LETTER "H" AFTER THE MATERIAL
CODE (INDICATING INTERNAL LOCK) ARE BOTH
ACCEPTABLE FOR THIS ITEM OF SUPPLY.
SPE4A6-26-T-23VE
SECTION B
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
TDP Rev D Gen 4 IAW BASIC NON GOVT STD NAS9301 REVISION NR 7 DTD 03/31/2020 PART PIECE NUMBER: STD P/N BNS-4-01
TDP Rev D Gen 4 IAW REFERENCE NON GOVT STD NAS1686 REVISION NR 5 DTD 04/30/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018074026 0001 EA 500.000
NSN/MATERIAL:5320011435078
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
PAT002
AUSTRALIAN GOV CARGO OFFICE
MULTI AIR FREIGHT C O DHL
SPE4A6-26-T-23VE
SECTION B
PR: 7018074026 PRLI: 0001 CONT’D
99 SOUTH HILL DRIVE, SUITE D
BRISBANE CA 94005-1209
US
FREIGHT SHIPPING ADDRESS:
PATV00
MH-60 ROMEO SIKORSKY AUSTRALIA
11 GARADI STREET
11 GARADI STREET
YERRIYONG
AU
MARKFOR
PATV00
MH-60 ROMEO SIKORSKY AUSTRALIA
11 GARADI STREET
11 GARADI STREET
YERRIYONG
AU
M/F: (TCN) PATV5V61030032
RDD: 185
PROJ: TP 2
SUPP ADD: PA2KOC SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: F9B ADV: 2B FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:04/16/2026
SPE4A6-26-T-23VE NSN/Part Number: 5320-01-143-5078 Quantity: 500 EA Purchase Request: 7018074026QTY: 500 Delivery: 20 days ADO