Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Energy was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Roadway Design and Pedestrian Facility Review

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
Surge & Transient System Detailed DesignThis subcontract opportunity with Garney Companies, Inc. involves providing detailed engineering and design services for a municipal wastewater effluent force main surge and transient system for projects within the Charles County Government. The scope of work includes the design of surge tanks, standpipes, and large diameter ductile iron and prestressed concrete cylinder pipe force mains exceeding 36 inches. Additionally, the contractor will perform engineering for bypass pumping, line stops, and pipe tapping, ultimately delivering final stamped design drawings and specifications through 60, 90, and 100 percent submission phases. The procurement is specifically set aside for SBA certified Women-Owned Small Businesses and Department of Transportation Disadvantaged Business Enterprises under NAICS code 541330. Interested parties must submit their responses by November 9, 2026.
Garney Companies, Inc.

POSTED

about 6 hours ago

DEADLINE

in 10 days
NAICS: 541330
New
Pure Water Southern California Direct Potable Reuse Testing Facility
Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility
Kiewit Infrastructure West Co. is soliciting proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This opportunity is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 29, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, for further details regarding the submission process and project requirements.
Kiewit Infrastructure West Co.

POSTED

about 6 hours ago

DEADLINE

in 4 days
NAICS: 541330
New
Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency
Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency
Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. This opportunity is targeted toward firms specializing in administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The project falls under several NAICS codes, including 541611, 541330, 541512, and 541820. Primary coordination for this solicitation is handled by Liz Jordan-Wettstein at Aanko Technologies Inc.
Aanko Technologies Inc.

POSTED

about 6 hours ago

DEADLINE

in 18 days
NAICS: 541330
New
SLED
On-Call Structural and Seismic/Disaster Engineering Services
Solicitation # FAS 2026-037
The City of Seattle Finance and Administrative Services Capital Development division is seeking to establish two on-call contracts for professional structural and seismic/disaster engineering services under solicitation FAS 2026-037. The selected consultants will provide technical expertise on an as-needed basis for small to medium projects throughout the planning, design, procurement, and construction phases, utilizing delivery methods such as Design-Bid-Build, Job Order Contracting, and the Small Works Roster. The scope of work includes structural engineering studies, seismic evaluations, confidence testing, fall protection design, and the preparation of construction documents stamped by a licensed engineer. All deliverables must adhere to specific CAD standards, including software compatibility with AutoCAD 2025.1.3 and AIA/US National CAD Standard V5. Eligible firms must be licensed to practice in Washington State and the City of Seattle, demonstrate experience with current code compliance, and provide three relevant projects completed within the last seven years. The contract features an initial one-year term with up to four optional one-year renewals, for a maximum duration of five years. Evaluation of proposals is based on relevant technical experience (40 percent), approach and methodology (30 percent), and an inclusion plan (15 percent) focusing on women and minority-owned businesses. Responses are due by December 2, 2026, via the OpenGov portal, with a target contract execution date of December 15, 2026. Consultants are required to maintain Commercial General Liability insurance and comply with various local and federal regulations, including ADA and City of Seattle labor ordinances.
Finance and Administrative Services

POSTED

about 14 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
International
Geotechnical Analysis and Stability ModelingThis subcontract for Geotechnical Analysis and Stability Modeling involves providing professional engineering analysis for prime contractors working on Upper Thames River Conservation Authority dam projects in Canada. The scope of work focuses on reviewing structural data and seepage at armour stone retaining walls, confirming embedment depths, and updating slope stability analyses utilizing the Slope/W model. The final deliverables for this engagement include comprehensive Geotechnical Reports and updated Slope/W models. To qualify for this contract, the service provider must hold a valid P.Eng license and ensure all work complies with the Ontario Accessibility Standards and the LRIA Technical Bulletin. Interested parties must submit their responses by November 18, 2026.
Upper Thames River Conservation Authority

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541330
New
International
R.T. Orr Dam Geotechnical Investigations
Solicitation # 2026-05
The Upper Thames River Conservation Authority is soliciting proposals for geotechnical investigations and assessments of the R.T. Orr Dam located in Stratford, Ontario. The project, which initiates in 2026 and must be substantially completed by March 15, 2027, is based on recommendations from a 2023 Dam Safety Review by D.M. Wills Associates Limited. The scope of work includes reviewing existing structural data, conducting a detailed seepage investigation at the downstream left armour stone retaining wall, performing supplementary field investigations for embankment slope stability, installing two nested monitoring wells in both earth embankments, and updating stability analyses for armour stone structures. All work must adhere to the LRIA Technical Bulletin for Geotechnical Design and Factors of Safety and meet Ontario Accessibility Standards for electronic deliverables. Proposals must be submitted electronically via the bids and tenders platform by 3:00 PM Eastern Daylight Time on November 18, 2026. The selection process utilizes a two-envelope system where technical qualifications in Envelope A are evaluated before the cost proposal in Envelope B is opened. Award decisions are based on best value, considering experience, understanding of the work, proposed methodology, schedule, and cost reasonableness. Selected consultants must provide proof of professional licensing, WSIB standing, and required insurance policies, while maintaining strict confidentiality regarding project information.
Upper Thames River Conservation Authority

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541330
New
SLED
Traffic Signal Installation Oversight and Quality AssuranceThe Traffic Signal Installation Oversight and Quality Assurance subcontract involves providing technical supervision and oversight for prime contractors working on regional signal synchronization projects for the City of Aliso Viejo. The selected provider will be responsible for conducting on-site field supervision to ensure that installation contractors adhere to approved plans, specifications, and estimates, as well as Caltrans signal installation standards. Key deliverables include the performance of post-construction walkthroughs and the submission of detailed installation compliance reports and walkthrough documentation. This project is located in Aliso Viejo, California, with a response deadline set for December 2, 2026.
City of Aliso Viejo

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Traffic Signal Infrastructure Design and PS&E PreparationThis subcontract opportunity involves providing professional engineering design services for regional signal synchronization projects within the City of Aliso Viejo, California. The selected contractor will support prime contractors by preparing comprehensive Plans, Specifications, and Estimates for traffic signal equipment and infrastructure improvements, while also developing technical responses and bid advertisements. A valid California Professional Engineer license is required to perform this work. The project culminates in the delivery of a complete PS&E package, with a response deadline set for December 2, 2026.
City of Aliso Viejo

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Traffic Data Collection and Field Study ServicesThis subcontract for Traffic Data Collection and Field Study Services supports prime contractors on regional signal synchronization projects for the City of Aliso Viejo. The scope of work involves comprehensive traffic analysis, including seven-day 24-hour machine counts, intersection turning movement counts, and floating car studies utilizing GPS and synchronized video analysis. All operations must be conducted within Caltrans right-of-way in strict accordance with 2026 CTFP Guidelines, with final deliverables consisting of field review memos and summarized count data provided in Excel format. The project is located in Aliso Viejo, California, under NAICS code 541330. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for December 2, 2026.
City of Aliso Viejo

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Oso Parkway/Pacific Park Drive/Glenwood Drive Regional Traffic Signal Synchronization Project
Solicitation # 20261026016
The City of Aliso Viejo is soliciting proposals for a professional licensed consultant to provide regional traffic signal synchronization services for the Oso Parkway, Pacific Park Drive, and Glenwood Drive corridor. The project involves coordinating traffic signals across multiple jurisdictions, including the Cities of Aliso Viejo, Laguna Hills, Mission Viejo, Laguna Niguel, the County of Orange, and Caltrans, extending from Moulton Parkway to the SR-241 Northbound On-Ramp. The projected period of performance is from April 1, 2027, to September 30, 2030. The selected consultant will be responsible for providing all necessary labor, materials, and equipment to implement optimized signal timing in accordance with the Regional Traffic Signal Synchronization Master Plan and the City's Local Signal Synchronization Plan. Proposals are due by December 2, 2026, and must be submitted as one hard copy and one electronic PDF on a USB drive, with the cost proposal in a separate sealed envelope. Award decisions will be based on a weighted evaluation of the consultant's ability and skills, character and reputation, cost reasonableness, ability to meet time requirements, financial resources, and previous experience with the vendor. The contract is governed by the laws of the State of California with venue in Orange County. Key requirements include compliance with California prevailing wage laws, adherence to the City's Minority Business Enterprise program, and the submission of annual political contribution disclosures.
City of Aliso Viejo

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Travel Lift Infrastructure Structural DesignThis subcontract for Travel Lift Infrastructure Structural Design involves providing structural and civil engineering services for heavy-duty boat lift foundations at the Port of Brookings-Harbor in Brookings, Oregon. The selected contractor will be responsible for developing demolition plans for existing infrastructure and designing foundations, slabs, and ramps specifically rated for an 85-ton travel lift in accordance with manufacturer requirements. The project requires the contractor to hold a valid Oregon Professional Engineering license to deliver the necessary demolition plans and structural design drawings. Interested parties must submit their responses by December 2, 2026, under NAICS code 541330.
Port of Brookings-harbor

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Electrical Service and Exterior Lighting DesignThis subcontract opportunity with the Port of Brookings-Harbor involves the evaluation and design of electrical distribution and safety lighting systems. The selected provider will support prime contractors by designing electrical services, distribution panels, and exterior industrial lighting specifically tailored to enhance safety, security, and operational efficiency. The primary deliverables for this engagement include comprehensive electrical design drawings and technical specifications. Qualified candidates must hold a valid Oregon Professional Engineering license to perform the work in Brookings, Oregon. Interested parties should note that the response deadline is December 2, 2026. This project falls under NAICS code 541330, focusing on specialized engineering services for critical port infrastructure.
Port of Brookings-harbor

POSTED

about 17 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The Roadway Design and Pedestrian Facility Review is a subcontract opportunity issued by the Department of Energy through the Brookhaven National Labor-Doe Contractor. The project focuses on the evaluation of existing roadway geometry, sidewalks, bike lanes, and crosswalks, with a specific emphasis on ensuring ADA compliance. The selected contractor will be responsible for developing conceptual drawings and providing detailed improvement recommendations for the site located in Upton, New York. This procurement falls under NAICS code 541330 for engineering services. Interested parties must submit their responses by the deadline of August 17, 2026. The contract aims to enhance pedestrian safety and infrastructure accessibility within the designated performance area.

General Info

DOE subcontract for ADA roadway and pedestrian facility design reviews in Upton, New York.

Agency

Department Of Energy → Brookhaven National Labor -Doe Contractor

NAICS

541330 - Engineering Services

Place of Performance

Upton, NY, 11973, USA

Set-Aside

NONE

Documents

This scope was carved out of SJ482107.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Traffic Study and Safety Consulting Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Brookhaven National Labor -Doe Contractor
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Energy → Brookhaven National Labor -Doe Contractor
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Evaluate existing roadway geometry, crosswalks, sidewalks, bike lanes, and ADA compliance; develop conceptual drawings and improvement recommendations.

More opportunities from Department Of Energy → Brookhaven National Labor -Doe Contractor

Same awarding agency

NAICS: 331210
New
Federal
Seamless 21-6-9 Tubing
Solicitation # MB484555
Brookhaven National Laboratory is soliciting quotes for the procurement of 2,500 feet of seamless grade 21-6-9 (UNS S21900) stainless steel tubing under solicitation MB484555. The required tubing must have a nominal outside diameter of 0.313 inches and a wall thickness of 0.035 inches, delivered in straight lengths of approximately 42 feet. While annealed tubing per ASTM A269/A269M-25 is preferred, cold-worked AMS 5562 is also acceptable. Welded or welded and drawn tubing is strictly prohibited. The total quantity delivered may vary within a tolerance of plus or minus 10 percent. Award will be based on the Lowest Price Technically Acceptable (LPTA) offer. Technical requirements include mandatory eddy current testing per ASTM A269/A269M-25 and the provision of a Certificate of Conformance, a chemical composition report traceable to a specific heat or lot, and a quality inspection report including dimensional checks. Quotes must include the country of origin and be submitted to Mark Bryan by November 10, 2026, at 5:00 PM ET. BNL will cover shipping costs for domestic products via its own carriers, while foreign offerors must include shipping costs in their firm-fixed price quote. Extended lead times associated with mill runs are acceptable.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
Federal
HSR HF Dipole and Quad SC Magnet PS and Quench
Solicitation # APP00730MB
Brookhaven Science Associates, acting as the operator of Brookhaven National Laboratory, has issued a Request for Information and Sources Sought notice under solicitation APP00730MB for the design and manufacture of high-current power supply systems for the Electron-Ion Collider Hadron Storage Ring. The project requires the procurement of two modular units: Model A for the main arc dipole circuit and Model B for the main arc quadrupole circuit. These systems must include programmable PLC controls, current measurement and regulation equipment, quench-protection and control systems, and local operator interfaces. The selected contractor will be responsible for the full lifecycle of the equipment, including nonrecurring engineering, design, analysis, manufacture, inspection, testing, and delivery to the facility in Upton, New York. Technical requirements mandate compliance with ISO 9001 and BNL-QA-101 quality standards, as well as adherence to IEC, IEEE, NEC, and NEMA specifications. The contractor must perform initial testing at their own facility or a pre-approved site, with final acceptance occurring at Brookhaven National Laboratory within 90 days of receipt. Deliverables include a program plan, monthly progress reports, and a series of design reviews. Interested suppliers must submit their capabilities, estimated lead times, a compliance matrix, budgetary pricing, and any exceptions to the general terms and conditions to the contract specialist by December 11, 2026, at 5 PM EST.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 331210
New
Federal
Supply of Seamless 21-6-9 (UNS S21900) TubingThis subcontract involves the supply of 2,500 feet of precision seamless tubing for prime contractors working on projects at the Brookhaven National Laboratory in Upton. The tubing must be manufactured or sourced to grade 21-6-9 (UNS S21900) specifications, featuring a nominal outside diameter of 0.313 inches and a wall thickness of 0.035 inches. The selected provider is required to deliver a comprehensive documentation package to ensure quality compliance, which must include a Certificate of Conformance, a chemical composition report, and a detailed inspection report. This procurement falls under NAICS code 331210 and is associated with the Department of Energy.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 541380
New
Federal
Testing, Commissioning & Field ServicesThis subcontract for Testing, Commissioning and Field Services supports prime contractors on projects at Brookhaven National Laboratory in Upton. The scope of work involves performing Factory Acceptance Testing and on-site commissioning, specifically executing Acceptance Test Procedures and site acceptance testing. The contractor is responsible for utilizing high-current test equipment and oscilloscopes to provide remote diagnostics and training, ultimately delivering signed-off reports and commissioning certificates. Managed under the Department of Energy via a Brookhaven National Laboratory contractor, the opportunity falls under NAICS code 541380. The solicitation was posted on October 26, 2026, with a response deadline set for December 11, 2026.
Testing Laboratories and Services

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
Federal
Specialized Electrical Component SupplyThis subcontract involves the supply of high-specification electrical components for prime contractors working on high-current power systems at Brookhaven National Laboratory in Upton. The scope of work requires the delivery of UL-listed and NRTL-recognized power semiconductors, as well as wire and cable that have undergone flame-propagation testing in accordance with IEEE 1202 standards. The contractor is responsible for providing comprehensive material certifications and certified electrical components, which must include detailed heat analysis reports. This opportunity is managed under the Department of Energy through a Brookhaven National Laboratory contractor, with a response deadline set for December 11, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
Federal
NRTL Certification & Field Evaluation ServicesThis subcontract for NRTL Certification and Field Evaluation Services involves performing safety certifications and field evaluations for electrical systems at Brookhaven National Laboratory in Upton. The selected provider will verify that completed power supplies comply with UL 508 and other applicable safety standards, ultimately delivering formal NRTL Certification and Field Evaluation Reports to prime contractors. To be eligible, the contractor must hold accreditation as a Nationally Recognized Testing Laboratory, such as UL, Intertek, or TUV. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Energy. The response deadline for this requirement is December 11, 2026.
Testing Laboratories and Services

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541511
New
Federal
Control Software Development & PLC IntegrationThis subcontract for Control Software Development and PLC Integration involves the creation of control software and logic for power supply systems at Brookhaven National Laboratory. The scope of work includes programming PLC interfaces, developing remote interface protocols, and implementing oscilloscope monitoring. A critical requirement of the project is the establishment and adherence to a formal software configuration management procedure. The successful contractor will be responsible for delivering fully functional control software, PLC logic, and comprehensive software configuration management documentation. This project is associated with the Department of Energy and will be performed in Upton. Interested parties must submit their responses by December 11, 2026.
Custom Computer Programming Services

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335313
New
Federal
High-Current Power Supply Fabrication & AssemblyThis subcontract for High-Current Power Supply Fabrication and Assembly involves the manufacture and assembly of Model A and Model B power supply units for prime contractors supporting Brookhaven National Laboratory projects. The scope of work includes fabricating enclosures, assembling electrical components, performing wiring, and integrating power semiconductors utilizing high-current busbars and UL 508 industrial control equipment. The selected provider must maintain ISO 9001 certification and ensure all integrated components are recognized by a Nationally Recognized Testing Laboratory. Performance will take place in Upton, and the final deliverable consists of completed power supply systems. The response deadline for this opportunity is December 11, 2026.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Federal
Power Supply System Design & IntegrationThe Power Supply System Design and Integration subcontract involves providing comprehensive engineering design, systems integration, and project management for prime contractors supporting the Brookhaven National Laboratory EIC Hadron Storage Ring projects. The scope of work includes conducting Preliminary and Final Design Reviews, creating detailed schematics, drawings, and parts lists, and overseeing the Manufacturing, Inspection, and Test Plan. Key deliverables for this engagement include PDR and FDR reports, a final detailed design package, and a comprehensive management program plan. The project is associated with the Department of Energy and will be performed in Upton, with a response deadline set for December 11, 2026.
Engineering Services

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238220
Federal
Mechanical Services Basic Ordering Agreement (BOA)
Solicitation # SJ472268
Brookhaven Science Associates, LLC, operator of Brookhaven National Laboratory, is soliciting offers for a Mechanical Services Basic Ordering Agreement (BOA) under NAICS 238220. This total small business set-aside requires a contractor to provide all labor, materials, tools, and supervision for various mechanical construction projects across the BNL site, with specific work authorized through individual task orders. The anticipated period of performance begins in November 2026 for a base year, with four optional one-year increments extending the potential term through November 2031. While individual BOAs will have specific ceilings, all awarded BOAs under this effort will share an estimated aggregate ceiling of 20 million dollars. The award will be based on the lowest priced technically acceptable (LPTA) criteria, with BSA awarding the BOA to between one and three qualified offerors. To be responsive, offerors must attend a mandatory virtual overview and site visit on October 15, 2026, and submit a completed Qualification Criteria Form, a Sample Project Pricing Sheet, and a Schedule of Unit Rates by October 30, 2026. Technical acceptability is contingent upon meeting all qualification criteria, including safety records and staffing capabilities. Contractors must comply with New York prevailing wage determinations and the BNL Health and Safety Plan. Performance requirements include the ability to mobilize personnel to the site within two hours for after-hours or weekend emergencies and starting task order work within two working days of a Notice to Proceed. Bonding requirements are tiered by project value, requiring payment bonds for work between 35,000 and 150,000 dollars, and both performance and payment bonds for work exceeding 150,000 dollars. All materials must adhere to the Buy American-Construction Materials clause, and electrical or fire protection equipment must be certified by a Nationally Recognized Testing Laboratory.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 811210
Federal
Oxford PlasmaLab 100 tool PLC upgrade or its Equivalent
Solicitation # 482829
Brookhaven National Laboratory, a Department of Energy facility located in Upton, New York, is seeking a contractor for a PLC upgrade or equivalent for the Oxford PlasmaLab 100 tool. This requirement falls under NAICS code 811210 and PSC J066, focusing on the maintenance, repair, and rebuilding of laboratory equipment. The project will be conducted as a full and open competition, with the anticipated contract being awarded as a Firm Fixed Price agreement. The pre-solicitation notice was posted on September 29, 2026, with the formal solicitation expected to be issued by the end of October 2026. The anticipated award date is also slated for late October 2026. A critical performance milestone is site acceptance, which must be achieved approximately six months after the contract award. Interested vendors are advised to refer to the Statement of Work dated September 1, 2026, and must submit quotes via SAM.gov once the formal solicitation is posted.
Electronic and Precision Equipment Repair and Maintenance

POSTED

8 days ago

DEADLINE

in 8 days
View Details
NAICS: 541380
Federal
UHV and High-Voltage Testing ServicesThis subcontract for UHV and High-Voltage Testing Services involves providing independent testing and quality assurance for prime contractors operating on Department of Energy projects at Brookhaven National Laboratory in Upton. The scope of work focuses on critical technical evaluations, including high-voltage breakdown testing, dimensional verification using CMM, and vacuum leak detection through helium leak testing. To ensure technical precision and compliance, all activities must adhere to BNL-specific quality assurance standards and ISO/IEC 17025 requirements. The selected provider is responsible for delivering comprehensive testing and quality assurance reports to document all findings and verifications.
Testing Laboratories and Services

POSTED

9 days ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541330
Closed
Federal
Traffic Operations and Capacity Analysis
Brookhaven National Labor -Doe Contractor

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541330
Closed
Federal
Cable Management and Labeling
Ibc Acq Svcs Directorate (00004)

POSTED

3 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541330
Closed
Federal
Engineering and Technical Oversight
Fletc Glynco Procurement Office

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541330
Closed
Federal
UID/Serialization and Logistics Compliance Services
Mschq Norfolk

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541330
Federal
Technical Review of Gomal Zam Irrigation Projects
Acquisitions - Aqm Momentum

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
Custom Mold Design and Engineering Services
W071 Endist Portland

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541330
Closed
Federal
Fire Protection Engineering Design & Installation
FA4460 19 Cons Pka

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541330
Closed
Federal
Quality Control and Inspection Support (Subconsultant)
Pwr Olym MABO(83000)

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541330
Closed
Federal
Preliminary Retrofit Concept Design
National Aeronautics And Space Administration

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Closed
Federal
ASCE Tier 2 Seismic Evaluation
National Aeronautics And Space Administration

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541330
Closed
Federal
Operations and Maintenance Manual Development & Delivery
Department Of Commerce Nist

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541330
Closed
Federal
Watertight Scuttle Design and Engineering
Navsup Flt Logistics Ctr Puget Sound

POSTED

3 months ago

CLOSED

3 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS