Rock Crusher Hammers

The Forest Service intends to award a HUBZone sole source contract to Roadtech Inc. under Negotiated Procedures for the purchase of a mobile rock crusher. This requirement is proposed to be a sole source procurement to a certified HUBZone company under the authority of the HUBZone Act of 1997 (15 U.S.C. 631 note) and FAR 19.1302. Justification for such procedures: This type of machine is less expensive to operate, recycles previously unsuitable material on site thereby eliminating disposal problems, can operate on small single lane roads, minimizes material handling and hauling costs, has low environmental impacts, and has the capability of blending soil stabilizers or dust abatement products into the road material. This method not only completely eliminates the costly removal and replacement of the material to be crushed, but can re-establish a native roadbed without spreading seeds and/or diseases from Forest to Forest. This is a notice of intent and is not a request for competitive proposals. If there are businesses that can provide the aforementioned product, and meet the minimum requirements listed below, they must respond by submitting in writing an expression of interest in competing on the procurement and provide supporting documentation as to how their proposed product meets the stated minimum requirements by February 19, 2016 at 3:00 p.m. MST. The mobile rock crusher hammers must meet the following minimum requirements: The mobile rock crusher shall be capable of taking oversized rock that has been windrowed along the roadway and crush it as the machine progresses down the road. Operating sites may vary from steep, narrow mountain roads to developed pit sites. The machine shall be capable of blending all types of material, regardless of shape or hardness. Machine shall be capable of crushing rocks up to 16" to an aggregate graduation of " minus. Mobile rock crusher shall be built to a size that does NOT require any oversize or overweight permits when being transported on State, County, or Federal Highway; crusher shall have adjustment capability of hammers and anvils to adjust for wear to increase the consistency of the aggregate produced; equipment shall be designed with a multi-position lift frame which allows the crusher head to be rotated so crews may work with the underside of the machine facing them at working level to increase safety; the crusher shall have shock protection to reduce vibration; have a removable anvil weldment for ease of service and repair, and the crusher shall have radial attachment of the tooling, which results in much easier and faster replacement of wear parts. A determination by the Government not to compete this proposed action based upon responses to this notice is solely at the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement.