Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Roll-Up and Personnel Doors with High-Security Locks

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and installation of four insulated roll-up doors and steel personnel doors equipped with high-security locks, primarily for use at a military facility in Higashimatsushima with postal code 981-0503. The work falls under NAICS code 332311, indicating the scope is focused on metal door and door frame manufacturing and installation, with an emphasis on durability and security compliance. All components must meet stringent performance standards to ensure resistance to forced entry and environmental wear, reflecting the Department of Defense’s operational requirements for the site. Delivery, installation, and commissioning are to be completed in accordance with specified technical and safety protocols, with the contractor responsible for ensuring full compliance with military-grade security specifications. The solicitation was posted on July 25, 2026, and responses are due by August 7, 2026, at 02:00 UTC. This is classified as a subcontract opportunity under the Department of Defense, specifically managed by the FA5025 356 Eceg Pk office, and there is no set-aside designation specified for small businesses or other categories. The place of performance is clearly identified, but no point of contact information is provided, and the office address lacks specific details beyond the location in Japan. All work must be completed within the deadline, and successful bidders are expected to adhere to all federal procurement requirements and defense facility access standards.

General Info

Supply and install four high-security insulated roll-up and steel doors at military facility in Higashimatsushima, Japan, per DoD standards.

Agency

Department Of Defense → FA5025 356 Eceg PkView Agency

NAICS

332311 - Prefabricated Metal Building and Component ManufacturingView NAICS

Place of Performance

Higashimatsushima, JP-04, 981-0503, JPN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA5025 356 Eceg Pk
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA5025 356 Eceg Pk
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and installation of four insulated roll-up doors and steel personnel doors with high-security locks.

Similar Contracts

Same NAICS industry code

NAICS: 332311
New
Federal
15 MXS Mezzanine CabinetThis solicitation, identified as FA521526Q0014 and titled “15 MXS Mezzanine Cabinet,” seeks a custom two-tier modular storage cabinet system with mezzanine access for the 15MxS Propulsion flight tool room at Joint Base Pearl Harbor Hickam, Hawaii. The system must include stackable cabinets and drawers with locking doors to securely store equipment, tools, Due In For Maintenance parts, and hazardous materials, all arranged to maximize vertical space. The total system must measure 37 feet 6 inches in width, with a cabinet bank width of 32 feet 6 inches and an overall height of approximately 9 feet 10.255 inches, featuring a mezzanine platform at 4 feet 11.13 inches. The walkway across the top must be a metal grated surface with full-length guardrails and multiple support posts for stability, and access must be provided via a staircase on the right side with safety railings. All components—including stairs, walkways, and cabinets—must be finished in a uniform blue color. The design and specifications are detailed in Attachment FA521526Q0014 - Item Description, which was updated to resolve inconsistencies. The procurement is a 100% Small Business set-aside under FAR 19.5, with a NAICS code of 332311 and a size standard of 750 employees. All responses must come from small businesses capable of meeting the technical requirements, and vendors must include their CAGE code, UEI, company information, past performance, and relevant experience in their submissions. Quotes must be submitted via email to 1st Lt Kasarah Hernandez and A1C Franz Yap no later than 2:00 PM Hawaii Standard Time on July 27, 2026, with all proposals in PDF or Word format. The government has not assumed any financial obligation, as funds are not presently available under RFO clause 52.232-18, and all quotes must remain valid through September 30, 2026. Delivery is FOB destination, and the contractor is responsible for both delivery and installation at Joint Base Pearl Harbor Hickam, HI 96853. Proprietary information must be clearly marked and segregated, and submissions are to be provided at no cost to the government. The solicitation was posted on July 24
FA5215 766 Ess Pkp

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332311
New
Federal
Guard BoothThe solicitation FA875126Q0902 is a firm fixed-price Request for Quotation issued as a combined synopsis/solicitation under FAR Part 12 for the procurement of a relocatable guard booth, set aside exclusively for small businesses with a size standard of 750 employees under NAICS code 332311. The item must be delivered FOB Destination to AFRL RIOLSC in Rome, NY 13441-4516, with the place of delivery, acceptance, and FOB point all aligned to this location. Delivery is required no later than October 1, 2026, to avoid winter conditions, and offerors are urged to provide the most aggressive delivery schedule possible. The offeror must submit engineering drawings for government engineer approval prior to shipment and provide at least the same warranty terms offered commercially, including one year for structural defects, thirty days for electrical and HVAC components, and fourteen days for glass, windows, and delivery damage. The contract is subject to strict compliance with Unique Item Identifier (UID) labeling requirements for all line items priced at $5,000 or more, which must use a two-dimensional Data Matrix with ECC200 symbology incorporating the CAGE code and serial number, and optionally part/lot/batch number, with associated labeling costs included in the fixed price. All potential offerors must comply with a comprehensive set of FAR and DFARS clauses, including certifications through DFARS 252.204-7998 Alternate A, provisions prohibiting the acquisition of covered defense telecommunications equipment from specified foreign sources, adherence to Buy American requirements, and compliance with prohibitions regarding business operations with the Maduro regime and the Xinjiang Uyghur Autonomous Region. The solicitation mandates electronic submission through SAM, payment via Electronic Funds Transfer using WAWF, and requires representation and certification of small business status, compliance with labor laws, equal opportunity, trafficking prohibitions, and cybersecurity safeguards through clauses such as 52.240-93. Evaluation will be based on two equally weighted factors: technical capability to meet the specified requirements and price, with no discussions anticipated unless deemed necessary by the Contracting Officer. Offerors must submit quotes by 3:00 PM Eastern Time on August 5, 2026, and include technical descriptions and drawings with their submissions. The clause 252.244-7999 with deviation 2
FA8751 Afrl Riko

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332311
New
Federal
Custom Metal Fabrication Services for Specialty Tactical Shelters and Ancillary EquipmentThe U.S. Army Combat Capabilities Development Command - Soldier Center is conducting market research to identify qualified sources for custom metal fabrication services in support of specialty tactical shelters and ancillary equipment, with a primary focus on the ECU Frame Assembly (Drawing 17-3-4850). This sources-sought announcement is not a solicitation and does not obligate the government to award a contract; it aims to gather industry capability data to inform a potential future Blanket Purchase Agreement. Respondents must submit a whitepaper not exceeding ten pages, detailing company information including CAGE code, socioeconomic status, and NAICS code 332311, along with a cost estimate for fabricating the referenced assembly. The work involves precision CNC machining, structural welding to AWS D1.1 and D1.2 standards, surface finishing including CARC paint and anodizing, and compliance with MIL-STD-130 for part marking using 25-high Gothic characters and black epoxy ink or a commercial equivalent. Materials must meet ASTM B221 specifications for aluminum 6061-T6 and 6063-T5, with deviations requiring written requests and engineer approval. Welding procedures and first article inspections are not required unless specified on a purchase order, and no additional non-destructive examination is mandated beyond visual and dimensional checks under ISO 9001:2015. Packaging and preservation follow MIL-STD-2073-1 only if required in a future purchase order; otherwise, commercial standards apply. Technical drawings are distributed with unlimited rights, and specialty metals under DFARS 252.225-7009 are not subject to domestic melt requirements if below the Simplified Acquisition Threshold. All submissions must be electronic and received by July 31, 2026, and any questions must be submitted by July 24, 2026. Delivery is expected to Natick, Massachusetts, though final destinations will be confirmed via purchase order. The acquisition set-aside status and contract structure remain undetermined, and no funding is currently available.
W6QK Acc-Apg Natick

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → FA5025 356 Eceg Pk

Same awarding agency

NAICS: 333120
New
Federal
ERHS CAT CTL AttachmentsThis solicitation, designated FA502526QA015 and titled ERHS CAT CTL Attachments, is a Total Small Business Set-Aside under FAR 19.5 targeting NAICS code 333120 for procurements by the Department of Defense, specifically the office FA5025 356 Eceg Pk. It seeks the acquisition of one CAT CTL 265 Compact Track Loader along with six hydraulic attachments: Box Blade BB124, Brushcutter BRX318, Bucket-SK Plate 86in, Cold Planer PC306, Root Rake Grapple, and Broom BA121, each with precise technical specifications including operating widths, cutting or sweeping capacities, hydraulic flow requirements, and dimensional constraints. The primary machine must support dual travel speeds of 5 mph and 8.1 mph, offer either Standard Flow or High Flow XPS hydraulic packages, and comply with ROPS ISO 3471:2008 and FOPS ISO 3449:2005 Level I safety standards. The place of performance is Yigo, Guam, with a submission deadline of July 31, 2026, and responses directed to the primary point of contact, Daniel Callahan, with secondary correspondence routed through the 356 ETSG/CONS Org Box. While detailed technical requirements for each attachment are specified, the solicitation lacks information on pricing, quantities, delivery schedules, packaging and marking standards, inspection protocols, evaluation factors, contract administration details, and submission instructions beyond the deadline and set-aside status, with all referenced attachments provided as spec sheets supporting the performance requirements.
Construction Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details