Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ROLLER, LINEAR-ROTARY M

Active
SPE4A6-26-T-08JFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 283 units of a linear-rotary motion roller with NSN 3120-00-796-8207, issued under solicitation SPE4A6-26-T-08JF by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after award, with performance designated to occur in Barstow, California, 92311-5014. This procurement is subject to a suite of technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which govern material specifications and compliance procedures. Packaging must adhere to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item involves technical data controlled under export regulations—either ITAR or EAR—mandating strict compliance with DFARS 252.225-7048. Access to this sensitive data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and received formal approval from DLA. Additionally, government identification must be removed from any non-accepted supplies, and all measuring and test equipment used must meet specified calibration and traceability criteria. The solicitation closed on July 29, 2026, and the NAICS code 332991 identifies the industry classification for this specialized mechanical component.

General Info

Procurement of 283 linear-rotary rollers for Barstow, CA, with strict export controls, DLA quality standards, and certified access required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

REC OFFICER 442-295-4148, BARSTOW, CA, 92311-5014, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Robye Dewitt
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROLLER,LINEAR-ROTARY MOTION
ROLLER,LINEAR-ROTARY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3120-00-796-8207 Quantity: 283 EA Purchase Request: 7017572036QTY: 283 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLINDRThis solicitation is for a cylindrical roller bearing, part number 59637, with NSN 3110003853504, requiring five units for delivery within 305 days FOB origin. The item is source controlled and must be manufactured and tested in strict compliance with limited rights data held by approved sources—Parker Hannifin and Regal Beloit America, Inc.—with no government provision of the technical data. Only vendors with direct access to this data or traceability to the approved sources may submit quotes. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with more than 50 percent of the total cost of all components—rolling elements, retainer, inner and outer race—originating from these regions. A signed Contractor’s Declaration regarding domestic content is mandatory and must be submitted upon request; failure to provide it will disqualify the quote. Inspection and acceptance occur at the origin, and no unit identification is required under DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including preservation methods tailored to bearing type and closure, with all marking conforming to MIL-STD-129. The item is designated as critical application and has no shelf life. All measures, testing equipment, and quality controls must meet the DLA Master List of Technical and Quality Requirements, and the entire procurement is subject to restrictions outlined in DFARS 252.225-7016. If no compliant offers are received, the solicitation may be canceled or held pending a waiver.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLINThe contract calls for the procurement of nine cylindrical roller bearings, identified by NSN 3110-01-275-0221 and part number SB-1165, with delivery required within 171 days FOB origin. The bearings must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total cost of all components—rolling elements, retainer, inner race, and outer race—originating from these regions, as mandated by DFARS 252.225-7016. Contractors must submit a declaration verifying the domestic or foreign origin of materials through the DLA Foreign Bearing website, and failure to provide this documentation will disqualify the quote. The solicitation is a total small business set-aside under NAICS code 332991, with no unit of issue substitutions permitted and no quantity variance allowed. Packaging and preservation must strictly comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including marking per MIL-STD-129 and preservation methods tailored to bearing type and closure, as specified in referenced tables and paragraphs. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries or sensors as defined by NAVSEA, and any portable items containing mercury must include a secondary containment system. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions tied to the solicitation or RFP issue date. Inspection and acceptance occur at the destination, and the contractor’s packaging facility must meet quality assurance verification standards outlined in MIL-DTL-197M.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThe contract is for the procurement of 65 units of a BUSHING, SLEEVE with NSN 3120-01-490-4720 under solicitation SPE4A6-26-T-08CL, issued by the ASC COMMODITIES DIVISION of the Department of Defense. Delivery is required within 171 days of award, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002. The item is subject to stringent cybersecurity and export control requirements, including CMMC Level 2 certification for any third-party assessment organization involved, and the handling of Covered Defense Information as defined under RD002. Technical data associated with this item is controlled under ITAR or EAR, meaning any export—including disclosure to foreign persons within the United States—requires prior authorization from the Department of State or Department of Commerce, with DFARS 252.225-7048 governing compliance. Distribution of this controlled data is strictly limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received formal approval from DLA to access such data. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and is managed by primary point of contact Jerald Jones, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, NEEDLEThis contract specifies the procurement of a needle roller bearing identified by part number 10921639 and NSN 3110-00-446-3211, with a required quantity of 62 units delivered FOB origin within 171 days. The bearing must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging under MIL-STD-2073-1E and MIL-DTL-197M, with preservation using MIL-PRF-10924 grease or equivalent. All items must be marked in accordance with MIL-STD-129 and palletized per DLA packaging requirements. Only approved manufacturers—Schaeffler Group USA Inc., Roller Bearing Co. of America Inc., Timken US Corp., and McGill Manufacturing Co. Inc.—are acceptable sources. A strict domestic sourcing restriction mandates that the bearing be manufactured in the United States, its outlying areas, or Canada, and that over 50% of the total component cost (races, rollers, retainer) must originate from these regions. Contractors must submit a signed declaration regarding the origin of materials, failure to provide which may disqualify the offer. No item unique identification is required per customer request, and configuration changes require formal engineering change proposals or variance requests. The contract is a total small business set-aside under NAICS code 332991, with a unit price of $62.00 per unit, totaling $3,844. Inspection and acceptance occur at destination, with zero variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAThe contract pertains to the procurement of 52 annular ball bearings identified by NSN 3110-01-155-3504 under solicitation SPE4A6-26-T-08MD, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days of award, with performance location in New Cumberland, PA, and responses due by July 29, 2026. The item is subject to multiple technical and quality requirements referenced from the DLA Master List, including physical identification standards, tailored quality controls, and inspection at origin. Although Item Unique Identification is not mandated per the service customer’s request, the bearing is classified as covered defense information, triggering cybersecurity maturity model certification level 2 compliance for third-party assessors. Technical data associated with the item is controlled under ITAR or EAR, restricting export and disclosure to foreign persons without prior Department of State or Commerce authorization, and access is limited to contractors certified under the US/Canada Joint Certification Program, having completed mandatory DLA export control training and questionnaires. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. The contract falls under NAICS code 332991 and is classified as a federal procurement with no set-aside designation.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThe contract is for one bushing, sleeve with NSN 3120-00-821-9873 and part number 50769, supplied by WATEROUS COMPANY 79218. The item must be delivered within 60 days to Barstow, California, FOB origin, with no variance permitted in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation method 33, corrosion preventive compound 49, and wrapping material GB, with all marking adhering to MIL-STD-129. Palletization follows DLA packaging requirements. The delivery is directed to the Central Receiving Warehouse at MDMC Production Plant Barstow, with the parcel post address provided for official correspondence. The solicitation number is SPE4A6-26-T-08JH, posted July 21, 2026, with responses due by July 29, 2026, and is issued under the DoD’s authorized unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect on the solicitation issue date controlling compliance.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUSTThis contract specifies the procurement of a thrust washer bearing identified by NSN 3120-01-706-2913 and part numbers 181-11 and 20139-ITEM-4.2.2 from RIX INDUSTRIES, with a quantity of four units to be delivered FOB origin within 171 days. The item must comply with DLA’s technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking indicated. Inspection and acceptance occur at origin, and no unit identification is required per the service customer’s request. Mercury and mercury-containing compounds are strictly prohibited except in defined functional applications such as batteries, fluorescent lamps, or instruments specified by NAVSEA, with additional containment rules for portable devices. Packaging must adhere to DLA’s specific guidelines including palletization and container codes, and shipment is directed to the DDSP New Cumberland facility in Pennsylvania. The contract enforces strict compliance with measuring and test equipment standards and prohibits any alteration or removal of government identification from non-accepted supplies. All requirements are binding under the contract revision in effect at the solicitation issue date, and delivery must be completed by March 5, 2027, with a need ship date of January 17, 2027.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULARThe contract pertains to the procurement of 12 annular ball bearings with part number 3110-01-033-5719, issued under solicitation SPE4A6-26-T-08GR by the Defense Logistics Agency’s ASC Commodities Division. The item is classified as a commercial item and must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total cost of its components—rolling elements, retainer, inner race, or outer race—originating from these regions. Contractors must submit a completed declaration regarding the domestic or foreign nature of materials, available via the DLA foreign bearing waiver website; failure to provide this may disqualify the quote. The only acceptable source is Schatz Bearing Corp. with CAGE code 21760, and the item must conform to configuration control item DWG 2505435, latest revision, with identification per MIL-STD-130N. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by acquisition type and solicitation timelines. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; attribute verification levels are assigned as VII, IV, and II for critical, major, and minor characteristics respectively. The bearing is subject to export control under ITAR or EAR, and contractors must hold approved US/Canada Joint Certification Program certification, complete required DOD training and DLA questionnaire, and receive DLA authorization to handle the technical data. Delivery is required within five days of award, with a response deadline of July 29, 2026; the solicitation may be canceled or held pending a waiver if no compliant offers are received.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SPHERThis contract specifies the procurement of a plain spherical bearing identified by NSN 3120-01-500-3111 and part number SPE4A6-26-T-08EG, with a quantity of four units to be delivered FOB origin within 171 days. The item is designated as a critical application component for Electric Boat Corporation and Kamatics Corporation, with specific part numbers H552-0603-112 and KNR28-CSV-33 respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The bearing must comply with stringent packaging and preservation standards according to MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including proper preservation methods based on bearing type and closure, use of approved lubricants, and adherence to marking and identification protocols under MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited except for specified exempted applications such as functional batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and NAVSEA-approved chemical reagents, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance are to occur at origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required. All preservation, packaging, and marking procedures must conform to quality assurance verification standards outlined in MIL-DTL-197M, and the contractor’s facility must meet these verification requirements. The unit of issue is each, with a fixed quantity and zero variance allowed.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CAM FOLLOWER, NEEDLE BEThe contract is for the procurement of 1,058 units of a cam follower with needle bearing, identified by NSN 3110-00-293-8703 and manufacturer part number 750116 from MCCGILL MANUFACTURING CO, INC. The item is designated as a critical application component with no shelf life requirement, and while item unique identification is not mandated per DFARS 252.211-7003(c)(1)(i), all packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes and methods. The delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the manufacturer’s location. The required delivery date is October 12, 2027, with a 429-day performance window, and the item must be shipped to DLA Distribution Warner Robins in Georgia per the specified parcel post and freight addresses. Technical and quality requirements are governed by referenced documents including TDP Rev D Gen 4, QAP 13873, and the DLA Master List of Technical and Quality Requirements, with casting or forging often necessary for manufacture—vendors needing tooling or material support are directed to submit a Casting and Forging Assistance Request. Cybersecurity compliance is required under CMMC Level 2, and the contract includes DLA packaging standards and transportation procedures. This solicitation is a total small business set-aside under NAICS code 332991, with a response deadline of July 29, 2026, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of 29 units of a sleeve bearing identified by NSN 3120-01-286-9203 under solicitation SPE4A6-26-T-08MW. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is subject to DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, quality conformance inspections, and inspection and acceptance at the origin. Government identification must be removed from non-accepted supplies, and item unique identification is not required as per Service customer request. Export control restrictions apply to technical data associated with this item, governed by ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including foreign national employees or subsidiaries, with DFARS 252.225-7048 enforcing compliance. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and verified approval from DLA may access this controlled data. Delivery is due within 171 days after order, with performance occurring in New Cumberland, Pennsylvania, and all inquiries should be directed to Malik Lowe at the provided contact information.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULARThis solicitation requires the procurement of an annular ball bearing with the NSN 3110-00-961-9214 and part number 5307W from TIMKEN CO, with a quantity of 86 units to be delivered within 171 days FOB origin. The bearing must be manufactured in the United States, its outlying areas, or Canada, and the cost of its components—rolling elements, retainer, inner race, and outer race—produced in these countries must exceed 50% of the total component cost, in compliance with DFARS Clause 252.225-7016. A contractor’s declaration regarding the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to provide this documentation will disqualify the quote. If no qualified offers are received, the solicitation may be canceled or held pending a waiver approval under DFARS 225.7009-4. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date. The item is designated as a critical application item and must meet all applicable packaging, preservation, and marking standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure. No item unique identification is required. Packaging must adhere to DLA packaging requirements, and all components must be inspected and accepted at origin. The contract is issued under solicitation SPE4A6-26-T-08JZ with a response deadline of July 29, 2026.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LIGHTThe contract specifies the procurement of five units of a light-transmitting indicating panel, identified by NSN 6220-01-509-3310 and part number 74J808070-823, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to rigorous technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with verification levels and sampling methods strictly defined per MIL-STD-1916 or comparable zero-based sampling plans; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Manufacturing and packaging adherence is mandated under DLA Packaging Requirements and MIL-STD-2073-1E, with packaging coded as U, using E5 unit containers and no cushioning material. All items must be marked per MIL-STD-129 with the special fragile code 01-01, and palletization must comply with DLA guidelines. The supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and remove government identification from non-accepted supplies. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the contract requires adherence to specific transportation protocols per DLAD Proc Notes C19 and C20. The original required delivery date is December 18, 2027, with a need ship date of January 17, 2027, under solicitation SPE4A6-26-T-08CN, issued by the Department of Defense’s ASC Commodities Division.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of a sleeve bearing with NSN 3120-01-286-0906, quantity of four units, under solicitation SPE4A6-26-T-08MV. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Inspection and acceptance occur at origin using sampling methods aligned with MIL-STD-1916 or ASQ H1331, Table 1, or a zero-based plan; critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is designated as a critical application requiring casting or forging, with tooling typically held by the manufacturer, and sourcing assistance must be requested through DLA’s designated channels. Only approved sources are KAMATICS CORPORATION and ROLLER BEARING COMPANY OF AMERICA, each with specific part numbers. Item Unique Identification is not required per the Service customer’s request. Delivery is FOB origin with a 171-day lead time, final delivery due by April 20, 2027, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and palletization adhere strictly to DLA’s procurement standards, and all documentation must support source approval and manufacturing compliance.
Support Activities for Coal Mining

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract specifies the procurement of a light indicator component with NSN 6210011737858 under solicitation SPE4A6-26-T-08UD, requiring delivery of three units at one each to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 by June 25, 2026, with a 20-day delivery window and FOB destination terms. Strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including fragile labeling and prohibition of mercury or mercury compounds in preservation, packaging, or marking. The item is classified as a critical application with bare part marking requirements for DRS NAVAL POWER SYSTEMS INC P/N 6981ED166-535, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revisions controlled by the solicitation or amendment date. No shelf life applies, and quantity variance is strictly zero percent. Shipping and transportation follow DLAD procedural notes C19 and C20, with vendors required to use VSM for logistics. The contract enforces zero tolerance for mercury exposure and mandates compliance with verified sampling levels and packaging codes for unit containment and protection.
Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract covers the procurement of 1,585 retaining rings with NSN 5325-00-169-8023 under solicitation SPE4A6-26-T-08HH, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must bear physical identification per bare item marking requirements. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. Tailored quality requirements apply to both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, with DFARS 252.225-7048 enforcing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the point of contact is Monica Clark of the ASC Commodities Division, Department of Defense.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, IMPELLER, LEFT HANDThe contract specifies the procurement of two left-hand impeller nuts, identified by NSN 5310-01-424-5905 and part number 15-0125-01, manufactured by Buffalo Pumps Inc. and supplied under solicitation SPE4A6-26-T-08ST. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical attributes require zero non-conformances, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited in the item, its preservation, packaging, or marking, except for specified functional uses in instrumentation or batteries, which must include secondary containment per NAVSEA 5100-003D. Preservation is to be conducted in accordance with ASTM D3951 using preservation method code 10. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. The delivery window is 171 days from contract award, with a required ship date of January 17, 2027, and the original delivery deadline was October 30, 2026. All logistics and transportation protocols follow DLA procedural notes C19 and C20, and the unit of issue is each (EA) at a unit price of $2.00, totaling $4.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details