Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Roofing and Waterproofing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the installation of built-up roofing systems, membrane systems, flashings, and waterproofing solutions for both roof and below-grade areas, ensuring comprehensive protection against water intrusion and structural degradation. This work falls under NAICS code 238160, classifying it specifically as roofing construction, and is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency. The scope encompasses all necessary materials and labor to execute these systems to meet military-grade standards for durability, weather resistance, and long-term performance across diverse environmental conditions. The project was posted on July 17, 2026, and is identified by contract numbers SPE60526D1004 and SPE60526FHRY2, with performance location details undefined but expected to align with Department of Defense facilities requiring roofing and waterproofing upgrades. The subcontract nature indicates the prime contractor has engaged specialized subcontractors to deliver these technical services, likely supporting the maintenance or modernization of defense infrastructure. No set-aside provisions or specific point of contact are listed, suggesting the award process followed standard procurement procedures for classified or sensitive defense projects.

General Info

Built-up roofing and waterproofing subcontract for DoD facilities under DLA, NAICS 238160, contract numbers SPE60526D1004 and SPE60526FHRY2.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

238160 - Roofing ContractorsView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of built-up roofing, membrane systems, flashings, and waterproofing for below-grade and roof areas.

Similar Contracts

Same NAICS industry code

McClure MS Roof Replacement, B27025

Solicitation # PE-63310-NONST-2027-000000218

The contract involves a full roof replacement at McClure Middle School in Georgia, requiring the complete removal of all existing granular surfaced modified bitumen membranes, insulation, flashings, and trim down to the structural metal deck. A new insulated modified bitumen roofing system will be installed, including deck boards, vapor barriers, insulation, tapered insulation and crickets where needed, cover boards, and multiple-ply modified bitumen roofing with full flashings. All sheet metal components such as coping, gutters, leaders, expansion joints, and associated flashings must be removed and replaced. Roof drains will be removed and replaced with new units including overflow drain bowls. Rooftop mechanical units will be disconnected, relocated to new curbs or rails, and reconnected to ensure a minimum 14-foot high base flashing above the finished roof surface. Roof hatches, access ladders, and all roof-to-roof ladders will be removed and replaced with crossover ship ladders as specified in the drawings. The scope covers all low-sloped roofing areas and must comply with all applicable building codes and standards. The solicitation number is PE-63310-NONST-2027-000000218, issued by the Cobb County Board of Education, with proposals due by September 1, 2026, and points of contact listed under Wendy Bell for inquiries.

Cobb County Board of Education

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Spicer Rowing Barn Roof Replacement and Painting

Solicitation # ITB 27-08

Sealed bids for the Spicer Rowing Barn Roof Replacement and Painting project are being solicited by the Town of Groton under solicitation number ITB 27-08, with submissions due by 2:00 p.m. prevailing time on August 20, 2026, at the Town Hall Annex located at 134 Groton Long Point Road in Groton, Connecticut. All bids must be securely sealed and clearly labeled with the project title to ensure proper handling and public opening at the designated time and location. The project is managed under the Connecticut Department of Administrative Services Procurement division, with Chris Dennis serving as the primary point of contact, reachable via email at cdennis@groton-ct.gov. This procurement is classified as a state and local government solicitation and does not specify any small business set-asides or NAICS codes. The work shall be performed at the Spicer Rowing Barn in Groton, Connecticut, and all interested parties are directed to the official CTSource portal for additional details.

DAS Procurement

POSTED

about 14 hours ago

DEADLINE

Town Hall Exterior Renovations

Solicitation # BD-26-1599-TSH01-THS01-131700

The Town of Sherborn is soliciting bids for exterior renovations to its Town Hall, including roofing, chimney repairs, door replacement, and the complete replacement of steps and stoop. All bids must be submitted electronically through the platform www.projectdoc.com, with no hard copy submissions accepted. The solicitation, identified by the number BD-26-1599-TSH01-THS01-131700, was posted on July 29, 2026, and responses are due by 7:00 PM on August 26, 2026. Work is to be performed at the Town Hall located at Washington Street in Sherborn, Massachusetts, 01770. The procurement is managed by the agency’s primary point of contact, Jeanne Guthrie, in her role as Purchaser, and is categorized under state, local, or educational government procurement. Bidders must review all requirements through the official electronic portal at the provided UI link to ensure full compliance with submission procedures and specifications.

TSH01 - Town of Sherborn

POSTED

about 16 hours ago

DEADLINE

MIL DEPT - AASF Operations Flat Roof Replacement

Solicitation # 73999

Contractors are invited to submit bids for the replacement of the flat roof over the Flight Operations section at the Army Aviation Support Facility located at 141 Shamrock Road in South Burlington, Vermont. The scope of work requires full-depth reconstruction down to the decking, including installation of a new substrate, drain bodies, insulation, and a TPO membrane to ensure a durable, weatherproof system. The project is part of a broader effort to maintain facility integrity and operational readiness, with all work expected to meet high standards for performance and longevity in a demanding military environment. The solicitation is open under the state-level agency designation, with the Vermont Department of Economic Development serving as the overseeing entity. Bids must be submitted by September 4, 2026, at 6:00 AM Eastern Time, following the posting of the solicitation on July 29, 2026. The opportunity is identified by solicitation number 73999 and can be accessed via the Vermont Business Registry’s online portal. The primary point of contact for questions or additional information is Ryan Farina, reachable by phone at 802-735-4554 or via email at ryan.farina@partner.vermont.gov. There is no set-aside designation specified, and the NAICS code is not provided, but the project is classified under state and local government (SLED) procurement and is performed entirely in Vermont. All potential bidders are expected to thoroughly review the full solicitation documents for detailed technical specifications, compliance requirements, and submission guidelines.

Department of Economic Development

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Rear Deck Replacement

Solicitation # BD-18-2077-HA242-HA242-131731

The project involves the removal and replacement of existing decks and stairs at a location in Provincetown, Massachusetts, alongside the abatement and replacement of the first floor low slope roof with an EPDM roofing system. All bids must be submitted electronically through biddocs.com by the specified deadline; hard copy submissions are not accepted, and interested parties must register as electronic bidders in accordance with the instructions provided in the bid documents. The solicitation is issued under number BD-18-2077-HA242-HA242-131731 by the Massachusetts agency HA242 - Provincetown, with a response deadline of August 13, 2026 at 3:00 PM Eastern Time. The place of performance is at Harry Kemp Way, Provincetown, MA 02657, and the primary point of contact for inquiries is Danielle Reid, Purchaser, reachable at 508-999-6220.

HA242 - Provincetown

POSTED

about 18 hours ago

DEADLINE

Roof Replacement - 2026 SFD Castaic O&M Center

Solicitation # 20260728010

The contract solicitation for Roof Replacement at the 2026 SFD Castaic O&M Center is issued under solicitation number 20260728010 with a posted date of July 29, 2026, and a response deadline of August 19, 2026, at 6:00 PM. The project falls under NAICS code 238160 for roofing contractors and is being managed by the California Department of Water Resources as a state-level entity. The work is specifically located at the Castaic facility in California with a zip code of 91384. No set-aside designation is specified for this opportunity. The primary point of contact for inquiries is doe_specs@water.ca.gov and all submissions must be made through the BidAmerica platform via the provided UI link. The contract value is listed as $16, though this appears to be a placeholder or error given the scale of a full roof replacement project.

Department of Water Resources

POSTED

about 19 hours ago

DEADLINE

Roofing Installation – Commercial Roof ReplacementThe contract entails the full removal and replacement of existing roofs on three commercial structures: the Hatchery, the 6-Stall Garage, and the Sturgeon Building. Work includes installing new roofing systems with comprehensive flashing, insulation, and all necessary components to meet established construction specifications. The project requires strict adherence to industry standards and performance requirements to ensure durability and weather resistance. All work must be completed in compliance with the defined technical and safety protocols outlined in the construction specifications. This is a small business set-aside subcontract under the NAICS code 238160 for roofing contractors, administered by the Department of the Interior through the Gaoa Fws agency. The opportunity was posted on July 29, 2026, with a response deadline of August 14, 2026. The contract is open exclusively to qualified small businesses, and performance is expected to occur at the designated facility locations, though specific addresses are not provided. Interested parties must submit proposals prior to the deadline to be considered for award.

POSTED

about 20 hours ago

DEADLINE

Roofing and Waterproofing ServicesThe contract is for roofing and waterproofing services covering inspection, repair, and replacement of various roofing systems including flat roofs, metal roofing, and waterproofing applications on buildings and structures under the Department of Defense. It is categorized as a subcontract with the NAICS code 238160, indicating it falls under roofing contracting services. The work is specifically targeted for performance in Fussa, with the solicitation posted on July 29, 2026, and responses due by August 17, 2026. The contract is managed under the agency designation FA5209 374 Cons Pk, and while no set-aside details or point of contact information are provided, the scope emphasizes comprehensive maintenance and structural integrity of roofing systems to meet federal facility standards.

FA5209 374 Cons Pk

POSTED

about 20 hours ago

DEADLINE

Roofing and WaterproofingThe contract involves the installation of built-up roofing systems, single-ply membranes, and flashings to provide comprehensive waterproofing solutions for a Department of Defense facility located at Fort Stewart, Georgia, 31314. The work is classified under NAICS code 238160, indicating it is a subcontract for roofing and waterproofing services, and is part of a broader effort by the W074 Endist Savannah office to maintain and upgrade infrastructure. The opportunity was posted on July 29, 2026, with a response deadline of August 6, 2026, at 4:00 PM, requiring qualified subcontractors to submit proposals within this timeframe. The place of performance is specifically tied to Fort Stewart, and all work must comply with federal standards for defense-related construction, though no set-aside provisions or specific eligibility requirements are outlined.

W074 Endist Savannah

POSTED

about 20 hours ago

DEADLINE

Indefinite Delivery/Indefinite Quantity (IDIQ) Contract to Repair and Replace Roof Systems at Commander Fleet Activities Yokosuka (CFAY) and Naval Air Facility Atsugi (NAFA), Japan

Solicitation # N4008426B1005

This contract amendment pertains to an indefinite delivery/indefinite quantity (IDIQ) agreement for the repair and replacement of roof systems at Commander Fleet Activities Yokosuka and Naval Air Facility Atsugi in Japan. The amendment serves solely to provide additional information through Notice 2, which was issued in response to pre-bid inquiries and does not alter the original solicitation terms unless formally amended via an SF30 document. The bid submission deadline remains fixed at 2:30 p.m. JST on August 5, 2026, and all offerors must acknowledge receipt of this amendment by completing Block 19 of the SF1442 form. The solicitation number is N4008426B1005, with a NAICS code of 238160 for roofing contractors, and is managed by the Naval Facilities Engineering Systems Command Far East under the Department of Defense. All contractual activities are to be performed at the specified military installations in Japan, with the office address listed as FPO AP 96349-0013. Primary point of contact for inquiries is Tomoko Kanzaki, with Teresa Aguon as the secondary contact, both reachable through official Navy email addresses. The solicitation was posted on July 29, 2026, and can be accessed via the official SAM.gov link.

Navfacsyscom Far East

POSTED

about 20 hours ago

DEADLINE

Fishermen's Terminal C-15 Building ImprovementThe Port of Seattle through its Waterfront Project Management division is planning significant improvements to Building C-15 at Fishermen’s Terminal, with work focused on replacing aging and deteriorated components to ensure structural integrity and operational efficiency. The scope includes removal and replacement of the existing roof gutters, repair or replacement of select rooftop vents, installation of 151 new windows, replacement of exterior cladding, and structural repairs to the building’s tower structure. These upgrades are intended to extend the building’s service life, improve energy efficiency, and enhance safety for occupants and users of the terminal. The procurement is being managed as a forecasted opportunity under NAICS code 238160, which corresponds to Roofing Contractors, indicating the project will likely be awarded to a specialized contractor with experience in commercial building restoration. The primary point of contact for inquiries is Valarie Jarvi, reachable via phone or email, with Rod Jackson serving as the project manager. Although the solicitation number is not yet assigned and there is no specified set-aside designation, the project is publicly listed with a posted date of July 29, 2026, and further details can be accessed through the Port of Seattle’s official solicitation portal. Potential bidders are advised to monitor for the formal solicitation release to submit proposals in alignment with timeline and compliance requirements.

Waterfront Project Management

POSTED

DEADLINE

Terminal Envelope Upgrade - Roof Replacement Project (DBB)The Port of Seattle’s Aviation Facilities & Infrastructure division is forecasting a roof replacement project to demolish and install approximately 13,600 square feet of new roofing membrane and insulation, including all associated flashing and roof drains. This effort is part of a broader terminal envelope upgrade aimed at improving building integrity, weather resistance, and long-term maintenance efficiency. The project is classified under NAICS code 238160, indicating it falls under roofing contractor services, and will follow a design-bid-build delivery method. All work is to be performed at the Port’s aviation facilities, though specific location details are not provided. The opportunity is posted as a forecast with no set-aside designation, open to qualified contractors preparing for upcoming procurement. Angela Peterson serves as the primary point of contact for general inquiries, while John McWilliams is listed as the project manager responsible for overseeing execution. The forecast was published on July 29, 2026, and further details can be accessed through the Port’s solicitation portal.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-158J

A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

SUTURE KIT, SURGICAL

Solicitation # SPE2DS-26-T-284G

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a SUTURE KIT, SURGICAL with NSN 6515-01-309-3551, requesting a quantity of four units. The solicitation, identified by number SPE2DS-26-T-284G, was posted on July 29, 2026, with responses due by August 4, 2026. This procurement is designated as a federal action and does not specify any set-aside preferences or NAICS codes. The kits are intended for delivery to a U.S.-based performance location, though no specific city or state is provided. All inquiries and submissions must be directed through the DIBBS platform via the provided UI link, and no point of contact information is listed in the solicitation details.

POSTED

about 15 hours ago

DEADLINE

LAMP, INCANDESCENT

Solicitation # SPE8E7-26-T-3437

This contract specifies the procurement of 10 incandescent lamps under NSN 6240-01-440-9827 and purchase request 7017660194, with a total price of $10.00 and a delivery requirement of 20 days from the contract award date. The items must be delivered FOB origin and inspected at destination, with zero variance allowed in quantity. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override all other standards, and must be marked and labeled per MIL-STD-129. If the lamps are not classified as hazardous under FED-STD-313, they must be commercially packaged in accordance with ASTM D3951, but only if not superseded by a higher-priority DLA requirement. Palletization must follow RP001 standards. The shipment must be sent via traceable freight methods, explicitly prohibiting parcel post. The delivery is directed to Sheppard Air Force Base, Texas, with a required delivery date of October 30, 2025. The contract incorporates technical and quality specifications referenced by R and I numbers from the DLA Master List, and source approval documentation is required. The solicitation number is SPE8E7-26-T-3437, issued by the Defense Logistics Agency under NAICS code 335139, and is managed by point of contact Kelly Mitchell.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

SLEEVE, RETAINER

Solicitation # SPE8E8-26-T-4911

SLEEVE, RETAINER is a single-unit procurement under contract SPE8E8-26-T-4911 issued by the Defense Logistics Agency for delivery to Camp Lejeune, North Carolina, with a required delivery date of July 27, 2026. The item, identified by NSN 4520-00-976-2253 and part number 121732, is supplied by SUNTEC INDUSTRIES INC of Rockford, IL, and must be delivered in one unit with zero variance in quantity. Delivery is FOB origin within ten days of the contract award, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 but is fully subordinate to the DLA Master List of Technical and Quality Requirements, and all markings and labeling must adhere to MIL-STD-129 with palletization following RP001 DLA Packaging Requirements. The shipment is designated as RDD(3-POS RDD)/NMCS and must be transported via fast, traceable means—parcel post is prohibited. The freight shipping address is M21310, Bldg 1012, O Street Bay #8, Camp Lejeune, NC, with a designated TCN for tracking. The contract prohibits removal of government identification from non-accepted supplies and applies Covered Defense Information requirements. The point of contact is Alexis Selby at DLA, with further details available through DIBBS.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 15 hours ago

DEADLINE

BANDAGE, ELASTIC

Solicitation # SPE2DS-26-T-284F

The contract pertains to the procurement of elastic bandages identified by NSN 6510-01-162-1548, with a requested quantity of four units. The solicitation is issued under number SPE2DS-26-T-284F by the Defense Logistics Agency, a branch of the Department of Defense, and was posted on July 29, 2026. Responses are due by August 4, 2026, and the procurement is categorized as a federal solicitation with no specified set-aside designation. The item will be delivered to a performance location within the United States, though no specific city or state is provided. The procurement is managed through the DIBBS system, and no point of contact information is listed in the provided data.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

TRICON, FREIGHT, SPEC

Solicitation # SPE8ED-26-Q-0603

The contract pertains to the procurement of TRICON, FREIGHT, SPEC with the NSN 8150-01-533-8673, under Purchase Request 7017400576 for a quantity of 40 units. It is issued as a solicitation by the Defense Logistics Agency under the Department of Defense, with solicitation number SPE8ED-26-Q-0603. The solicitation was posted on July 29, 2026, and responses are due by August 5, 2026, providing potential vendors a one-week window to submit proposals. The contract does not specify a set-aside type or NAICS code, and no geographic point of performance or contact information is provided in the data. All activity is managed through the DIBBS platform, with the official solicitation page accessible via the provided link.

POSTED

about 15 hours ago

DEADLINE

DRESSING, OCCLUSIVE, ADH

Solicitation # SPE2DS-26-T-284U

The contract solicitation is for an occlusive adhesive dressing identified by NSN 6510-01-234-8943, with a single-unit purchase request numbered 7017660495. The solicitation, issued under number SPE2DS-26-T-284U by the Defense Logistics Agency under the Department of Defense, was posted on July 29, 2026, and requires responses no later than August 4, 2026. The procurement is classified as a federal solicitation with no specified set-aside type or NAICS code, indicating it is open to general federal contractors. The place of performance and point of contact details are not provided, but the solicitation can be reviewed through the official DIBBS portal using the provided UI link.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

LIGHT SPECIAL PURPO

Solicitation # SPE8E7-26-Q-0270

The contract specifies the procurement of item 6220-01-549-4174, identified as LIGHT SPECIAL PURPO, with a total quantity of 110 units distributed across eight line items ranging from 2 to 29 units each. All deliveries must comply with a strict zero percent variance in quantity and are subject to inspection and acceptance at the destination point. Delivery is required within 30 days after order date, with free on board terms originating from the supplier’s location. Packaging must adhere to MIL-STD-2073-1E standards with specific preservation methods, unit containers, and packing levels, while marking must fully comply with MIL-STD-129 without any special labeling. Palletization must conform to DLA Packaging Requirements for Procurement (RP001), and hazardous material handling is governed by IP025, which mandates packaging per FED-STD-313 and TQ requirement IP025 if deemed hazardous; otherwise, commercial packaging under ASTM D3951 is acceptable, with all DLA Master List requirements taking precedence. The supplies are destined for multiple U.S. military and foreign military locations, including Royal Jordanian Air Force and U.S. Army bases in Hawaii and Jordan, with freight and marking instructions tied to specific TCN and RDD identifiers. The contract is issued under solicitation SPE8E7-26-Q-0270 by the Defense Logistics Agency, referencing the DLA Master List of Technical and Quality Requirements for all technical and quality specifications.

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8ES-26-Q-0090

This procurement under solicitation SPE8ES-26-Q-0090 is for enamel designated by NSN 8010-00-286-7749 in quantities of four and two containers, each containing five gallons, for delivery to Diego Garcia and other government locations. The contract requires strict compliance with Department of Defense packaging, marking, and shipping standards including MIL-STD-2073-1E and MIL-STD-129, with special handling for Type II shelf-life items that must retain at least 85% of their 24-month shelf life upon receipt. The product must originate from manufacturers approved on both the Qualified Products List and the Approved Products List maintained by the Performance Review Institute and Master Painters Institute respectively, and must conform to MPI #9 Revision D dated 05/01/2014. Hazardous material shipping requirements are governed by OSHA’s revised Hazard Communication Standard, mandating submission of Safety Data Sheets and compliant labels prior to award, along with employee training on the Globally Harmonized System. This acquisition is conducted under simplified procedures authorized by 41 U.S.C. 1901 and Class Deviation 2026-O0028, with firm fixed pricing and zero tolerance for quantity variance. Delivery is required within 60 days after issuance of the order, with inspection and acceptance occurring at origin. The item is subject to Controlled Unclassified Information (CUI) requirements, and if Covered Defense Information or export-controlled technical data is involved, the contractor must comply with DFARS clauses 252.204-7012, 252.204-7019, and 252.204-7020. Noncompliance with CUI, shelf-life, packaging, or approval list requirements may lead to cancellation of purchase orders. All markings must reflect special code 33 for Type II shelf life and adhere to MIL-STD-129, with freight addressed to FPO AP 96595-0004 and specific shipping instructions governed by DLAD procedural notes.

Paint and Coating Manufacturing

POSTED

about 15 hours ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3922

This contract issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-3922 specifies the procurement of two units of a marker and identifier with NSN 7690998418549 and part number 187-5558, priced at $0.00 per unit for a total of $0.00, with delivery required within five days of award. The item must be delivered FOB origin and inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and palletization adhering to DLA’s Packaging Requirements for Procurement, which supersede any conflicting standards. The DLA Master List of Technical and Quality Requirements governs all technical specifications, and all supplies must be marked and labeled according to government standards, with government identification removed from non-accepted items. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point in Sioux City, Iowa, with the same address used for marking and freight. The contract references specific DLA directives including RP001 and RD003, and includes a provision for covered defense information. The required delivery date is July 24, 2026, with a solicitation response deadline of August 10, 2026, and the contract is classified under NAICS code 323111 for federal procurement.

Commercial Printing (except Screen and Books)

POSTED

about 15 hours ago

DEADLINE

SUCTION UNIT, AIRWAY KI

Solicitation # SPE2DS-26-T-284B

The contract solicitation is for a Suction Unit, Airway KI with NSN 6515-01-364-1047, under purchase request 7017673928 for a quantity of two units. It is issued by the Defense Logistics Agency under the Department of Defense through solicitation number SPE2DS-26-T-284B, with the posting date of July 29, 2026, and a response deadline of August 4, 2026. The solicitation is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not specified, though the country code is listed as the United States. Interested parties can access the full solicitation through the DIBBS portal using the provided UI link.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

FILTER-DRIER, REFRIGERA

Solicitation # SPE8E8-26-T-4910

The contract specifies the procurement of a Filter-Drier for Refrigerant, identified by NSN 4130-01-367-5748 and part number BFK-083S from Emerson Electric Co ALCO Controls, with a quantity of four units to be delivered within 20 days of contract award. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any other standards. Packaging and palletization must adhere to DLA’s RP001 requirements, and parcel post is strictly prohibited—shipment must be via traceable means. The delivery address is NAVFACSYSCOM MID-ATLANTIC in Norfolk, VA, with specific building and contact details provided for freight shipments. The required delivery date is July 27, 2026, and the contract is governed under solicitation SPE8E8-26-T-4910, which incorporates mandatory technical and quality specifications referenced through R and I numbers from the DLA Master List. The contract is issued under the DoD unit of issue system and is subject to Covered Defense Information protocols. The point of contact is Alexis Selby of the Defense Logistics Agency, and the solicitation is classified under NAICS code 333415 for industrial machinery manufacturing.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE