This Government Contract opportunity from North Carolina was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Roofing Specialty Subcontractor (Metal Flashing & Edge Systems)

Closed

State & Local

Submission Closed09/02/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

Red Rock Job Corps Back Up Generator Install

Solicitation # red-rock-job-corps-back-generator-install

The Red Rock Job Corps Back Up Generator Install is a small business set-aside solicitation for the removal of an end-of-life 500 kW/625 kVA generator and the installation of a new 500 kW, 480V, 3-phase indoor generator in a NEMA 1 enclosure. The project allows for either diesel or propane units, provided that propane installations do not exceed a cost of 150,000 dollars. The contractor is responsible for providing a battery, charger, starter, muffler, main breaker, and a fuel tank capable of supporting a 48-hour runtime. To optimize costs, the existing 1000A ATS and compatible wiring and conduit are to be reused. The scope of work includes all grounding, startup, testing, and commissioning to ensure compliance with NEC, NFPA, manufacturer, and local codes. A one-year parts and labor warranty is required upon completion. Bidders must be active and registered in SAM.gov and are required to separate labor and materials on their bids. Additionally, the contract is subject to Davis-Bacon wage standards, necessitating the submission of certified payroll. The performance location for this project is in Pennsylvania.

POSTED

DEADLINE

SEMI-ANNUAL OVERHEAD DOOR MAINTENANCE FOR THE SDMO REGION, EO 14398

Western Area Power Administration

POSTED

DEADLINE

Install 200K Elevated Water TankThe Department of Justice, specifically the Federal Prison System / Bureau of Prisons, has issued a forecast for the installation of a 200K elevated water tank. This project is categorized under NAICS code 238290 and is scheduled to be performed in Anthony, Texas. The opportunity was posted on August 10, 2026. Interested parties may coordinate with Kevin Slone as the primary point of contact or David Orrantia for small business specific inquiries. Further details regarding this contracting opportunity can be found through the Department of Justice forecast portal.

Federal Prison System / Bureau Of Prisons

POSTED

DEADLINE

Western Area Power Administration (WAPA) Rocky Mountain Region (RMR) has a requirement for a project titled Loveland Field Maintenance Building Door to remove and dispose of existing doors, frames, g…

Western Area Power Administration

POSTED

DEADLINE

POSTED

DEADLINE

Cooling Tower Mechanical Maintenance and RepairThis subcontract for Cooling Tower Mechanical Maintenance and Repair involves providing scheduled and corrective mechanical services for cooling tower systems at County of Orange Sheriff-Coroner facility projects. The scope of work includes cleaning and disinfecting basins and fill media, as well as servicing motors, fans, gearboxes, VFDs, and distribution nozzles. Additionally, the contractor is responsible for seasonal start-up, shut-down, and winterization procedures to ensure operational systems and the delivery of detailed work order reports. Qualified bidders must hold a valid California State Contractor’s License and ensure all work adheres to CTI standards. The solicitation was posted on October 16, 2026, with a response deadline of December 16, 2026. This opportunity falls under NAICS code 238290 and is intended for prime contractors operating within the California Sheriff-Coroner agency framework.

POSTED

DEADLINE

MEP Support ServicesThis subcontract opportunity for MEP Support Services involves performing mechanical, electrical, and plumbing component work for prime contractors on Los Angeles Unified School District facility projects. The scope of work specifically includes the installation or modification of HVAC curbs, conduits, and vents associated with roofing activities, with the final deliverable being the completed installation of these MEP components within the Los Angeles-Long Beach-Santa Ana area. Eligible bidders must hold a valid CSLB license in one of several specified categories, including A, B, C-4, C-7, C-10, C-16, C-20, C-34, C-36, C-38, C-42, C-43, or C-46. The solicitation was posted on October 16, 2026, and requires a response by the deadline of November 18, 2026.

Los Angeles Unified School District

POSTED

DEADLINE

Industrial Control Panel & PLC FabricatorThis subcontract opportunity is for an Industrial Control Panel and PLC Fabricator to support prime contractors on water resource recovery facility projects for the Region of Peel. The selected provider will be responsible for supplying electrical enclosures and hardware, fabricating Starter/VFD enclosures, and assembling skid-mounted control panels equipped with PLCs and remote I/O. All deliverables must be fully wired, tested, and compliant with NEMA ICS-1-1096-60, FCC Part 15 Class A, IEEE-519, and ANSI C37-90 standards. The solicitation was posted on October 16, 2026, with a response deadline of November 11, 2026. Falling under NAICS code 238290, this contract focuses on specialized electrical fabrication and assembly to ensure the operational integrity of critical water infrastructure.

POSTED

DEADLINE

Request for Qualifications - Task Order Construction Agreement - Elevator Repairs

Solicitation # 2627-03

California State University, Fresno, acting through the Board of Trustees of the California State University, is seeking Statements of Qualifications from general contractors holding a C-11 license for a three-year Task Order-Construction Agreement for Multiple Projects Master Enabling Agreement. The contract covers design, preconstruction, construction management, and construction services for a portfolio of elevator repair projects across campus, including McLane Hall, the Music Building, Valley Children’s Stadium, and the Grosse Industrial Tech Building. The total budget for all projects is not to exceed 3,000,000 dollars, with a maximum cap of 400,000 dollars per individual project. The delivery methods include Design-Build, Collaborative Design-Build, and Construction Manager at Risk, utilizing a two-phase approach where design and preconstruction task orders precede individual construction agreements based on Lump Sum or Guaranteed Maximum Price proposals. The selection process is a two-step method consisting of an initial RFQ to shortlist the four highest-scoring firms, followed by an RFP stage involving interviews and proposal scoring. To be considered responsive, respondents must be prequalified with the Trustees with a rating of at least 3,000,000 dollars one day prior to the submission deadline of November 24, 2026. Mandatory requirements include registration with the Department of Industrial Relations, adherence to prevailing wage laws, and the submission of a signed Skilled and Trained Workforce Agreement. Additionally, the contract mandates a minimum of 3 percent subcontracting to Disabled Veteran Business Enterprises. Evaluation criteria include the firm's composite safety score, CAL-OSHA history over the past five years, and experience utilizing DVBEs.

POSTED

DEADLINE

Elevator Maintenance and Warranty SupportThis subcontract for Elevator Maintenance and Warranty Support provides essential maintenance and emergency response services for prime contractors working on San Diego Unified School District facility projects. The scope of work focuses on correcting leakage, loss of synchronization, and abnormal noise to ensure full operational uptime throughout a 12-month warranty period. To maintain system reliability, the contractor must provide call-back services during both standard and overtime hours and deliver documented service responses. Eligible providers must hold a valid California C-11 License to perform the work in San Diego. The contract is categorized under NAICS code 238290, with a response deadline set for October 22, 2026. The primary objective is to guarantee continuous elevator functionality and professional technical support for the duration of the warranty term.

SAN DIEGO UNIFIED SCHOOL DISTRICT

POSTED

DEADLINE

Elevator Hydraulic Jack Installation and CommissioningThis subcontract for the San Diego Unified School District involves the removal and installation of hydraulic jacks for elevator systems on various facility projects. The selected contractor will be responsible for removing failed jacks, installing new assemblies plumb and parallel, cleaning hydraulic systems, and ensuring synchronization according to EECO requirements. The scope of work concludes with the delivery of a fully operational system, verified through operational pressure load acceptance and empty-car load tests. Eligible bidders must hold a valid California C-11 License to perform these specialized services. The project is located in San Diego, California, under NAICS code 238290. Interested parties must submit their responses by the deadline of October 22, 2026.

SAN DIEGO UNIFIED SCHOOL DISTRICT

POSTED

DEADLINE

Replace Elevator Jacks At Point Loma High School

Solicitation # PC27-0449-33-00-00

The San Diego Unified School District is soliciting informal bids for solicitation number PC27-0449-33-00-00 to replace failed hydraulic elevator jacks at Point Loma High School Building 800. The project has an estimated value of 55,000 dollars, which includes a 5,000 dollar lump sum allowance for billable hours and unforeseen conditions. The scope of work requires the installation of new OEM replacement jacks in accordance with specifications prepared by HKA Elevator Consulting and includes a 12-month warranty service following construction. Final acceptance is contingent upon the jack assemblies operating properly throughout full travel, remaining synchronized, and being free of leakage. Eligible bidders must possess a C-11 California State Contractors License, be prequalified with the District, and be registered with the DIR. A mandatory site visit was scheduled for October 14, 2026, with a bid submission deadline of October 22, 2026, via PlanetBids. Responsive bids must include a 10 percent bid security bond or cashier's check, a completed Non-Collusion Declaration, and a subcontractors list for any entity performing more than 0.5 percent of the total bid value. The successful contractor will be required to provide performance and payment bonds, insurance certificates for general liability, auto liability, and workers' compensation, and a Drug-Free Workplace Certification. All work must adhere to prevailing wage determination 2026-2.

SAN DIEGO UNIFIED SCHOOL DISTRICT

POSTED

2 days ago

DEADLINE

in 4 days

AI Contract Overview

This subcontract opportunity with the UNC System Office Design/Construction involves the fabrication and installation of custom metal flashings, coping, and edge systems. The primary objective is to secure roof perimeters and penetrations to ensure full weatherproofing and adherence to all applicable building codes. The project is categorized under NAICS code 238290 and was posted on August 11, 2026. Interested parties must submit their responses by the deadline of September 2, 2026, at 7:00 PM.

General Info

UNC System Office subcontract for custom metal flashing and roofing installation by September 2.

Agency

North Carolina → Unc - System Office Design/construction

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 287-30724-PQB.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NC State University

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 11

subcontract

Response DeadlineSep 2

Deadline has passed

Submission Closed

09/02/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNorth Carolina → Unc - System Office Design/construction

ContactsNo contacts available

OfficeN/A

Organization / AgencyNorth Carolina → Unc - System Office Design/construction

Office AddressN/A

ContactsNo contact information available

Full Description

Fabrication and installation of custom metal flashings, coping, and edge systems for roof perimeters and penetrations to ensure weatherproofing and code compliance.