Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Roofing System Installation

Active

State & Local

Response Deadline07/30/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Roofing System Installation seeks a subcontractor to install a comprehensive membrane roofing system on low-slope commercial rooftops, including all necessary insulation, flashings, and associated components to ensure long-term waterproofing and structural integrity. The work is mandated for Dallas Area Rapid Transit in Texas and falls under NAICS code 238160, which classifies it as roofing contractor services. All materials and labor must comply with industry standards for durability, weather resistance, and energy efficiency, with strict adherence to site-specific conditions and safety protocols. The solicitation was posted on July 16, 2026, with a firm response deadline of July 30, 2026. While no set-aside provisions or organizational type restrictions are specified, the opportunity is structured as a subcontract, indicating the prime contractor is managing the broader project and seeking qualified partners to execute the roofing scope. Performance of the work is expected to take place at DART facilities across Texas, though exact locations are not listed. Interested parties must submit their proposals through the provided BonfireHub portal before the deadline to be considered.

General Info

Install membrane roofing system on DART commercial rooftops in Texas by July 30, 2026, per industry standards.

Agency

Texas → Dallas Area Rapid TransitView Agency

NAICS

238160 - Roofing ContractorsView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 07:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Dallas Area Rapid Transit

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of membrane roofing, insulation, flashings, and related components on low-slope commercial roofs.

Similar Contracts

Same NAICS industry code

Fishermen's Terminal C-15 Building ImprovementThe Port of Seattle through its Waterfront Project Management office is preparing to undertake significant improvements to Building C-15 at Fishermen’s Terminal, focusing on structural and architectural upgrades to extend the building’s service life and enhance safety and functionality. Key components of the work include full replacement of the existing roof gutters, repair or replacement of select rooftop vents, installation of 151 new windows, renewal of exterior cladding, and structural repairs to the building’s tower. The project is classified under NAICS code 238160, indicating it falls within the roof installation contractor category, and is intended to address long-term deterioration and ensure the building meets modern standards. The opportunity is currently listed as a forecast with no solicitation number yet assigned, suggesting a future procurement process will be launched. All work will be performed at Fishermen’s Terminal with no specified place of performance beyond the site. Valarie Jarvi serves as the primary point of contact for inquiries, reachable via phone or email, while Rod Jackson is designated as the project manager overseeing execution. The forecast was posted on July 18, 2026, and interested parties can access additional information through the Port of Seattle’s SOPs portal. No set-asides or specific contracting preferences are indicated, and the procurement is open to qualified contractors without geographic or size-based restrictions noted. Potential bidders should prepare for a competitive process centered on technical expertise in commercial building envelope systems and structural remediation.

Waterfront Project Management

POSTED

about 1 hour ago

DEADLINE

Terminal Envelope Upgrade - Roof Replacement Project (DBB)The Port of Seattle is forecasting a roof replacement project under the Terminal Envelope Upgrade initiative, targeting the demolition and replacement of approximately 13,600 square feet of roofing membrane and insulation, along with all associated flashing and roof drains. This work is classified under NAICS code 238160, indicating it falls under roofing contractors services, and will be executed through a design-bid-build delivery method. The project is managed by the Aviation Facilities & Infrastructure division, with Angela Peterson listed as the primary Point of Contact and John McWilliams serving as the Project Manager. All inquiries and communications should be directed to the provided phone numbers and email addresses. The solicitation was posted on July 18, 2026, and while no set-aside type has been designated, interested parties should refer to the official portal for full details and eventual bid opportunities.

Aviation Facilities & Infrastructure

POSTED

about 1 hour ago

DEADLINE

Pier 69 Third Floor Terrace RepairThe project involves the complete demolition of the existing roof system on the third floor east terrace at Pier 69, including removal of pavers, drainage mat, and waterproof membrane. It will be replaced with a new roof system featuring a pedestal-supported layout and thinner pavers designed to improve drainage efficiency. A critical component of the work is the construction and installation of a barrier wall to protect the structural steel beams beneath the terrace from future corrosion. All materials, including planters and debris, will be handled using a crane for safe and efficient removal and reinstallation. The work is part of a broader maintenance initiative by the Port of Seattle’s Waterfront Project Management team, with Todd Rehm listed as the primary point of contact and Samuel Hansen serving as the project manager. The solicitation is categorized under NAICS code 238160, indicating a focus on roofing contractors, and is currently in a forecast stage with a posted date of July 18, 2026.

Waterfront Project Management

POSTED

about 1 hour ago

DEADLINE

T91 Cruise Building A2 Roof ReplacementThe Port of Seattle through Waterfront Project Management has posted a forecast for a comprehensive roof replacement at Terminal 91 Building A2, with the solicitation scheduled for release in the future. The project falls under NAICS code 238160, indicating it is classified as a roofing contract, and is intended to replace the existing roof system across the entire structure to ensure structural integrity, weather protection, and compliance with current building standards. The work will require full removal of the current roofing materials and installation of a new, durable, and weather-resistant system appropriate for high-traffic maritime infrastructure. The primary point of contact for inquiries is Angela Peterson, who can be reached via email or phone, with Rod Jackson serving as the Project Manager for technical coordination. Although the exact timeline and solicitation details are not yet available, the posting date of July 18, 2026, signals the official notice to industry that this procurement is anticipated and that interested contractors should prepare for upcoming bid opportunities. The contract will be performed on-site at Terminal 91 Building A2, and responses to the formal solicitation will be required once it is officially issued. All interested parties are encouraged to monitor the provided UI link for updates and formal solicitation documents.

Waterfront Project Management

POSTED

about 1 hour ago

DEADLINE

RFP MPM-1263 Roofing Inspection, Installation, Maintenance, & ReplacementJames Madison University is seeking qualified contractors to provide comprehensive roofing services including inspection, installation, maintenance, and replacement across its campus facilities in Harrisonburg, Virginia. The contract is open to entities capable of delivering high-quality roofing solutions under a one-year initial term, with the possibility of four additional one-year renewals based on performance and need. Proposals must be submitted by the deadline of August 18, 2026, and will be evaluated based on the vendor’s ability to meet technical requirements, safety standards, and service reliability. This solicitation is intended for a cooperative agreement that may extend beyond JMU to serve other locations within Virginia. All communications regarding the RFP should be directed to Michael Patrick Morrison at the provided contact information.

James Madison University

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Roofing Installation (Shingle/Underlayment/Flashing)The contract entails the full installation of roofing components including underlayment, shingles, flashing, drip edge, and ventilation systems, all in strict compliance with manufacturer specifications and applicable building codes. The work is designated as a subcontract under NAICS code 238160 and is managed by the Community Development, Housing & Community Services Division in Florida, indicating a focus on public or community-based construction efforts. All materials and methods must meet high standards for durability, weather resistance, and structural integrity, ensuring long-term performance and code compliance. The solicitation was posted on July 17, 2026, with responses due by August 4, 2026, providing potential subcontractors approximately three weeks to prepare and submit proposals. While no specific location within Florida is detailed, the place of performance is implied to be within the jurisdiction of the contracting agency. The contract does not specify set-aside status or point of contact, leaving bidders to rely on the provided online portal link for additional details and submission guidelines.

Community Development, Housing & Community Services Division

POSTED

about 19 hours ago

DEADLINE

SHIP Program Enua Sanchez - Roof ReplacementThis contract, titled SHIP Program Enua Sanchez - Roof Replacement under solicitation number 2025-26-061, is a lump sum agreement issued by the City of Hialeah’s Community Development, Housing & Community Services Division to perform critical roof replacement work on a residential property eligible for the State Housing Initiatives Partnership (SHIP) Program. The project is part of a broader effort to ensure safe, code-compliant, and accessible housing for low-income homeowners, with the scope strictly limited to the specifications outlined in Exhibit C, requiring all work to be completed in a good, workmanlike manner and in full compliance with applicable federal, state, and local regulations. The contract specifies a guaranteed maximum price of $5, which is clearly a placeholder or template error, as it is not reflective of realistic market costs; all permit fees are included, and any change orders exceeding $25,000 in cumulative value require City Council approval. The work must be performed within 90 calendar days of the Notice to Proceed, with performance hours restricted to 8:00 a.m. to 4:00 p.m. and confined to the City of Hialeah. The contractor is required to provide payment and performance bonds equal to the contract sum within seven days of agreement execution, along with comprehensive insurance coverage including liability, workers’ compensation, builder’s risk, and coverage meeting Florida’s financial rating standards. Labor compliance includes adherence to prevailing wage requirements under the Davis-Bacon Act where applicable, and mandatory use of the E-Verify system for all employees and subcontractors, with affidavits verifying compliance retained for the agreement’s duration. The contractor is prohibited from using lead-based paint, covered telecommunications equipment, or materials not produced in the United States under Buy America requirements. All inspections for electrical, plumbing, mechanical, and roofing components must be scheduled by the contractor and verified before payment draws, with three progress payments allowed—25% and 50% completion milestones capped at 30% of the bid price each, and a final payment contingent upon final acceptance by both the City Project Manager and homeowner. Final acceptance requires submission of unconditional lien releases, warranty affidavits, manufacturer warranty assignments, operation manuals, and a signed certificate of final completion by the architect of record. Retainage of 5% is withheld until final completion, and the contractor must indemnify the City and homeowner against all claims arising from the work. Compliance with federal and state certifications regarding debarment, public entity

Community Development, Housing & Community Services Division

POSTED

about 19 hours ago

DEADLINE

USCG Wallops Housing Roof ReplacementThe contract calls for the complete removal of existing shingles and flashing and the installation of new roofing materials on three Coast Guard-owned duplex housing units located at USCG Family Housing in Wallops Island, Virginia. This work is specifically targeted at units 4, 5, and 6 and is being procured as a 100 percent small business set-aside under NAICS code 238160, with the small business size standard set at $19.0 million. The government plans to award a Firm-Fixed Price contract, and all quotes must be submitted via email no later than noon Eastern Time on July 30, 2026, to frank.r.burton@uscg.mil, with the SF1442 form fully completed from blocks 14 through 20c including the UEI. Potential bidders are required to verify site conditions in person prior to quoting, and a mandatory site visit is scheduled for July 22, 2026, at 10:00 AM Eastern Time; interested parties must coordinate attendance with Frank Burton and CWO Ruben Santellanes and provide their full name, date of birth, and REAL ID Driver’s License number for access clearance. All questions regarding the solicitation must be submitted in writing no later than 10:00 AM Eastern Time on July 24, 2026. The solicitation number is 70Z02726RFQ000122, and the contracting office is based in Portsmouth, Virginia under the Department of Homeland Security.

Base PORTSMOUTH(00027)

POSTED

about 20 hours ago

DEADLINE

56--LYJO RE-ROOF HISTORIC STRUCTURESThe contract pertains to the reroofing and structural repairs of historic barns and outbuildings within the Lyndon B. Johnson National Historic Park in Johnson City, Texas, specifically targeting the Boyhood Home Unit and the Johnson Settlement site. Work includes the removal and replacement of wood shingles with synthetic shake/shingle roofing on the Bruckner Barn, Stubbs Cooler House, Boyhood Home Barn and Smokehouse, along with structural repairs to wood joists and purlins. Lightning protection systems will be restored on the Bruckner Barn, Polk Barn, and Stubbs Cooler House, while a new system will be installed on the Smokehouse. Two optional bid items are available: reroofing the Settlement Cabin and installing lightning protection on its roof. The project is located in Blanco County and is governed by the General Wage Rate Decision for Texas, with construction classified as building. All work must be completed within 280 days of notice to proceed, with a firm fixed price contract structure and a performance period from August 31, 2026, to June 7, 2027. Interested contractors must be registered in SAM and complete required representations and certifications prior to submission. Proposals must be submitted electronically via email to the contracting officer and cannot be mailed. The solicitation is a total small business set-aside under NAICS code 238160, and all responses are due by August 3, 2026, at 12:00 p.m. CST. A mandatory site visit is scheduled for July 15, 2026, and attendance requires RSVP by July 14, 2026. Questions regarding the solicitation must be submitted no later than July 22, 2026. The contract is managed by the National Park Service under the Department of the Interior, with primary point of contact for inquiries being Ruth Pagan. Failure to comply with submission guidelines, registration requirements, or deadlines will disqualify responses.

Nps Conops Strategic DOI

POSTED

about 20 hours ago

DEADLINE

ROOF REPLACEMENT ELKO, NV

Department Of Commerce Noaa

POSTED

about 20 hours ago

DEADLINE

CES - Repair Roof B37

W7N9 Uspfo Activity Wyang 153

POSTED

about 20 hours ago

DEADLINE

Replace waterproofing at American Center building roofThe U.S. Embassy in New Delhi is soliciting quotations to replace the waterproofing on the roof of the American Center building located at 24 Kasturba Gandhi Marg, Connaught Place, New Delhi. Interested parties must submit their responses electronically to Newdelhibids@state.gov with the specified subject line by 5 p.m. India Time on July 30, 2026; submissions exceeding 10 MB must be split into multiple emails, each under the limit. Quotations must be in English and include completed Sections B, K, and L of the solicitation document, along with proof of active registration in the System for Award Management (SAM) database. A mandatory site visit is scheduled for July 23, 2026, at 11 a.m., and interested parties must express their intent to attend by sending an email to ChellaramaniA@state.gov no later than July 21, 2026. All questions regarding the solicitation must also be submitted in writing to the same email address by that deadline, and no clarifications will be addressed after this cutoff. The award will be made to the responsible offeror submitting the lowest-priced acceptable quotation, with no guaranteed discussions unless necessary. Failure to comply with submission guidelines, including sending materials to incorrect email addresses or submitting incomplete documentation, will result in rejection. Contractors not registered in SAM prior to award must complete registration within 30 days of award or three days before submitting the first invoice, whichever comes first, and are strongly advised to initiate registration immediately.

US Embassy New Delhi

POSTED

about 20 hours ago

DEADLINE

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

Fire Protection and Sprinkler SystemsThe contract pertains to the design, fabrication, and installation of fire sprinkler systems for Dallas Area Rapid Transit, encompassing all essential components such as piping, sprinkler heads, and alarm mechanisms. It is classified as a subcontract under NAICS code 238240, which corresponds to fire protection system installation services, and is open for response until July 30, 2026, with the solicitation posted on July 16, 2026. The work is intended to support transit infrastructure in Texas, though specific location details and point of contact information are not provided. The opportunity does not specify a set-aside classification, indicating it is open to all qualified subcontractors regardless of size or status. All performance and delivery expectations must align with industry standards for fire protection systems, and bidders are expected to possess the technical capability and experience to meet contractual requirements without additional agency guidance.

POSTED

DEADLINE

HVAC Equipment and DuctworkThe contract pertains to the installation of heating, ventilation, and air conditioning systems including chillers, ductwork, and associated controls for Dallas Area Rapid Transit in Texas. It is classified as a subcontract under NAICS code 238220, which covers HVAC installation services. The opportunity was posted on July 16, 2026, with responses due by July 30, 2026, indicating a short window for interested parties to submit proposals. The place of performance and agency office details are not specified in the provided data, but the work is tied to DART operations in Texas. No set-aside classification or organizational type is indicated, suggesting the subcontract is open to general contractors without specific eligibility requirements based on business size or ownership. The solicitation is accessible online via a public portal, though no point of contact information is listed.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Excavation and Site GradingThe contract titled Excavation and Site Grading pertains to earthwork activities necessary for preparing the building footprint and utility corridors, encompassing excavation, backfill, compaction, and grading. These tasks are critical to ensure proper site preparation for subsequent construction phases, with an emphasis on meeting engineering and safety standards for both structural foundations and underground utility installations. The work falls under NAICS code 237990, classifying it as Other Heavy and Civil Engineering Construction, and is structured as a subcontract opportunity under Dallas Area Rapid Transit in Texas. The solicitation was posted on July 16, 2026, with a response deadline of July 30, 2026, indicating a two-week window for interested parties to submit proposals. Although specific location details such as city, state, and zip code are not provided, the place of performance is designated within Texas under the jurisdiction of Dallas Area Rapid Transit. The contract does not specify a set-aside type or organizational constraints, making it open to qualified subcontractors regardless of business size or ownership characteristics. All submissions must be made through the provided BonfireHub portal link, and no point of contact information is listed, suggesting inquiries should be directed via the online platform.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Structural Steel ErectionThe contract involves the delivery, assembly, and bolting or welding of a structural steel framework to support the superstructure of a building, specifically for a project under Dallas Area Rapid Transit in Texas. Work must be completed in compliance with industry standards for structural integrity and safety, with all materials and components delivered to site and installed according to engineered specifications. The scope includes all necessary labor, equipment, and coordination required to erect the steel framework as part of the larger construction effort, ensuring alignment with architectural and engineering plans. Submission of proposals is due by July 30, 2026, with the opportunity posted on July 16, 2026, under NAICS code 238120 for structural steel erection services. This is a subcontract opportunity, meaning the winning vendor will be working under a prime contractor or managing entity rather than directly with the agency. The place of performance is within Texas, though no specific city or address is provided, and interested parties must access the full solicitation details through the official portal at the provided link. There is no set-aside designation indicated, so all eligible contractors may compete regardless of business size or ownership characteristics.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Concrete Formwork and PlacementThe contract entails the full scope of concrete formwork and placement services for structural elements including foundations, slabs, and walls, requiring precision in forming, reinforcing, pouring, and finishing to meet engineering specifications. It is designated as a subcontract under NAICS code 238110 and is being managed by Dallas Area Rapid Transit in Texas, with the solicitation posted on July 16, 2026, and responses due by July 30, 2026. The work must comply with all applicable construction standards and timelines, and bidders are expected to handle all materials, labor, equipment, and safety protocols necessary to complete the concrete work to the required quality and schedule. There is no set-aside designation specified, and performance will occur at an unspecified location within Texas under the oversight of the transit authority.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Plumbing and Piping SystemsThe contract involves the installation of potable water, sanitary waste, and vent piping systems along with associated fixtures and gas piping for a project managed by Dallas Area Rapid Transit in Texas. The work falls under NAICS code 238220, indicating it is a plumbing subcontract requiring specialized skills in system design and installation compliant with local and federal standards. The solicitation was posted on July 16, 2026, with responses due by July 30, 2026, and the opportunity is available exclusively as a subcontract without any set-aside classification. Performance location details are not specified, but work is expected to occur within the agency's operational area. Bidders must be prepared to meet all technical and regulatory requirements for plumbing and gas systems, ensuring safety, functionality, and code adherence.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and WiringThe contract is for the installation of electrical systems in a commercial construction project under a subcontract arrangement, with the work encompassing wiring, conduits, electrical panels, and lighting fixtures. The North American Industry Classification System code 238210 identifies this as electrical contracting work, and the contract is solicited by Dallas Area Rapid Transit, with the performing location in Texas. The opportunity was posted on July 16, 2026, and responses are due by July 30, 2026. No set-aside status or additional organizational details are specified. The full solicitation can be accessed via the provided online link.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

LRV Journal Axle Bearings Removal and InstallationDallas Area Rapid Transit is soliciting proposals for the removal and installation of journal axle bearings on Light Rail Vehicles, with the solicitation numbered 2096569 and posted on July 16, 2026. The response deadline is July 30, 2026, at 7:00 PM, and all work is to be performed in Texas. The contract is open to qualified vendors with no specific set-aside designation noted, and the work must comply with industry standards for rail vehicle maintenance and safety. Primary contact for inquiries is Justin Norman, reachable at jnorman1@dart.org. Proposals must be submitted through the designated online portal at the provided UI link, and bidders are expected to demonstrate experience in railcar mechanical systems, access to appropriate tooling, and adherence to operational timelines without disrupting service.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Commercial Parts Logistics and Delivery ServicesThe contract titled Commercial Parts Logistics and Delivery Services outlines the secure packaging, labeling, and transportation of precision mechanical components to a designated destination, with the contractor assuming full responsibility for the integrity and safety of the goods until formal acceptance by the recipient. Risk of loss or damage remains with the contractor throughout transit and until the recipient confirms receipt and conformity to specifications, ensuring accountability at every stage of the delivery process. The work is governed under NAICS code 484220, indicating a focus on truck transportation of dry bulk freight, and is structured as a subcontract under the jurisdiction of Dallas Area Rapid Transit in Texas. The opportunity was posted on July 16, 2026, with a response deadline of July 21, 2026, providing a limited window for qualified vendors to submit proposals. No solicitation number has been assigned, and there is no set-aside classification indicated. The place of performance and point of contact details are not specified within the provided data, suggesting that further clarification may be required through the provided link to the Bonfire Hub platform. The contract emphasizes reliability, precision handling, and clear liability boundaries, aligning with the critical nature of the components involved and the operational requirements of a public transit authority.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Minority- and Women-Owned Business Outreach and Participation CoordinationThe contract seeks a contractor to provide coordination and administrative support aimed at increasing the involvement of minority-, women-, and disabled-owned business enterprises in the supply chain for Dallas Area Rapid Transit. The role focuses on actively promoting participation, tracking vendor engagement, and ensuring thorough documentation that aligns with federal and state equal opportunity requirements. This includes outreach efforts to identify and connect qualified DBE/MBE/WBE vendors with contracting opportunities, facilitating their inclusion in procurement processes, and maintaining compliance records to demonstrate adherence to affirmative action goals. The position is structured as a subcontract under the NAICS code 541611 for management consulting services and is posted with a response deadline of July 21, 2026. The work is expected to be performed in support of DART’s operations in Texas, with no specific performance location designated. While no set-aside classification is provided, the contract emphasizes equitable representation and inclusive economic development as core objectives. Bidders must be prepared to demonstrate experience in vendor outreach, data collection, compliance reporting, and a deep understanding of government contracting diversity standards to effectively execute the responsibilities outlined in this solicitation.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Quality Inspection and Conformance Testing ServicesDallas Area Rapid Transit is seeking qualified vendors to provide independent inspection, testing, and certification services for mechanical components to ensure full compliance with established technical drawings and procurement specifications. The contract, titled Quality Inspection and Conformance Testing Services, is classified as a subcontract under NAICS code 541380 and is open for responses through July 21, 2026. The work requires rigorous verification processes to validate that all mechanical parts meet exacting engineering standards and performance requirements, with a focus on accuracy, traceability, and documented conformance. The place of performance and point of contact details are not specified, but the services are expected to support DART’s infrastructure and transit system maintenance objectives. Interested parties must submit their proposals by the stated deadline to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Machined Bearing Components SupplyThe contract entails the manufacture and supply of precision-engineered bearing cup and cone assemblies specifically designed for front axle systems, requiring strict adherence to detailed technical specifications and compliance with OEM part number requirements. These components must meet high standards of dimensional accuracy, material integrity, and performance durability to ensure safe and reliable operation in commercial transit applications. The work is being procured as a subcontract under the NAICS code 332996, indicating it falls within the category of other fabricated metal product manufacturing, and is being managed by Dallas Area Rapid Transit in Texas. Responses to this solicitation are due by July 21, 2026, with the opportunity posted on July 16, 2026. All submissions must align with the technical and quality expectations outlined by the agency, and production must be capable of consistent delivery to support fleet maintenance and axle assembly needs. While specific delivery timelines, volume requirements, or inspection protocols are not detailed here, successful bidders will be expected to demonstrate proven experience in producing similar precision components and to maintain rigorous quality control throughout the manufacturing process. The place of performance and point of contact information are not provided, suggesting further details may be available through the official posting link.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE