Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ROPE, WIRE

Active
SPE4A5-26-T-312EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 7/16 inch diameter, right regular lay, improved plow steel, galvanized wire rope with an IWRC core, delivered in four reels of 1,300 feet each as a single continuous length per reel. The material must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific requirements for packaging, labeling, and inspection outlined in RP001, RQ011, RQ017, and MIL-STD-2073-1E. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, with limited exceptions for specific functional uses certified by NAVSEA. Unit identification and tracking are not required per the service customer’s request, and the item has no shelf life. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the full quantity must be delivered within 164 days of contract award. Packaging, marking, and palletization must comply with MIL-STD-129 and DLA packaging guidelines, with no special marking required. The delivery address is W1A8 DLA Dist San Joaquin in Tracy, CA, with a required ship date of January 17, 2027, and the contract reference is SPE4A5-26-T-312E under NSN 4010-01-096-7420.

General Info

7/16 inch galvanized wire rope, four 1,300-foot reels, FOB origin, delivery by January 17, 2027, no mercury, compliant with MIL-STD and DLA standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-312E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROPE,WIRE
ROPE, WIRE
IMPROVED PLOW STEEL, GALVANIZED
7/16 INCH DIAMETER
RIGHT REGUALR LAY, PERFORMED, IWRC
1300FT/REEL IN ONE CONTINUOUS LENGTH
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
SPE4A5-26-T-312E
SECTION B
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev A Gen 1 IAW BASIC UNK RR-W-410J(1) REVISION NR J DTD 01/03/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017572438 0001 RL 4.000
NSN/MATERIAL:4010010967420
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A5-26-T-312E
SECTION B
PR: 7017572438 PRLI: 0001 CONT’D
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/17/2027 Original Required Delivery Date:12/21/2026
SPE4A5-26-T-312E NSN/Part Number: 4010-01-096-7420 Quantity: 4 RL Purchase Request: 7017572438QTY: 4 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
O-RINGThis contract is for the procurement of an O-ring identified by NSN 5331-00-498-5755, supplied in a package of 100 units and governed by stringent military and commercial specifications. The item is classified as a commercial item of a type and must comply with MIL-DTL-25988/1B or its SAE AMS-R-25988B equivalent, with manufacturing required to adhere to the latest revision of the governing standard as of the solicitation date. It is designated as a critical application item with a non-extendable shelf life of 240 months and is subject to Type I ozone-depleting chemical prohibitions, requiring any substitute materials to be pre-approved unless explicitly authorized by the specification. Packaging must conform to MIL-STD-2073-1E, incorporating a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1 for UV protection, and marking must follow MIL-STD-129 with special shelf-life identification code 32. Packaging and palletization must meet DLA’s proprietary requirements, and no asbestos is permitted. Sampling and inspection protocols require adherence to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise stated in the contract. Verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Delivery is FOB origin with a 20-day lead time, no variance allowed in quantity, and acceptance occurs at destination. The item must be shipped via traceable freight—not parcel post—to the specified Tinker AFB address, with specific DLA packaging, marking, and unit of issue codes strictly enforced. Solicitation SPE7M4-26-T-290C is open to full and open competition, with technical and quality requirements sourced from the DLA Master List, and contractual obligations supersede any conflicting material specifications.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract specifies the procurement of a wire rope assembly with part number 582-7006 and NSN 4010-01-618-1374, for a quantity of eight units, under solicitation SPE4A5-26-T-311V. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances required under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and shipment must be transported by the fastest traceable means, excluding parcel post, to the specified vessel shipment address at Port Hueneme, California. The item is designated for U.S. Marine Corps Underwater Construction Team 2, with a required delivery date of July 17, 2026, and the contract is governed by federal procurement rules under NAICS code 332618, issued by the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADEDThe item is a grooved headed pin, identified by NSN 5315-01-650-1734, with a quantity of two units required under purchase request 7017204298. Delivery is mandated within ten days of award. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the United States, without prior government authorization. Access is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling defense export-controlled data, and have received formal approval from the DLA controlling authority. The solicitation, issued by the ASC Commodities Division of the Department of Defense, is identified by number SPE4A6-26-T-10AR, was posted on July 28, 2026, with responses due by August 5, 2026. The North American Industry Classification System code is 332618, and performance is to occur in Charlotte, North Carolina, with Michael Jefferson listed as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRICAnderson Metal Industries Inc is contracted to supply one unit of wire fabric with NSN 5335-01-451-0157 under contract SPE8E4-26-T-1934, with delivery required within 20 days to the USS NEW ORLEANS LPD 18 at FPO AP 96673. The product must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, with no special marking applied. Packaging must be palletized per DLA procurement guidelines and shipped FOB destination with zero tolerance for quantity variance. The contract strictly prohibits intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA; portable mercury-containing devices must have shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions. All deliveries must align with DLA transportation procedures C19 and C20, and the product must be furnished using the DoD authorized unit of issue as defined by the official DLA reference. The contract was posted on July 28, 2026, with responses due August 10, 2026, and performance is tied to the NAICS code 332618 under the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SINGThis contract specifies the procurement of a single-leg chain assembly with a 3/8 inch chain size, Grade C, Class 4, measuring 20 feet from bearing surface to bearing surface. One end features a slip hook, Type V, Class 1, while the other end has a grab hook, Type V, Class 2. The item is identified by NSN 4010-00-176-7938 and part number 70-8-74, and must be manufactured in accordance with referenced technical and quality requirements from the DLA Master List. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise stated. Attributes are to be verified at specified levels: VII for critical, IV for major, and II for minor, with default classifications applied where unspecified. The chain and fittings must meet the technical data outlined in SPE4A5-26-T-265F, and casting or forging may be necessary, requiring the vendor to request tooling assistance through DLA if government-provided tooling is unavailable. The contract requires delivery of 50 units FOB origin within 20 days of award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 labeling, using new and unused containers. Packaging and palletization must meet DLA’s RP001 requirements, with no special marking codes applied. Shipments must be sent by the fastest traceable means, excluding parcel post, and directed to the specified delivery point in Senatobia, Mississippi. The item has no shelf life requirement. The purchase request number is 7017112808, and the original required delivery date is June 8, 2026. The contract falls under NAICS 332618 and is managed by the Department of Defense’s ASC Supplier Operation OEM Division, with point of contact Hien-Van Trinh. All items must be sourced and delivered in full compliance with government procurement standards, including unit of issue alignment and logistical directives.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThe contract is for the procurement of 82 O-rings with NSN/Part Number 5331-01-165-1343, under solicitation SPE7L3-26-T-136T, with a response deadline of August 10, 2026, and delivery required within 136 days after award. The items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless superseded by an amendment. Packaging must meet DLA standards, and all supplies must be stripped of government identification if not accepted. The contractor is required to retain supply chain traceability documentation as mandated by DLA Procurement Note C03 from August 2016, ensuring full traceability through the supply chain. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitution requires prior approval unless already authorized by specification. Items must be completely free of asbestos, and any alternative materials must be formally approved under Clause L30 and Provision 4 conditions. The delivery location is Albany, Georgia, with Rajesh Sehgal designated as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCKThe contract pertains to the procurement of a single unit of a PIN and LOCK component identified by NSN 5315-01-619-5144, with a required delivery within 20 days of award. The solicitation, numbered SPE4A7-26-T-598T, was posted on July 28, 2026, and responses are due by August 5, 2026. It falls under NAICS code 332618 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging must comply with DLA specifications, and the item must be properly marked per physical identification standards. Government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. The place of performance is APO, zip code 96694, and the primary point of contact is Brad Ingram, reachable via email and phone. All submissions must be made through the DIBBS portal.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, HOLLOWThe contract pertains to the procurement of 100 units of PIN, HOLLOW with NSN 5315-01-553-7017 and part number 136843 from Cadillac Gage, CAGE code 10237, under solicitation SPE4A6-26-T-10CH. Delivery is required within five days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking aligned to MIL-STD-129 and no special marking required. Palletization must adhere to DLA packaging requirements. Quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating both tailored and non-tailored higher-level standards, including ISO 9001:2015 for manufacturers and non-manufacturers. Any configuration changes require an Engineering Change Proposal or formal variance request. The unit of issue is each, priced at $100.00 per unit with a total contract value of $10,000. The solicitation was posted on July 28, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThe contract pertains to the procurement of 109 O-rings identified by NSN 5331-01-250-6307, with a delivery requirement of 20 days after delivery order. The solicitation number is SPE7L1-26-T-884T, posted on July 28, 2026, with responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export controls under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048; disclosure to foreign persons, including U.S. subsidiaries and foreign nationals, is prohibited without prior authorization. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training and the DLA questionnaire, and receive formal approval to access controlled data. The contract falls under NAICS code 332618 and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact. Cybersecurity compliance requires certification by a CMMC Level 2 certified third-party assessment organization.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThis contract specifies the procurement of an O-RING under solicitation SPE7L1-26-T-884C, with a requirement for two units to be delivered within five days of award, FOB origin, to Fort Bragg, North Carolina. The item is identified by NSN 5331-01-471-6187 and purchase request 7017636760, with a unit price of $2.00 and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV deterioration, and marking must follow MIL-STD-129. Palletization adheres to DLA Packaging Requirements, and shipment must be traceable, excluding parcel post, using a RDD/ NMCS method. The supplier must provide and retain supply chain traceability documentation as outlined in DLA Directive C03 (August 2016), and government identification must be removed from non-accepted items. The contract strictly prohibits the use of ozone-depleting chemicals and intentional introduction of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specific instruments, weapon systems, or NAVSEA-approved chemical reagents. Any mercury-containing portable lamps or instruments must include a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements are referenced from the DLA Master List, and covered defense information provisions apply. The delivery is for a DLA Land Supply Chain procurement under the Department of Defense, with the point of contact being Kristina Derry, and the item falls under NAICS code 332618. The required delivery date is July 27, 2026, and the solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASEThe contract is for 627 units of a quick release pin with NSN 5315-01-386-0206 under solicitation SPE4A6-26-T-09YY, issued as a total small business set-aside with a NAICS code of 332618. The delivery is due within 202 days after order, and responses were due by August 5, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation issue date or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based approach unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, and access to technical data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. Physical identification and marking of the item per RQ017 is required, and government identification must be removed from rejected supplies per RQ011. Additionally, the contractor must be certified at CMMC Level 2 by a C3PAO to meet cybersecurity requirements. All performance and compliance obligations are tied to the designated place of performance in New Cumberland, PA, with Shaundrea Granderson listed as the primary point of contact for the DLA.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, HOLLOW
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332721
New
DIBBS
FUEL TANK VENTILATIThe contract is for the procurement of seven fuel tank ventilation kits identified by the NSN 4920-01-583-5563, categorized as a commercial off the shelf item with no shelf life requirement and determined not hazardous under the HMIC code review, eliminating the need for a Safety Data Sheet package. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies as per specified protocols. The item is covered under defense information security protocols, and the procurement is managed under a Total Small Business Set-Aside, with NAICS code 332721 assigned to the contract. The solicitation, issued by the Department of Defense’s ASC Supplier Oper OEM Division, was posted on July 28, 2026, with responses due by August 5, 2026, and delivery is required within 342 days after order. The point of contact for inquiries is Hien-Van Trinh, reachable via email and phone. The place of performance is listed as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002.
Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AIThe contract pertains to the procurement of a structural panel designated as PANEL, STRUCTURAL, AI, with NSN 1560-01-026-3876 and part number 50-7990-29S, under solicitation SPE4A5-26-T-312C. Three units are required to be delivered within five days of order placement, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. The product is classified as a critical application item and must adhere to stringent quality provisions including ISO 9001:2015, CMMC Level 2 self-assessment, and MIL-STD-1916 sampling methodology with zero non-conformances unless otherwise specified. Packaging must follow MIL-STD-129 and RP001 DLA packaging guidelines, with non-hazardous items conforming to commercial packaging standards unless overridden by higher-priority DLA requirements. Item Unique Identification is not required per customer request. Shipping must be conducted via traceable freight methods, not parcel post, to the designated delivery address at Tinker AFB, Oklahoma. The contract mandates strict documentation for source approval, cybersecurity compliance, and material marking, including removal of government identifiers from non-accepted supplies. The unit of issue is each (EA), with a total price of $3.00 per unit. All technical and quality requirements referenced via R or I numbers are incorporated by full text from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition scale. The delivery window is set for July 22, 2026, and the point of contact is Jackayla Pendergast at the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
THERMOSTAT, FLOW CONThis contract is for the procurement of a thermostat, flow control, part number 9844X110, manufactured by AMOT Controls Corp with CAGE code 94607, under the NSN 6685-01-288-9802. A total of four units are required at a unit price of $4.00, resulting in a total contract value of $16.00. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary, per NAVSEA 5100-003D. Packaging and shipping must fully comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and all packaging must adhere to DLA’s proprietary packaging requirements. Hazardous materials packaging regulations prohibit mercury in preservation, packaging, packing, or marking. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery timeline is 78 days from the contract award, with the original required delivery date set for July 28, 2026. The contract is a total small business set-aside under NAICS code 334519, administered by the Department of Defense, with deliveries directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract calls for the delivery of five structural plates designated as AI, identified by NSN 1560-01-716-9242, under solicitation SPE4A5-26-T-311K, with a required delivery date 197 days after award and a need ship date of May 12, 2026. The items must be supplied FOB origin with zero tolerance for quantity variance and are subject to inspection and acceptance at the destination. Packaging must comply with DLA’s specific procurement requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must adhere to RP001, and the Unit of Issue is EA. Supplier compliance with technical and quality standards referenced in the DLA Master List is mandatory, including CMMC Level 2 self-assessment, ISO 9001:2015, and requirements related to measuring equipment and removal of government identification from non-accepted items. Item Unique Identification is not required per the service customer’s request. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. Delivery is to DLA Distribution at the New Cumberland Facility in Pennsylvania, with transport instructions governed by DLAD procedural notes. The contract is under the NAICS code 336413, managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Johquin Wiley as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
New
DIBBS
COVER, SHIPPING AND STOThe contract specifies the procurement of 139 units of a shipping and storage container with NSN 8140-01-593-3819 under solicitation SPE4A5-26-Q-0654, with a delivery requirement of 323 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Documentation for source approval, packaging standards per DLA guidelines, export control compliance, and inspection procedures at origin are mandatory. Configuration changes require formal engineering change proposals for any deviation or waiver. The item is not subject to Item Unique Identification per service customer request, but all non-accepted supplies must have government identification removed. Technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons, including foreign nationals within the U.S., and requires prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Donetta Nelson as the primary point of contact, and responses must be submitted by August 9, 2026.

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIALThe contract is for a single pressure dial gage identified by NSN 6685-01-449-0699, with a delivery requirement of five days after order placement. The solicitation number is SPE4A5-26-T-312N, issued on July 28, 2026, with responses due by August 5, 2026. This item is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable control identifiers RA001, RP001, RQ011, and RQ032. Technical data associated with the gage is controlled under ITAR or EAR regulations, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Access to this export-controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD training on handling controlled technical data, have filled out the DLA questionnaire, and have received explicit approval from the DLA controlling authority. The procurement falls under NAICS code 334512 and is managed by the Department of Defense through the ASC Supplier Operations OEM Division, with Cheryl Broadie designated as the point of contact for inquiries.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
INSERTER AND REMOVEThe contract specifies the supply of five units of an insert and remove item with NSN 5120-01-472-6224 and part number A10002-7, sourced from either The Boeing Company or Aeroforge Inc, under solicitation SPE4A5-26-T-311Y. Delivery is required FOB origin within 164 days of contract award, with strict zero variance in quantity and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. All items must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, including palletization and labeling. Unit of issue is each (EA), and the contract mandates adherence to MIL-STD-1916 or equivalent zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Cybersecurity compliance requires CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies per RQ011. Physical identification of bare items follows RQ017, and item unique identification is waived per DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must meet RT001 standards, and all documentation for source approval submissions follows RC001. The delivery address, transportation protocols, and parcel post instructions are detailed, with a required ship date of January 17, 2027, and an original required delivery date of January 12, 2028.
Saw Blade and Handtool Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
CLAMP, WIRE ROPE, BOLTEDOfferors must comply with strict requirements regarding telecommunications equipment, domestic sourcing, and additive manufacturing under this solicitation. The offeror certifies that it will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must adhere to the Berry Amendment and Buy American Act restrictions, with the Berry Amendment threshold now set at $150,000. Any use of non-domestic materials requires full disclosure to the point of contact specified in the solicitation. Small business joint ventures must submit required representations for eligibility under designated small business categories. Fast Pay is not available for this procurement, and offerors are strongly encouraged to provide quantity ranges due to the fluctuating nature of purchase requests, enabling buyers to consolidate or adjust orders without resolicitation. Offers must be submitted through DIBBS, and those unable to submit by the closing date must file a “No Bid” with an anticipated quote date to avoid assumptions of non-responsiveness. Contractors must register via the new AMPS system within two months to gain access to the Vendor Shipment Module for shipping to DLA, and VSM WebServices users must update their internal schemas to maintain functionality. Offers containing items produced using additive manufacturing are ineligible for award unless prior approval is obtained from the contracting officer. The item under solicitation is a CLAMP, WIRE ROPE, BOLTED, NSN 4030-01-273-4636, with a single unit required and delivery expected 125 days after award, sourced from San Diego, California.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
SENSOR, AMBIENT TEMPThe contract specifies the procurement of one ambient temperature sensor with NSN 6685-01-700-3748 and part number DDE A0041534228 under solicitation SPE4A5-26-T-311Q, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 20 days to the Naval Expeditionary Logistics Support Group in Williamsburg, Virginia, with FOB origin terms and zero variance allowed in quantity. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking needed. Packaging must adhere to DLA packaging guidelines, and palletization is required. The sensor is to be shipped via the fastest traceable means, explicitly prohibiting parcel post, and must be delivered to the specified government address. Compliance with multiple technical and quality requirements is mandatory, including adherence to CMMC Level 2 Cybersecurity Self-Assessment, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and use of calibrated measuring and test equipment. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. The contract references the DLA Master List of Technical and Quality Requirements for all identified R and I numbers, and the item falls under NAICS code 334512. Delivery is due by July 22, 2026, and response to the solicitation was due by August 5, 2026. Government use details indicate internal tracking codes tied to the project and supplier information, with all documentation subject to DLA procedural notes and unit of issue guidance.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL INDThe contract specifies the procurement of a pressure dial indicating gage with NSN 6685-01-507-0600 and part number 1630001, under solicitation SPE4A5-26-T-311R, for a quantity of 27 units at a unit price of $27.00, totaling $729.00. Delivery is required within 55 days, FOB origin, with no variance allowed in quantity, and the item must be delivered to the designated receiving warehouse in Tracy, California. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling mandated to comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified attributes are treated as major. Physical marking and packaging must adhere to MIL-STD-129 and ASTM D3951 for non-hazardous items, or FED-STD-313 with TQ requirement IP025 if hazardous, with all DLA requirements taking precedence over commercial standards. Packaging and palletization must follow RP001 DLA packaging requirements. Inspection and acceptance occur at the destination, and the unit of issue is each (EA). The supplier must comply with all labeling, marking, and transportation instructions per DLAD proc notes C19 and C20, with the original required delivery date set for July 28, 2026.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333515
New
DIBBS
GAGE, ABSOLUTE PRESSThe contract is for the procurement of two absolute pressure gauges with part number 15PSIXP2I-S2-F4 and NSN 6685017189694 under solicitation SPE4A5-26-T-310X, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the origin. The items must be packaged in strict compliance with MIL-STD-2073-1E and marked per MIL-STD-129 with a special designation for delicate instruments. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA Packaging Requirements for Procurement and palletization standards, with shipment directed to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, identified by freight codes PTKB00 and PTKB5461146046. The original required delivery date is July 30, 2026, with the contract solicitation posted July 28, 2026, and responses due by August 5, 2026. Unit of issue is each, priced at $2.00 per unit for a total value of $4.00, and the item falls under NAICS code 333515. Government-specific identifiers and logistics data are included for internal tracking and distribution purposes.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details