Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

ROPE, WIRE

Active
SPE4A5-26-T-302KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of wire rope under NSN 4010014650897, with a quantity of 184 feet to be delivered within 36 days to DLA Distribution in San Diego, California. All supplies must comply with DLA packaging requirements and MIL-STD-2073-1E standards for preservation and packaging, including specific methods for preservation, wrapping, and containerization. Items must be marked per MIL-STD-129 with no special marking codes, and palletization must meet DLA packaging guidelines. The rope must conform to MIL-DTL-83420/2D Revision D dated October 1, 2022, and components must be sourced exclusively from qualified suppliers listed on QPL-83420-15. Zero defect sampling is required under MIL-STD-1916 or ASQ H1331, with critical attributes verified at level VII or an AQL of 0.1, and all unspecified attributes treated as major. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for functional uses such as batteries or instruments specified by NAVSEA, which must include secondary containment. The contract allows for a 10% variance in quantity and requires delivery FOB origin with inspection and acceptance performed at the destination. The supplier must meet all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, and failure to comply with QPL/QML sourcing or mercury restrictions constitutes non-conformance. The solicitation number is SPE4A5-26-T-302K, with a response deadline of July 29, 2026, and the point of contact is Jazmyn Taylor at DLA.

General Info

Procure 184 feet of wire rope per MIL-DTL-83420/2D, deliver to San Diego in 36 days, zero defect, no mercury, QPL-sourced, FOB origin.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS

Full Description

Show more
ROPE,WIRE
ROPE, WIRE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML
REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE
QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE
QPL(S)/QML(S).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
QPL-83420-15 APPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A5-26-T-302K
SECTION B
SAMPLING:
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-83420R REVISION NR R DTD 07/01/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-83420/2D(1) NOT 3 REVISION NR D DTD 10/01/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7012647058 0001 FT 184.000
NSN/MATERIAL:4010014650897
DELIVERY (IN DAYS):0036
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1000 FT PER CONTAINER
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE4A5-26-T-302K
SECTION B
PR: 7012647058 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:12/10/2025 Original Required Delivery Date:11/18/2025
SPE4A5-26-T-302K NSN/Part Number: 4010-01-465-0897 Quantity: 184 FT Purchase Request: 7012647058QTY: 184 Delivery: 36 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract is for the procurement of 17 wire rope assemblies with NSN 4010-01-606-1104 under solicitation SPE4A5-26-T-298D, issued by the Defense Logistics Agency’s ASC Supplier Oper OEM Division. Delivery is required within 171 days after award, and the solicitation response deadline is July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to CMMC Level 2 certification for third-party assessors, DLA packaging standards, and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. Item Unique Identification is waived per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) controlling. Technical data associated with the item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed DLA’s required training on handling export-controlled technical data and received formal approval from the DLA controlling authority. The place of performance is New Cumberland, PA, with Zip 17070-5002, and the primary point of contact is Hien-Van Trinh, reachable via email and phone provided.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASEThe contract specifies a procurement of 37 quick release pins identified by NSN 5315-01-677-3845 under solicitation SPE4A6-26-T-08QU, with a delivery requirement of 20 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification via a certified third-party assessment organization. The item is subject to stringent export controls under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons, regardless of location, and restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. Packaging must meet DLA requirements, and inspection and acceptance occur at origin. Non-accepted supplies must have government identification removed, and items must be physically marked per RQ017. The contract mandates tailored higher-level quality requirements for both manufacturers and non-manufacturers, and all technical data handling complies with DFARS 252.225-7048. The purchasing agency is the ASC Commodities Division of the Department of Defense, with performance delivery to APO 09853, and primary point of contact is Samantha Hopkins.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
STATOR ASSEMBLYThe contract pertains to the procurement of 102 units of a stator assembly identified by NSN 1630-01-320-6510 and part number 59002936-001 manufactured by Honeywell International Inc. The item is designated as a Critical Safety Item and a Critical Application Item, triggering stringent inspection requirements including 100% verification of critical characteristics such as dimensional tolerances of .001 inch or less, surface finishes of 16 RMS or finer, geometric tolerances of .002 inch or less, Class 3 or higher threads, angular tolerances of 1 degree or tighter, hardness, material certifications, dynamic and static balancing, special processes like welding and plating, heat treatment, and more. All items must be marked in compliance with MIL-STD-129, including contractor and actual manufacturer CAGE codes, part number, lot, and serial number if available, with no unit identification required per the service customer’s request. The contract mandates adherence to SAE AS9100 quality standards and requires a CMMC Level 2 Self-Assessment for cybersecurity compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and all documentation must satisfy DLA’s packaging and procurement requirements under RP001 and MIL-STD-2073-1E. The item is classified as a commercial item with no shelf life and is subject to a firm fixed price with no variance permitted in quantity. Inspection and acceptance occur at origin, with delivery due 620 days after award, shipped to DLA Distribution in San Diego under FOB origin terms. Waivers or deviations require explicit approval from the DSC Contracting Officer.
Precision Turned Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334513
New
DIBBS
INDICATOR, RATE OF FThe contract pertains to the procurement of one unit of an indicator with a rate of flow, identified by part number FT-32AEYS-LEAS4072 and NSN 6680015378621, issued under solicitation SPE4A5-26-T-298N. Delivery is required within 171 days from the contract date, with a required delivery date of November 28, 2026, and a need ship date of January 17, 2027. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and marking strictly following these guidelines. Sampling and verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are defined with verification levels or AQLs as mandated. The product is classified as a Critical Application Item and must have all government identification removed if non-accepted, with bare item marking as required by RQ017. Covered Defense Information applies, and all documentation must align with referenced DLA directives. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WEIGHT, WHEEL BALANCThe contract pertains to the procurement of Wheel Balancing Weights, identified by NSN 1630-01-281-8724 and part number 2609689 from Honeywell International Inc., with a quantity of 265 units. It is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List revision in effect on the solicitation issue date, and all inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Critical attributes are subject to verification level VII, major to IV, and minor to II, with AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and though Unique Item Identification is not required, physical marking per RQ017 is mandatory. Delivery is FOB origin with a 171-day lead time, and acceptance is at destination. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous, with palletization in compliance with DLA Packaging Requirements. The required delivery date is March 2, 2027, with a ship date of January 17, 2027. All shipments must be sent to the DLA San Joaquin receiving warehouse in Tracy, CA, and transportation procedures must follow DLAD Proc Notes C19 and C20. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling protocols. The contract is managed by the Department of Defense under solicitation number SPE4A5-26-T-300F, with Dominique Howard as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details